Hitachi Cable WIP-3000 WLAN IP Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	622809
Application ID	5IdrwlKKJwm2OLHhdRR22g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.8kB (434996 bits)
Date Submitted	2006-01-25 00:00:00
Date Available	2006-01-25 00:00:00
Creation Date	2006-01-18 17:07:24
Producing Software	pdfFactory Pro v1.57 (Windows 2000 Korean)
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - WirelessIP 3000_Userguide_FCC_IC_CE Style_eng_4.doc
Document Creator	pdfFactory Pro http://www.pdffactory.com
Document Author:	ì‹ ê²½ê·

WirelessIP3000 User Guide
WirelessIP3000
User Guide (v.2.2.0)
Unidata Communication Systems Inc.
WirelessIP3000 User Guide
COPYRIGHT NOTICE
UniData Communication Systems is registered trademarks of UniData Communication Systems Inc. Other
referenced trademarks are trademarks (registered or otherwise) of the respective trademark owners.
This document is confidential and proprietary to UniData Communication Systems Inc. No part of
thdocument may be reproduced, stored, or transmitted in any form by any means without the prior written
permission of UniData Communication Systems Inc.
Information furnished herein by UniData Communication Systems Inc., is believed to be accurate and
reliable. The authors have used their best efforts in preparing this material. These efforts include the
development, research, and testing of the theories and programs to determine their effectiveness.
However, UniData Communication Systems assumes no liability for errors that may appear in this
document, or for liability otherwise arising from the application or use of any such information or for any
infringement of patents or other intellectual property rights owned by third parties which may result from
such application or use. The products, their specifications, and the information appearing in this document
are subject to change without notice.
Printed in Korea
© 1998-2005 by UniData Communication Systems Inc. All rights reserved.
Unidata Communication Systems Inc.
WirelessIP3000 User Guide
Table of Contents
1. SAFETY INFORMATION ...................................................................................................................................... ２
2. HOW THE KEY WORKS....................................................................................................................................... ３
3. ACCESSORY............................................................................................................................................................ ４
3.1 GUIDELINES FOR USE OF ACCESSORY ................................................................................................
3.2 AVAILABLE ACCESSORY ...........................................................................................................................
3.3 INSERTING BATTERY...................................................................................................................................
3.4 RELEASING BATTERY .................................................................................................................................
3.5 CHARGING BATTERY WITHOUT DESKTOP CHARGER................................................................
４
４
４
４
５
4. ICONS ON DISPLAY .............................................................................................................................................. ６
5. INPUT METHOD .................................................................................................................................................... ７
6. APPLICATION ........................................................................................................................................................ ８
6.1 OUTBOUND CALL ..........................................................................................................................................
８
6.1.1 APPENDIX (OPTIONS, DIAL MODE) .............................................................................................................. ８
6.2 INBOUND CALL ...............................................................................................................................................
6.3 PHONE BOOK MENU ....................................................................................................................................
９
９
6.3.1 ADD NEW ENTRY ............................................................................................................................................. ９
6.3.2 CALL FROM PHONE BOOK .......................................................................................................................... １０
6.3.2.1 APPENDIX (SUB MENU, DIAL MODE) .................................................................................................. １１
6.3.3 EDIT GROUP ................................................................................................................................................... １２
6.3.4 DELETE ALL ................................................................................................................................................... １３
6.4 MESSAGE MENU ........................................................................................................................................
１３
6.4.1 RECEIVED MESSAGE BOX ..........................................................................................................................
6.4.1.1 APPENDIX (SUB MENU)...........................................................................................................................
6.4.2 WRITE MESSAG ............................................................................................................................................
6.4.3 TEMPORARY BOX .........................................................................................................................................
6.4.4 SENT MESSAGE BOX ...................................................................................................................................
6.4.5 DELETE ALL ..................................................................................................................................................
１４
Unidata Communication Systems Inc.
１４
１６
１７
１７
１８
WirelessIP3000 User Guide
6.5 CALL LOG MENU.......................................................................................................................................
１９
6.5.1 APPENDIX (OPTION, DIAL MODE) ............................................................................................................ ２０
6.5.2 SHOW MORE INFORMATION AND CALL FROM CALL LOG .................................................................. ２０
6.6 PRESENCE MENU.......................................................................................................................................
6.7 SETUP MENU................................................................................................................................................
２１
6.7.1 BELL / VIB. .....................................................................................................................................................
6.7.2 PHONE LOCK ..................................................................................................................................................
6.7.3 ALARM ............................................................................................................................................................
6.7.4 VOLUME .........................................................................................................................................................
6.7.5 ERROR NOTIFY ..............................................................................................................................................
