Hisense Electric LCDF0124 Part15 Subpart B-LED LCD TV User Manual TempConfidential W9HLCDF0124 2 1
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV TempConfidential W9HLCDF0124 2 1
Contents
TempConfidential_W9HLCDF0124_User Manual 2-1
STEP 3. Establish a network connection 1.Press the [El] button on the remote control, press [ v 1 button to select Settings and then press [OK] to enter the Settings menu 2. Select Network A» Network Configuration. rv JACK External Modem lP Sharer (Router) (ADSL/ VDSL/ Cable TV) lWlIh once server) it“ LAN Cable LAN Cable Modem Cable Establish a wired network connection Automatically obtain an IP address 1 Select Ethernet The TV wtll automatically obtain an H” address and connect to the network NOTE: The default option of IP Settings Mode is DHCP. 2 llr the connectlon falls then "Disconnected" will display for the Ethernet status Retry or enter the IP Settings select Manual to input the information agaln Manually enter the IP address 1.Se|ect Manual. 2.Enter the IPAddress, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu. Next, select Save. 11 Establish a wireless network connection ereless LAN Adapter bmltrln TV set The TV can dlreclly receive network slgnals via wireless router. 1.Se|ect Wireless. The list cl networks Wll| be dlsplayed aulomatlcally. 2.Se|ect a wireless network from the list, input the password and select Connect. 3. lf the network connection does not appear in the Ilst, select Refresh to relresh the list or select Add to manually enter SSID and Security rnode selection. Close the network connection Select Off. The network connectlon Wll| close. 12 Buttons on your TV remote Just for USA and MEXICO Power on / oft Enter Channels I input numbers 7 Turn Closed Caplion On/OW Live TV Volume (up/down) The button lorttie Quick setup menu Dspad (up/ouwn/iemngni navtgatiun buttons) Return to the previous oieoe m the menu nrapp Media content control tunctiun buttons Quick access buttons to apps Infrared transmitter [O m Change TV input source nu mm m ,7 Quick access buttons to PlCTUREISOUND/ASPECT/SLEEP Dash button Select a digilal subschannel Mute and restore sound VOL on Channel (up/down; 7 Mi Display tne Home screen All Apps Confirmation button Kn Exit the application is |, |\‘ .| — Special function buttons JE " [E E) I] E} Settne audio ianguagew'rs) l l :] Ds—Appsortunctiunkey UH flfl CAUTION: The included remote control will vary depending on model country and dale of manulacture. ta Just for CANADA Power on / of! Enter Channels I input numbers Turn Closed Cannon On/Otl Live TV D-pad (up/dcwn/Ieft/nghl navigation buttons) Return to the previous piece in the menu or app Volume (up/down) Media content Contrci function buttons Lej\\t JL n, A“ it m G) a) (y 7?) (a rmv ‘APPi Inirared transmitter Change TV inpu| source Dash button Select a digital Sub—channei Speciai funetlcn buttons The button for the Quick selup menu Confirmation button Exll the apphcallon Display the Home screen Mule and restore sound Channei (up/dawn) Set the audlo ianguage(MTS) Choose to ieave the Vldeo descrlption feature On or 0" Quick access buttons to apps STEP 4. Begin using your remote 1. Slide the back cover to open the battery compartment of the remote control. Insen the batteries Gently push and slide Gently push and slide 2. lnsert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries With the (+) and (-) ends indicated in the battery compartment 3. Replace the battery compartment cover, Important Information about the remote and batteries - Discard batteries in a designated disposal area. Do not throw them into a tire. - Remove old batteries immediately to prevent them from leaking into the battery compartment. - If you do not intend to use the remote control for a long time. then remove the batteries. - Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin then wash it immediately. - Do not mix old and new batteries. - Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries. i5 - Do not continue using the remote tgets warm or hot. Call our Support Center immediately on the support website. Remote Control Range Information - The remote control can work at a distance of up to 28 feet in front of the TV set. - It can work at a 30 degree horizontal or vertical angle. Program Your Universal Cable or Satellite Remote Control to Operate Your New Television (only for USA) lfyou would like to program your other household remote controls to your new television, please refer to the User Manual supplied by your Cable or Satellite provider. It should include instructions on how to program their remote to your television. A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated With your Cable or Satellite provider (if applicable). DIRECTV ..... 