Holy Investment AD22 Racer(Tablet Holder Wheel) User Manual AD22 V1 FINAL
Holy Investment Co., Ltd. Racer(Tablet Holder Wheel) AD22 V1 FINAL
manual
1.
Safety Information
1. Do not use this product near water or moisture.
2. This product is NOT weatherproof.
3. Clean only with a dry lint-free cloth.Disconnect the power source before cleaning.
Do not use any chemicals or cleaners.
4. Do not install or use near any open flame or heat sources, such as radiators,
heat registers, stoves, grills, or other devices that produce heat.
5. Do not expose to direct sunlight.
6. Only use accessories specified by the manufacturer.
Important Safety Instructions
1. Read and keep this manual.
2. Always consider the environmental issues and follow local regulations when disposing of
batteries. If the product will not be used for a long period of time, please remove batteries.
3. Refer all servicing to qualified service personnel.
4. When service is required, refer servicing to qualified service personnel under the following
conditions：
（1）When USB cable is damaged.
（2）If liquid has been spilled, or objects have fallen into the device.
（3）If the device has been exposed to rain or water.
（4）If the device does not operate normally by following the operating instructions. Adjust
only by following the operating instructions as improper adjustments of other controls
may result in damages.
6.
4. Connect Tablet to Bluetooth speakers
1. Place 4 pcs of standard AA batteries to the battery compartment.
2. Switch to AA battery mode (DC 6.0V).
AA battery * 4
5V,1~2A 5V,1~2A
5V,1~2A
2.
Product & Accessory
Features
1.Racer *1
2.Manual *1
3.Mini USB Cable *1
4.AA battery * 4
- Ergonomic design for ultra comfort and control
- Retractable clips for Tablets with all dimensions (7”-10.1”)
- Dual bluetooth speakers
- Supplying power to speakers through USB adaptor of Tablets
Specification
Bluetooth: V2.0CLASS_2
Frequency Range: Bluetooth RF 2.4GHz~ 2.4835GHz
Power supply: AA battery * 4 (DC 6.0V) or mini USB cable connecting to USB adaptors
( DC 5.0V/1A~2A ) of Tablets
Speakers: 3W/4Ω * 2 stereo output
Bluetooth Effective Range: 10 meters in open space
AA batteries operation time: 6 hours for constant usage
mini USB cableAA battery * 4
7.
3. Turn on the Product by pressing button. When the power indicator shows solid
GREEN light, the Product has been turned on successfully.
4.Go to Bluetooth setting in Tablet. Selet “Cideko Racer” and input Pin code “0000” to
connect Tablet with Bluetooth speakers. When Bluetooth speakers are connected to
Tablet successfully, the blue light will stop flashing and go out. The stereo sound will
be played through speakers.
mini USB cable
+
5V,1~2A
5V,1~2A 5V,1~2A
The power of speakers can be supplied by standard Tablet USB adaptor ( DC 5.0V/1A ~2A ).
Switch the Product to USB mode while supplying power through USB adaptors.
3.
Installation Guide
1. Align the gear to assemble Racer wheel onto Base.
2. Press the button in the back to assemble Racer wheel and Base.
3. Release the button to complete assembly.
1. Assemble Racer wheel to base
8.
5. After connecting to Bluetooth successfully, if there is no audio out for more than
1 minute, the Bluetooth goes into stand by mode and the blue light will start
flashing in a slow motion (3 times in 5 seconds). When the stereo sound is activated,
the blue light will go out.
5. Adjusting volume of sound
1. Press the control keys (V+ / V-) to adjust the volume of sound.
2. When voltage is lower than 4.0 V, the power indicator (GREEN) will start flashing. When the
voltage is lower than 3.2 V, the product will shut down automatically.
3. Please adjust Tablet PC to appropriate volume for ultimate performance.
6. Power off
1. Press the button for more than 2 seconds anytime during usage to force shut down the
Product.
LED Indicators
1) Bluetooth connecting: Blue LED flashes 3 times in 2 seconds while searching the device to link.
2) Power Key
Sufficient power: Solid Green LED on.
Low battery: Green LED flashes slowly.
9.
Troubleshooting:
If Racer does not work properly, please force shut down the Product by switching power supply to USB
mode and rebooting the Product again. If Racer does not work properly after the above steps have
been performed 3 times, please consult your dealer.
Warranty Information:
Racer comes with 2 year limited warranty. Please contact your dealer
for details in case of warranty claims. The warranty will void in the case that the
defect has been caused by misuse, neglect, improper installation, repair, alteration
or accident. Cideko bears no responsibility for failure or defect caused by any third
party product or components whether authorized or not.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
5V,1~2A
Racer User Manual
Bluetooth
R
4.
2. Attach Tablet to Racer wheel
1. Adjust the Racer Wheel horizontally. 2. Push the button to extend the clips to maximum.
3. Loosen the knob according to different
thickness of Tablet.
4. Press the clips by hands to accommodate
Tablet with different dimensions (7”~10.1”)
5.
5. Adjust clip height by fastening the knob to accommodate
Tablet with different thickness. (9mm ~18.5mm)
2. Loose the knob to adjust clip height to maximum.
3. Remove Tablet from Racer Wheel
1. Adjust the loaded Racer Wheel horizontally.
3. Push the button to extend the clips to maximum. 4. Take out the Tablet.