Hiteker Dvd Player Sdv 150 Users Manual 150×¿È»ËµÃ÷Êé

2015-02-09

: Hiteker Hiteker-Hiteker-Dvd-Player-Sdv-150-Users-Manual-565280 hiteker-hiteker-dvd-player-sdv-150-users-manual-565280 hiteker pdf

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

SDV-150

User Manual

SDV-150
OPEN/CLOSE

POWER

STOP

PLAY

Please read this User Manual carefully to ensure proper use of this product and
keep this manual for further reference.

Content
Introduction
Safety Precautions

Important Safety Instructions

Caution

Features

Front Panel and Rear Panel Illustration

Remote Control

Connections
Connecting to a TV set

Connecting to an AV Receiver with 2 Channel Analog Audio Input

Connecting to an AV Receiver with Digital Audio Input

Basic Playback
12

Basic Operation

Advanced Features
Modes and Features Setup

Remote Control Operation

MP3 Playback

KODAK Picture CD playback

Others
Troubleshooting

Specifications

-1-

Safety Precautions

Introduction

Specifications

Other

Power requirements: 230V, 50Hz

CAUTION:

CAUTION

THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ
THIS MANUAL CAREFULLY AND KEEP IT FOR
FUTURE REFERENCE.

RISK OF ELECTRIC SHOCK
DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN
E Q U I L AT E R A L T R I A N G L E I S
INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
MANUAL ACCOMPANYING THE UNIT.

IF THE UNIT REQUIRES SERVICING, CONTACT
THE SELLER OR SEE "TROUBLESHOOTING".

TO PREVENT DIRECT EXPOSURE TO THE
LASER RADIATION, DO NOT OPEN THE
CABINET. VISIBLE LASER MAY RADIATE
WHEN THE CABINET IS OPENED OR THE
INTERLOCKS ARE DEFEATED. DO NOT
STARE INTO THE LASER BEAMS.

CAUTION:
THE DVD VIDEO PLAYER IS A CLASS 1 LASER
PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD
VIDEO PLAYER IS HARMFUL TO THE EYES, DO
NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.

WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
NEVER ATTEMPT TO OPEN THE CABINET,
DANGEROUS HIGH VOLTAGES ARE PRESENTED
IN THE UNIT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Power consumption: 25W
Video standard: NTSC/PAL/AUTO
Unit Weight: 5.0 Lbs (2.28kg)
Video out
Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin Jack x 1
S-video output connector(separate Y C signal output connector):
Y output: 1.0V(p-p)/ 75 , sync, negative polarity
C output: 0.286 V(p-p)/75
Audio out
2.1channel out: 1.85V(rms)/10k , RCA pin Jack(L,R) x 1
5.1channel out: RCA pin Jackx6
Coaxial out/Optical: 0.5V(p-p)/75 , RCA pin Jack x 1
Frequency response: 20Hz to 20kHz
S/N ratio: >90dB
Total harmonic distortion: < 0.05%
[Accessories]
Video/Audio cable1
Remote Control1
User s Manual1
1.5V AAA batteries2
Specifications are subject to change without notice.
Weight and dimensions are approximate.

WARNING:
FCC REGULATIONS STATE THAT ANY CHANGE
OR MODIFICATION TO THE EQUIPMENT, NOT
EXPRESSLY APPROVED BY MAKER OR ITS
AUTHORIZED PARTIES, COULD VOID USER'S
AUTHORITY TO OPERATE THIS EQUIPMENT.

CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE- BLADE PLUG WITH WIDE SLOT AND
FULLY INSERT.
THE APPARATUS SHALL NOT BE EXPOSED
TO WATER AND NO OBJECTS FILLED WITH
LIQUID SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.

-2-

This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation,
and is intended for home and other limitedviewing uses only
unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

-31-

Remote Control Operation

Other

Using the remote control

Insert batteries
1. Open the cover.

Important Safety Instructions

10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.

1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be
retained for future reference.

Point the remote control at the remote sensor.
(The pictures below are for reference only.)

Introduction

3. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.

SDV-150
OPEN/CLOSE

POWER

STOP

PLAY

11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your product dealer or local power company.
For products intended to operate from battery power
or other sources, refer to the operating instructions.