0178,10178,10019.10748,11314,11660,11710. 11780.12049,1D171,11204,11326,11517,11564,11641.11963, 12002, 12183 Time Warner Cable. ....386. 0178. 10178, 400. 450. 461, 456, 0748. 1463, 0463, 10463 Ccmcast ..... 0178,10178,10463,11463,10748,11314,11660, 10171,11204,11326,11517,11641,11780,11785,11892,11963, 12002 COX Communications ..... 0178, 10178, 1326, 1463 Dish Network . 505, 627, 538, 720, 659 If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's customer service center. If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 2. Using Your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal’ Remote Ii you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a “Universal Remote', then visit the Support page to View a list of the codes. 15 STEP 5. Power on the TV Plug the power cord into a wall outlet. 43'750'755" 65" WaH Ouiiet Wail Outlet Press the Power button @ on the remote to turn on the TV. A splash screen that shows the logo appears. Next, the First—Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. STEP 6. Complete the first-time setup menu After the splash screen that shows the logo appears, begin the first—tlme setup menu. t7 Screen Language and Location End User License Agreement TV Usage Network Connection Task ~ Uslhg the Broad arrows at your remote choose your Language, Country and Time Zone 4 Choose Decline or Agree‘ then select Confirm icon and press [OK]. - Select Home Mode (which appears by delault). - NOTE: ‘Store mode' should only be selected by Retailers who plan to demonstrate the TV. - llyourTv does not automatically detect an Ethernet connecllon, then use a wireless network Select your network trorn the list that dlsplays, input the password. Also you can add a hidden network Screen Task STEP 7. Begin to enjoy your TV Select your primary Seiecl how you receive yourTV charmeis YourSmaflW is easyw use and brag—worthy' input source Choose from one ol the loiiowing sources below ' HDMi ' fictT/CABLE Now that you’ve completed the first—time setup menu, the Home I COMPONENT screen is your starting point for nawgating the TV. Gone are - NONE the days where your TV oniy provides one way for you to be “P: if you use 3" antenna 10 receive Chflfiflels. entertained. This showpiece prowdes you the convenience Ihen you musl Compiele the first-time setup menu in order to ”m a channel scan. of watching a program on alive channel, acoessmg Video on Demand to watch a movie and many other entertainment options. Using your remote, press the Home button to begin enjoying your TV. Disclaimer: Subscriptions or other payments may be required to access content through some applications. Some or all of the included or downloaded application services in this Sharp, Aquos or Quattron device may not function depending on the Internet connection, local limitations of included applications or other reasons outside of the Licensor’s or Manufacturers control, ALL LICENSORS AND THE MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANYAPPLICATION SERVICE FROM FUNCTION/N6 ATAN\l TIME, FOR CONTENT IN ANVAPPLICATION SERVICE FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS, WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the Manufacturer at any time and in any territory is PRODUCT SPECIFICATIONS Modal Namo Dimension Without Stand (w x H x D) With Stand Weight Withoul Stand With Stand Active Screen Size (Diagonal) Screen Resolulion Audio Power Power consumption Power Supply Connectivity Key Apps Pens other ieelures LC-43P7UDIIU I LC-43N7002U LC-50F700IJU/ LC-50N7002U LC-55P7ODOU I LC-55N7002U I LC-55P520U LC-65P7000U I LC-55N7002UI LC-SSPSZIIU 33.2 x 22 4 x 3.5 inches (970 x 553 x as mm) 44 4 x 25.7 x 3.3 inches (1129 x 554 x 84 mm) 49.0 x 28 4 x 3 3 inches (1244 x 721 x 35 mm) 57 e x 331x 3.4 inches (1453 x 342 x 37 mm) 352x239x57inches (970 x 607 x 220 mm) 444x27Axg5inches (1 129 x 597 x 241mm) 490x300x95inches (1244 x 763 x 241 mm) 576x358><|33inches (1453 X 910 X338 mm) 21.5los(sa Kg) 22.3lbs(1o.1 kg) 293 lbs (13.3 kg) 35.3Ibs(16 kg) 52 2 lbs (23.7 kg) 30 4 lbs (13.8 kg) 35.4lbs1155 kg) 54 lbs (24.5 kg) 43 inches 49 5 inches 54 6 inches 64 5 inches 3840x2160 3840x2160 3840x2160 3840x2160 7W+7W IOW+IOW 10W+10W 15W+15W 110W 135W 160W 200W 120V~60Hz 120V~60Hz 120V~GDH1 120V~60Hz Built—in Wireless Ieature (2X2 dual band) Netflix. Vuou. VouTube. Amazon instant woeo. Pandora and Opera App (Some apps only for USA) 4 HDMi ports, 3 use poris, 1 LAN port for Ethernel,1 Digital Audio Output, 1 RF input, 1 Earphone Audio Output, 1 RCA Composite woeo input . 1 Iefl/righlAudio Inpulfor Composite. 