6.7.5.1 SERVICE LAMP ...........................................................................................................................................
6.7.5.2 ERROR MSG. ...............................................................................................................................................
6.7.6 INFORMATION ................................................................................................................................................
6.7.7 ADVANCED .....................................................................................................................................................
6.7.7.1 TIME .............................................................................................................................................................
6.7.7.2 CONTRAST ..................................................................................................................................................
6.7.7.3 LANGUAGE .................................................................................................................................................
6.7.7.4 CALLER ID .................................................................................................................................................
6.7.7.5 USER DATA RESET .....................................................................................................................................
２３
6.8 NETWORK .....................................................................................................................................................
３２
２３
２４
２５
２６
２６
２６
２６
２７
２９
２９
３１
３１
３１
３１
6.8.1 SITE SCAN ....................................................................................................................................................... ３２
6.8.2 PING TEST ....................................................................................................................................................... ３２
6.8.3 NETWORK RELOAD ...................................................................................................................................... ３４
7 WEB CONFIGURATION TOOL........................................................................................................................ ３５
7.1 ABOUT WEB CONFIGURATION TOOL ...................................................................................................... ３５
7.2 LOGIN PROCESS............................................................................................................................................. ３５
7.3 USING THE WEB CONFIGURATION TOOL .............................................................................................. ３６
8. FAQ........................................................................................................................................................................ ３７
9. GLOSSARY .......................................................................................................................................................... ３８
10. MENU CONSTRUCTION .................................................................................................................................... 40
Unidata Communication Systems Inc.
WirelessIP3000 User Guide
Revision History
Version
Date
Description
Release Version
Application
Unidata Communication Systems Inc.
Page 1
Bootrom
WirelessIP3000 User Guide
How the key works
1. Safety Information
These safety warnings apply to the Wireless IP Phone WirelessIP3000. Please read the following sections
before Installing or using your WirelessIP3000.
1.1 Emergency Services Warning
This phone will not be able to access emergency services during a power outage because of reliance on
utility power for normal operation. Alternative arrangements should be made for accessing emergency
services.
1.2 Explosive Gas Warning
The use of the WirelessIP3000 in hazardous environments where high level of explosive gas may be
Present is not recommended. Check with the site safety engineer before using any type of wireless device
in such an environm8ent.
1.3 Battery Disposal Warning
Do not dispose of the battery pack in fire or water. The battery may explode if placed in the fire.
1.4 Battery Safety Notices These Battery safety notices apply to the batteries that are approved by the
WirelessIP3000 manufacturer.
Ø
Ø
Do not disassemble, crush, puncture, or incinerate the battery pack.
To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the
battery contacts.
Ø
Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte,
wash the exposed area with soap and water. If the electrolyte has come in contact with your eye,
flush the eye with water for 15 minutes and seek medical attention
Ø
Ø
Ø
Do not charge the battery pack if the ambient temperature exceeds 40 degrees Celsius.
Do not keep the battery pack in temperatures above 60 degrees Celsius.
When discarding a battery pack, contact your local waste disposal provider regarding local
restrictions on the disposal or recycling of batteries.
Ø
To obtain a replacement battery, contact your local dealer. Use the batteries that are provided by
WirelessIP3000 manufacturer only.
Ø
Use the power supply that is provided by WirelessIP3000 manufacturer only.
1.5 Regulatory Compliance Standards
WirelessIP3000 does not comply with any standards. Use only as a Marketing Sample.
Unidata Communication Systems Inc.
Page ２
WirelessIP3000 User Guide
How the key works
2. How the key works
LEFT SOFT
Use it for entering menu, editing something, saving phone number, and
changing character input.
RIGHT SOFT
Use it for searching, going back to previous screen, shortcut to presence
menu, and muting.
MULTI FUNCTION KEY
1. Menu browsing
1) Pressing the key to LEFT direction changes the display to the
previous screen
2) Pressing the key to RIGHT direction changes the display to the
next screen for the item you selected in either menu or setup.
3) Pressing the key to UP or DOWN direction allows you to scroll up
or down the menu or setup screen.
2. Editing
1) Pressing the key to LEFT direction moves the cursor left.
2) Pressing the key to RIGHT direction moves the cursor right.
CLEAR
In text editing, deletes one character (backspace). While browsing
menu, goes back to the previous menu.
SEND
Use this key to make and receive calls.
END
During a call, it disconnects the call. While browsing menu, it exits menu.
Power ON: holding it down till ‘Loading…’ message shows up.
Power OFF: holding it down for a second or longer.
DIAL PAD
Dial pad is for dialing just like the normal telephone and entering
alphanumeric characters when editing names and phone numbers.
Also, it can be used for quick menu browsing.