4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

2. Insert batteries.

SETUP

STANDBY

L/R

3. Close the cover.

ANGLE

10+

TIME

DISPLAY

ZOOM

MODE

RETURN

STEP

PAUSE

STOP

TITLE
VOL+

MENU
VOL-

MUTE

PROG

SDV-150

Remarks: Do not expose the remote sensor of the

Notes:

Improper use of batteries may cause battery
leakage and corrosion. To operate the remote
control correctly,follow the instructions below:
Do not insert the batteries in the wrong direction.
Do not charge, heat, open, or short-circuit
the batteries.
Do not throw batteries into a fire.
Do not leave dead batteries in the Remote
Control.
Do not use different types of batteries together, or mix old and new batteries.
If you do not use the remote control for a
long period of time, remove the batteries
to avoid possible damage from battery
corrosion.
If the remote control does not function correctly or the operating range becomes reduced, replace all batteries with new ones.
If battery leakage occurs, clean the battery
compartment, then insert new ones.

-30-

7. Water and Moisture
Do not use this product near water for example, near
a bathtub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.

SLOW

ENTER/PLAY

A-B

REPEAT

6. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.

with the marks inside the battery compartment.

N/P

SUBTITLE LANGUAGE

Make sure to match the "+" and "-" of the batteries

12. Grounding or Polarization
This product may be equipped with a polarized
alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

30 o

DVD Player to a strong light source, such as direct
sunlight.

Notes:

Point the remote control directly at the
player's remote sensor.
Do not leave the remote control in an
extremely hot or humid place.
Do not spill water or put anything wet
on the remote control.
Battery life is ~1 year under normal
conditions.

13. Power Cord Protection
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point
where they exit from the product.

8. Accessories
Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product
should follow the manufacturer's instructions, and
should use a mounting accessory recommended by
the manufacturer.

14. Protective Attachment Plug
The product is equipped with an attachment plug
having overload protection. This is a safety feature.
See Instruction Manual for replacement or resetting of
protective device. If replacement of the plug is required,
be sure the service technician has used a replacement
plug specified by the manufacturer that has the same
overload protection as the original plug.

9. Portable Cart Warning
A product and cart combination should be moved with
care. Quick stop, excessive force, and uneven
surface may cause the product and cart combination
to overturn.

(Symbol provided by RETAC)

-3-

Important Safety Instructions

Introduction

15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of
the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antennadischarge
unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure
below.

20. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
21. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A)When the power-supply cord or plug is damaged,
B)If liquid has been spilled, or objects have fallen
into the product,
C)If the product has been exposed to rain or water,
D)If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation,
E)If the product has been dropped or damaged in
any way.
F)When the product exhibits a distinct change in
performance this indicates a need for service.
22. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.

16. Lightning
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and
power lines surges.

23. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.

17. Power Lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
.
18. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles, as this can result in a
risk of fire or electric shock.

24. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only
as recommended by the manufacturer.

Troubleshooting

Advanced Features

If you have any questions, please consult the troubleshooting guide below.

NO PICTURE OR SOUND

"BAD DISC" DISPLAYED

Ensure the power button is on.

Ensure the disc is not warped, damaged or deformed.

Ensure the power outlet is operational.

Ensure the disc is not badly stained or damaged.

Ensure the power cord is not damaged.

Ensure the disc format is compatible with the player.

Ensure the power plug is connected firmly to the

Please check whether you have tried to play a software CD.

outlet.

If so, please restart the player.

REMOTE NOT WORKING

PICTURE BUT NO SOUND

Ensure the audio jacks are securely connected.

Ensure the remote batteries are working.

Ensure the audio connector is not damaged.

Point the remote control directly at the player's IR

Ensure the volume is turned up in VOL/CH setup.
Ensure you have set the player's AUDIO settings correctly.
Ensure you have ENTERed the correct AV input for your TV.
Ensure the audio is not set to mute.

sensor.
Remove any obstacles between the remote and
the IR sensor.

UNIT NOT WORKING

SOUND BUT NO PICTURE

Ensure the video jacks are securely connected.

Turn off the power, and then turn it on again.

Ensure you have ENTERed the correct AV input for your TV.
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO settings correctly.
"NO DISC" DISPLAYED

25. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

Ensure you have put the disc on the tray.
Ensure the disc is not upside down.

POOR PICTURE OR SOUND

Ensure you have set the player's AUDIO settings correctly.

scratched.

