Holtzbrk Publishers ICL24B i clicker Base Unit User Manual 2 4GHz Base Instructionsx

Holtzbrinck Publishers i clicker Base Unit 2 4GHz Base Instructionsx

Users Manual

Macmillan New Ventures Macmillan Publishers Holtzbrinck Publishers 2.4GHz i>clicker Base Instructions Start Up 1. Plug the USB base directly into a USB port on your computer. 2. Download the i>clicker software onto your computer. The software is available for download from www.iclicker.com. 3. Locate the i>clicker software on your computer and double click the i>clicker icon to start the program. The software will recognize the base and enable the Start New Session button. 4. Choose your class or click Create to create a new class. 5. Click Start New Session. The Session Toolbar appears in the top left corner of your computer screen. Using i>clicker in Class 1. Click the Start button on the Session Toolbar to begin polling. Click the Stop button to stop polling. Note: the options on the Session Toolbar vary depending on the version of i>clicker software you use. 2. Click the Results button on the Session Toolbar to view student results in the Results Chart. For more information about using i>clicker, visit www.iclicker.com. Model: ICL24-B FCC ID: T24-ICL24B IC: 6495C-ICL24B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.
Macmillan New Ventures Macmillan Publishers Holtzbrinck Publishers Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Holtzbrinck Publishers might cause harmful interference and void the FCC authorization to operate this product. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an output on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This product complies with FCC OET Bulletin 65 & Industry Canada’s RSS-102 radiation exposure limits set forth for an uncontrolled environment English: This Class B digital apparatus complies with Canadian ICES-003. French: Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. Cet appareil est conforme à la Partie 15 des règlements de la FCC et d'Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu