Hoist Fitness 3 Tier Dumbbell Rack Cf 3461 Users Manual 3_PAGE 00 04 Cover
HOIST-CF3461-3
CF-3461-3 to the manual cae8b1ff-af56-44ab-a2ff-01e533ef15df
2015-02-05
: Hoist-Fitness Hoist-Fitness-3-Tier-Dumbbell-Rack-Cf-3461-3-Users-Manual-407515 hoist-fitness-3-tier-dumbbell-rack-cf-3461-3-users-manual-407515 hoist-fitness pdf
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
OWNER'S MANUAL CF-3461-3 3-TIER DUMBBELL RACK Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0507 - 002 Customer Service (800) 548-5438 (858) 578-7676 Fax (858) 578-9558 OWNER'S MANUAL CONTENTS INSTRUCTIONS ..................................................................... 02 FRAME ASSEMBLY .............................................................. 04 DECAL PLACEMENT............................................................. 07 DECAL REFERENCE............................................................. 08 PART LIST............................................................................... 09 ABBREVIATIONS................................................................... 10 BOLT SIZING CHART............................................................ 11 WASHER SIZING CHART...................................................... 13 MAINTENANCE SCHEDULE................................................. 15 GENERAL MAINTENANCE INFORMATION........................ 16 WEIGHT TRAINING TIPS....................................................... 17 EXERCISE LOG...................................................................... 18 LIMITED WARRANTY............................................................ 19 PAGE 01 CF-3461-3 ASSEMBLY OWNER'S MANUAL INSTRUCTIONS Before beginning assembly please take the time to read instructions thoroughly. Please use the various lists in this manual to make sure that all parts have been included in your shipment. When ordering, use part number and description from the lists. Use only HOIST replacement parts when servicing. Failure to do so will void your warranty and could result in personal injury. HOIST equipment is designed to provide the smoothest, most effective exercise motion possible. After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call your authorized HOIST dealer. Be sure to have your serial number and this manual when calling. When all parts have been accounted for, continue on. TOOLS REQUIRED Ratchet Wrench 1/2", 9/16" and 3/4" Sockets Adjustable Wrench Rubber Mallet Tape Measure Level Hex Key Wrench Set CF-3461-3 ASSEMBLY PAGE 02 OWNER'S MANUAL ***THIS PAGE WAS INTENTIONALLY LEFT BLANK*** PAGE 03 CF-3461-3 ASSEMBLY OWNER'S MANUAL FRAME ASSEMBLY CF-3461-3 ASSEMBLY PAGE 04 OWNER'S MANUAL FRAME ASSEMBLY NOTE: - WRENCH TIGHTEN HARDWARE. 10 13 13 13 11 15 2 3 1 11 13 5 3 PAGE 05 CF-3461-3 ASSEMBLY OWNER'S MANUAL FRAME ASSEMBLY NOTE: - WRENCH TIGHTEN HARDWARE. 9 14 4 8 1 12 7 12 6 CF-3461-3 ASSEMBLY 23 PAGE 06 OWNER'S MANUAL DECAL PLACEMENT 21 20 18 16 20 20 21 20 22 21 21 17 19 20 21 20 21 PAGE 07 CF-3461-3 ASSEMBLY OWNER'S MANUAL DECAL REFERENCE SERIAL # DECAL 021-0003341 021-0003347 021-0003008 021-0003135 021-0003627 021-0003221 CF-3461-3 ASSEMBLY PAGE 08 OWNER'S MANUAL PART LIST NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PAGE 09 PART NUMBER 026-01X5221 026-01X3209 026-01X3208 026-01M2276 026-01P3552 026-01PL2211-B 026-01PL2449 011-0101026 011-0101034 011-0107014 011-0102030 013-0402007 013-0102003 013-0102022 012-0304011 021-0003008 021-0003135 021-0003221 021-0003627 021-0003347 021-0003341 SERIAL # DECAL 012-0104008 DESCRIPTION SIDE FRAME ASSEMBLY UPPER TIER ASSEMBLY LOWER TIER ASSEMBLY END CAP DOMED SIDE PLATE RUBBER FOOT DUMBBELL SADDLE (THRU HOLE) 3/8"-16UNC X 1.00" BHCS (WZ) 3/8"-16UNC X 1.25" BHCS (WZ) 1/2"-13UNC X 5.00" HHB (WZ) 1/2"-13UNC X 5.25" HHB (WZ) 3/8" X 22mm FLAT WASHER (WZ) 1/2" X 27mm SAE FLAT WASHER (WZ) 3/8" INTERNAL LOCK WASHER 1/2"-13 UNC THIN NYLOCK NUT (WZ) DECAL COMMERCIAL MAINTENANCE 1.50" X 6.69" DECAL WARNING 1.50" X 6.69" DECAL HOIST 2.50" X 9.13" DECAL HOIST 2.12" X 7.75" DECAL 1,400 LB WEIGHT RATING FOR THIS TIER (1.63" X 1.63") DECAL PINCH POINT 1.07" X 2.13" (HORIZONTAL) DECAL SERIAL # 1.63" X 2.63" 3/8"-16 UNC THIN NYLOCK NUT (WZ) QTY. 2 1 2 2 4 4 60 60 2 4 8 120 24 2 12 1 1 2 2 6 6 1 60 CF-3461-3 ASSEMBLY OWNER'S MANUAL ABBREVIATIONS BZ = Black Zinc WZ = White Zinc HHB = Hex Head Bolt FHCS = Flat Head Cap Screw BHCS = Button Head Cap Screw SHCS = Socket Head Cap Screw SHSS = Socket Head Shoulder Screw CF-3461-3 ASSEMBLY PAGE 10 OWNER'S MANUAL BOLT SIZING CHART 1 3/4" 5/16" HHB 1 1/4" 2 3/4" 2 1/4" 4 1/4" 3 1/4" 2 1/2" 1 1/2" 1" 5 1/4" 4 1/2" 3 1/2" 4" 3" 2" 4 3/4" 3 3/4" 5 1/2" 5" 0" 2 3/4" 1 3/4" 3/8" HHB 2 1/4" 1 1/4" 0" 1" 2" 1" 1/2" SHSS 1 1/4" 1 1/2" 0" PAGE 11 1" 4" 5" 3 1/4" 2 1/2" 2" 5 1/2" 3 3/4" 2 3/4" 2 1/4" 5 1/4" 4 1/2" 3 1/2" 3" 1 3/4" 4 3/4" 4 1/4" 3 1/4" 5 1/2" 5" 3 3/4" 2 1/2" 1 1/2" 0" 4" 2 3/4" 2 1/4" 1 1/4" 5 1/4" 4 1/2" 3 1/2" 3" 2" 1 3/4" 1/2" HHB 4 1/4" 3 1/4" 2 1/2" 1 1/2" 4 3/4" 3 3/4" 3 1/2" 3" 4" CF-3461-3 ASSEMBLY OWNER'S MANUAL BOLT SIZING CHART (CONTINUED) 3/8" FHCS 3/4" 1 3/4" 1 1/4" 2 3/4" 2 1/4" 1 1/2" 1" 0" 2 1/2" 3" 2" 3/8" BHCS 3/8" SHCS 3/4" 1" 3/4" 0" 0" 1/2" FHCS 1/4" HHB 3/4" 3/4" 1 1/4" 1 1/2" 0" 1" 0" CF-3461-3 ASSEMBLY 1" PAGE 12 OWNER'S MANUAL WASHER SIZING CHART 013-0002003 1/4" FLAT WASHER SMALL, SAE, 13mm 013-0102028 3/8" CURVED WASHER 013-0102004 5/16" FLAT WASHER LARGE, USS, 22mm 013-0002004 3/8" FLAT WASHER SMALL, SAE, 21mm 013-0402007 3/8" FLAT WASHER 22mm O.D. 013-0102019 1/4" LOCK WASHER 026-01M0238 2" ALUMINUM FLATHEAD CAP 013-0402005 3/8" FLAT WASHER LARGE, USS, 25mm 013-0102020 3/8" LOCK WASHER 016-0009003 1" SHIM WASHER 013-0003004 1 1/16" FENDER WASHER 013-0102003 1/2" FLAT WASHER SMALL, SAE, 27mm 013-0102018 1/2" LOCK WASHER 013-0102026 1/2" FLAT WASHER LARGE, USS, 34mm 014-0018001 1/2" LONG SPACER 013-0003002 3/8" FENDER WASHER 026-01PL151 PLASTIC 1 1/16" FENDER WASHER 014-0018002 1" LONG SPACER PAGE 13 CF-3461-3 ASSEMBLY OWNER'S MANUAL WASHER SIZING CHART (CONTINUED) 026-01M0211 1/4" LONG FLANGED SPACER 026-01M211T 1/4" LONG HEAVY FLANGED SPACER 026-01M0788 .81" LONG HEAVY FLANGED SPACER 026-01M0789 .44" LONG HEAVY FLANGED SPACER 026-01M0600 .625" LONG FLANGED SPACER CF-3461-3 ASSEMBLY 026-01M0198 1/2" LONG FLANGED SPACER 026-01M0532 11/16" LONG HEAVY FLANGED SPACER 026-01M0780 .65" LONG HEAVY FLANGED SPACER 026-01M0762 1 1/2" LONG HEAVY FLANGED SPACER 026-01M0240 1 3/8" ALUMINUM FLATHEAD CAP 026-01M0760 1/2" LONG HEAVY FLANGED SPACER 026-01M0551 1" LONG HEAVY FLANGED SPACER 026-01M0761 1 11/16" LONG HEAVY FLANGED SPACER 026-01M0768 1 1/4" LONG HEAVY FLANGED SPACER 026-01M0239 1 5/8" ALUMINUM FLATHEAD CAP PAGE 14 OWNER'S MANUAL MAINTENANCE SCHEDULE ROUTINE COMMERCIAL MAINTENANCE HOME MAINTENANCE Inspect; Links, Pull Pins, Snap Locks, Swivels, Weight Stack Pins DAILY WEEKLY Clean; Upholstery DAILY WEEKLY Inspect; Cables or Belts and their tension DAILY WEEKLY Inspect; Accessory Bars, and Handles WEEKLY 3 MONTHS Inspect; All Decals WEEKLY 3 MONTHS WEEKLY 3 MONTHS Inspect; Anti-Skid Surface WEEKLY 3 MONTHS Clean & Lubricate; Guide Rods with a Teflon (PTFE) based lubricant (Superlube) MONTHLY 3 MONTHS Lubricate; Seat Sleeves, Turcite