Hisense Electric LCDF0129 LED LCD TV User Manual TempConfidential W9HLCDF0129 2

Download:
Mirror Download [FCC.gov]
Document ID	3449561
Application ID	eVTWbd5LADWXoYmlk0HOKA==
Document Description	TempConfidential_W9HLCDF0129_User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	232.4kB (2905048 bits)
Date Submitted	2017-07-04 00:00:00
Date Available	2018-01-06 00:00:00
Creation Date	2017-06-14 11:04:13
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-06-29 13:38:14
Document Title	TempConfidential_W9HLCDF0129_User Manual 2
Document Creator	Adobe InDesign CS6 (Macintosh)

Establish a wireless network connection
ereless LAN Adapter
bmltrln TV set
The TV can dlreclly receive network slgnals via wireless router.
1.Se|ect Wireless. The list cl networks Wll| be dlsplayed aulomatlcally.
2.Se|ect a wireless network from the list, input the password and select Connect.
3. lf the network connection does not appear in the Ilst, select Refresh to relresh the list or select Add to manually enter SSID and
Security rnode selection.
Close the network connection
Select Off. The network connectlon Wll| close.
12
Buttons on your TV remote
BUTTON
(D
INPUT
Number
CC
(Red I Green I
Yellow I Blue)
TV
A/V/
OK
BACK
EXIT
DESCRIPTION
Power on / off
Change TV input source
Enter Channels / input numbers
Turn Closed Caption OnIOff
Dash button / Select a digital sub—channel
Special function buttons
L|ve Tv
The button for the Quick setup menu
D-pad (up/down/left/right navigation buttons)
Confirmation button
Return to the previous place in the menu or
app
Exit the application
BUTTON
+v0L-
+ cu —
ul<
MTS
«/>/»III
II
NRT
APP
DESCRIPTION
D|sp|ay the Home screen
Volume (up/down)
Channel (up/down)
Mute and restore sound
Set the audio language(MTS)
Media content control function buttons
Choose to leave the Video description feature
On or Off
Quick access buttons to apps
NOTE: The buttons are only for reference, actual remote may
vary in appearance.
STEP 4. Begin using your remote
1. Slide the back cover to open the battery compartment of the
remote control.
Gently push arid slide Insert the batteries Gently push and slide
2. Insert two AAA size batteries, Make sure to match the (+) and (-)
ends of the batteries With the (+) and (-) ends indicated in the
battery compartment.
3. Replace the battery compartment cover,
Important Information about the remote and batteries
- Discard batter s in a designated disposal area. Do not
throw them into a fire.
- Remove old batteries immediately to prevent them from
leaking into the battery compartment.
- If you do not intend to use the remote control for along
time, then remove the batteries.
- Battery chemicals can cause a rash. If the batteries leak,
clean the battery compartment with a cloth. If chemicals
touch your skin then wash it immediately.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable
(Nicd, NiMH, etc.) batteries.
- Do not continue using the remote if it gets warm or hot.
14
Call our Support Center immediately on the support
website.
Remote Control Range Information
a The remote control can work at a distance of up to 26 leet in
lront of the TV set.
a It can work at a 30 degree horizontal or vertical angle.
Program Your Universal Cable or Satellite Remote
Control to Operate Your New Television (only for
USA)
If you would like to program yourother household remote controls
to your new television, please refer to the User Manual supplied
by your Cable or Satellite provider. It should include instructions
on how to program their remote to your television.
A list of codes for the most common Cable and Satellite providers
are listed below. Use the code that is associated With your Cable
or Satellite provider (if applicable)
DIRECTV.....0178,10178.10019,10748.11314,11660,11710,
11780,12049,10171.11204,11326,11517,11564,11641,11963.
12002, 12183
Time Warner Cable ...... 386, 0178, 10178, 400, 450, 461, 456.
0748, 1463. 0463. 10463
Comcast ..... 0173,1017a,10463,11463,1o74s,1131411660, STEP 5_ Power on the TV
10171,11204,11326,11517,11641,11780,117as,11892,11963,
12002 Plug the power cord into a wall outlet.
COX Communications... .0178, 10178, 1326, 1463
Dish Network... .505, 627, 538, 720, 659 55" 65"
If the code associated With your Cable or Satellite provider is
not listed, does not work or you cannot locate the instructions to
program your remote, call your local Cable or Satellite provider's
customer service center.
