Hisense Electric LCDF0126 Part15 Subpart B-LED LCD TV User Manual
Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV
Contents
- 1. TempConfidential_W9HLCDF0126__User Manual 1-1
- 2. TempConfidential_W9HLCDF0126_User Manual 1-2-1
- 3. TempConfidential_W9HLCDF0126_User Manual 1-2-2
- 4. TempConfidential_W9HLCDF0126_User Manual 1-3
- 5. TempConfidential_W9HLCDF0126_User Manual 2-1
- 6. TempConfidential_W9HLCDF0126_User Manual 2-2
- 7. TempConfidential_W9HLCDF0126_User Manual 2-3-1
- 8. TempConfidential_W9HLCDF0126_User Manual 2-3-2
- 9. TempConfidential_W9HLCDF0126_User Manual 3
TempConfidential_W9HLCDF0126_User Manual 1-2-2
FRANCAIS ESPANOL A A Shortcuts Instructions You can use shortcuts on the remote control for last operation. Turning your TV on or off 0 To turn yourTV on: 1. Connect the power cord to the back ot the TV, then plug the power cord into an AC outlet, 2 When the TV is powered on, press the [0] button on the remote to turn onTV 0 To turn your TV otf, press the [0] button on the remote. - When your TV is in standby mode, it is still consuming power. To completely disconnect power. please remove the plug lrom the AC outlet. 0 If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. Selecting the input source Select the input Source depending on the video device you have connected to your TV. To select the input source: 1 Turn on your TV, then press the [INPUT] button on the remote, the list 01 Source appears. 2 Press the D-pad arrows oi your remote to select the input source, 3 Press the [OK] button to coniirm your selection. Using the Live TV To view broadcast programs, press the FI'V] button on your remote. Channel search guide When you select ANT/CABLE as input, it no TV channels were saved before, you will be prompted to do a channel search. Vou can also go to Setting menu > Channel to change the channel settings. Launch Live TV After channel tuning is done for the iirst time, the screen will display Live TV operating tips, including: how to load the channel list, how to Load into Bar and so on [Menu] Load more functions [0K] Load Channel List [A] Load Info Bar [BACK] Load previous channel i5 ENGLISH FRANCAIS ESPANOL A A Viewing channel information As you use the [CH+I CH-] button on your remote to scroll through channels. an information banner appears on the top of the screen 0 909 9 mm AIDS imam i» i—ii i im i mi Leu i ml rim” iLll ”new ~ mum vi “it 4 Mi matter 0 0 CD The information banner displays the tollOWing information Channel number Look status input Program name Show identification Channel name Current date and time mummewNA Beginning and end time of the next program 9 Start/Stop time progress bar of the current program 10 Prompt It you are watching a particular channeii you can also press the up arrow button of your remote to View channel information Viewing cl channel list After you have done an automatic channel scan (it you‘re using an antenna) or are receiving your channels through a cable provrder you can VlCW your list of channels by pressing [OK] on your remote. You Will see the channel list display on the right side or the screen Creating ci Favorite List To quickly access your mostrwatehed channels you can Create a Favorite List To create your Favorite List“ i Press the [ El] button on your remote 2 Press the [ v] button to select Settings, and then press [OK] button to enter the Settings menu 3 Select Channel > Favorite List. 4 Using the [A/V ] buttons or your remote, select a channel and press [OK] button A heartrshaped indicator Will appear beside the channel as confirmation that it has been successfully added Viewing your Favorite list To VIEW channels that you’ve added to your Favorite List simpiy press [OK] on your remote to call out the channel ilst The channel list appears on the right side of the screen and heart—shaped icons are shown next to the channels that make up your Favorite List You can press [ >] buttons to sWitch the channel list (Antenna or Cable) , Favorite and History list to ENGLISH FRANCAIS ESPANOL A A Using the Menu Function To quickly access menu function, press the [@ ] button on your remote Accessibility You can set Menu Audio. Video Description and High Contrast Menu on or off The function can be used to meet the needs at Visually impaired people When the Menu Audio is set on‘ the contents oi each menu display can be broadcast out When the Video Description is set on‘ you can hear the introduction of relevant programs When the High Contrast Menu is set on‘ the comparison of menu items is more vivid Number Pod You can press digital keys on the left of the screen‘ to get the relevant channels easily Picture Mode It you’d like to contigure the settings tor your picture, then there are seven types ol picture modes available Vivid‘ Standard Energy Saving‘ Theater‘ Gamer Sport and Calibrated Sound Mode Select a preset sound mode to suit the type of content you are listening to Standard Theater‘ Music, Speech and Late Night Aspect Ratio Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the lollowmg settings Autor Normalr Zoom, Wide, Directr Dot-By-Dotr Panoramic or Cinema CC You can switch between CC Otf‘ CC On and CC On Wnen Mute. Audio LongudgeiMTS) You can choose the audio language in DTV mode and you can set MTS for Mono‘ Stereo or SAP in ATV mode. Audio Only When you select this option‘ the screen Will not display the picture You can only listen the audio Press any button except the [ (D1 button‘ Volume [+/-] buttons and [IK] button to restore operation. Settings The Settings Menu consists ol the i'ollowmg settings Picture‘ Sound‘ Network‘ Channel, AccesSibility, System and Support T7 ENGLISH FRANCAIS ESPANOL A A Basic Settings Your TV comes With many TV setting ieatures to allow you to customize the picture based on your viewing preference and environment, As you navrgate throughout diiterent screens to access settings, some of the indicators appear as words On and Off Using the Settings Menu You can press the [Q] button to access the Menu, press the [ v] button on the D-pad to seiect Settings, and then press [OK] button to enter the Settings Menu The Settings Menu consists oi the iollowrng settings: - Picture ' Sound - Network - Channel - Accessibility - System - Support In each menu‘ you can: 0 Press the [ Alv ] buttons to select an item D Press the [0K] buttons to enter the sub-menu or to set on or off. 0 Press the [ > ] buttons to adjust the vaiue. 0 Press the [BACK] button to return to the previous menu 0 Press the [EXIT] button to exit the menu i8 ENGLISH FRANCAIS ESPANOL A A Picture Menu Backlight: Some models have a Dynamic Backlight Control setting that you can turn off and set to High, Middle or Low. Some models have a Local Dimming setting is available that Will enable 0 riuw=v~tw=w~ the TV to automatically adtust the backlight by sections according to the changes in image and increase the contrast The Backlight Level setting enables you to adiust how bright you want images to appear, lower settings create darker images ln addition an Automatic Light Sensor setting is available that Will enable the TV to automatically adiust the picture settings according to the amount ol ambient light in your room The Minimum Backlight setting enables you to adiust the lower point 0! the dynamic backlight adiuslmenl scope This is a money—saying leature because it reduces power consumption Backliqht rim“ . Briqh'ne Picture Mode- li you'd like to contigure the settings for your picture. then there are seven types ot picture modes available Vivid, Standard. Energy Saving, Theater, Game. Sport and Calibrated Once you choose the mode, you can adiust the picture based on the tolloWing settings Contrast: Adtust the Contrast level to increase or decrease how bright images appear. Brightness: Adiust the Brightness level to generate lighter or darker images Color: Adtust the color intensity of the picture for a more vibrant image Tint: Adiust the colors from a green to magenta tint to View the natural skin tones of people on the screen Sharpness: Adiust how sharp or salt edges ot images appear Aspect Ratio: Adtust the Aspect Ratio to stretch or zoom in on your picture You can choose from the iolloWing settings Auto, Normal, Zoom, Wide, Direct, Dot-By-Dot, Panoramic or Cinema. HDMI 2.0 Format: Match the connected device output format Select Enhanced tor devices of 4K SOHZ, 4 4 A 4 2.2 or 4.2 O, to hit and above. Advanced Picture Options: Adtust advanced picture settings based on your vieWing preference - Overscan: Change the video size settings to slightly crop the edges ol the displayed image - Color Temperature: Select a preset color temperature Adiust how warmtred) or cool(blue) the white areas of an image appears 