Bushings, Linear Bearing MONTHLY 3 MONTHS Clean and Wax; All Glossy Finishes 6 MONTHS YEARLY Repack with Grease; Linear Bearings 6 MONTHS YEARLY YEARLY 3 YEARS Inspect; All Nuts and Bolts, Tighten if needed Replace; Cables, Belts and Connecting Parts LATEST DATE ENTRY Your equipment comes with a commercial maintenance decal. For personal, in home use, please follow the home maintenance schedule listed above. PAGE 15 CF-3461-3 ASSEMBLY OWNER'S MANUAL HOIST FITNESS SYSTEMS GENERAL MAINTENANCE INFORMATION Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins: *Check all pieces for signs of visible wear or damage. *Check springs in snap hooks and pull-pins for proper tension and alignment. *If the spring sticks or has lost its rigidity, replace it immediately. Upholstery: *To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout. *Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any abrasive cleaners or cleaners not intended for use on vinyl. *Replace ripped or warn upholstery immediately. *Keep sharp or pointed objects clear of all upholstery. Decals: *Inspect and familiarize yourself with any safety warnings or other user information posted on each decal. Nuts and Bolts: *Inspect all nuts and bolts for any loosening and tighten if needed. *Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper. Anti-Skid Surfaces: *These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery. Belts and Cables: *Hoist uses only high quality belt, and mil-spec cables. *Visually inspect the belts and cables for fraying, cracking, peeling or discoloration. *While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas. *Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced. Belt and Cable Tension: *Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached. *Check slack in cables and re-adjust cable tension if needed. Seat Sleeves, Guide Rods: *Wipe down adjusting tubes with a dust free rag before applying lubricant. *Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray. Linear Bearings: *Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease. PLEASE KEEP THIS FOR YOUR RECORDS CF-3461-3 ASSEMBLY PAGE 16 OWNER'S MANUAL WEIGHT TRAINING TIPS Use this manual to guide you through the basic exercises you can perform on your CF-3461-3 HOIST® Fitness System. To gain maximum results and avoid possible injury, consult a fitness professional to develop your complete exercise program. Always consult your physician before starting any exercise program. To be successful in your exercise program, it is important to develop an understanding of the basic principles of strength training. Now that you have your CF-3461-3 HOIST® Fitness System, it is only natural that you want to get started immediately. First, determine a set of realistic goals and objectives for yourself. By deciding on an exercise plan that is right for you prior to starting, you will contribute significantly to your success. Warm up properly before engaging in weight resistance training. Stretching, yoga, jogging, calisthenics or other cardiovascular exercise can help prepare your body for the heavier workload of lifting weights. Learn how to perform the exercise correctly before using heavy weight. Correct form is important to avoid injury and to ensure that you work the proper muscle groups. Know your limitations. If you are new to weight training or are embarking on an exercise regimen after a long layoff, start slowly and build foundational strength over a longer period of time. Pay attention to your breathing. Exhale when you exert is a general rule of thumb. Never hold your breath. Enjoy