Hitachi Hdc 761E Instruction Manual 761EGB
HDC-761E - Instruction Manual HDC-761E_EN Free User Guide for Hitachi Camera, Manual
2015-08-19
: Hitachi Hitachi-Hdc-761E-Instruction-Manual-786629 hitachi-hdc-761e-instruction-manual-786629 hitachi pdf
Open the PDF directly: View PDF
Page Count: 53
- (1) This device may not cause harmful interference, and
- (2) This device must accept any interference received, including interference that may cause undesired operation.
- INTRODUCTION
- GETTING TO KNOW YOUR CAMERA
- Front View
- Rear View
- Mode Dial
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 2. Compose your subject within the focus frame. When you press the shutter release button down half way, the camera’s Auto Focus feature automatically focuses the image. Proper exposure is determined and locked at the same time.
- 3. Press the shutter release button all the way down to capture the image.
- LCD Monitor Information
- 2. Flash mode
- 3. Capture mode
- 4. Focus mode
- 5. Possible number of shots
- 6. Memory status
- 7. Battery
- 8. Recorded pixels
- 9. Image quality
- 10. White balance
- 11. ISO sensitivity
- 12. EV compensation
- 13. Focus area
- 14. Zoom bar
- 2. Flash mode
- 3. Recordable movie time available
- 4. Memory status
- 5. Battery power indicator
- 6. Focus area
- 7. Zoom bar
- 2. Number of image
- 3. Memory status
- 4. Battery power indicator
- 5. Index number of total number
- 6. DPOF indicator
- 7. Protect indicator
- 8. Date
- 9. Time
- 10. Aperture
- 11. Shutter speed
- 12. EV compensation
- 13. ISO sensitivity
- 14. White balance
- 15. Image quality
- 16. Recorded pixels
- 2. Movie mode
- 3. Number of movie
- 4. Memory status
- 5. Battery power indicator
- 6. Index number of total number
- 7. Elapsed time
- 8. Date
- 9. Time
- 10. Play/Pause indicator
- PREPARING THE CAMERA
- GETTING STARTED
- PHOTOGRAPHY MODE
- Shooting Images
- Setting Image Resolution and Quality
- Using the Zoom Function
- Using the Flash
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (t/). The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (pq).
- 4. Press the button to confirm the setting.
- 5. Compose your scene and press the shutter release button.
- Setting Focus
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (u/). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (pq).
- 4. Press the button to confirm the setting.
- 5. Compose your scene and press the shutter release button.
- CAPTURE MODE
- Burst
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (p/) and use (p) to select [Burst]. You can also change the setting using four-way controller (tu).
- 4. Press the button to confirm the setting. The indicator is displayed on the monitor screen.
- 5. Press the shutter release button halfway to lock the focus.
- 6. Press the shutter release button to capture a sequence of images.
- Auto Bracket
- 2. Press the power switch to turn on the power.
- 3. Press the four-way controller (p/) and use (p) to select [AEB]. You can also change the setting using the four-way controller (tu).
- 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor screen.
- 5. Press the shutter release button to capture the three images.
- Self-Timer
- 2. Rotate the mode dial to , , , , , or .
- 3. Press the power switch to turn on the power.
- 4. Press the four-way controller (p/) and use (p) to select your desired self-timer mode. You can also change the setting using four-way controller (tu).
- 5. Press the button to confirm the setting.
- 6. Compose your scene and press the shutter release button.
- Adjusting the Exposure (EV Compensation)
- Setting White Balance
- 2. Press the power switch to turn on the power.
- 3. Press the MENU button. [Mode1] is displayed.
- 4. Use the four-way controller (q) to select [W. Balance], then press the button.
- 5. Use the four-way controller (pq) to select the desired white balance setting, then press the button to confirm.
- 6. To cancel the setting, press the MENU button and exit the menu.
- Burst
- PLAYBACK MODE - THE BASICS
- Viewing Images
- Magnifying Images
- Thumbnail Display
- Slideshow Display
- Resizing an Image
- 2. In the mode, use the four-way controller (tu) to select the desired images.
- 3. Press the MENU button to access the Playback menu. Press the four-way controller (u) to select [Playback2] and press (q) to select [Resize] and press the button.
- 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
- MOVIE MODE
- PLAYBACK MODE - ADVANCED FEATURES
- Playing Back Still Images/Movie Clips on TV
- Deleting Images/Movie Clips
- 2. Press the button.
- 3. Use the four-way controller (tu) to select the image/movie clip you want to delete.
- 4. Press the button to delete.
- 5. Use the four-way controller (pq) to select [This Image] or [All Images], then press the button.
- 6. When the delete message appears, use the four-way controller (pq) to select [Yes], then press the button to confirm the deletion.
- Protecting Images/Movie Clips
- 2. In the mode, use the four-way controller (tu) to select the desired images.
- 3. Press the MENU button, then use the four-way controller(q) to select [Protect] and press the button.
- 4. Use the four-way controller (pq) to choose the desired setting, then press the button.
- 5. Use the four-way controller (pq) to select [Lock], then press the button to confirm.
- Setting the DPOF
- 2. Press the MENU button. Use the four-way controller (pq) to select [DPOF], then press the button.
- 3. Use the four-way controller (pq) to select by your preference, then press the button.
- 4. Use the four-way controller (pq) to select by your preference, then press the button.
- 5. Press the MENU button to return to the image playback mode.
- TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER
- 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
- 3. Press the button.
- 4. Use the four-way controller (q) to select [PC], then press the button.
- 5. Turn off your camera.
- 6. Connect your camera and the computer via the supplied USB cable.
- 7. Turn your camera on by pressing the power switch.
- 8. From the Windows desktop, double click on “My Computer”.
- 9. Look for a new “removable disk” icon.
- 10. Double click on the removable disk and locate the DCIM folder.
- 11. Double click on the DCIM folder to open it to find more folders.
- 12. Copy & Paste or Drag-N-Drop image and video files to a folder on your computer.
- EDITING SOFTWARE INSTALLATION
- USING THE DIGITAL CAMERA AS A PC CAMERA
- Step 1: Install the PC camera driver
- Step 2: Connect the digital camera to your computer
- 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
- 3. Press the button.
- 4. Use the four-way controller (pq) to select [PC Camera], then press the button.
- 5. Connect your camera and the computer via the supplied USB cable.
- 6. Position the digital camera steadily on top of your computer monitor or use a tripod.
- Step 3: Run your application software (i.e. Windows NetMeeting)
- 2. Click the Start Video button to view live video.
- 3. Click the Place Call button.
- 4. Type the e-mail address or the network address of the computer that you are calling.
- 5. Click Call. The person that you are calling must also have Windows NetMeeting running and be willing to accept your call to start the videoconference.
- MENU OPTIONS
- Camera Menu
- Movie Menu
- Playback Menu
- 2. Press the MENU button, then use the four-way controller (pq) to select the [Playback1] / [Playback2] menu.
- 3. Use the four-way controller (pq) to select the option item, then press the button.
- 4. Press the four-way controller (pq) to select the desired setting, then press the button.
- 5. To exit the playback menu, press the MENU button.
- Setup Menu
- SPECIFICATIONS
- TROUBLESHOOTING GUIDE
- POSSIBLE NUMBER OF RECORDABLE IMAGES
- CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER (OPTIONAL)