Hobbico 0008 Hovershot 720P Wi-Fi Camera User Manual DIDE0008 Hovershot indd

Download:
Mirror Download [FCC.gov]
Document ID	3118109
Application ID	Jm2ltZCsQs3/1OJYb7zVCA==
Document Description	Users Manual Part One
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	325.15kB (4064389 bits)
Date Submitted	2016-08-31 00:00:00
Date Available	2016-08-31 00:00:00
Creation Date	2016-08-18 16:45:33
Producing Software	Acrobat Distiller 15.0 (Macintosh)
Document Lastmod	2016-08-18 16:45:45
Document Title	DIDE0008 Hovershot.indd
Document Creator	Adobe InDesign CC 2015 (Windows)
Document Author:	ledwards

umum Hoveulm men I ‘
{<3
BEFORE FLYING, PLEASE
READ 8: UNDERSTAND
THESE INSTRUCTIONS!
and go to www.knowbeforeyoufly.org
H0 VE/Sho t mm:
(4} AAA
Spare Blades Eafleries
(2 black. 2 color)
\ Controller
N‘ FCCID:IYFMR1O
Dmmuta Hovershm FCC ID: IYF0008 Screwarlm\>
Duadcopler Fight k,“
Bane” <
Memory Cam - -E usa Charger
TO PREVENT MOTOR DAMAGE ALWAVS BE SURE THE THROTTLE IS
OFF WHEN THE BLADES ARE OBSTRUOTED OR CONTROL IS LOST.
IIIIIIIII START 6) ®% E
FlYIIIIi IIIIIIIE “moooocoooo
Do not move until
LEDs stop flashing. ‘on ‘
Use the left
stick to arm
the transmitter.
Hold for 1.5 seconds to
start or stop motors.
a}; s/Imms I2 an as: m
INSTALL BA'I'I'ERIES IN THE CONTROLLER —
Remove the screw and slide the cover
down to insert the included 4 AAA
batteries.
CHARGING
Plug charger into USB port or AC adapter
(DIDPt l 25 not included) as shown and connect
the battery. The red LED Will flash slowly while
the battery is charging The LED will be steady 4
When the battery is fully charged. ’
0 NEVER leave the battery unattended
While charging.
I DO NOT allow the USB portto
power down while the
charger is connected to the battery.
0 AUNAVS unplug the charger trom the USB port and the battery when
charging is complete.
I The battery connector will only fit in one Way.
CONTROLLER
Phone Holder
Auto Takeoff/Land Motor Start/Stop
Throttle Trim Elevator Trim
Video Button - m. Picture Button
RudderTrim
Aileron Trim
Throttle/Rudder Stick Aileron/Elevator Stick
LINKING —
The controller must be linked to the Hovershot and armed each time it is turned
on The Hovershot Will NDT link With the controller until the quad is level and
has been stationary tor 3 seconds.
1 Turn on the controller and connect the battery to the Hovershot.
2 Place the Hovershoton a level surface and do not move it until the controller
is armed The LEDs on the ouadcopter Will flash rapidly while the sensors
are initializing. The LEDs Will flash slowly when the Hovershot is linked to
the controller.
3 To arm the controller, move the throttle stick up to 100% and back down to
0%. Release the stick When the controller beeps The LEDs on the Hovershot
will stop tlashing when it detects that the controller is armed.
The Hovershot is now ready to tly.
DIDEnnnn Hovershot mdd 2
£9
NOW to FLV —
.9
Basic Flight
ttttTE: It you see that the Hovershot is going to crash. hold the Motor
Stop/Start button to turn off the motors.
ttttTE: Before making the lust flight With the Hovershot. please
perform the sensor calibration procedure described in the
Maintenance and Repair Section.
Place the Hovershot on a level surface Without any nearby obstacles, spectators.
or pets. The quad should face away from you.
Hold down the Motor Stop/Start button until the motors start to spin
Press the Auto Takeoff/Land button and the Hovershot will climb to about 3 feet.
As long as the throttle stick is not moved. the quad will try to stay at this height
The Hovershot will also take oft when the throttle stick is moved up. When the
quad is at the desired height, release the stick. The Altitude Hold function Will
keep the Hovershot at that height until the throttle stick is moved again.
Pressing the Auto Takeoff/Land button while the Hovershot is flying Will make
the quad descend When the quad reaches the ground. the motors Will stop
Ground Eflecl When the Hovershot is landing slowly and is very close to a
flat surface, it will often bounce up and down or slide away trom the landing
point because some air is bouncing up off the landing surface. The Altitude
Hold function will turn off the motors when the Hovershot is yust above any
solid obyect and the throttle stick is held below midpoint to make the landing
smoother. Unless the Hovershot is landing, keep the quad several inches above
the ground or other flat surfaces to avoid the ground effect.
WARNING: To prevent damage to the motors press the motor stop/start
button whene ver control is lost or the props cannot spin.
DUAL RATES
Push in on the right stick to change the control
sensitivity The default setting is low rates with a
blue Flight Mode lndicatoLThe indicator Will change
to orange when the controller is in high rates
The sensitivity at the high and low rate settings
can also be adyusted manually.
1. Select the setting to be adyusted.
2. Hold the throttle stick at the desired sen
(midstick is 50% of the maximum sensitivity).
3. Push down on the right stick until it beeps and release both sticks.
Please keep in mind that the low rate setting will he 50% less sensitive
than high rates for the same throttle stick position.
E/to/lms 12 an n m
FLIPS — USING THE DBONEVIEW APP —
To flip the Hovershot The DroneView app is lree soflware for yourWiFircapable Apple orAndroid device
1 Press down on the lelt stick until the
controller beeps once
2 Move the right stick in the desired tlip
direction.
3 IMMEDIATELYreIease both sticks so
the controller will be ready when the
fill) is completed.
LOW VOLTAGE INDICATORS —
The LEDs on the Hovershot will flash when the battery voltage is getting
low. After 30 seconds, the quadcopter Wlll automatically start to Autoland
Always remove the battery and recharge it hetole storing the Hovershot.
The controllerwill make 5 rapid beeps when AAA batteries heed to be changed
MOTOR OVERLOAO PROTECTION —
The Dromida Hovershot is equipped with motor overload protection
circuitry that shuts down the motors in the event the propellers
become blocked by an obstruction and throttle is applied. In order
to reset the overload protection you Will need to tree the hovershot
from the obstruction and cycle the power to the transmitter and the
quad lithe overload protection is triggered repeatedly orlate into allight,then it
may prematurely cause the low battery indicator to llash the LEDs. Disconnect
the battery and wait several seconds betore reconnecting it. ltthe LEDs continue
to ilash, then you must recharge the battery.
CAMERA —
The camera on the Hovershot can
record still photos and Video onto a
memory card. The camera lens angle
can be adiusted lrom level with the
quadcopterto down at a 45" angle.
The memory card slot
is on the left side oi the
Hovershot's body. Always
insert and remove the
card when the battery
is NOT connected to the
quadcopter.
.The camera needs 30 seconds to set up helore it can he used Wait
at least 30 seconds for a video to be saved before unplugging the
Hovershot’s battery
0 To avoid losing video tiles, the camera Will save and start a new video
every 5 minutes
0 The camera can capture a still photo while recording a video.
0 The camera can use the Droneview APP to stream live video and control
the camera with an Android or lDS device
Mormons Hmmim mad 3
that allows you to connect to the DroneView camera to use the FPV (First Person
View) lunction as well as to take videos and pictures and upload and view them
directly to your device
1 Install the "DroneView" app
irom Google Play (Android) or
the App Store (Apple) ‘
nnnniv w
wm
< Sellings
2. Insert the memory card into the
camera and connect a charged LiPo
battery to the Hovershot.
3. ins Only , Go to the WiFi setting
options in your deVice and select
the DroneView network. The actual
name at the Droneview nehMork Will
vary from the photo shown here. It
may take several seconds tor the
DroneView network to appear in the
available network list in proximity
to your device No password is
needed to connect to the DroneView
network. NOTE: Android devices
will automatically connect to the
DroneView WiFi network when the DroneView app is opened.
Apple and the Apple logo are trademarks oprple lnc., registered in the U.S. and
other countries App Store is a service mark oprple lnc Android'M and Google
Play are trademarks oi Google Inc.
wirri
« DRONEVlEWVVellew
mass A AETWDRK
HobbicnRD
HobblCDRDjGt-tz
Other ..
Ask to Jain Networks
“columnar“; ,mi r
Wirl‘i“D are WirFi Alliance“D are registered trademarks ol the WirFi Alliance
A. Grasp your device as shown and attach itto the phone mount on the controller
by pushing up on your phone against the spring loaded top clip until you can
lit the other side into the bottom clip.
5. With your deVice connected to
the Droneview WiFi network,
open up the DroneView app. It
may take several seconds tor the
app to locate and connect to the
DroneView WiFi network.
NOTE: It you’re in a populated
WiFi eninronment, it may take longer
s/ioizois mo 11 m
6. Once connected you will see on your device the image seen by the camera
(referred to in this manual as the FPV feed) Press anywhere on the screen to
pull up the main options.