0 Motion Enhancement: This setting minimizes atterimages that are lelt on the screen when vieWing tasten‘ioving obiects Vou can adiust it from Smooth, Standard, Clear FilmCustom or Ott A Smooth setting Will produce a smoother picture whereas a Clear setting Will result in a picture that has less iuddei (shaking) 0 Judder Reduction: To enhance picture smooth, please try to reduce picture iudder, but it may cause picture blur 0 Blur Reductio 'To avoid missing picture details, please try to reduce blur but it may cause picture tluter. - Some models don‘t support the function of Motion Enhancement, Judder Reduction or Blur Reduction. - Digital Noise Reduction: improve how clear the picture appears by reducing noise - HDMI Dynamic Range: Adiust the HDMI signai range to be more suitable for the content, 0 Active Contrast: Automatically darken dark areas and lighten light areas of images to see more details 0 Color Space: Change the range of colors the TV displays - Somc modcls don‘t support this tunction Expert Settings: - Color Tuner: Adjust the Hue, Saturation and Brightness of color settings - White Balance: Adiust the intensity or red, green and blue iights to View the true colors or all images in the picture . Gamma Adjustment: Adiust the Gamma to choose how the TV Will respond to the content grayscale ln a dark room choose a Higher number like 2 In a brighter area select a lower number like 0, ln general, 1 is normally recommend l? FRANCAIS ESPANOL A A - Some rnodeis don t support this function - RGB Only Mode: view images based on default settings or endose the coior red blue or green 0 Apply Picture Settings: Adjust current picture rnode to apply to all sources or iust current source o Reset Picture Settings: Reset all the picture settings in the current picture mode to the lactory default values Sound Menu o Sound Mode: Select a preset sound rnode to suit the type of content you are listening to Standard, Theater‘ Music, Speech Saiiridiiim "rim and Late Night Set the sound ellects to suit your preference Contigure your audio settings tor your sound preterences Once you choose the model you can adjust the audio based on the toiioWing r i.~niii.imiv.iiur. settings idunnflfiufliciemnr o TQEISoniu‘ Total Sonics: Optimizes overall sound quality by tau-iirriiiiniri mm increasing bass‘ making dialog ciear and naturai and Widening the sound fieid . ToTEISurrwnd" Total Surround: Provides surround sound experience With psychoacoustic processing to place sounds beside‘ behind, and above the vieWer For best results use With Total Sonics. . TontIVoiume‘“ Total Volume: Maintains consistent ioudness ievels frorn Wide dynamic range programs todioud commerciais. and channei or input changes. 0 Wall Mount setup: Automatically optirni7e the sound based on the position of the TV t Advanced Audio Settings: Tune the audio settings and quality oi the TV 0 Balance: Ad|ust the left and right speaker strength to optimize audio for a speoiiic location - TV Speaker: Disabic the TV spcakcr thn you arc using a sound bar, ARC or any othcr cxtcrnai audio amplificr. - Digital Audio Out: Seiect the digital audio output tormat that best suits the audio device type. For exampie‘ choose RAW (Which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM it you have an arnpiifier that does not support Doiby Digitai technology. - Digital Audio Delay: Adlust the digitai audio output delay time to sync sound from an externai speaker With the images on the TV ' Lip Sync: Synchronize the dispiayed image with the audio output - Equalizer: Boost the volume at dillerent freouencnes 0 Preferred Audio Language: Sel the default audio output language tor the type oi digital broadcast content that you’re vieWing - Audio Out: Changc the Way audio is sent through thc type of dcvicc that‘s conncctcd to your TV Audio Out port. 0 Fteset Default Audio Settings: Reset aii of the audio settings in current audio mode to the factory defauit values 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2017:08:07 19:26:26+08:00 Create Date : 2017:08:07 19:26:14+08:00 Metadata Date : 2017:08:07 19:26:26+08:00 Format : application/pdf Title : untitled Document ID : uuid:88ed75a3-8223-4fd8-83fc-ae863f035c68 Instance ID : uuid:8cedf39c-f8dc-47e6-9ad1-ae2612f69e93 Producer : Acrobat Distiller 7.0 (Windows) Page Count : 6EXIF Metadata provided by EXIF.tools