Hitron TECHNOLOGIES CGNM D3 WiFi MoCA Gateway User Manual
Hitron TECHNOLOGIES D3 WiFi MoCA Gateway
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2288486 |
| Application ID | lsYNkzqRX69qEj/yam2TzQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 179.37kB (2242150 bits) |
| Date Submitted | 2014-06-08 00:00:00 |
| Date Available | 2014-06-08 00:00:00 |
| Creation Date | 2017-10-22 11:55:13 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-22 11:55:13 |
| Document Title | User Manual |
| Document Creator | Adobe Acrobat 10.1.8 |
QUICK START GUIDE HITRON CGNM 0 Connect to the network SI), 0 Set up your wireless network hitron Connect the cable port STEP Connect your cable outlet to the device's CABLE connector. Connect wired computers (optional) STEP You can use the included Ethemet cable to connect a computer to 4 one of the LAN ports. 1’7. 1" I}: Connect options STEP Your gateway has a configuration interface allowing complete 6 control over the device’s behavior. In a Web browser, enter 192.168.0.1 in the address bar. In the screen that displays, enter cusadmin as the usemame and password as the password. Uaewalue Passwuid Language English ll j Remember me on the computer Check the box contents STEP Look in the box and make sure you have the following: EI'HERNEI' CABLE QUICK START GUIDE The Hitron CGNM is a MoCA (Multimedia over Coax Alliance) equipped application gateway provides wireless high—speed Internet access and MoCA networking to the Ethemet—enabled devices in your home for fast and easy home entertainment network. Connect the power STEP Connect the power adaptor to me POWER port. Connect wireless devices (optional) STEP You can connect your wireless devices with the correct SSID and Passphrase. If you have not changed them, the default values are indicated on the sticker on the rear of the unit. E El 2.4GHz % SSID:A89876543210 El -- PassPhrasez987654321OAB i SSID:1234567890YZ -- PassPhrasetYZ1234567890 Press this button to begin the WiFi Protected Setup(WPS) Push-Button Configuration (PBC) procedure. Press the PBC button on your wireless clients in the coverage area within two minutes to enable them to join the wireless network. Setup Complete STEP Congratulations! You have successfully set up your gateway. 7 If you have any problems, see the sections below for help identifying the problem. IP addresses If your gateway is successfully connected to the network (see LED display) but you cannot access the Internet from a connected computer, your computer’s IP Address may be set up wrongly. In your computer’s control panel either ensure that the computer is configured to receive an IP address automatically (recommended) or ensure that it has a static IP address in the range 192.168.0.10~192.168.0.254. For more information, consult your Operating System’s document. Connect options WIRELESS DEVICES IV- COMPUTER MoCA Devices POWER ADAPTOR Blinking: Registration in progress (cable interface acquiring @ IP, Time of Day, Cable Modem configuration) On: Gateway is operational. STATUS Off: Gateway is offline. Green Blinking: The gateway is connected to one of the LAN ports via a Fast Ethernet (100Mbps) link, and is transmitting or receiving data. On: The gateway is connected to one of the LAN ports via a Fast Ethernet (100Mbps) link. Blue Blinking: A device is connected to one of the LAN ports via a Gigabit Ethernet (1000Mbps) link, and is transmitting or receian data. On: The gateway is connected to one of the LAN ports via a Gigabit Ethernet (1000Mbps) link. Off: No device is connected to one of the LAN ports. Off : The CABLE port is not connected to a coax socket, or the CABLE port is connected to a coax socket, but no other MoCA device has been detected on the coax network. ) Green steady: Another MoCA device has been detected on the MoCA coax network, and the CGNM has successfully made a connection. Green blinking: Data is being transferred to or from the CGNM over the coax network. FCC Statement: Federal Communication Commission Interference Statement This eqripment has been tested and found to couplywith the limits for a Clms B digihal device, pusuant to Part 15 of the FCC Rules. These limits are desigied to provide reasonable protection against harmful interference in a residential installation. This eqripment generates, uses and can radiate radio frewenq energy and, if not installed and used in accordance with the IllSthCtiOIB, may cause harrnfil interference to radio cornnuiications. However, there is no guarantee that interference wil not occu in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deterrninod by turning the emipment off and on, the user is encouaged to try to correct the interference by one of the following nieaslles: o Reorierit or relocate the receiving antema. 0 Increase the separation between the equipment and receiver. 0 calmed the nqlipmarlt into all millet an a Circuit different from that to which [in receiver is connected. 0 ConmIt the dealer or an experienced radio/TV mchnician for help. Fcc Caution: Anychanges or modifiatiars not exprmslyappmved by the party responsible for mmpliance could void the user's authority to operate this equipment. This device is geirg to be operated in 5.15-5.256Hz frecpenq' range. it is restricted in indoor erwironment only. This device complies with Part 15 of the FCC kilos. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must acceptarry interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. This device and it‘s antennas(s) must not be (no-located or operating in mnjunction with any other antenna or transrnittor except in accordance with FCC multi-transniitter product procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement: “H's eqlipmenl cnrlvb'es with FCC radiat'nn exposure limits set fmh for an umnntniled erlv'rmrnenl. This equipment M be insmlled and operated with minimum distance loan between the radiator a onl’ body. LED Display Blinking: No AC power, device is running on battery. J On: Device is running with AC power. Off: Not powered. POWER Green-Blinking: The modem is searching for the DOWNSTREAM Frequency. k Green—Steady: Downstream frequency is locked. (1 channel only) DOWNSTREAM Blue-Steady: Downstream frequency is locked. (channel bonding) Dark: Not scanning Green—Blinking: The modem is searching for the UPSTREAM Frequency. J Green-Steady: Upstream frequency is locked. (1 channel only) UPSTREAM Blue-Steady: Downstream frequency is locked. (channel bonding) Dark: Not scanning Green Blinking: The 2.4GHz wireless network is enabled, and data g is being transmitted or received. On: The 2.4GHz wireless network is enabled, and no data is being transmitted or received. 3:22:52: Bi-color: Wi-Fi Protected Setup (WPS) is in operation. Off: The 2.4GHz wireless network is not enabled. Green Blinking: The SGHz wireless network is enabled, and data is being transmitted or received. V On: The SGHZ wireless network is enabled, and no Wireless data is being transmitted or received. (56m) Bi-color: Wi-Fi Protected Setup (WPS) is in operation. Off: The SGHz wireless network is not enabled. Safety Warnings WARNING Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between 0°C ~ 40”C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device. Do not restrict the flow of air around the cable modem. The manufacturer assumes no liabilities for damage caused by any improper use of the device. DISCLAIMER The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice. CAUTION The cable distribution system should be grounded (earthed) in a accordance with ANS/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. COPYRIGHT O 2014 HITRON TECHNOLOGIES, INC. IC Statement: This device complies with Industry Canada lioenseexernpt R55 standard(s). Operation is abject to the following two conditions: (I) this deviw may not aim interference, and (1) this device must accept any interfererce, including inmrfereme that may cause uidesired nmr‘dfitfl of m; device. Le préseritapparedestconfolme aux CNRd'lndusfne Canada applicabieeaux appareiisladio exemplsdeliwnoe. L'eiqiloihfionestamorisée aux deux coodiiiorissur'vanles .' (1)I'appareilne dodpasproduirede brouillage, e! (2) [Montcalm rappelefldoitaceepfermbrouiflageradieélecinquembi, mémedlebmidflageestsusoephbled’eneomprornemelefoncbonnement For product avaflable in die USA/Canada market, only channel 1-" can be operated. Selection of other channels is not possible. Pourlasproduils disporiibiesaufoals—Um’s/Canadadumardié. seullerznal 1 a 11pewentétreexplorflés. Sélediondaubeswnauxnesipas possible, This device and it’s mtennxb) must not be oo-located or operating in conjunction with My other antenna or transmitter except in accordance with IC mum-transmitter product procedues. Celappareilolsonanlenne(s) mdonpaséflemmbésmmnmommmmamaafionmmemmnmmmfleun 11ie device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmftl interference to co-channel mobie satellite systems. memfsfizncbbnnanldanslabande 51505250Mstonln§eervésumquemenIpourune Ufluhonéhrdélieurafindeléduirelesnsquosde hmlagepréyudaaUeauxsystémasdesaMfitesmMesuflbambsnémescanaux. IC Radiation Exposure Statement: This equipment complies with IC RSS-IOZ radiation oxposire limits set forth for an moontrolled environment. This oqripment should be installed and operated with minimun distance 20cm between the radiator B your body. Cetéqmpemeritwwnbrme auxlimitas d'exposibori aux rayonnemenis iC élabbespoorun erivboririernerifnonwnbélé. Celéquipementdorfélre irnstalléefufltséavecunnunimumdeMcmdem Malamumederawnriememflvobemms, 0440010177N0(1A)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:04:14 15:13:59+08:00 Creator : Adobe Acrobat 10.1.8 Modify Date : 2014:06:03 18:54:17+08:00 Title : XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2014:06:03 18:54:17+08:00 Creator Tool : Adobe Acrobat 10.1.8 Format : application/pdf Document ID : uuid:305bef69-88bb-4ef5-abb1-1e63d2aae7c7 Instance ID : uuid:d74aa038-63c7-44f7-a133-eca5160f271e Producer : Adobe Acrobat 10.1.8 Image Conversion Plug-in Page Count : 2EXIF Metadata provided by EXIF.tools