Pie-turn Button - Press to take a still Image. Note pictures cannot be mken With
the app while recording is in progress
Video lutton — Press to start recording (red stop button appears on right when
recording)
File Gallery Button - Opens gallery to display contents of memory card for
vieWing, exporting and deleting.
Settings Iuttnn - Opens the setting menu.
NOTE: The FPV feed is for the purposes of displaying what the camera is
recording to improve the quality and accuracy of videos and pictures With respect
to the pilot’s intended iield of view. We do not recommend attempting to tly the
Hovershot relying solely on the FPV feed Delays in the FPV teed can cause the
image shown in the app to not represent the exact current position of the Hovershot.
Any interruption oi the FPV teed will not be present in the recorded video tiles
Flying without maintaining line a! sight oi the quad is unsale.
FILE EALLERY
Opening the tile
gallery displays the
contents of the
memory card in the
camera. Each
thumbnail represents
a picture or video.
Videos have a small
camera icon and the
length at the videos
on the thumbnails.
Pictures can be
viewed by clicking
on the picture
thumbnails in order
to view videos, you
must first export
them by pressing
Select and then pressing each thumbnail that you Wish to expoi1. Press Export
to upload the files to your device. Pictures and videos will be copied to your device‘s
camera roll. They can also be viewed in the OroneVieW app after the exporting
is complete by pressing the thumbnail you wish to view.
NOTE: We do not recommend exporting videos that exceed 3 minutes
in length because oi the amount oi time it Will take to export the files. For
longer videos or a larger quantity oi Videos, we recommend removing the
memory card from the camera and transferring the contents directly to a PC
using a card reader.
Dwuooon Hoveuimt indd A 2’»
When you have
contirmed that
the files have
been successfully
transferred to your
device's camera roll,
press Select and
choose the files you
wish to delete it you
no longer want them
in the tile gallery
SEI'IIIIES
saga? ‘? S
-J-
The settings menu
allows you to change
theWiFi name,adiust
brightness and
contrast, date code,
resolution mode, and
rotate camera view.
Changing the WiFi
Name will change
hoW the Camera is
identitied in the WiFi
network list
The Brightness and Contrast Will adjust the FPV teed display qualities. Video
and picture files Will have the same display qualities as the feed. Vou may wish
to experimentWith these settings depending on lighting conditions and personal
preferences. Press reset to return the brightness and contrast to the default values.
The Date Code Will display the current date on the FPV feed when the Date Code
is turned ON. The date Will also be seen in video recordings and pictures in the
same format as seen on the FPV feed The Date Code is automatically updated
to match the date of your device When connected via WiFi network.
Rotate View Will rotate the FPV feed and recorded videos and pictures 180”
This feature is needed when the OroneView camera is used independently of the
Hovershot With a separate R/C receiver and is mounted on top of a surface rather
than underneath like on the Hovershot
If you made any changes in the settings menu, then you will be prompted to save
when exiting the settings menu. it you select NO When prompted to save then
the changes Will be discarded iDS Only - If you change the WiFi name then you
Will need to exit the DroneView app and select the newly named network in the
WiFi setting options of your devrce.
IISIIIE TWO DEVICES SIMIILTAIIEIIIISLY
The DroneView camera can be connected With up to two devices simultaneously
Two deVices will have the ability to connect to the DroneView WiFi network and
share the FPV feed from the camera. Both devices Will also be able to take pictures
and start/stop Video recording.
NOTE: Exporting can only be done with one deVice at a time. Attempting to
exportfiies simultaneously from a OroneView camera to two devices may cause
the transfer to freeze.
TROUBLESHOOTING —
FLYIIIE mourns
PROBLEM:
SOLUTIO .
The Hovershot Will not respond to the controller.
) Charge or change the battery in the Hovershot. (2) Turn off the
controller and disconnect the battery for the Hovershot. Re-link the
Hovershot and controller
PROBLEM: Red controller LED light flashing aiter linking.
SOLUTION: Replace With newAAA batteries.
PROBLE nabie to ilip.
SOLUTION: Battery voltage too low
arm/ms tzoo um

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2016:08:18 16:45:45+08:00
Create Date                     : 2016:08:18 16:45:33+08:00
Metadata Date                   : 2016:08:18 16:45:45+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Format                          : application/pdf
Title                           : DIDE0008 Hovershot.indd
Creator                         : ledwards
Document ID                     : uuid:b4b7460d-b61d-4aad-a0f2-2ee684d9df1c
Instance ID                     : uuid:461a80cb-8ca5-45f6-a738-0c502477b4c4
Producer                        : Acrobat Distiller 15.0 (Macintosh)
Has XFA                         : No
Page Count                      : 4
Author                          : ledwards

EXIF Metadata provided by EXIF.tools