1 RCA Component vioeo input Smart TV, Dynamic contrast Piclure, VEsA standard wall mount support. Web browser, Parental Controi and Closed Caption, High Dynamic Range processing Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise 19 QUICK PROBLEM-SOLVING TIPS When you experience an issue with yourTV, turn it off and on again. iiihis does not resoive the probiem. then refer to the tips below. If the problem is still not resolved. then Contact us atone oiihe phone numbers on Page 2. ISSUES No sound or picture I have connected an external source to my TV and I get no picture and/or sound. When l turn on my TV, there is a delay for a few seconds before the picture appears. is this normal? The picture is normal but there is no sound Sound but no picture 01 black and white picture The sound and/or piclure is dlstorled or appeals wavy The sound and picture is blurry or cuts out A horizontal or vertical stripe appears on the picture and/orths picture is shaking POSSIBLE SOLUTIONS ~ Check lrthe power cord is plugged into a powered AC outlet - Press the @ Power button on the remote control to activate the unit from 'standby‘ mode ~ Check to see lithe LED light is on or not if it ls, then the TV is recelirlng power ~ Check for the correct output connection on the external source and tor the correct input connection on the TV. ~ Make sure you have made the correct selection tor the input mode tor the incoming signal. - Ves. this is normal. The TV is initializing and searching tor preyious setting information. ' Check the voiume sefiings. ' Check iI 'M\t(e' mode is set to On. - it the picture is biack and white. unplug the TV trom the AC outlet and replug it alter so seconds - Check that the Color is set to 50 or higher - Try dlllerent TV channels - An electric appliance may he aitectlng the TV. Turn or any appliances that are nearby and move it larther away from the TV. - insert the power plug ot the TV set into another power outlet. - it using an externai antenna. check the direction position and connection orthe antenna - Adyusl the direction ot your antenna or reset or fine tune the channel ~ Check it there is an appliance or electric tool nearby that is causing interference 20 The plastic cabinet makes a - The ‘Click' sound can occur when the temperature of the televlslon Changes. Thls Change Causes the television “clicking" type of wund Cabinet to expand or contract, which makes the sound. This is normal and the TV is OK. - Confirm that TV sllll has power am is operational. The remote control does not work - Change the batteries rn the remote control. - Check if the balterles are correctly installed Need more help? Additional help is available online at support links on Page 2. You will find answers to frequently asked questions, downloadable firmware and more. 21 Certification and Compliance FCC Notice This device has been tested and found to comply With the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates. uses. and can radiate radio frequency energy and, if not installed and used in accordance With the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on. the user is encouraged to try to correct the interference by one or more of the following measures: 0 Reorient or relocate the receiving antenna 0 lncrease the separation between the device and receiver 0 Connect the device into an outlet on a circuit different from that to which the receiver is connected. 0 Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi cations to this equipment. Such modifications could void the user’s authority to operate the equipment. 22 The Wi—Fi Module complies With FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Manufactured under license lrern Dolby Laboratories Dolby. oeloyAudie arid DDLBV the double-D symbol are trademarks of Dolby Laboratories nuoio HEIITII he terms HDMl and HDMl ngh—Defiriltlon Multimedia interface, and the HDMl Logo are trademarks or registered trademarks ofHDMl Licenslrig LLC in the United States and other countries dl "HIIWI' a Manufactured under license from THAT Corporation. V THAT Corporation. dbx-tv. Total Sonics. Total Surround arid Total Volume are registered trademarks of THAT Corporation Total Technology is a trademark of THAT Corporation ©2017. All rights reserved. SHARP and the SHARP logo are registered trademarks of SHARP Other brand and product names are registered trademarks of their respective owners.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2017:06:23 14:58:25+08:00 Create Date : 2017:06:23 14:58:05+08:00 Metadata Date : 2017:06:23 14:58:25+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Format : application/pdf Document ID : uuid:b1da9f7f-a622-4cb1-9d7c-7896109ab3d7 Instance ID : uuid:744a5e92-1ffd-48f7-a8cc-957a0336c63e Producer : Adobe PDF Library 10.0.1 Has XFA : No Page Count : 12 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools