Hitron TECHNOLOGIES HTGDS1 Garage Door Sensor User Manual 0440010185N0 3A

Hitron TECHNOLOGIES Garage Door Sensor 0440010185N0 3A

Contents

User Manual

HT-GDS1 0440010185N0(3A)Quick Guide / Manual Installation1. Activate BatterySlide open HT-GDS1’s top cover and pull the tab to activate it for pairing. 2. Join the NetworkFollow the instructions on your home control system to add a new HT-GDS1. During the joining need to slide off the top cover, the LED on the HT-GDS1 will blink while it’s searching for the network.More information about this process can be found at: http://www.hitron-americas.com Key Features Unobtrusive Compact Design3+ Year Coin Cell Battery LifeEasy Installation with Tape or ScrewsTamper Switch for Extra Security100m Open space, 60m + Inside RangeContentsHT-GDS1 1 CR-2032 BatteryScrews and Tape (2 each) LED Indicators/ TroubleshootingStatus/Action Description The LED will light green) for 2 seconds when the battery is inserted. (The LED will flash (green) 3 times every 5 seconds. It will quit flashing when it finds a network.Holding the tamper switch, inserting the battery, and releasing it while the LED is green (within 2 seconds of inserting the battery).Pressing and releasing the tamper switch 5 times within 5 seconds.Start using your HT-GDS1 HT-GDS1 is ONSearch for networkFactory resetForced rejoinLow battery The LED will light (red) always.CK 66 394V-0E87263D100+LED TabTamperswitchBatteryHitron’s Garage Door Sensor (HT-GDS1) enable you to monitor the opening of your garage door. Once the garage door opens to a 45 degree angle, HT-GDS1 will report open message from iControl Touchscreen.
3. Test HT-GDS1Test HT-GDS1 from the desired location before permanently installing it by flipping it forward as shown above, this is the same action as the garage door opening. Check if is reporting a close or open message from both orientations.4. Install HT-GDS1 Install HT-GDS1 on a clean surface by using double side tape or screws.5. Close HT-GDS1’s housingOnce you have confirmed is communicating, install it in its mounting plate on the garage doorHT-GDS1HT-GDS1TapeScrewMounting plateScrew holesOpen/ Close Test InstallAlignmentFlipTop coverWhere not to place(1) Metal can reduce transmission range(2) Damp or Rain or very humid area(3) Over 50 C or Below -10 Co o

Navigation menu