Unidata Communication Systems Inc.
Page ３
WirelessIP3000 User Guide
Accessory
3. Accessory
3.1 Guidelines for Use of Accessory
Follow these guidelines in using accessories with your Wireless IP Phone WirelessIP3000.
When disconnecting the power cord of any accessory, grasp by the plug, not the cord and pull.
Keep the accessories away from children.
Use only charger, batteries, accessories that are approved by the WirelessIP Phone manufacturer.
Using unapproved charger, batteries, and accessories may be dangerous, and may invalidate the
warranty on your phone.
3.2 Available Accessory
Extended Battery
AC Adapter
Desktop Charger
USB Cable
3.3 Inserting Battery
Place the battery into the battery bay on the back side of the phone and push up towards the release button
until it clicks.
3.4 Releasing Battery
Take the battery off from the phone by pressing the release button and pull out the battery towards the
bottom of the phone.
Note : For more information about releasing battery, refer to page 10.
Unidata Communication Systems Inc.
Page ４
WirelessIP3000 User Guide
Accessory
3.5 Charging Battery without Desktop Charger
Step 1. Plug the AC adapter into a wall outlet.Step 2. Remove the protective connector cover of the phone.
Step 3. Insert the AC adapter connector into base of the phone.
Note : It is also possible to charge the phone by using the USB cable instead of the
AC adapter as shown in Figure 6.
Unidata Communication Systems Inc.
Page ５
WirelessIP3000 User Guide
Icons on Display
4. Icons on Display
Indicate vibration mode is on.
Indicate alarm is on.
It gets displayed when ring
It gets displayed when alarm
mode is set to vibration.
clock setup is on.
Indicates new message(s).
Indicate lamp mode is on.
It gets displayed when there is/are
LED blinks when there is
new messages(s) that has not
an incoming call.
been read
Indicate key lock.
Indicate signal strength.
While this mode is on,
More bars displayed
pressing keys will do nothing
indicate better isolation
Indicate user is online.
Indicate battery life.
For more description
More bars displayed
refer to below.
indicate more energy.
Figure 1. Icons on Display
Status message of idle mode display
Indicates user is online.
Indicates user is busy.
Indicates user is going to be right back.
Indicates user is away for a while.
Indicates user is on the phone.
Indicates user is out to lunch.
Indicates user is offline.
Unidata Communication Systems Inc.
Page ６
WirelessIP3000 User Guide
Input Method
5. Input Method
Dial pad is formed with integer 0~9, *, and # and used for inputting 3 or 4 alphabet letters and some
symbols. Once a Dial key has been pressed, pressing it again while the rectangular cursor keeps blinking
will change the current input to the next letter assigned for that specific key. See the table below for the Dial
key assignment. Note that after the rectangular cursor blinks couple of times, it will change into a vertical
bar cursor.
Dial Pad
Key
Space
Dial Pad
Key
Space
Dial Pad
Unidata Communication Systems Inc.
Key
Font
Page ７
WirelessIP3000 User Guide
Application
6. Application
6.1 Outbound Call
Once registered, you can
Dial number & press Send
If Callee receives your call,
make calls to others that are
Key. If your call reach the
timer starts activating on the
registered to the same SIP
other party, you will hear ring
top of the screen.
server.
back tone
6.1.1 Appendix (Options, Dial Mode)
1. Prefix = 0
If you dial a desired number,
2. 184 = 184
you can see the Option
3. 186 = 186
Menu and Dial Mode. Let’s
When you select, each
see what can we do with this
numbers will go in front
menu.
of dialed number.
You can save the dialed
You can see the search result that
number as Phone Book Menu.
the number you dialed.
Note : You can see the search result of dialed number
only if the number was already saved in Phone Book.
Unidata Communication Systems Inc.
Page ８
WirelessIP3000 User Guide
Application
6.2 Inbound Call
Once registered, you
If someone calls you, it says
If you receive a call, timer
can also receive calls.
"Incoming call" on the top of the
activates on the top of the
screen and displays caller number.
screen.
6.3 Phone Book Menu
Enter Phone book.
Use Left Soft Key to
enter the menu from idle
screen.
6.3.1 Add New Entry
You can store info such as phone number of your family, friends and others. It must have
at least one stored number in the phone book to search.
Input information:
Name → Read Name → Phone Number →
If you press Enter Key to save
Group → Index. After done inputting information you need,
without entering any data,
press Enter Key to save.
 message pops up.
It is not required to fill everything out
but the Phone number is essential.
Unidata Communication Systems Inc.
Page ９
WirelessIP3000 User Guide
Application
6.3.2 Call from Phone Book
Calling from the Phone Book is another way to make a call instead of dialing from idle screen.
