Hitachi Managed Services Business Division PCKCA100 USB Finger Vein Biometric Scanner User Manual HITACHI

Download:
Mirror Download [FCC.gov]
Document ID	1519149
Application ID	dUB8fxruQfy/T6Myy0n0EA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.08kB (175981 bits)
Date Submitted	2011-08-08 00:00:00
Date Available	2012-02-04 00:00:00
Creation Date	2011-08-04 09:33:31
Producing Software	Adobe LiveCycle PDFG ES2
Document Lastmod	2011-08-04 09:33:31
Document Title	HITACHI
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Carlos Fernando Monti

Hitachi USB Finger Vein Biometric Scanner PC-KCA100
Hardware Operations Manual
Before using this product, read all guidelines in the manual carefully.
This manual should be kept for future reference.
Important Notices





Quoting or partial / total reprinting of the contents of this document without license is
prohibited.
The contents of this document are subject to change without notice.
In the case of any errors, inaccuracies or omissions in the contents of this document,
please notify Hitachi, Ltd.
Hitachi, Ltd. permits the acquisition and use of the product according to the
conditions indicated in this Hardware Operations Manual.
According to the statements contained in previous paragraphs, Hitachi, Ltd. will not
assume any liability for effects arising from the use of this product. Consequently, do
not use the product unless you fully understand its operation.
Product Reliability


The product you have purchased has been designed and manufactured for general
office use. Avoid its use for applications that require extremely high reliability or in
cases where lives or property may be at stake, for example the control of chemical
plants, medical devices, urgent communications etc. Hitachi, Ltd. assumes no
liability for any such uses and for any derived circumstances that may lead to
accidents if used inappropriately .
We do not guarantee the correct functioning of this product if it is used
simultaneously with other identification devices.
Regulations and Measures
 ICES-003 Statements
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
 Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Properly attached USB cable must be used for connection to host
computers in order to meet FCC emission limits.
Note: This equipment has been tested and found to comply with the limits for a
class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. There is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
 KC
B 급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B 급) 전자파적합기기로서 주로
가정에서 사용하는 것을 목적으로 하며, 모든
지역에서 사용할 수 있습니다.
 Exports Regulations
Before exporting the product, verify legal requirements in each country in addition
to U.S. regulations for export control, and make all necessary arrangements
accordingly. The above applies to attachments and software surrounding the
device as well. Contact Hitachi, Ltd. should you have any concerns.
Disposal
When discarding this product, follow all regional and local laws.
Also consult regulations regarding the material of each component.
Notes
Attention: If the device is not properly handled, device failure may occur.
Important: If the device is not properly handled, certain functions may not respond
properly.
Safety Guidance

Do not use this product near wet places such as humidifiers, washing machines,
cooking places, washbasins, baths and the like. This may cause damage to the
product.

Do not use damaged or badly bent USB cables. If the cable is damaged, this may
cause interruptions or malfunction.

Do not dismantle or modify this device. It may lead to damage and malfunction.
1. Introduction
Hitachi gratefully acknowledges your implementation of the Hitachi USB Finger Vein
Biometric Scanner (hereafter referred to as “FV Scanner”). The objective of this
operations manual is to provide a basic understanding of how to handle and use the FV
Scanner. Information on the installation and un-installation of the device driver and the
necessary software are provided in the “Device Driver and Hitachi Secure BioAPI
Runtime Libraries Installation and Un-installation Manual”.
1.1 Product Characteristics
FV Scanner is a biometric authentication device that performs individual authentication
by capturing finger vein patterns.
1.2 Package Contents Verification
The package consists of the items listed below. In case the package does not contain
any of these items, please contact the retailer.
FV Scanner………………………………………….…………........1 unit
USB Cable (1.8m) .....................................................................1 unit
2. Installation of the FV Scanner
2.1 FV Scanner Components and Functions
Image from Top and Side
1. Indicator LED
2. Scanning area (The area capturing the finger vein pattern.)
3. Anti-theft Lock Connection (Connection for the security cable
used for theft prevention.)
Image from Back
4. USB Connector (Mini-B Type) connected to USB Cable (Mini-B plug)
2.2 FV Scanner Installation and Configuration
1. Install the FV Scanner on a horizontal surface in a stable and secure location.
Place the device away from windows, direct light, or other strong light sources.
Usage of the device under 300-1000 Lux, which is equivalent to the light required
to read a newspaper without difficulty, is strongly advised.
Important
Do not use FV Scanner in places receiving solar rays, either direct sun exposure or
strong sunlight coming in through windows. Exposure to strong light may lead to
authentication failure.
2. Connect the USB Connector (Mini-B Type) of the USB cable (Mini-B Type) to
FV Scanner. Connect plug A of the USB cable to the USB port or to the PC Hub.
Mini-B Plug
A Plug
Attention
Insert the USB plug into the USB connector in a safe manner. Hold the plug end when
connecting or disconnecting the USB cable. If the plug end is not held when connecting
or disconnecting, failures may occur.
Important





When connecting the USB via the hub, verify the supply current. Equipment may
malfunction with insufficient power supply.
For a USB 2.0 PC port, do not use a USB 1.1 hub, which may cause the FV scanner
to malfunction.
FV Scanner may hold some heat due to the use of infra-red rays in the product, but
this will not cause failures.
Do not connect more than two devices simultaneously to one PC. If multiple FV
Scanners are connected, they will not work properly.
After connecting the FV Scanner, wait for at least 5 seconds before performing any
operation.
3. When connecting FV Scanner to the PC, a message stating "Hardware Update
Wizard" or "New Hardware Access Wizard" will be displayed. Cancel the wizard
and instead execute the device driver and the necessary software installation from
“Hitachi USB Finger Vein Biometrics Scanner PC-KCA100 Bundle CD”. For
information on software installation, refer to the “Device Driver and Hitachi Secure
BioAPI Runtime Libraries Installation and Un-installation Manual”.
3. How to Use the FV Scanner
Place the finger in the scanning area of the FV Scanner.
Important



Consult the accompanying document "Authentication-Registration Guide" about
proper finger position.
During image capture, do not place any unidentified object other than the finger in
the scanning area of the FV Scanner as this may lead to malfunction.
Finger vein authentication and registration may fail in the following cases registration of children’s fingers, narrow fingers (finger width under 10 mm/0.4”),
wide fingers (finger width over 25 mm/1”) or short fingers (the individual’s finger
cannot reach the finger authentication area).
When placing your index finger onto the scanning area, hold the FV scanner by using
your thumb and middle finger on either side to keep it fixed and steady.
The fingertip must reach the cavity at the back of the scanning area. Rest the
underside of the finger gently on the notch indicated by the red circle in the illustration
below.
Fingertip
Important


Improper positioning of the finger on FV Scanner may lead to authentication failure.
For further information on the proper finger position, refer to the accompanying
document "Authentication-Registration Guide".
Do not disconnect the USB cable or FV Scanner from the PC during image capture
as this may cause system instability.
4. FV Scanner Maintenance
Attention



Before performing FV Scanner maintenance, remove the USB cable. Keeping the
cable connected during maintenance may cause failures.
Take caution so that the product is not exposed to any liquid or humidity. as that may
cause malfunctioning.
Do not clean the device using organic solvents such as gasoline or alcohol.

Periodic maintenance of the external part of FV Scanner is recommended. About
once a month or whenever required according the condition of the scanner, clean the
external part by rubbing it with a soft piece of cloth. If dirt remains, use a mild
detergent and rinse off with a damp cloth. Ensure that the FV scanner is in no way
soaked in liquid.

Scanning area maintenance is recommended about once a month or whenever dirt
from fingerprints is detected.
Use a soft piece of cloth to clean it.
[Scanning Area Maintenance Method]
Raise upwards and remove the front part of the device where the finger is
placed (support).
Clean the scanning area using a soft piece of cloth. In case of big and obvious
dirt particles, remove these before cleaning.
Place the support back into its position once cleaning is done.
5. Hardware Specifications
Name
USB Finger Vein Biometric Scanner
Model
PC-KCA100
Finger Size
More than 10 mm/0.4” and less than 25 mm/1” *1
Interface
USB 2.0
Dimensions
Approx. 59mm/2.3”(W) × 82mm/3.2”(D) × 74mm/2.9”(H)
Weight
Approx. 96g/3.4oz (USB cable not included)
Maximum energy supply
Environment
Conditions
(Operation)
Operating
Temperature
Operating
Humidity
Environment
Conditions
(Storage)
Storage Temperature
PC Requirements
Storage
Humidity
CPU
Memory
HDD
Interface *2
DC 5V 500 mA
(Bus powered)
5 to 35 degrees C
(41 to 95 degrees F)
20 to 80％RH
(However do not allow condensation)
-10 to 60 degrees C
(14 to 140 degrees F)
20 to 80％Rh
(However, do not allow condensation)
See “Device Driver and Hitachi Secure BioAPI Runtime
Libraries Installation and Un-installation Manual”
Compatible OS
*1: In case of incorrect finger positioning, even with correct finger size, authentication
may fail to be completed.
*2: If possible, connect the FV scanner directly to a PC USB port. If connecting via a
USB hub, use a self-powered hub. When the FV Scanner is disconnected from a USB
port, use the same USB port upon reconnection.
6. Troubleshooting
This section presents methods for solving problems with the FV Scanner.
■ The USB cable is connected to FV Scanner, but the LED does not display a
green light.
This may be due to several reasons:
FV Scanner driver being used has not been appropriately configured.
→ See Chap. 2.4 Confirmation of Driver Installation in ”Device Driver and
Hitachi Secure BioAPI Runtime Libraries Installation and Un-installation
Manual” and verify that the driver has been properly configured on the PC.
PC USB port may be malfunctioning.
→ Restart the PC.
The hardware may be damaged.
→ Contact the retailer.
■ Authentication failure.
The finger has been moved during authentication.
→ Place the finger properly in the scanning area during authentication
and do not move it until the authentication process is completed.
The finger is wounded, excessively dry or dirty.
→When the finger is wounded, excessively dry or dirty, e.g. presenting dust or
other traces of dirt on its surface, a proper image will not be obtained during the
authentication process.
→ Wash or clean the hands, then perform authentication again using clean and
healthy fingers.
In the case of a finger width over 25 mm/1” or under 10 mm/0.4”, an appropriate
image might not be obtained and thus the image capture will not be completed.
→Perform a test of finger location: Try to extend the finger; place the finger
deep into the cavity; place the finger closer to the front.
General usage: Perform authentication by placing the fingertip on the
concave part of the FV Scanner.
The finger is not properly positioned.
→Place the finger properly into the scanning area, following the instructions
for authenticating.
Discrepancy between current finger condition and that stored at registration.
→ If it is difficult to complete authentication (i.e. with growing children, whose
finger condition changes), register the finger information again. For this new
registration, delete the previous finger information and perform Add Finger
Information again.
■ Authentication has failed to start.
Authentication will not start.
→When the FV Scanner is connected, the LED light is permanently on.
However, authentication cannot be immediately started. Wait for at least 5
seconds after connecting the device before performing an authentication.
Copyright
© Hitachi, Ltd. 2011. All rights reserved.
All Rights Reserved, Copyright © 2011, Hitachi Solutions, Ltd.
The software and the manual can be used and managed under the responsibility of the
administrator registered in the relevant document of FV Scanner.
Without the express consent of Hitachi, Ltd., the following is prohibited:
1. Reproduction, photocopying or transference of this user's guide contents, either
partially or in its entirety, as well as the transfer of the registration information
contained in the scanner memory.
2. Translation of this user's guide to any computer languages or any other language.
The use of any electronic, mechanical, magnetic, optic or similar procedures for
performing the above actions laid down in points 1 and 2 is also prohibited.
Adobe Reader is a registered trademark of Adobe Systems Incorporated ( Adobe
Systems Ltd.).
These trademarks and products are owned by company trademarks and the registered
trademarks. Reproduction is forbidden without consent.
Hardware Operations Manual
First Edition August 2011
Reproduction is forbidden without consent.
© Hitachi, Ltd. 2011. All rights reserved.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 10
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.395834, 2009/07/20-16:45:24
Producer                        : Adobe LiveCycle PDFG ES2
Creator                         : Carlos Fernando Monti
Title                           : HITACHI
Modify Date                     : 2011:08:04 09:33:31+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Create Date                     : 2011:08:04 09:33:31+09:00
Subject                         : 
Author                          : Carlos Fernando Monti

EXIF Metadata provided by EXIF.tools