Hohem Technology DG1 3-AXIS HANDHELD STABILIZING GIMBAL FOR DSLR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3650402
Application ID	2KVEDvOBKRLBJ0hyXkULbQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.23kB (1102828 bits)
Date Submitted	2017-11-23 00:00:00
Date Available	2017-12-18 00:00:00
Creation Date	2017-11-20 17:16:32
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-11-20 17:17:00
Document Title	Users Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	hailie

DG1Quick Start Guide V1.0
Product Overview
(2) Place the mounting plate which the camera is mounted
on the clamping plate and tighten the screws
GuideV1.0
Tilting 360°
Rolling 360°
Web：www.hohem-tech.com
E-mail：service@hohem-tech.com
Tel：0755-86573216
（Copyright: Hohem Technology Co.,Ltd）
Tilt Axis
Roll Axis
Thumb Screw 1
L-Shape Mounting Plate
Screwing clockwise to fix the mounting plate
Thumb Screw 2
Button up the mounting
plate and clamping plate
via a Z-shape socket
3. Balancing：（1）Balancing the Tilt Axis
Lens Holder
Thumb Screw 3
Pan Axis
Panning 360°
UARTExtendedPort
Signal Indicator Light
Thumb Screw 5
a. Adjust tilt axis balance in horizon direction：Placethe gimbal like picture 3-1-a, hold the roll axis and keep
it in horizontal steady, position the camera lens pointing forwards and loosen the lens, observe the camera
status.
Thumb Screw 4
USB Port
5-Way Joystick
If camera lens
tilts upside
1/4”Extension
Screw Hole
Multifunctional Button(Power On/ Off)
Status Indicator Light
Loosen the thumb
screw 5, move the
camera forwards
through sliding arm
to make camera
balanced
If camera lens tilts downside
Move the camera backwards
through sliding arm to make
camera lens balanced.
Accessories List
Gimbal*1
DUO Handles*1
Single Handle*1
Short*1
Len Holder*1
3-1-a
Connecting Arm*1
L-Shape
Mounting Plate*1
Long*1
1/4 Inch Screw
18350 Battery*4
USB Cable*2 Battery Changer*2
b. Adjust tilt axis balance in vertical direction: Place the gimbal like picture 3-1-b, hold the roll axis and
keep it in horizontal steady,position the camera lens pointing upwards, then loosen the lens, observe
the camera status.
Allen Wrench*1
If camera lens
tilts backwards
Quick Installation
1.Insert 4PCS
18350 batteries,
ensure battery
positive pole upside
2.Camera Installation：（1）Install Mounting Plate
*4 PCS
(Please use the standard charger
for charging)
Adjust the
screw
making
mounting
plate
appropriate
position.
1/4 Inch short screw*1
Ensure the camera
tightly close to
mounting plate margin
If camera lens
tilts forwards
Loosen the thumb screw
4 on tilt axis, move the
camera downwards
through sliding arm until
camera is balanced.
Move the camera
upwards through
sliding arm until
camera is balanced
3-1-b
（2）Balancingthe
Roll Axis
Multiple Configurations
Place the gimbal like picture 3-2, hold the rollaxis and stay level, then loosen the camera, observe
the roll axis status.
By using 1/4 camera long screw to lock the DUO handles
If camera flops left
If camera flops right
Upright mode
Underslung mode
Briefcase mode
Vertical hold mode
Operating Instructions
5-Way Jostick
Loosen the thumb screw 1, move the camera to
right side until camera is balanced
3-2
UP/DOWN:Adjust tilt angle
Loosen the thumb screw 1, move the camera to
left side until camera is balanced.
Single press:Panning mode following, tilt axis&roll axis both locked, camera can move
to left or right smoothly, indicator light flash for once.
Double press: Panning&Tilting mode following,roll axis locked, camera can move to
left/right, and pitch rotate, indicator light flash for twice.
Triple press: locked mode, all 3 axis locked, the camera stays in its current orientation,
indicator light flash for triple.
Long press for 6 seconds: Enter into initialization calibration mode,status light is normal on.
（3）Balancing the Pan Axis
Place the gimbal like picture 3-3, hold the pan axis and stay level balanced, then release the camera,
observe the lens status.
If camera flops left
Horizontal
RIGHT/LEFT: Adjust pan angle
Multifunctional button(Switch working modes&status indicator light)
If camera flops right
Multi Functional Power on: Long press for 3 seconds until the status indicator light flash for twice.
Button&Status Power off: Long press for 3 seconds until the status indicator light flash for twice.
Indicator Light *More controllable functions can be realized by connecting auxiliary device in the UART extended port.
Loosen the thumb screw
3 on pan axis, move the
camera to right side
until camera is
balanced.
3-3
Loosen the thumb screw
3 on pan axis, move the
camera to left side until
camera is balanced.
4.Lens Is Fixed By The Lens Holder
After tilt, roll, pan axis balancings done, fix the lens by lens holder.
APP Connecting Instruction
(1) Scan the QR code and download APP
“Hohem Gimset” in APP Store or Google Play
(Support iOS system 8.0 or above and Android system 4.4 or above)
(2)Launch the bluetooth on the smartphone
（3）
镜头。
b.Loosen screw
bolt on the lens
holder, and fix the
lens with
shockproof cotton
strip to the lens
holder
Please scan the QR code to get
more functions introduction
Click the correct model
a.To adjust the lens holder position as per
the final lens position.
Connect the device
Make sure the bluetooth
is connected
Please scan the QR code to get
more products enquiries
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or changes to this equipment. Such modifications or
changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement, The device
can be used in portable exposure condition without restriction
Federal Communication Commission (FCC) Radiation Exposure Statement
Power is so low that no RF exposure calculation is needed.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : hailie
Create Date                     : 2017:11:20 17:16:32+08:00
Modify Date                     : 2017:11:20 17:17:00+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2017:11:20 17:17+08:00
Creator Tool                    : Microsoft® Office Word 2007
Format                          : application/pdf
Creator                         : hailie
Document ID                     : uuid:4a24de71-262b-42e9-812c-95b0d1e2cbff
Instance ID                     : uuid:d2852102-77fc-4b4f-b5ff-b919c096db2d
Producer                        : Microsoft® Office Word 2007
Page Count                      : 3

EXIF Metadata provided by EXIF.tools