Hitron TECHNOLOGIES CGN31A CGN3 D3 WiFi Gateway User Manual
Hitron TECHNOLOGIES CGN3 D3 WiFi Gateway
User Manual
HITRON my STEP WIRELESS CABLE GATEWAY _ 1 CGN3 ,/ / I »/ I1 0 Connect to the Internet b 0 Set up your wireless network hitron / 1ETHERNEI'CABLE QUICK SI'ARTGUIDE Q h/ (, STEP Connect your cable outlet to me device’s connector. STEP You can use the induded Ememet cable (0 connect a computer (0 STEP You can connect your wireless devices with the correct SSlD 4 one Of the P0"; 5 and Passphrase. If you have not changed them, the default values are indicated on the sticker on the bottom of the E unit. This device doesn't have the function oi wall-hanging. STEP 2.46 Hz 3510 :XXXXXXXXXXXX PassPhrase:XXXXXXXXXXXX 5GHz SSlD :XXXXXXXXXXXX PassPhrase1XXXXXXXXXXXX Your gateway has a configuration interface allowing complete control over the device’s behavior. In a Web browser, enter in the address bar. In the screen that displays, enter WIRELBS as the usemarne and as the password. DEVICE a _ Computer luma‘w ‘mm 213w). anlisn 3 , Wm, mm mm, POWERADAPTDR Cable Green Blinking: The CGN3 is searching for a downstream frequency. On: The CGN3 has successfully located and locked onto a downstream frequency. Blue On: The CGN3 is engaged in channel bonding. Off: There is no downstream activity. @ Green Blinking: The CGN3 is searching for an upstream frequency. DOWNSTREAM On: The CGN3 has successfully located and locked onto an upstream frequency. Blue On: The CGN3 is engaged in channel bonding. Off: There is no upstream activity. UPSTREAM Green Blinking: The CGN3’s cable modem is registering with the service provider’s CMTS. On: The CGN3’s cable modem has successfully registered and is ready for data transfer. STATUS is being transmitted or received. On: The SGHz wireless network is enabled, and no Wilde“ data is being transmitted or received. lSGHZi Bi-color: Wi-Fi Protected Setup (WPS) is in operation. Off: The SGHz wireless network is not enabled. @ Green Blinking: The SGHZ wireless network is enabled, and data and is transmitting or receiving data. On: A USB device is connected to one of the USB ports, “53 and is not transmitting or receiving data. Off: No USB device is connected to either USB port. 6 Green Blinking: A USB device is connected to one of the USB pom, WARNING Risk of electrical shock. Do not expose die device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between O'C - 40'C (32'F ~104'F). To avoid overheating, do NOT place anyobjecton top of the device. Do not restrict the flow of air around the cable modem. The manufacturer assumes no liabilities for damage caused by any improper use of the device. DISCLAIMER The manufacturer assumes no liabilities with respect to me content of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications sibject to change without notioe. CAUTION The table distribution system should be grounded (earthed) in a acconfince with ANSI NFPA 70, the National flectrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. CWVRIGHT a lull Hrrnou TECHNOLOGIES. INC. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment mniplies with Fcc radiation Bposure limits set faith rnr an attenuated envirmnett nns eouiprnern should be installed and operated with nrinirnun detaroe 20cm between the radiator is you' body. IC Statement: CAN [CB-3 (B)INMB-3(B) This devioe complies with Industry Canada licertseeitiernpt R55 standardls). Opaation is abject to the follmving two conditions: 11) this device may mtoauseinterrererxe, and (I) this device mist acoept any interiereroe, indlld'ng interference that rrray pause undesired operation ofrhe device. Le presentappareil estcornonriearprcNRdindistrieCanadaapplidriesauxawareils radioaenusdelioente. [exploitation est autorisée aux deux oonditions strivantes : ll) i'appareil ne doitpas pruhiiede Immillage, et (1) iirtiiisateurde l‘appareil doit acoepter tout bmuillage radioélectrique 9111, meme si le bmuillage m sttsoeyxmleden oomprrxneme le fonctionntanent. ForprodtmtavaflableinlhelfiA/(hnadamariet,onlycharud1-llcanbemeraled.5e(ectionnfmhfidlatnelsisn ot ptmible. Pour les produits dispunibles aux Etavssunis I Canada du rnarché, SeuI le mail a 11 peuvent éh'e militate; saectitxi d'aanes canaux n'est pas pdaibie. This devim and it’s antennasls) trust not be allocated or operathrgin mnjutcu'm with any outta anemia or bansnritter except in atmrdancewith ii: mulfisuansmitter prodxx promdures. catappareil etsortantenne (s) he doitpmétre mlocalise'soufoncfionmnentenmxjafimavec meanreanteme ou transrnetteur. Green Blinking: The CGN3 is connected to one of the LAN ports via a Fast Ethernet (100Mbps) link, and is transmitting or receiving data. On: The CGN3 is connected to one of the LAN ports via a Fast Ethernet (100Mbps) link. Blue Blinking: A device is connected to one of the LAN ports via a Gigabit Ethernet [1000Mbps) link, and is transmitting or receiving data. On: The CGN3 is connected to one of the LAN ports via a Gigabit Ethernet (1000Mbps) link. Off: No device is connected to one of the LAN ports. Green Blinking: The 2.4GHz wireless netwoik is enabled, and data is being transmitted or received. On: The 2.4GHz wireless network is enabled, and no data is being transmitted or received. Biscolor: Wi-Fi Protected Setup (WPS) is in operation. Off: The 2.4GHz wireless network is not enabled. lZAGHz) Congratulations! You have successfully set up your gateway. If you have any problems, see the sections below for help identifying file problem. If your gateway is successfully connected to the network (see LED display) but you cannot access the Internet from a connected computer, your computer's IP Address may be set up wrongly. In your computer’s control panel either ensure that the computer is configured to or ensure that it has a in the range . For more information, consult your Operating System '5 document. FCC Statement: Federal Communication Commisslon Interference Statement linsearrpntenthasbeentestedadiwidtooomplynrimrielimitsreraciasstdigitaideviee, pursuanttoPartl5 of the rcc Rules. These limits are designed Io provide reasonable protection wlmt harmful lnmrferenoe In a residential installation. This ernriprnait generates, uses and can radiate radio frequency energy and, it not Installed and used in accordance with rite instructions, may cause hamvfll Inlerfererioe to radio communications. Hcmever. there is no guarantee that Interference will not oocu‘ in a partiariar installation. it this eoripment does cause hannful interfaenoe to radio or television reoepeon, whleh eon be determined by turning the eqflpmenl off and on, the user Isertcouagedtatryloeovrectthelmerierencebyoneol the following meawrec: - Feorientor relocate the receiving antenna. - iricreasetiieseparatlortbetweendteeqnpnmtartdreoeiver. I 02mm deeqiiipmentintoan otnletm a clrcuitdiflereritlromuut mwhichthe receiver is unheated. . catsuitdtedeaierotan experlEiced radlo/T‘ltedlrlicinn forhelp. FCCCauthtmnymangesorimdlfltationsnmexpresslyappvmedbyillepartyresponsibleloroonpliamecwldvmd the taer’s annually to male this equlprrimt. This devlce Wieswlth Part 15 of the FCC Rules. Operation is mjecl to the following two conditions: in This device may not cause hamriul irnenertaioe, and (2) this devise must aooept any inuarierenoe received. Including inletfaence that may raise mdeslled operation. For pmdxt available in the USA/Canada unmet, only channel 1-11 can beeperated. Selection ofatha diarrnels is not possible. This devioe and it's anterlnasls) must not be oo-located or operating in mnjunction with any other antenna or transmitter exeept in aoraardanoe with FCC rnlltHransmItter product pruoedilfi. This devim is going to be weaned in sis-slscitz ireqmey rarge, it is restricted in indoor environment only. lite deviue mild auturtatitaslly dismriiinue mm in am of absence of infmmation to trananit, or operation-ill iailue. Note that this is not intended to pldlibit transm'sion oi mmml or signaling information or the use of repetitive m where mired by the tedinoipgy. Ie dispira‘lif pumait auimiaiicuanent m d'érriefln‘: en can d'absence d'infnrrnatiorts a Lransmettre, ou une défaillance opéatimlflle. Netez que ce "'51 pa l‘lnterltion dinterdire ia oansrnieion des infumatiuis de armhole ou de sigaliastim ou I'tm'lisatim de aides répétififs lorsoue reotris par la tacimoiogie. 11|e devire for the band 51505250 MHz is only for indoor usage to reduce potential for itarrniui interierenoe to txrd‘ialnel nubile satellite sysuare. ies digitisififs futcutirmnt dans la bmde 51505250 MHZ sont réseryt's uniquemem pour une utilisatim a l'iritérieur afin de reduire ies risques de bmuillage prejudicabie autsystémes de satellites mobiles milisant les rnérnes oarraux; IMPORTANT NOTE: IC Radiation Exposure Statement: Thisetniiprentuxrulieswiuiic RSSle radiation exptmreiimitsaetlmh foranunmntmlled environment. This equipmtartdmidheinsraiiedardopesatedwith minimmdistamelmnbflweaithemdiatnrfiymrbrfiy. DadaraadndeenstsictanaiaradiacidndeCarada: caeequipoWeomlrssir'nritesdeenassicionaiaradiaciondeiaicestabiecidosperaunarnbientemeormdado. memwsedebe'nstaiaryrperaromuradistana'andrrinadezncrnentreelradiadorysuarerpo. PIN :044001 0 1 45NO(1A)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2013:05:27 13:59:39+08:00 Creator : Adobe Acrobat 10.1.1 Modify Date : 2013:07:10 16:34:06+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2013:07:10 16:34:06+08:00 Creator Tool : Adobe Acrobat 10.1.1 Format : application/pdf Document ID : uuid:57d18f69-452f-4912-994a-1577a30c6cc1 Instance ID : uuid:2dd1d2ea-5133-4a73-bbc1-4c4885e11c7f Producer : Adobe Acrobat 10.1.1 Image Conversion Plug-in State : 1 Version : 1.1 Page Count : 2EXIF Metadata provided by EXIF.tools