your CF-3461-3 HOIST® Fitness System! PAGE 17 CF-3461-3 ASSEMBLY OWNER'S MANUAL S =S e ts R =Re pe titio n pe r s e t W =We ig ht us e d WEIGHT TRAINING EXERCISE LOG Date Exe rc is e S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W To tals PAGE 18 CF-3461-3 ASSEMBLY OWNER'S MANUAL HOIST FITNESS SYSTEMS LIMITED LIFETIME WARRANTY Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it (at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal. transportation or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear. WARRANTY CLAIMS. All claims require: Model number, Serial number, Date of installation, and any information supporting the existence of the alleged defect. To complete Warranty Registration visit: www.HOISTFITNESS.com and click on the Warranty Registration link Starting from the original date of purchase, normal wear and tear shall be considered as the following: COMMERCIAL USE: All malfunctions of upholstery, grips, paint, and chrome that occur after one year; all malfunctions of electronic components, belts, or cables after one year; all malfunctions of pulleys, bearings, or bushings that occur after five years. The frame and all welded components are warranted for the life of the product. HOME USE: All malfunctions of grips, paint, and chrome that occur after ten years; all malfunctions of electronic components, belts, cables, or upholstery that occur after ten years; all malfunctions of pulleys, bearings, or bushings that occur after ten years. The frame and all welded components are warranted for the life of the product. PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE. Refer to the instructions page of your owners manual or consult with you fitness product dealer to establish if a product is made for commercial use or not. Using a non-commercial product in a commercial setting can result in serious injury or death! Hoist Fitness Systems sole responsibility shall be to repair or replace the component within the terms stated above. Hoist Fitness Systems shall not be liable for any loss or damage of any kind including any incidental or consequential damages resulting, directly or indirectly from any warranty expressed or implied or any other failure of this product. WHAT IS NOT COVERED BY THIS WARRANTY Hoist's sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additions below. This warranty neither assumes nor authorizes any person to assume obligations other than expressly covered by this warranty. NO CONSEQUENTIAL DAMAGES. Hoist is not responsible for economic loss; profit loss; or special, indirect, or consequential damages. WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These warranties are exclusive and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no warranties which extend beyond the description on the face hereof. TRANSPORTATION COSTS. Hoist will accept parts covered under this warranty freight collect, provided that shipment has received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either repaired or replaced under these warranties. Hoist Fitness Systems 9990 Empire St. #130 San Diego, CA. 92126 (800)548-5438 PLEASE KEEP THIS FOR YOUR RECORDS PAGE 19 CF-3461-3 ASSEMBLY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:11:07 14:23:03-08:00 Create Date : 2007:05:08 07:47:36-07:00 Metadata Date : 2008:11:07 14:23:03-08:00 Format : application/pdf Title : CF-3461-3_PAGE 00-04 - Cover Creator : tbenson Document ID : uuid:c4f99f22-842a-4447-b945-b5df2b1a95f3 Instance ID : uuid:13e549d2-cedf-4ebb-873a-e9175e0234eb Page Count : 20 Author : tbensonEXIF Metadata provided by EXIF.tools