Ensure the disc is not scratched or stained.
Ensure the AV connector or the output terminal is not

19. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.

damaged.

-4-

Ensure the disc is not distorted, stained or

-29-

Kodak Picture CD Playback

Advanced Features

The introduction of KODAK Picture CD
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking
the box on the photo finishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS)
color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign. When your
order is returned, you receive your prints, negatives, and your full roll of pictures safely stored on your KODAK
Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on your
computer. You also can record the JPEG picture into CD-R or CD-RW with the CD-Rewriter yourself.

Caution

Introduction

Please use the original box and packing materials for safe
transportation of this product.

Note: 1. The Max. Size of JPEG Picture can be supported: 3840X3840 pels
2. JPEG stands for Joint Picture Experts Group. It is the first International Standard on Still Picture
Compressing: ISO 10918-1, constituted by the Committee on Still Picture Compressing Standard of ISO.
The pictures on KODAK Picture CD are stored in this format (JPEG). This player can decode the JPEG
pictures in KODAK Picture CD and playback the pictures in different modes.
Now, you can playback Kodak Picture CDs on this player and view your wonderful pictures on your TV in the
comfort of your living room.
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak
Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.

It is normal for the cover and rear panel to become warm after the

General function:
You can set slideshow transition modes for any pictures.
Press PAUSE to stop playing.
Press
or
to see the previous or next picture.
Press PLAY to continue slideshow transitions.
Press STOP to return to root menu.

player has been operating for an extended period of time.

Image Rotation
There are three modes to rotate a picture: original, 90 Deg, and 180 Deg. These operations are
allowed only when a picture is being displayed normally and will be cancelled automatically
when a new picture is displayed. The ANGLE keys are used to select the different rotation modes:
Press ANGLE

OSD display

Press ANGLE again

OSD display

90 Deg.

Press ANGLE again

OSD display

180 Deg.

Do not move this product during playback. Doing so may cause damage to
the pickup and the disc.

original.

Zoom Function:
This player provides both Zoom in/out and Zoom pan function. Press the ZOOM
consecutively, the picture will zoom in/out in turn as followings:

Press OPEN/CLOSE on the front panel or remote to open or close the disc
tray. Do not push or touch the tray while it is opening or closing.

Note: During the ZOOM function, slide show transitions and image rotation are disabled.
Q off: close zoom, press PLAY again to resume slide show transition mode.

Digest function
Press the MENU to enable the function. The television screen can
display up to 12 pictures at a pro ratio.
Press Direction key to select any picture displayed on the screen, then press PLAY,
the selected picture will zoom in and start slideshow transition.
Note: the quality of the picture displaying on your screen is mostly subjected to your
display equipment.

-28-

-5-

Features

Introduction

MP3 Playback

Advanced Features

Full compatibility with DVD, CD, MP3, Kodak Picture CD, CD-R and CD-RW (finalized)

Supported formats
Disc format: ISO 9660, Joliet
Music file format: MP3
MP3 bit rate (data rate): 32 -192 kbps
Total number of music files and albums: around 350 per disc.
Sampling rate: (CBR)32kHz/44. 1kHz/48kHz/64kHz; (VBR) 16kHz/22kHz/24kHz/32kHz (MPEG )
Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported,
badly scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalized, or a dirty pickup.
When a MP3 disc is loaded, the screen will display as follows:

Screensaver
Multiple playback modes: Program, Search, 10-Second Review
Dynamic spectrum display
Coaxial digital audio output
S-video, composite video and component (Y, Pb, Pr) video outputs

Disc formats supported by this player:
Total tracks

Dolby Digital

Multi-angle

MP3

0:00:01

056/140
CDA

Elapsed time of
the current track
Current track

Directory

KODAK picture CDs

MP3 files on CD-R/CD-RW

R RESTRICTED

Closed Caption

Subtitle choices

DVD video

Audio choices

Parental Lock

16:9 LB

TV Aspect Ratio modes

This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation , and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation .
Reverse engineering or disassembly is prohibited.

A01

A07

A02

A08

A03

A09

A04

A05

A06

File window

File: A01

Press
to select the file when the cursor appears in the file window.
Press Select to play the current file selected by the cursor.
Press
to switch between the directory window and the file window.
Note: During MP3 playback, Forward Scan and Reverse Scan are not available.

The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works. c 1992-1997 Dolby Laboratories, Inc. All rights reserved.

-6-

File name

-27-

Remote Control Operation

Advanced Features

Front Panel and Rear Panel Illustration

Introduction

Front panel

ANGLE

During DVD playback
Press ANGLE to view scenes from different camera angles.
Press ANGLE repeatedly to change from one camera angle to
another.
Note: This function is disc specific.

SDV-150
OPEN/CLOSE

POWER

LANGUAGE

During DVD playback
Press LANGUAGE repeatedly to select from up to 8 audio
languages/formats.
Note: This function is disc specific.

PLAY

STOP

POWER

VFD SCREEN

PLAY

CABIN DOOR

STOP

SENSOR

OPEN/CLOSE

Rear panel

11 12 13 14 15

SUBTITLE

During DVD playback
Press SUBTITLE repeatedly to select from up to 32
subtitle languages.
Note: This function is disc specific (languages will vary).

2
SDV-150
230V~ 50Hz
25W

Audio out

-26-

Audio

Outputs

MAX

Hiteker Europe BV.
The Netherlands

Audio

Audio output jack

S-Video output jack

Component output jack

Digital Signal optical output jack

Digital signal coaxial output jack

SCART output jack

Video output jack

-7-

Remote Control

Introduction

Remote Control Operation

Advanced Features

VOL+ VOL-

STANDBY

L/R

SETUP

N/P

SUBTITLE LANGUAGE

10+

STANDBY

PROGRAM

L/R

NTSC/PAL

SUBTITLE

OPEN/CLOSE

0-9 NUMBER KEY

ANGLE

10+ KEY

LANGUAGE

DISPLAY

TIME

LEFT

ZOOM

DOWN

MODE

RIGHT

FAST RETURN

RETURN

STEP

FAST FORWARD

ENTER/PLAY

SLOW

VOL+

PAUSE

STOP

VOL-

A-B REPEAT

VOLUME +

TITLE

VOLUME -

REPEAT

MUTE

RETURN

STEP

SLOW

ENTER/PLAY

STOP

A-B
TITLE

REPEAT

MUTE

PROG

Press Volume button to increase Volume
Press button to reduce volume till to no volume output.

TIME

ZOOM

MODE

PAUSE

ANGLE

DISPLAY

SETUP

MUTE

Press MUTE to mute the Audio output
Press MUTE again to resume normal audio output

SDV-150

ZOOM

During DVD or Others playback, press ZOOM to magnify the
image as follows:

Q2
Q Off

Note:
1. Please note that reference numbers for the remote are described beginning on page 19 of this
manual.
2. In this manual, "
" " " " " " " will be used to represent different NAVIGATION ARROWS
on the remote respectively.

-8-

-25-

Remote Control Operation

Advanced Features

Connecting to a TV Set

Connections

SLOW

Press slow repeatedly to slow motion playback at
variable speeds.

Video

S-Video

Coaxial

R
Audio 1

Audio 2

Optical

Composite video

WHITE

YELLOW

RED

Component video
(for progressive scan)

STEP

VIDEO IN

Press STEP during playback to pause playback.
VIDEO

Press STEP repeatedly to play frame.
Press play to resume normal playback.

S-VIDEO
VIDEO IN
P

AUDIO IN
R

REPEAT
L

Select to press REPEAT to select Repeat Title, Repeat chapter,
Repeat off During DVD playback.
Press REPEAT to select Repeat Single, Repeat All and Repeat
off ( CD, Others).

Notes:
There are three ways of connecting the player's AV output to the TV set:
1. S-video cable and left/right audio cable [set the (Video Type) to (S-Video)].
2. Composite video cable and left/right audio cable.
3. Component video cable and left/right audio cable [set the (Video Type) to (Y, Pb, Pr)].

-24-

-9-

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 10
Create Date                     : 2004:04:05 12:00:52
Modify Date                     : 2004:04:05 12:00:52
Producer                        : Corel PDF Engine Version 9.397
Author                          : lxf
Creator                         : CorelDRAW Version 9.397
Title                           : SDV-150×¿È»ËµÃ÷Êé

EXIF Metadata provided by EXIF.tools

Hiteker Dvd Player Sdv 150 Users Manual 150×¿È»ËµÃ÷Êé

Navigation menu

Versions of this User Manual:

Views

Navigation