If your Cable or Satellite provider does not have a code available,
please contact us at one ol‘ the phone numbers on Page 2
Using Your Cable Set-top Box or Satellite Receiver
Remote as a ‘Universal’ Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a “Universal Remote', then visit the Support page to
view a list of the codes
Wall Outlet Wall Outlet
15
Press the Power button @ on the remote to turn on the TV A STEP 6_ Commete the first_time setup menu
splash screen that shows the logo appears. Next, the First—Time
Setup Menu begins by prompting you to choose your Language, After the spiash screen that shows the logo appears, begin the
Country, and Time Zone. first—time setup menu.
Screen Task
Language and - Using the D—pad arrows at your remote, choose
Location your Language, Country and Time Zone.
End User License ' Choflse Decline or Agree, then seiect Confirm
Agreement icon and press [UK].
TV Usage - Select Home Made (which appears by default),
- NOT Store mude' shuuld only he seiected oy
Retal ers who pian to demonstrate the TV.
Network - llyour TV does not automatlcaily detect an
Connection Ethernet connection, then use a Wireless network
Select your network from the list that displays,
input the password. Also you can add a hidden
network
to
screen Task STEP 7. Begin to enjoy your TV
Select your primary Select how you receive your TV channels You, 5 mart TV is easy to use and brag—worlhyl
input sourcg Choose from one ol the following sources below
' HDMl
' fill/CABLE Now that you’ve completed the first—time setup menu, the Home
: NONE screen is your starting point for navigating the TV. Gone are
TIP: |r you use an antenna to receive Channels‘ the days where your TV only provides one way for you to be
the" you must Complfle the WSHWHE setup entertained. This showpiece provides you the convenience
menu m order to m" a manna scan of watching a program on a live channel, accessing Video on
Demand to watch a movie and many other entertainment options.
Using your remote, press the Home button to begin enjoying your
TV.
Disclaimer: Subscriptions or other payments may be required to access content through some applications Sorne or all of the included
or downloaded application sen/ices in this Sharp, Aquos or Quattron device may not function depending on the Internet connection,
local limitations of included applications or other reasons outside of the Licensor‘s or Manufacturers control, ALL LICENSORS AND THE
MANUFACTURER EXPRESSLY DISCLAIM RESPONSIBILITY FOR ANYAPPLICATION SERVICE FROM FUNCTIONING ATANY
TIME, FOR CONTENT IN ANVAPPLICATION SERVICE, FOR DISRUPTIONS OF SERVICE, LOCAL OR REGIONAL LIMITATIONS,
WARRANTIES OF TITLE, NO INFRINGEMENT, AND FOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, By purchasing this device, you accept such Disclaimer without any claim on any Licensor and/or the
Manufacturer at any time and in any territory
17
PRODUCT SPECIFICATIONS
Model Name
Dimension Without Stand
(w x H x D)
LC-55PGBIJOU I
55P62
LC—GSPSDDDU
490x284x33lnches
(1244 x 721 x 35 mm)
575x331x34lnches
(1463 x 842 x 87 mm)
WiIh Stand 49.0 x so 4 x 10.6 incnes 57.6 x 35.3 x 13.3 inches
(1244x773x269nini) (1463x910x338 nirn)
Weight Without stand 35.3 lbs (15 kg) 52.2 lbs (23.7 Kg)
With Stand 35.4 lbs (15 5 kg) 54 lbs (24 5 kg)
Active Screen Size (Diagonal) 54 6 Inches 54 5 incnes
Screen Resolution 3 840 x 2 160 3 340 x 2 160
AudioPower 1ow+1ow 15w+15w
Power consumption 170W zoow
Power Supply 120 v ~ 60 Hz 120 v ~ so Hz
Connectivity Built—in Wireless ieature (2x2 dual band)
Key Apps Netflix. Vuou. YuuTuhe. Amazon lnslanl Video. Panoora and Opera App (Some apps only lor USA)
Porls 3 HDMI ports. 1 USE port. 1 LAN port loi Elnernet. ‘i Digital Audio Output. 1 RF input. 1 Earphone Audio Oulput.
1 RCA Composite Video input. 1 left/rigntAuoio lnputforCornposile
Olherleatures Srnar1 TV. Dynamic contrast Picture. VESA standard wall mount support. Web browser. Parental Conlrol and Closed
Caption. High Dynamic Range (HDR‘)
‘HDR Viewing experience WiII vary by model. content availability and lnternet connection
Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or
otherwise.