So as to do, you need to search phone number stored in Phone Book by following the steps below.
There are 5 ways to search the number.
① By Kana
② By Name
③ By Phone Number
④ By Group
⑤ By Index
If you didn’t input the exact information
Select Andy and press Enter Key then it
whichever way among the above, phone will
will show Andy’s information: Read
search the name or number that contains the
Name, Phone Number, Group and Index.
input character that you entered.
Note : For example, let’s say that one person is Kim, and second person is Kimberly. They both have
‘K’ in their name.
So if you don’t want to enter whole name to search one person by Name,
you can just input one letter ‘K’ then press Enter Key. Result will show Kim and Kimberly.
Press Send Key or Enter Key wherever
the focus at can make a call to the
person.
Unidata Communication Systems Inc.
Page １０
WirelessIP3000 User Guide
Application
6.3.2.1 Appendix (Sub Menu, Dial Mode)
You can see the Appendix Menu at
Search Result by name.
Press Left Soft key to enter Sub Menu.
You can store another
You can edit the stored
You can delete the stored
phone number in here.
number in here.
number in here.
You can send SMS message
You can add a friend to
directly in here, Instead of
presence menu friends list.
sending at message menu.
Unidata Communication Systems Inc.
Page １１
WirelessIP3000 User Guide
Application
6.3.3 Edit Group
This section explains you how to add, delete or edit group.
Undefined is a default group, which cannot
be edited or deleted. You can add or edit a
group by using Options menu.
Note : Maximum 10 groups can be
made.
The picture on the left shows adding a group
named as “WirelessIP”. Press Enter Key to
save a new group and it goes back to Phone
Book menu.
Use Options menu or select a group you
want to edit and press Enter Key.
Press Enter Key again to save and it goes
back to Phone Book menu.
Before using Options menu to delete the
cursor should be at the group you want to
delete. Press Enter Key to delete.
Removed dialog will disappear in a second; it
goes back to Phone Book menu.
Unidata Communication Systems Inc.
Page １２
WirelessIP3000 User Guide
Application
6.3.4 Delete all
This function deletes all the phone numbers stored in Phone Book but the groups don’t get deleted.
Select “Delete all” and
Phone will ask you to
Selecting “Yes” will show
In a second, “Removed”
press Enter Key.
make confirmation. Use
the process of deleting
dialog shows and it goes
◁▷ key to choose
the entire Phone Book
back to Phone Book
“Yes” or “No”.
datum.
menu.
6.4 Message Menu
Message is used for short communication by transmitting words to each other.
Use Left Soft Key to select
Select “Message” and press
the menu from the idle
Enter Key.
screen.
Unidata Communication Systems Inc.
Page １３
WirelessIP3000 User Guide
Application
6.4.1 Received Message Box
All the messages you received get stored in here. If you want to see old/new messages check
the “Received Message Box”.
Select “Recv. Msg Box” and
If there are unread messages, it will show the dialog how many
press Enter Key.
unread messages are left. Right after that dialog disappears, it
will show the list of messages.
Select the message you want to read in larger window and press
Enter Key then screen will look like picture on the left.
Ø
You can see the entire message manually by using △▽ key.
*Message contains the date, time, phone number and contents.
6.4.1.1 Appendix (Sub Menu)
u Reply
You can reply straightly to the person
who has sent the message to you.
Unidata Communication Systems Inc.
Page １４
WirelessIP3000 User Guide
Application
u Forward
You can forward received
message to another person.
u Save
You can store the number who
has sent you the message.
u Delete
You can delete a message here.
Unidata Communication Systems Inc.
Page １５
WirelessIP3000 User Guide
Application
6.4.2 Write Messag
You can write and send message here.
Select “Write Msg” and press
Use dial pad and Left Soft Key to
Enter the number that you
Enter Key.
write a message.
want to send a message
* Holding down a Clear button
to.
clears the whole text.
It shows the process of
Select “Yes” by using ◁▷
sending a message.
key and press Enter Key to
delete.
Unidata Communication Systems Inc.
Page １６
WirelessIP3000 User Guide
Application
6.4.3 Temporary Box
When you don’t want to send
If you want to save it at
a message at that moment
Temporary Msg box,
and save the message for
select “yes”.
Select Temporary box.
the later use, press End Key.
6.4.4 Sent Message Box
All the sent messages get stored in here.
Select Sent Msg box.
You can see the messages
you sent.
Unidata Communication Systems Inc.
Page １７
You can see the
message you saved.
WirelessIP3000 User Guide
Application
6.4.5 Delete All
To delete all, use the option menu at each Msg. box,
then select Delete all to clear all the messages.
This shows the deleting process.
Unidata Communication Systems Inc.
Page １８
WirelessIP3000 User Guide
Application
6.5 Call Log Menu
This menu keeps the history of Inbound and Outbound calls.
Select Call logs to
enter.
Note : You can also enter Call logs menu by using
Multi Function Key left or right at idle mode.
Enter 1.Received calls.
Then you can see the history of received calls.
For further information to see, press enter.
It contains date/time, name/number, and status.
Enter 2. Dialed calls.
Just like the Received calls it displays numbers that
user has called.
For further information to see, press enter.
It contains date/time, name/number, and status.
Note : If you want to delete whole call histories
enter 3.delete all and select yes.
Note.
Missed Call
Dialed Call
Received Call
Unidata Communication Systems Inc.
Page １９
WirelessIP3000 User Guide
Application
6.5.1 Appendix (Option, Dial Mode)
Use Left Soft Key to enter Sub Menu at Received Call logs window.
You can delete the each received call number.
You can store the number that it is in Received
Call Logs.
You can send a SMS message directly to the
You can add the number that is in received call
number that is in received call list.
list as friend.
6.5.2 Show More Information and Call from Call Log
Press Enter Key on the number that you want
From the Call logs screen, press Send Key
to get more information then information
on the number that you want to call again
window will show up like the picture on the
then phone will automatically dial the
right.
number.
Information contains: date/time, name/number
and duration how long you were on the phone.
Unidata Communication Systems Inc.
Page ２０
WirelessIP3000 User Guide
Application
6.6 Presence Menu
Note : You can also reach “Presence” menu directly by
using Right Soft Key from idle screen.
u User List
It shows list of all friends and you can see the
To add a user to the list, press Left Soft Key and
their status.
select “Add”. Enter the user’s phone number and
press enter to save.
u Block list
It shows list of all blocked friends.
To add a block list, press Left Soft Key and select
“Add”. Enter the user’s phone number and press
enter to save.
Unidata Communication Systems Inc.
Page ２１
WirelessIP3000 User Guide
Application
u Status
To see the current status, enter “Status” menu.
User can set the status by using ◁▷ key and then press
Enter Key to apply.
Note : For description of status message, Refer to page 9.
u Setup
To setup the Online Bell
You can change configuration by using multifunction key.
indication enter “Setup”
It contains Online bell, Ring Type, Mode.
menu.
Unidata Communication Systems Inc.
Page ２２
WirelessIP3000 User Guide
Application
6.7 Setup Menu
Enter “Setup” menu to setup your
phone’s configurations.
6.7.1 Bell / Vib.
Select “Bell / Vib.” and press Enter Key.
u External
There are two modes for
You can setup Ring Type, Mode, and
each Ring Type.
LED type in here.
Note : There are total 16 types of Ring.
Unidata Communication Systems Inc.
Page ２３
WirelessIP3000 User Guide
Application
u Internal
There are two modes for
You can setup Ring Type, Mode, and
each Ring Type.
LED type in here.
Note : There are total 16 types of Ring.
6.7.2 Phone lock
You can set User password and
Lock mode in here.
u User Pwd
Enter old password.
Enter new password.
Default password is “0000”.
Unidata Communication Systems Inc.
Page ２４
Input new password
If you see this dialog, then
again.
It’s done.
WirelessIP3000 User Guide
Application
u Lock Pwd
You can choose Lock
If you set to “Password”, you
If you set to “No password” you
mode in here.
have to input password every
can lock your phone without
time you lock your phone.
inputting password.
6.7.3 Alarm
You can set alarm clock up to 3
After setting each field to what you like, leave it
to “On” and use Enter Key to save & exit.
Unidata Communication Systems Inc.
Page ２５
WirelessIP3000 User Guide
Application
6.7.4 Volume
Use ◁▷ key to control volume and press
You can set the volumes here.
Enter Key to apply.
6.7.5 Error notify
In this menu you can turn on or off the Error Msg, which briefly explains the error to user within pop up
dialog, and you can set service lamp configuration.
6.7.5.1 Service lamp
Enabling the Service LED let user to select two
LED: LED blinking every interval value tells the
types of mode between “LED” and “LED + beep”.
phone is in WLAN service area.
LED + beep: If WLAN status is out of service area,
Phone makes beep sound.
6.7.5.2 Error Msg.
Use ◁▷ key to turn On or Off Error Msg. and
press Enter Key to apply.
Unidata Communication Systems Inc.
Page ２６
WirelessIP3000 User Guide
Application
6.7.6 Information
This menu is where you can see information
about phone’s SIP, Network, MAC address,
WEB server Bootrom / software version.
u TCP/IP
It shows information of DHCP mode, IP
address, Netmask, Gateway, and DNS.
u W-LAN
It shows W-LAN information: Current Network,
SSID, Signal strength, AP’s channel, WEP status,
AP’s MAC address, mode, and Beacon interval.
Unidata Communication Systems Inc.
Page ２７
WirelessIP3000 User Guide
Application
u SIP
It shows SIP server Information:
SIP URL, User ID, Proxy server,
Registrar and Outbound proxy
u MAC address
It shows your phone’s MAC address.
u WEB server
It shows WEB server status and it’s
address.
u Version
It shows current software version.
Unidata Communication Systems Inc.
Page ２８
WirelessIP3000 User Guide
Application
6.7.7 Advanced
Advanced menu contains Time,
Contrast, Language, Caller ID and
User data reset.
6.7.7.1 Time
You can control all the time settings, formats and additional functions in here.
u Time (Time server)
Use ◁▷ key to change the
Enabled: WirelessIP3000 gets the date and time from the NTP
NTP Enabled/Disabled and
server.
press Enter Key to apply.
Disabled: WirelessIP3000 displays the date and time, which
has set in “Current time”.
u Time (Time zone)
Enter “Time zone”.
You have to select proper
Press Enter Key to apply and
time zone in here.
exit.
Unidata Communication Systems Inc.
Page ２９
WirelessIP3000 User Guide
Application
u Time (Daylight save)
Enter “Daylight save”.
Use Left soft Key to edit settings.
u Time (Time format)
Enter “Time format”.
Use Left Soft Key to edit settings.
You can change the time format to
what you want.
u Time (Current time)
Enter “Current time”.
It shows current date and time.
You can edit time in here.
Unidata Communication Systems Inc.
Page ３０
WirelessIP3000 User Guide
Application
6.7.7.2 Contrast
Enter “Contrast” and set your
phone’s contrast using ◁▷ key.
6.7.7.3 Language
Enter “Language” and choose your
language between English and
Japanese using ◁▷ key.
6.7.7.4 Caller ID
Enter “Caller ID” and set your caller
ID mode using ◁▷ key.
6.7.7.5 User data reset
Enter “User data reset”.
Choosing “Yes” brings you the
phone’s beginning.
Unidata Communication Systems Inc.
Page ３１
WirelessIP3000 User Guide
Application
6.8 Network
Network menu contains Site scan, Ping
test and Network reload.
Other network configuration is for Admin
menu.
6.8.1 Site scan
Enter “Site scan”.
It shows the process of
After searching is done, it will
searching.
list the AP’s ssids nearby.
If you want to see more
information about that ssid,
Note : Stronger WIFI strength goes up to top.
move to it and press Enter
Key.
6.8.2 Ping test
u Manual
Enter “Manual” for
Enter the IP address you want
manual ping test.
to ping when IP input box
shows up.
Press Enter Key to start Pingtest.
Unidata Communication Systems Inc.
Page ３２
Phone starts pinging.
WirelessIP3000 User Guide
Application
u Proxy
Phone will ping automatically at first
proxy server that has set.
u Gateway
Phone will ping automatically at
gateway that has set.
Note : If you did not set gateway then ping
test won’t work.
u TFTP serverS
Phone will ping automatically at
TFTP server that has set.
Unidata Communication Systems Inc.
Page ３３
WirelessIP3000 User Guide
Application
6.8.3 Network reload
u Restarting network
Restarting network.
Use ◁▷ Key to select
If it’s done, the phone
“Yes”.
network may get restarted.
u Deactivating network
Deactivating network.
Use ◁▷ Key to select
If it’s done, the phone
“Yes”.
network will be
disconnected.
Unidata Communication Systems Inc.
Page ３４
WirelessIP3000 User Guide
Web Configuration Tool
7 Web Configuration Tool
This chapter explains how to access WirelessIP3000’s web server and configure the settings.
7.1 About Web Configuration Tool
Web Configuration Tool contributes the convenience by allowing you to configure basic functions, which you
could do it with the device directly, or view current information of settings on WirelessIP3000 through web
browser.
7.2 Login Process
1.
Make sure your WirelessIP3000 is connected to the Wireless LAN before accessing its web server.
2.
Launch a web browser.
3.
Enter the IP address on the address field from web browser with port number “8080” followed by
colon. (Ex. http://:8080). To find out the IP address of your WirelessIP3000, go to
menu Setup > Information > TCP/IP.
Figure 2. Phone IP address
4.
When Login screen pops up, enter your user name and password then click OK. (Default User
Name: “user” and Password: “0000”)
Figure 3. Login Screen
Note:
It is strongly advised to change the ID and password when first time you login. Please do not forget
your new ID and password.
Unidata Communication Systems Inc.
Page ３５
WirelessIP3000 User Guide
Web Configuration Tool
7.3 Using the Web Configuration Tool
The figure below gets displayed after the login process.
Figure 4. Web Configuration Tool Main Screen
Table 1. Link Description
Links
Description
Main Page
This takes you to the first page when you get logged in.
Phonebook
This option operates same as the menu in WirelessIP3000 device.
You can search, add, or edit the phone number.
[1.1 Phonebook] for the details.
Change Password
This option let you change ID and Password.
Unidata Communication Systems Inc.
Page ３６
Please refer to
WirelessIP3000 User Guide
FAQ
8. FAQ
Q.
Does WirelessIP3000 support Layer 2 roaming while on the phone?
A.
Yes, WirelessIP3000 can roam between access points with same ssid while user is on the phone.
Q.
Does WirelessIP3000 support Layer 3 roaming while on the phone?
A.
Yes, WirelessIP3000 can roam to different network while user is on the phone but another different
network configuration must be set before in the Admin > Network > Config menu.
Q.
Which codecs does the WirelessIP3000 support?
A. WirelessIP3000 supports G.711 and G.729 codecs.
Q. Where can I purchase a new battery?
A.
Please contact WirelessIP3000 manufacturer.
Q.
Why antenna signal is unstable and voice sound is not clear?
A.
This could happen if user is far away from access point or user is at basement, tunnel,
mountains, place surrounded. These factors could effect antenna signal.
Q. Does WirelessIP3000 supports out-of-band DTMF?
A.
Yes. You can set up SIP INFO method by setting DTMF type entry to 1, and also you can set up
RFC 2833 by setting DTMF type entry to 2.
Unidata Communication Systems Inc.
Page ３７
WirelessIP3000 User Guide
Glossary
9. Glossary
802.1x
As the IEEE standard for access control for wireless and wired LANs, 802.1x provides a means of
authenticating and authorizing devices to attach to a LAN port. This standard defines the Extensible
Authentication Protocol (EAP), which uses a central authentication server to authenticate each user on
the network.
AP (Access Point)
A transceiver that makes a connection between wired network and one or more wireless devices.
DHCP (Dynamic Host Configuration Protocol)
Automatically gets an IP address assigned to a device when it logs onto the network.
SIP
SIP is the real-time communication protocol for Voice over IP (VoIP), and it supports multimedia
communications. SIP performs basic call-control tasks, such as session set up and tear down and
signaling for features such as hold, caller ID and call transferring. With SIP, most of the intelligence for
call setup and features resides on the SIP device or user agent, such as an IP phone or a PC with voice
or instant-messaging software.
MD5 (Message Digest 5)
A secure hashing function that converts an arbitrarily long data stream into a digest of fixed size (128 bit).
NAT (Network Address Translation)
Sharing one incoming IP address by creating new multiple IP address to each devices.Roaming
Movement from one AP coverage area to another with a wireless device without disconnection.SSID
It’s an identifier when wireless device tries to connect to the WLAN through AP.
It’s like a name that
differentiate WLAN environments. Therefore both AP and wireless device must have the same SSID in
order to connect to a certain WLAN.
TCP/IP
A protocol that makes smooth communication between LANs and WANs through computers. TCP/IP is
made up with TCP plus IP protocol.
between server and client.
TCP (Transmission Control Protocol) guarantees data transmission
IP (Internet Protocol) is the computer address.
Unidata Communication Systems Inc.
Page ３８
WirelessIP3000 User Guide
Glossary
TFTP
A protocol, which allows files to be transferred from a host to a client.
TLS (Transport Layer Security)
An IETF standardized protocol that provides data integrity and privacy between two communications. It
allows client-server applications to communicate and is designed to prevent eavesdropping.
UAM (Universal Access Method)
It is a login process using HTTP or HTTPS protocol (http over SSL, which tunnels the http packet to ssl
channel) through web browser for user ID and password input from html page, so that users can access
the service.
uPnP (Universal Plug and Play)
uPnP is an architecture for peer-to-peer network connectivity of PCs and intelligent devices or appliances,
particularly within the home. uPnP builds on Internet standards and technologies, such as TCP/IP, HTTP,
and XML, to enable these devices to automatically connect with one another and work together to make
networking particularly home networking possible for more people.
USB (Universal Serial Bus)
It is a connection between a PC and a peripheral that transmit data.
USB 1.1
12Mbps and new USB 2.0 is 40 times faster, which makes 480Mbps data rate.
provides data rate of
It supports Plug & Play
and supply power.
VoIP (Voice over IP)
A term used in IP Telephony for a set of facilities for managing the delivery of voice information
using the Internet Protocol(IP), which means sending voice information in digital packets.
WEP (Wired Equivalent Privacy)
Data encryption method used to protect the transmission between 802.11 wireless clients and APs.
However, it used the same key among all communicating devices. WEP's problems are wellknown, including an insufficient key length and no automated method for distributing the keys.
Unidata Communication Systems Inc.
Page ３９
WirelessIP3000 User Guide
Contatct Us
10. Menu Construction
This chapter shows the whole menu construction of WirelessIP3000.
Phone Book
Search
By Kana
By Name
By Number
By Group
By Index
New Number
Edit Group
Delete All
Message
Recv. Msg Box
Write Msg
Temporary Box
Sent Msg Box
Setup
Call Logs
Received Calls
Dialed Calls
Delete All
Presence
User List
Block List
Status
Setup
Setup
Bell/Vib.
External 1
External 2
Internal 1
Internal 2
Phone Lock
User Pwd
Lock Mode
Alarm
Alarm Clock 1
Alarm Clock 2
Alarm Clock 3
Volume
Error Notify
Service Lamp
Error Msg.
Information
TCP/IP
W-LAN
Unidata Communication Systems Inc.
Page 40
WirelessIP3000 User Guide
Contatct Us
SIP
MAC Address
WEB Server
Version
Advanced
Time
Time Server
Time Zone
Daylight Save
Time Format
Current Time
Contrast
Font Size
Language
Caller ID
User Data Reset
Network
Site Scan
Ping Test
Manual
st
1 Proxy
nd
2 Proxy
Gateway
TFTP Server
Network Reload
Unidata Communication Systems Inc.
Page 41
WirelessIP3000 User Guide
Contatct Us
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the
device
Unidata Communication Systems Inc.
Page 42
WirelessIP3000 User Guide
Contatct Us
0678
CE application country
country
code
Austria
AT
Belgium
BE
Cyprus
VY
Czech Republic
CZ
Denmark
DK
Estonia
EE
Finland
FI
France
FR
Germany
DE
Greece
GR
Hungrary
HU
Ireland
IE
Italy
IT
atvia
LV
Lithuania
LT
Luxembourg
LU
Malta
MT
Netherlands
NL
Poland
PL
Portugal
PT
Slovakia
SK
Slovania
SI
Spain
ES
Swenden
SE
United King-dom
GB
Iceland
IS
Liechtenstein
LI
Norway
NO
Switzerland
CH
Bulgria
BG
Romania
RO
Turkey
TR
Unidata Communication Systems Inc.
Page 43
WirelessIP3000 User Guide
Contatct Us
12. Hardware Specification
1. Package Contents
1) WirelessIP3000 : 1ea
2) Cradle : 1ea
3) AC/DC Adaptor : 1ea
4) Battery
:1ea
5) USB Cable : 1ea
2. Product specification
1) Operating Temperature : 0~45℃
2) Standard : 130.05 (L) x 43 (W) x 17.13 (H)
3)
Weight : 103g
4)
Adaptor
input voltage : AC100~240V, 50~60Hz
Rated Output Voltage : DC 5.0V ± 0.2V
Max. Output Current : 1A
5)
Battery
Battery Type : Li-ion
Battery Capacity : 1,320mAh
Time (Estimate) : Standby time 55 hour
Talk time 4 hour
Charing time 3 hour
Unidata Communication Systems Inc.
Page 44
WirelessIP3000 User Guide
Contatct Us
11. Contact Us
Please have the following information ready when you contact customer support.
Ø
Product model and serial number.
Ø
Date that you purchased WirelessIP3000.
Ø
Software version and Bootrom version.
Ø
Brief description of the problem and the procedure how it has occurred.
Address
Telephone / Fax
Homepage
UniData Communication Systems, Inc.
+82-2-3443-3390
http://www.udcsystems.com
GangNam-Gu NonHyun-Dong 82-15,
+82-2-3443-7103
OhSung-Bldg 2F, 135-010
Seoul, Korea
E-mail
Product
sales@udcsystems.com
Corporate
webmaster@udcsystems.com
Job
human@udcsystems.com
Partnership
sales@udcsystems.com
Unidata Communication Systems Inc.
Page 45

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Microsoft Word - WirelessIP 3000_Userguide_FCC_IC_CE Style_eng_4.doc
Author                          : 신경균
Creator                         : pdfFactory Pro http://www.pdffactory.com
Producer                        : pdfFactory Pro v1.57 (Windows 2000 Korean)
Create Date                     : 2006:01:18 17:07:24
Page Count                      : 49

EXIF Metadata provided by EXIF.tools