15
QUICK PROBLEM-SOLVING TIPS
When you experience an issue WlIh yourTV, turn it off and on again. Iithls does not resolve the problem. then refer to the tips below. If
the problem ls still not resolved. then contact us atone oflhe phone numbers on Page 2
ISSUES POSSIBLE SOLUTIONS
~ Check tithe power cord ls plugged into a powered AC outlet
No sound or picture - Press the @ Power button on the remote control to activate the unlt trorn Standby‘ mode,
~ Check to see tithe LED llghl IS on or not it it rs, then the Tv ls receryrng power
I have connected an external
source to my TV and I get no
picture and/or sound.
~ Check for the correct output connection on the external source and tor the correct input connectlon on the TV.
~ Make sure you have made the correct selectlon for the input mode for the incoming slgnal
When l turn on my Tv, there is a
delay tor a tew seconds before the - Yes, this ls normal The Tv is initializing and searching for prevlous setting lniormatron.
picture appears. Is this normal?
The picture is normal but there is - Check the Volume seitlngs
no sound - Check lf 'MuIe' mode ls set to On.
- it the plcture ls black and white, unplug the TV trom the AC outlet and replug it alter so seconds.
- Check that the Color is set to 50 or higher
- Try driterent TV channels.
Sound bul no picture or black and
white picture
~ An electric appilance may be aflectlng the Tv. Turn on any appliances that are nearby and move it farther away
from the Tv.
~ insert the power plug ot the TV set into another power outlet
The sound and/or picture is
distorted or appears wavy
The sound and picture is blurry or ~ it using an external antenna. check the dlrection, position and connecllon ot the antenna
cuts out ~ Adlust the dlrecticn or your antenna or reset or flrle tune the channel
A horizontal or vertical strips
appears on the picture and/ortns - Check rt there is an appliance or electric tool nearby that is causing interference
picture is shaking
t9
The plastil: cabinet makes a - The 'clrck’ sound can occur when the temperature of the television changes This change Causes the television
"clicking" type at sound cabinet to expand or contract‘ which makes the sound. This is normal and the TV is OK.
- Confirm that TV still has power and is operational
The remote control does not work - Change the batteries in the remote contml.
- Check it the batteries are correctly installed.
Need more help?
Additional help is available online at support links on Page 2. You will find answers to frequently asked questions,
downloadable firmware and more.
20
Certification and Compliance
FCC Notice
This device has been tested and found to comply With the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy
and. if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can
be determined by turning the device off and on. the user is
encouraged to try to correct the interference by one or more of the
following measures:
a Reorient or relocate the receiving antenna.
o lncrease the separation between the device and receiver.
| Connect the device into an outlet on a circuit different from that
to which the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for
help.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized mod ‘ons
to this equipment. Such modifications could void the
user’s authority to operate the equipment.
21
The Wi—Fi Module complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This device should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
Manufactured under lioense from Dolby Laboratories Dolby, DolbyAudio, and
Dunn! ttie double-D symbol are trademarks of Dolby Laboratories
AuDio
HDITII
The terms HDMl and HDMl High'DEi‘lrtltlcfl Multimedia lriterface,
and the HDMl Logo are trademarks or registered trademarks
of HDMl Licensing LLC in ttie United States arid other countries,
d'b"“”llllllllli“‘t E Manufactured under license from THAT Corporation.
- V THAT Corporation, dbx-tv, Total Sonics, Total Surround
and Total Volume are registered trademarks of THAT
Corporation Total Technology is a trademark of THAT Corporation
©2017. All rights reserved. SHARP and the SHARP logo are registered
trademarks of SHARP Other brand and product names are registered
trademarks of their respective owners

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2017:06:14 11:04:13+08:00
Metadata Date                   : 2017:06:29 13:38:14+08:00
Modify Date                     : 2017:06:29 13:38:14+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:fa27d61f-c3fb-401e-beb7-ac25904f8f29
Original Document ID            : xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Document ID                     : xmp.id:CDB534EB07206811822A848F974862BB
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:CCB534EB07206811822A848F974862BB
Derived From Document ID        : xmp.did:C5E81D7407206811822A848F974862BB
Derived From Original Document ID: xmp.did:2E025DAB6B1AE1118638882CBCDE8A8A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2017:06:14 11:04:13+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Has XFA                         : No
Page Count                      : 10
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools