Home Skinovations SENSEPIL SENSEPIL HAIR REMOVAL DEVICE User Manual USERS MANUAL
Home Skinovations Ltd. SENSEPIL HAIR REMOVAL DEVICE USERS MANUAL
USERS MANUAL
1
INSTRUCTIONS FOR USE
2
Silk’n SensEpil™ is a powerful device. As such, it should be used with special attention to safety.
Please read all warnings and safety precautions before use, and strictly follow them when using Silk’n SensEpil™!
Note! Silk’n SensEpil™ may not be effective on naturally white and light hair.
Do not use Silk’n SensEpil™ on naturally dark skin!
Not Safe
Do not use Silk’n SensEpil™ on the face or neck!
Do not use Silk’n SensEpil™ on tanned skin or after recent sun exposure! Such use can cause serious burns or skin injury.
Plan your Silk’n SensEpil™ hair removal for best results
Typical Silk’n SensEpil™ hair removal plan during a full hair growth cycle:
The first 3-4 hair removal sessions with Silk’n SensEpil™ will be approximately two weeks apart.
Hair removal sessions 5-7 with Silk’n SensEpil™ will be approximately four weeks apart.
After that you will typically use Silk’n SensEpil™ again from time to time if and when needed, until long-term results are achieved.
Typical maintenance with Silk’n SensEpil™ after achieving long-term hair removal:
Due to hormonal or other physiological changes dormant hair follicles may become active. Maintenance hair removal sessions with Silk’n SensEpil™
may be required from time to time.
3
Copyright 2008 © Home Skinovations Ltd. All rights reserved.
Print date: April 2009
Home Skinovations Ltd. reserves the right to make changes to its products or specifications to improve performance, reliability, or
manufacturability. Information furnished by Home Skinovations Ltd. Is believed to be accurate and reliable at the time of publication. However,
Home Skinovations Ltd. assumes no responsibility for its use. No license is granted by its implication or otherwise under any patent or patent
rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without
the express written permission of Home Skinovations Ltd.
Data is subject to change without notification.
Home Skinovations Ltd. has patents and pending patent applications, trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other
intellectual property rights except as expressly provided in any written agreement from Home Skinovations Ltd.
Specifications are subject to change without notice.
Home Skinovations Ltd. Apolo Building, Shaar Yokneam POB 533, Yokneam 20692, ISRAEL www.silkn.com, info@silkn.com
1. What is Silk’n SensEpil™......................................................................................................................................................................................................................................p.4
1.1. Silk’n SensEpil™ device description............................................................................................................................................................................................................................p.4
1.2. Package contents...................................................................................................................................................................................................................................................................p.4
1.3. The Disposable Lamp Cartridge...................................................................................................................................................................................................................................p.4
2. Silk’n SensEpil™ Intended Use........................................................................................................................................................................................................................p.4
2.1. Silk’n SensEpil™ intended use........................................................................................................................................................................................................................................p.4
3. Safety with Silk’n SensEpil™.............................................................................................................................................................................................................................p.5
4. Contraindications.........................................................................................................................................................................................................................................................p.5
5. When to avoid using Silk’n SensEpil™.....................................................................................................................................................................................................p.6
6. Precautions – How to use Silk’n SensEpil™ safely......................................................................................................................................................................p.6
7. Reducing the risk of injury...................................................................................................................................................................................................................................p.7
8. Possible Side Effects using Silk’n SensEpil™......................................................................................................................................................................................p.8
9. Long Term Hair Removal the Silk’n SensEpil™ Way..............................................................................................................................................................p.9
9.1. How does light remove hair?.........................................................................................................................................................................................................................................p.9
9.1.
How does the hair growth cycle impact light-based hair removal?
..........................................................................................................................................................p.9
9.3. Plan your Silk’n SensEpil™ hair removal for best results...............................................................................................................................................................................p.10
10. First steps with Silk’n SensEpil™...............................................................................................................................................................................................................p.10
10.1. Silk’n SensEpil Setup™....................................................................................................................................................................................................................................................p.10
10.2. Treating with Silk’n SensEpil™ for the first time...........................................................................................................................................................................................p.10
10.3. What to Expect when treating with Silk’n SensEpil?™..............................................................................................................................................................................p.12
10.4. After treating with Silk’n SensEpil™.......................................................................................................................................................................................................................p.12
11. Maintenance of Silk’n™ SensEpil..............................................................................................................................................................................................................p.12
11.1. Cleaning Silk’n SensEpil™..........................................................................................................................................................................................................................................p.12
11.2. Replacing the LAMP CARTRIDGE...........................................................................................................................................................................................................................p.12
12. Troubleshooting......................................................................................................................................................................................................................................................p.13
12.1. “My Silk’n SensEpil™ does not start.”..................................................................................................................................................................................................................p.13
12.2. “A light pulse is not emitted when I press the PULSE SWITCH”..........................................................................................................................................................p.13
13. Customer Service....................................................................................................................................................................................................................................................p.14
14. Frequently Asked Questions.........................................................................................................................................................................................................................p.14
15. Specifications...............................................................................................................................................................................................................................................................p.15
16. Labeling.............................................................................................................................................................................................................................................................................p.16
EC Declaration of Conformity...........................................................................................................................................................................................................................p.17
Table of Contents
4
1. Before You Start
Before using Silk’n SensEpil™ for the first time, please read this User Manual in its entirety. Pay particular attention to sections on device use
procedures, device operation, and after-use procedures.
We recommend you re-familiarize yourself with this User Manual before each use of Silk’n SensEpil™.
Silk’n SensEpil™ is a light-based device for long-term hair removal designed for home-use.
1.1. Silk’n SensEpil™ device description
Your Silk’n SensEpil™ consists of a BASE UNIT with a CONTROL PANEL, an APPLICATOR and a DISPOSABLE LAMP CARTRIDGE.
On the Silk’n SensEpil™ APPLICATOR you can find the PULSE BUTTON. The DISPOSABLE LAMP CARTRIDGE is located at the APPLICATOR TIP.
Silk’n SensEpil™ is a powerful electrical device. As such, it should be used with special attention to safety.
Please read all warnings and safety precautions before use, and strictly follow them when using Silk’n SensEpil™
Base unit
Control panel
Applicator
Disposable lamp cartridge
1
4
2
3
Power on/standby switch
Stand by indicator light
Power on indicator light
Ready indicator light
6
5
8
7
Energy level setting buttons
Energy level indicator lights
Replace cartridge indicator light
Skin tone warning indicator light
9
11
12
10
System warning indicator light
Pulse button
Disposable lamp cartridge
Applicator tip
15
16
14
13
1
4
235
6
7
8
9
10
11
12
13
14
16
15
1.2. Package contents
Upon opening the Silk’n SensEpil™ package, you will find the following parts:
Silk’n SensEpil™ BASE UNIT and APPLIC ATOR
An AC cord
This User’s Manual
An Instructional DVD
1.3. The Disposable Lamp Cartridge
The Silk’n SensEpil™ DISPOSABLE LAMP CARTRIDGE can fire 750 light pulses (regardless of the energy level of these pulses). For average body size 750 light
pulses could cover for example: One treatment sessions of 2 Legs, 2 Arms, 2 Underarms, and Bikini line.
Or Tw o treatments sessions of 2 legs and 2 Underarms. Or Ten treatments sessions of 2 Underarms and Bikini line
Depending on the body areas you wish to treat, you will typically need to use from one to seven DISPOSABLE LAMP CARTRIDGES during the first year of
using Silk’n SensEpil™.
5
2. Silk’n SensEpil™ Intended Use
3. Safety with Silk’n SensEpil™
4. Contraindications
Important Safety Information – Read Before Use!
Silk’n SensEpil™ is intended for removal of unwanted hair.
Silk’n SensEpil™ removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment also exist in the surrounding
tissue of skin. The quantity of pigment in a particular person’s skin, which is manifested by their skin complexion, determines the degree of
risk they are exposed to using any method of light based hair removal.
With Silk’n SensEpil™ Safety Comes First.
HPL™ technology in Silk’n SensEpil™ - Superior safety with lower energy level
Home Pulsed Light™ technology is able to achieve long-term hair removal results at a fraction of the energy level used in other light-based hair removal
equipment. The low energy used in Silk’n SensEpil™ reduces its potential to cause harm or complications, and contributes to your overall safety.
Silk’n SensEpil™ protects your skin
Light based hair removal is not suitable for naturally darker skin tones or tanned skin. Silk’n SensEpil™ comes with a built-in SKIN COLOR SENSOR that is
designed to measure the complexion of the applied surface and enable application only on suitable skin complexions. This unique safety feature will not
let you treat where your skin is too dark or too tanned.
Furthermore, The 2X3cm² OPTICAL LENS through which pulses of light are delivered is recessed inside the LAMP CARTRIDGE at the APPLICATOR TIP. This
enables Silk’n SensEpil™ to protect your skin by avoiding direct contact between the OPTICAL LENS and the skin.
Silk’n SensEpil™ protects your eyes
The Silk’n SensEpil™ APPLICATOR has a built-in safety feature for eye protection. It has been designed so that a light pulse can not be emitted when the
APPLICATOR is facing open air. The safety switch is activated only when the APPLICATOR TIP is in contact with the tissue.
2.1. Silk’n SensEpil™ intended use
Silk’n SensEpil™ may be used to remove unwanted body hair.
Ideal body areas for Silk’n SensEpil™ use include the underarms, bikini line, arms and legs.
Silk’n SensEpil™ is not designed for everyone. Please read and consider the information in the following section before use. For further information and
personalized advice you may also visit www.silkn.com or your local Silk’n™ domain.
If you are unsure if Silk’n SensEpil™ is safe for you to use, please ask your doctor or dermatologist!
DO NOT USE Silk’n SensEpil™ on naturally dark skin complexion!
6
Using Silk’n SensEpil™ to remove facial hair may cause serious eye injury and may stimulate facial hair growth.
If you are pregnant or nursing (lactating).
If you were exposed to strong sunlight or an artificial tanning machine during the past 28 days.
If you have a tattoo or permanent makeup on the area to be treated.
If you have dark brown or black spots, such as large freckles, birth marks, moles or war ts on the area to be treated.
If you have eczema, psoriasis, lesions, open wounds or active infections, such as cold sore in the area to be treated. Wait for the effected area to heal
before using Silk’n SensEpil™.
If you have a history of kelodial scar formation, a known sensitivity to light (photosensitivity) or are taking medication that makes the skin more
sensitive to light, including non-steroidal anti-inflammatory agents, (e.g., aspirins, ibuprofens, acetaminophen), tetracyclines, phenothiazines, thiazide,
DO NOT USE Silk’n SensEpil™ on the face or neck
NOTE! Silk’n SensEpil™ is not effective on light hair
Unlike body hair, most of women’s potential facial hair remains inactive and hidden, while only a fraction of it grows and surfaces. Exposing
facial hair to the light pulses of Silk’n SensEpil™ may remove apparent hair but simultaneously stimulate unwanted growth of hidden hair
DO NOT ATTEMPT TO USE Silk’n SensEpil™ on tanned skin or after recent sun exposure! Such use
can cause serious burns or skin injury.
Avoid exposure to the sun for 4 weeks before your Silk’n SensEpil™ treatment!
Silk’n SensEpil™ is not recommended for use on the face or neck.
The Silk’n SensEpil™ device is not effective on naturally white, grey, blond and red body hair. If your body hair is of these colors, Silk’n SensEpil™ will
not work on you.
Certain conditions may prevent the use of Silk’n SensEpil™ temporarily. DO NOT USE Silk’n SensEpil™ if any of the following currently apply to you:
5. When to avoid using Silk’n SensEpil™
Treating dark skin with Silk’n SensEpil™ can result in adverse effects such as burns, blisters, and skin color changes (hyper- or hypo-pigmentation).
A unique SKIN COLOR SENSOR is embedded in Silk’n SensEpil™ to measure the treated skin complexion at the beginning of each session and
occasionally during the session. The SKIN COLOR SENSOR ensures that pulses will only be emitted on suitable skin tones.
Using Silk’n SensEpil™ on skin that has been recently exposed to sunlight can result in adverse effects such as burns, blisters, and skin color changes
(hyper- or hypo-pigmentation).
DO NOT ATTEMPT TO USE Silk’n SensEpil™ on naturally dark skin!
It will not operate!
See skin color table on the inside of the cover
DO NOT USE Silk’n SensEpil™ on tanned skin or after recent sun exposure!
Tanned skin particularly following sun exposure, contains large quantities of the pigment Melanin. This applies to all skin types and
complexions, including those which don’t seem to tan quickly. The presence of large quantities of Melanin exposes the skin to higher risk
when using any method of light based hair removal.
7
Energy level refers to the intensity of the light pulse that is projected on your skin during use, from the lowest level (-) to the highest level (+).
INDICATOR LIGHTS on the CONTROL PANEL illustrate the energy level at which the machine is set. As the energy level increases, so do the results of
Silk’n SensEpil™ as well as the risk of side effects (see “Possible Side Effects” below).
Always begin your first use of Silk’n SensEpil™ at the lowest energy setting (one light at “-“)!
Only if you experience little or no discomfort during and after use of Silk’n SensEpil™ at the lowest energy setting, raise the energy level by one
INDICATOR LIGHT the next time you use Silk’n SensEpil™, and so on for each subsequent hair removal session.
For detailed instructions on energy level setting see “Energy Level” box in the “Treating with Silk’n SensEpil™ for the first time” section.
Avoid adverse effects!
Do not treat the same area of skin more than once per hair removal session!
Try to avoid overlapping pulses!
If your skin blisters or burns, STOP USE IMMEDIATELY!
Avoid complications after use of Silk’n SensEpil™!
Do not expose treated areas of skin to the sun!
Sun exposure includes unprotected exposure to direct sunlight of over 15 minutes constantly, or unprotected exposure to diffuse sunlight of over
1 hour constantly.
To protect recently treated skin when exposed to sunlight, be sure to thoroughly apply sunscreen SPF 30 or higher, for 2 weeks after each hair
removal session.
Always shave the area to be treated and make sure that the skin is clean and dry before using the Silk’n SensEpil™.
Cover birthmarks and tattoos before Silk’n SensEpil™ application.
Cover dark brown or black spots, such as large freckles, birth marks, moles or warts before Silk’n SensEpil™ application.
Never look directly at the light coming from the Silk’n SensEpil™ APPLICATOR and LAMP CARTRIDGE.
Do not use Silk’n SensEpil™ on nipples and genitals (male or female).
Do not use Silk’n SensEpil™ on any body site where you might later want hair.
Do not use Silk’n SensEpil™ for any purpose other than hair removal.
Never point the Silk’n SensEpil™ APPLICATOR in an attempt to emit a light pulse into open space. Always make sure that the APPLICATOR is pointed
at, and in full contact with the skin during application.
Remove the Silk’n SensEpil™ APPLICATOR from the skin if either the skin or the APPLICATOR is too hot.
Choose your energy levels CAREFULLY!
6. Precautions – How to use Silk’n SensEpil™ Safely
diuretics, sulfonyluraes, sulfonamides, DTIC, fluorouracil, vinblastine, griseofulvin, Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi Acids (BHAs), Retin-A®,
Accutane® and/or topical retinoids.
If you are currently or have recently been treated with Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi Acids (BHAs), Retin-A®, topical retinoids or
azelaic acid.
If you have abnormal skin conditions caused by diabetes, for example, or other systemic or metabolic diseases
If you have been treated with Accutane® (isotretinoin) within the past 6 months.
If you have been on a steroid regimen within the past 3 months.
If you have a history of herpes outbreaks in the area of treatment, unless you have consulted your physician and received preventative treatment
before using Silk’n SensEpil™.
If you suffer from epilepsy.
If you have an active implant, such as a pacemaker, incontinence device, insulin pump, etc.
If you have a disease related to photosensitivity, such as porphyria, polymorphic light eruption, solar urticaria, lupus, etc.
If you have a history of skin cancer or areas of potential skin malignancies.
If you have received radiation therapy or chemotherapy treatments within the past 3 months.
If you have any other condition which in your physician’s opinion would make it unsafe for you to be treated.
If you are unsure if Silk’n SensEpil™ is safe for you to use, please consult with your doctor or dermatologist.
8
As with any electrical device, certain precautions must be taken in order to ensure your safety when using Silk’n SensEpil™.
Keep Silk’n SensEpil™ away from water!
Silk’n SensEpil™ is an electrical device. As such it should always be kept away from water.
Do not place or store Silk’n SensEpil™ where it can fall or be pushed into a tub, sink or any other vessel containing water. Do not place in, or drop
into water or any other liquid.
This may cause severe electrocution.
Do not use Silk’n SensEpil™ while bathing.
Do not use Silk’n SensEpil™ if it becomes damp or wet.
Do not reach for Silk’n SensEpil™ if it has fallen into water.
Unplug Silk’n SensEpil™ immediately if it has fallen into water.
7. Reducing the risk of injury
Never open Silk’n SensEpil™!
Do not attempt to open or repair your Silk’n SensEpil™ device. Opening Silk’n SensEpil™ may expose you to dangerous electrical components
and to pulsed light energy, either of which may cause serious bodily damage and/or permanent eye injury.
Keep Silk’n SensEpil™ away from water!
Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing alcohol) or acetone to clean the skin
before using Silk’n SensEpil™.
Use of Silk’n SensEpil™ may cause temporary pigmentation changes (See “Possible Side Effects” below).
Keep this device out of the reach of children. Do not use Silk’n SensEpil™ on children or allow children to use it.
Trying to open Silk’n SensEpil™ may also damage the device and will void your warranty.
Please contact Silk’n SensEpil™ Customer Service if you have a broken or damaged device in need of repair.
Use Silk’n SensEpil™ only for its intended use and as described in its manual.
Silk’n SensEpil™ should never be left unattended when plugged into an outlet.ֿ
Do not operate Silk’n SensEpil™ if it has a damaged cord or plug and keep the power cord away from heated surfaces.
Do not use Silk’n SensEpil™ if you see or smell smoke when it is in use.
Do not use Silk’n SensEpil™ if it is not working properly or if it appears damaged.
Do not use Silk’n SensEpil™ if the fan vent in its APPLICATOR is cracked, coming off or missing.
Do not use Silk’n SensEpil™ if the SKIN COLOR SENSOR in its APPLICATOR is cracked, or broken.
Do not use Silk’n SensEpil™ if the outer shell is cracked or is coming apart.
Do not use Silk’n SensEpil™ with a damaged DISPOSABLE LAMP CARTRIDGE, or if its OPTICAL LENS is cracked, chipped or missing
Always unplug Silk’n SensEpil™ from the electrical outlet immediately after use.
Unplug Silk’n SensEpil™ before cleaning.
Do not use Silk’n SensEpil™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Do not attempt to open or repair your Silk’n SensEpil™ device. Only authorized Silk’n SensEpil™ repair centers
are permitted to perform repairs.
9
Minor Skin Discomfort
Although home pulsed light hair removal is generally very well-tolerated, most users do feel some mild discomfort during use, usually described as
being a mild stinging sensation on the treated skin areas. The stinging sensation usually lasts during the time of the application itself or for a few minutes
thereafter. Anything beyond this minor discomfort is abnormal and means that either you should not continue to use Silk’n SensEpil™ because you
are unable to tolerate the hair removal application, or that the energy level setting is too high.
Skin Redness
Your skin may become red right after using Silk’n SensEpil™ or within 24 hours of using Silk’n SensEpil™. Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3 days.
Increased Sensitivity of the Skin
The skin of the treated area is more sensitive so you may encounter dryness or flaking of the skin.
Skin Wounds and Burns
Very rarely, burns or wounds to the skin can occur following the application. The burn or wound can require a few weeks to heal and, extremely
rarely, may leave a noticeable permanent scar.
Scarring
Although very rare, permanent scarring may occur. Usually when scarring occurs, it is in the form of a flat and white lesion on the skin (hypotrophic).
However, it can be large and red (hypertrophic) or large and extend beyond the margins of the injury itself (keloid). Subsequent aesthetic treatments
may be required to improve the appearance of the scar.
Pigment Changes
Silk’n SensEpil™ targets the hair shaft, in particular the pigmented cells in the hair follicle and the hair follicle itself. Nevertheless there is risk of
temporary hyperpigmentation (increased pigment or brown discoloration) or hypopigmentation (whitening) to the surrounding skin. This risk of
changes in skin pigmentation is higher for people with darker skin tones.
Usually discoloration or changes to skin pigment are temporary and permanent hyperpigmentation or hypopigmentation rarely occur.
Excessive Redness and Swelling
In rare cases treated skin may become very red and swollen. This is more common in sensitive areas of the body. The redness and swelling should
subside within 2 to 7 days and should be treated with frequent applications of ice. Gentle cleansing is OK, but one should avoid exposure to sun.
Infection
Infection of the skin is exceedingly rare but is still a possible risk following a skin burn or wound caused by Silk’n SensEpil™.
Bruising
Very rarely, use of Silk’n SensEpil™ may cause blue-purple bruising that can last 5 to 10 days. As the bruising fades, there may be a rust-brown
discoloration of the skin (hyperpigmentation) that can be permanent.
8. Possible Side Effects using Silk’n SensEpil™
When used according to the instructions, side effects and complications associated with use of Silk’n SensEpil™ are uncommon. However every cosmetic
procedure, including those designed for home use, involves some degree of risk. Therefore it is important that you understand and accept the risks and
complications that can occur with pulsed light hair removal systems designed for home use.
Adverse Event Likelihood of the Adverse Event Adverse Effect Likelihood of the Adverse Effect
Stacking or Overlapping of multiple
pulses
on the same skin spot
Minor Minor Skin Discomfort Minor
Skin Redness Minor
Increased Sensitivity of the Skin Minor
Skin Wounds and Burns Rare
Scarring Rare
Pigment Changes Rare
Excessive Redness and Swelling Rare
Infection Negligible
Bruising Negligible
10
After Silk’n SensEpil™ Application
During Silk’n SensEpil™ pulse
9. Long Term Hair Removal the Silk’n SensEpil™ Way
Silk’n SensEpil™ is a personal light-based device for long-term hair removal. The
process of laser and light-based hair removal is well known and established.
It has been proven in clinical use around the world for over 15 years as a safe and
effective way to achieve long-term hair reduction
9.1. How does light remove hair?
Light-based hair removal is based on the theory of selective photothermolysis
in which optical energy is used to disable hair growth. In order to achieve
such thermal effect the hair shaft needs to selectively absorb light energy and
transform it into heat. This selectivity is achieved when optical energy that is
delivered to the tissue is mostly absorbed by hair shaft pigment, while the skin
and the surrounding tissue stays cool. Melanin is the pigment in the hair shaft
that is responsible for the absorption of the light, which generates the heat that
eventually disables hair growth. Therefore the more melanin present in the hair
(i.e. the darker the hair) the more light that can be absorbed and the more
effective light can be at removing hair.
9.2. How does the hair growth cycle impact light-based hair removal?
Every hair in our body goes through the three phases of the hair growth cycle:
Anagen, Catagen and Telogen. These phases have an important impact on how
the process of light-based hair removal works.
Anagen is the hair growth phase while Catagen and Telogen, both are resting phases.
The time it takes to complete a full hair growth cycle varies from person to
person and the location of the hair on the body, but is typically 18-24 months.
At any given moment the majority of the hair follicles in any skin area are in the
resting phases. These resting hairs cannot be affected by Silk’n SensEpil™.
However, hairs in the growing Anagen phase will respond to Silk’n™ SensEpil
applications. It is important to understand that it may take a full hair growth cycle
to realize complete hair removal results with Silk’n SensEpil™.
Before Silk’n SensEpil™ Application Anagen - Growth phase
Catagen - Resting phase
Telogen - Resting phase
18-24
Months
Anagen
Telogen Catagen
9.3. Plan your Silk’n SensEpil™ hair removal for best results
A typical full hair growth cycle may take 18-24 months. During this time multiple Silk’n™ SensEpil sessions may be required in order to achieve long term
hair removal.
The efficiency of hair removal varies from person to person according to body area, hair color, and how Silk’n™ SensEpil is used.
Typical Silk’n SensEpil™ hair removal plan during a full hair growth cycle:
The first 3-4 hair removal sessions with Silk’n SensEpil™ will be approximately two weeks apart.
Hair removal sessions 5-7 with Silk’n SensEpil™ will be approximately four weeks apart.
After that you will typically use Silk’n SensEpil™ again from time to time if and when needed, until long-term results are achieved.
11
This is the recommended treatment schedule that has proven to produce the best results, but you may plan your personal treatment schedule differently
and still get satisfactory results.
Note that treating the same body part more often than once in two weeks, will not improve hair removal results.
Typical maintenance with Silk’n SensEpil™ after achieving long-term hair removal:
Due to hormonal or other physiological changes dormant hair follicles may become active. Maintenance hair removal sessions with Silk’n SensEpil™ may be
required from time to time.
10. First steps with Silk’n SensEpil™
10.2. Treating with Silk’n™ SensEpil for the first time
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
5. Press the POWER ON/STANDBY SWITCH. The POWER ON INDICATOR LIGHT will turn on and a fan sound (similar to the sound of a hairdryer) will start.
6. Approximately 3.5 seconds after pressing the POWER ON/STANDBY SWITCH, the READY INDICATOR LIGHT will turn on and the device will beep. The device
sets itself to deliver the lowest energy level pulses. The device is then ready for you to trigger the first pulse.
7. If the energy level should be higher than the lowest, press the ENERGY LEVEL SETTING BUTTONS using the “-“ or “+” to respectively decrease or increase
the energy level, until the desired energy level is set. ENERGY LEVEL INDIC ATOR LIGHTS will coincide with the energy level setting. (See “Energy Level”
frame).
8. Apply the APPLICATOR firmly to the skin, making sure the skin is spread evenly and smoothly. Make sure the APPLICATOR TIP is in full contact with the skin.
9. Press the PULSE BUTTON. The device will first determine the color of your skin.
If the color of the skin is light enough for safe application, the device will flash a pulse of light onto your skin. You will see a bright flash of light and simultaneously
hear a subtle pop sound, which is a normal noise for the device. You may feel a mild sensation of warmth and tingling.
Silk’n SensEpil™ will immediately recharge for the next pulse. After 3.5 seconds the READY INDICATOR LIGHT will turn on again and the device will beep.
10. Remove the APPLICATOR TIP from the treated area of skin.
11. Move the APPLICATOR TIP to another area of skin.
Use the pressure marks the device just made on your skin to guide you for proper positioning of the next pulse, avoiding both gaps and overlaps between
pulses (See “Covering skin areas” frame).
12. Repeat the process star ting again with Step 5.
If you see no light pulse and the SKIN TONE WARNING INDICATOR LIGHT blink for 3 seconds, your skin tone, measured by the SKIN COLOR
SENSOR, is too dark for safe application. Try using the device on a different body part or contact the Silk’n SensEpil™ support (See: “The Skin
Color Sensor” frame)
Warning: Do not treat the same area of skin more than once per hair removal session! Treating the same area of skin more than once per
session increases the likelihood of adverse effects.
10.1. Silk’n SensEpil™ Setup
1. Remove Silk’n SensEpil™ BASE UNIT, APPLICATOR and other components from box.
2. Verify that the DISPOSABLE LAMP C ARTRIDGE is inserted correctly into the APPLICATOR.
3. Plug the power cord into the Silk’n SensEpil™ BASE UNIT socket.
4. Plug the other end of the power cord into an electrical outlet. The STAND BY INDICATOR LIGHT will turn on.
Your Silk’n SensEpil™ is now ready to start.
12
Energy Level
Energy level determines the intensity of the Silk’n SensEpil™ light pulse delivered to your skin, from the lowest level (-) to the highest level (+).
Corresponding INDICATOR LIGHTS on the CONTROL PANEL represent the increases in energy. As energy level increases, so does hair removal
results as well as the risk of possible side effects and complications.
Always start your first Silk’n SensEpil™ hair removal session at the lowest energy setting.
If you experience little or no discomfort during and after the hair removal session using the lowest energy level, raise the energy level by one
INDICATOR LIGHT at the next session, and so on for each subsequent session.
Whenever Silk’n SensEpil™ is turned on its energy level will automatically be reset to the lowest energy level. Only one ENERGY LEVEL INDICATOR
LIGHT will be on.
To set the energy level, press the ENERGY LEVEL SETTING BUTTONS using “-“ or “+” to respectively decrease or increase the energy level. The
number of ENERGY LEVEL INDICATOR LIGHTS will coincide with the change in energy level.
For your safety, when using Silk’n™ SensEpil for the very first time, the system is automatically set to deliver the first 50 pulses at the lowest energy
level, and the next 200 pulses at up to level 3.
To cancel these safety settings press and hold the “+” and ”-“ ENERGY LEVEL SETTING BUTTONS simultaneously until you hear 2 consecutive
“beep” sounds.
To restore these safety settings press and hold the “+” and ”-“ ENERGY LEVEL SETTING BUTTONS simultaneously until you hear 3 consecutive
“beep” sounds.
Do not raise the energy level if you experience abnormal discomfort during or after treating with Silk’n SensEpil™!
(See “Possible Side Effects”)
Do not raise the energy level during hair removal session even if you experience no discomfort. Discomfort may also appear
some time after the session.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
The Skin Color Sensor
Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and skin color changes (hyper- or hypo-pigmentation).
To prevent such misuse, a unique SKIN COLOR SENSOR in Silk’n SensEpil™ measures the treated skin complexion at the beginning of each session
and occasionally during the session. If the SKIN COLOR SENSOR detects a skin tone that is too dark for Silk’n SensEpil™ application, the device will
automatically stop emitting pulses.
If you see no light pulse and the SKIN TONE WARNING INDICATOR LIGHT blink for 3 seconds, this is an indication that your skin tone, measured by the
SKIN COLOR SENSOR, is too dark for safe application. Try using the device on a different body part or contact the Silk’n SensEpil™ support.
Covering skin areas
Silk’n SensEpil™ pulses should be administered in rows, starting at one end of each row and progressing sequentially
towards the other end. This technique allows better control of skin coverage, and helps you avoid treating the same area
more than once or overlapping skin areas.
When applied to the skin, the Silk’n SensEpil™ APPLICATOR TIP is designed to create temporary pressure marks on the
treated area. These visible marks can be used for proper positioning of the next pulse.
13
If your skin blisters or burns, STOP USE IMMEDIATELY!
10.3. What to Expect when treating with Silk’n SensEpil™?
For many people, using Silk’n SensEpil™ may be their first experience with a light-based device designed for home use. Silk’n SensEpil™ is simple to use, and
hair removal sessions go by quickly. During a Silk’n SensEpil™ session it is normal to experience and feel:
A Flash of Light – The bright light of Silk’n SensEpil™ will not harm the eyes when applied to non-facial sites, and special eye-protection is not needed
when using Silk’n SensEpil™.
A Fan Noise – The cooling fan in Silk’n SensEpil™ makes noise similar to a hairdryer. This is normal.
A Pop Sound with Each Pulse – When a pulse of HPL™ light is activated, it is normal to hear a subtle pop sound simultaneously with the flash of light.
Moderate Pressure of the APPLICATOR – This is necessary and helpful for placement of adjacent pulses of light, and is part of the unique safety feature
of Silk’n SensEpil™.
A Sensation of Warmth and Tingling – During each pulse of light it is normal to feel a mild sensation of warmth and tingling from the light energy.
Remember it is important to always use low energy settings for initial hair removal sessions. You may feel some warmth for up to an hour after your
Silk’n SensEpil™ session.
Some Mild Red or Pink Color – During and just after your Silk’n SensEpil™ session it is not uncommon to see some very mild, pink-like color of the skin.
This is usually most noticeable around the hairs themselves. However if you see full redness of the skin, blistering or burns stop use of Silk’n SensEpil™
immediately.
10.4. After treating with Silk’n SensEpil™
When Silk’n SensEpil™ session has been completed turn Silk’n SensEpil™ off by pressing the POWER ON/OFF SWITCH. (Be sure to remember the last
energy level setting you used, as it will not be restored when turning Silk’n SensEpil™ on again.)
Unplug the power cord from the electrical outlet.
After each hair removal session it is recommended that you clean your Silk’n™ SensEpil device, especially the APPLICATOR TIP (See: “Cleaning Silk’n
SensEpil™”).
After cleaning, it is recommended to store your Silk’n SensEpil™ device in its original box, and keep it away from water.
Skin care following hair removal session
Do not expose treated areas of skin to the sun. Be sure to carefully protect the treated skin with sunscreen, throughout
the hair removal period and for at least 2 weeks following the last Silk’n SensEpil™ session.
Side effects and complications
Some patients may experience pigmentation changes resulting from treating with Silk’n SensEpil™ . These effects, if they occur,
are generally mild and transient.
In case you experience any complication (See “Possible Side Effects using Silk’n SensEpil™”) please contact your physician
immediately.
14
11.2. Replacing the LAMP CARTRIDGE
The Silk’n SensEpil™ DISPOSABLE LAMP CARTRIDGE can fire 750 light pulses that would typically cover 2 Legs, Arms, Under arms, and Bikini line. Pulse
intensity is determined only according to the energy level setting of the device. There is no decrease of energy during the usable lifetime of the LAMP
CARTRIDGE.
When a DISPOSABLE LAMP CARTRIDGE has reached 90% of its possible lifetime the REPLACE CARTRIDGE INDICATOR LIGHT on the CONTROL PANEL will start
blinking, indicating that the DISPOSABLE LAMP CARTRIDGE should soon be replaced.
Once all 750 pulses in a DISPOSABLE LAMP CARTRIDGE have been used the REPLACE CARTRIDGE INDICATOR LIGHT will be steadily on, indicating that further
pulses can not be emitted.
In order to continue the hair removal session, it will now be necessary to replace the DISPOSABLE LAMP CARTRIDGE.
To replace a DISPOSABLE LAMP CARTRIDGE:
1. Press the POWER ON/OFF SWITCH to turn Silk’n SensEpil™ off.
2. Unplug the power cord from the electrical outlet.
3. Grasp the used DISPOSABLE LAMP C ARTRIDGE on both sides, pull it out of the socket and discard with
normal trash.
4. Unwrap a new DISPOSABLE LAMP CARTRIDGE.
5. Push the new DISPOSABLE LAMP C ARTRIDGE gently into place.
If correctly installed, the DISPOSABLE LAMP CARTRIDGE will spring back when pushed in and released.
11. Maintenance of Silk’n SensEpil™
12. Troubleshooting
11.1. Cleaning Silk’n™ SensEpil
After each hair removal session, it is recommended to clean your Silk’n SensEpil™ device, and especially the APPLICATOR TIP .
Unplug Silk’n SensEpil™ before cleaning.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment to gently wipe Silk’n SensEpil™ surface, and especially the
APPLICATOR TIP.
Never immerse Silk’n SensEpil™ or any of its parts in water!
Note: A DISPOSABLE LAMP CARTRIDGE should also be replaced if large spots appear inside it or if its LENS is broken.
12.1. “My Silk’n SensEpil™ does not start.”
Make sure the power cord is properly connected to the Silk’n SensEpil™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
15
12.2. “A light pulse is not emitted when I press the PULSE SWITCH”.
Make sure that you have good contact with the skin and that the APPLICATOR TIP is evenly and firmly pressed to the skin. For your safety, the PULSE BUTTON
will activate a pulse only if the APPLICATOR TIP is firmly pressed against the skin.
Check the CONTROL PANEL. If the SKIN TONE WARNING INDICATOR LIGHT blink for 3 seconds, this is an indication that your skin tone, measured by the
SKIN COLOR SENSOR, is too dark for safe application. Try using the device on a different body part or contact the Silk’n SensEpil™ support.
Check the REPLACE CARTRIDGE INDICATOR LIGHT. If it is on, disconnect Silk’n SensEpil™ and replace the DISPOSABLE LAMP CARTRIDGE.
Make sure that the READY INDICATOR is on.
If within 10 seconds the READY INDICATOR remains off turn
Silk’n SensEpil™
off and back on by pressing the POWER ON/OFF SWITCH twice.
If the problem persists, contact your local Silk’n SensEpil™ Customer Service Center.
Check the SYSTEM WARNING INDICATOR LIGHT.
If the light is on turn Silk’n SensEpil™ off and back on by pressing the POWER ON/OFF SWITCH twice.
If the problem persists, contact your local Silk’n SensEpil™ Customer Service Center.
If these problems persist, contact your local Silk’n SensEpil™ Customer Service Center.
Do not attempt to open or repair your Silk’n SensEpil™ device. Only authorized Silk’n SensEpil™ repair centers are
permitted to perform repairs.
Opening Silk’n SensEpil™ may expose you to dangerous electrical components and to pulsed light energy, either of which may cause serious bodily
damage and/or permanent eye injury.
Trying to open Silk’n SensEpil™ may also damage the device and will void your warranty.
Please contact Silk’n SensEpil™ Customer Service if you have a broken or damaged device in need or repair.
13. Customer Service
For more information about Silk’n SensEpil™ please enter www.silkn.com
If your Silk’n SensEpil™ is broken, damaged, in need of repair, or for any other Silk’n SensEpil™ user assistance, please contact
your local Silk’n SensEpil™ Customer Service: 1-877-DO-SILKN / 1-877-367-4556, contact@silkn.com
14. Frequently Asked Questions
1. Does Silk’n SensEpil™ really work?
Yes. In clinical trials held by physicians, Silk’n SensEpil™ was proven to safely achieve long-term hair removal results.
2. Where on my body can I use Silk’n SensEpil™?
The Silk’n SensEpil™ device has been designed for body hair removal anywhere below the neck. The most common areas treated with Silk’n SensEpil™ are:
legs, underarms, arms and bikini line. It is not recommended to use Silk’n SensEpil™ on the face. Silk’n SensEpil™ is not suitable for everyone. We recommend
that you read all the Silk’n SensEpil™ warnings and contraindications in this User’s Manual.
3. How long does a Silk’n™ SensEpil treatment session take?
The time can vary depending on the area of the body treated. A full leg can take up to 30 minutes, or two underarms could take 10 minutes. Because Silk’n
16
SensEpil™ runs on regular electric power it can be used for as long as needed to complete a full hair removal session of the desired body part(s).
4. Is Silk’n SensEpil™ safe?
Silk’n SensEpil™ has been designed with your safety in mind, and tested and approved by top dermatologists and plastic surgeons to meet their safety
standards for a home-use device. But like any skin product or electronic device, one must use according to the operating instructions and user precautions.
5. Will Silk’n SensEpil™ hurt?
When used properly most users of Silk’n SensEpil™ report feeling a slight sensation of heat at the time of the pulse of light. Users with thicker and darker
hairs may feel slightly more discomfort, but this discomfort subsides once the hair removal session is completed. For your convenience Silk’n SensEpil™ has
five setting levels that can be used according to your sensitivity.
6. How often should I use Silk’n™ SensEpil™?
Hair removal sessions with Silk’n SensEpil™ should be spaced every two weeks for the first three to four sessions. After that hair removal sessions should be
done if hairs have grown back, until the desired results are achieved.
7. Is Silk’n SensEpil™ effective on white, grey or blonde hairs?
Silk’n SensEpil™ works best on darker hair types, or hair that contains more melanin. Melanin is the pigment that gives hair and skin their color, and will
absorb light energy. Black and dark brown respond the best, although brown and light brown hairs will also respond but typically require more hair removal
sessions. Red may show some response. White, grey or blonde hairs usually don’t respond to Silk’n SensEpil™ though some users have noted results after
multiple hair removal sessions.
8. Can I use Silk’n SensEpil™ on brown or black skin?
Do not try to use Silk’n SensEpil™ on naturally dark skin complexion! It will not operate!
Silk’n SensEpil™ is a light-based hair removal device, which removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment also
exist in the surrounding tissue of skin. The quantity of pigment in a particular person’s skin, which is manifested by their skin complexion, determines the
degree of risk they are exposed to using Silk’n SensEpil™. Treating dark skin with light based hair removal systems can result in adverse effects such as burns,
blisters, and skin color changes (hyper- or hypo-pigmentation). A unique SKIN COLOR SENSOR is embedded in Silk’n SensEpil™ to measure the treated
skin complexion at the beginning of each session and occasionally during the session. When detecting use on darker skin tones, the SKIN COLOR SENSOR
disables Silk’n SensEpil™ from further emitting of pulses.
9. When will I see results from Silk’n SensEpil™?
As with any light-based or laser hair removal device, results are not immediate, and in fact you may not think anything happened at all. Hair may sometimes
appear to be growing back after a hair removal session, but typically after two weeks many of these hairs will simply fall out. Additionally hairs grow in three
different stages and only hairs in an active growth stage will be affected by Silk’n SensEpil™. This is one of the main reasons that multiple sessions are required
to achieve the desired result.
10. Can a man use Silk’n SensEpil™?
Though designed exclusively for women, Silk’n SensEpil™ may be suitable for use by men. However, hairs on men, typically those on the chest, will require
more hair removal sessions than that of women to get the desired results. As with women, using Silk’n SensEpil™ on men’s facial hair such as beard and
mustache, is not recommended.
11. Why is my hair growing, even though I treated it a week ago?
It is quite common for hair to appear as if it is still growing up to two weeks after a hair removal session with
Silk’n SensEpil™
. This process is known as “ejection”
and at around two-weeks you’ll see that these hairs simply fall out or slide out with a slight tug. (We don’t however recommend pulling on the hairs – just let
them come out naturally.) It is also possible that some hairs, due to missed application or different stages of growth, were not affected by
Silk’n SensEpil™
. These
hairs will be treated in follow-up sessions, and hence the reason multiple hair removal sessions are needed to get the best result with
Silk’n SensEpil™
.
12. I’ve heard that some hairs grow back lighter and finer after light based hair removal?
This phenomenon is well documented amongst aestheticians and doctors using light and laser devices for hair removal. It is possible that some hairs will
grow back lighter and finer after hair removal with Silk’n SensEpil™. Usually these hairs are a fraction of what was originally there, and continued use may
have a desirable effect on them.
13. Why can’t I treat myself if I have an “active” suntan?
17
15. Specifications
Specs, Spot Size 2cm x 3cm [6cm2]
Speed 1 pulse every 3.5 second: 1.7 cm2/sec
Technology Home Pulsed Light™
Max Energy Level Max 5J/cm2
Wavelength 475-1200nm
Charging Time/Power Source Continuous operation
Electrical Requirements 100-240VAC, 2A
Time Needed to Treat Lower Legs 30 minutes
Operation and Safety New Skin Color Sensor ensures use only on suitable skin complexions.
Safety sensor tip enables maximum safety & control. Easy to use.
Package Size 22cm x 22cm x 13cm
Package Size 22cm x 22cm x 13cm
Do not use Silk’n SensEpil™ on tanned skin or after sun exposure! Tanned skin and particularly following sun exposure, contains large quantities of the
pigment Melanin.
This applies to all skin types and complexions, including those which don’t seem to tan quickly. The presence of large quantities of Melanin exposes the skin to
higher risk of adverse effects when using Silk’n SensEpil™ including burns, blisters, and skin color changes (hyper- or hypo-pigmentation).
14. Is long-term use of Silk’n SensEpil™ dangerous for my skin?
The use of light and laser energy in aesthetic medicine has been well documented for over 15 years in professional peer-reviewed journals, and by well
respected institutions like the Mayo Clinic. These journals and institutions have not reported any side-effects or damage from long-term use of light and
laser device.
15. Can I use Silk’n SensEpil™ to remove my chin hair or elsewhere on my face?
Do not use Silk’n SensEpil™ on the face or neck. Unlike body hair, most of women’s potential facial hair remains inactive and hidden, while only a fraction of
it grows and surfaces. Exposing facial hair to the light pulses of Silk’n SensEpil™ may remove apparent hair but simultaneously stimulate unwanted growth of
hidden hair. In addition, using Silk’n SensEpil™ to remove facial hair may cause serious eye injury.
16. How long should I wait to treat with Silk’n SensEpil™ after unprotected exposure to the sun?
One should wait 4 weeks before using Silk’n SensEpil™ after unprotected exposure to the sun. However, if there is ever any uncertainty about sun exposure
please contact your physician or Home Skinovations customer support.
17. Should I do anything before using Silk’n SensEpil™?
Before any Silk’n SensEpil™ session it is important to avoid sun exposure on the treated area for at least four weeks. A high level UV Sun Screen (SPF 50+)
will help, as will clothing covering the treated area. The area to be treated should also be cleaned with mild soap and water, and the hairs shaved down to
skin level.
18. How should I care for the treatment area after using Silk’n SensEpil™?
The area treated with Silk’n SensEpil™ can be cleaned and maintained with standard skin care products. Special care must be taken to avoid unprotected
sun exposure.
Strong sunscreens (50+ SPF) and covering clothing are suitable for protection from the sun.
19. Should I pull the hairs out after treatment?
No, let the hairs gradually fall out on their own. This may take up to 2 weeks.
18
16. Labeling
Class II equipment
Degree of protection against electric shock: type BF applied part
WEEE - Waste Electrical and Electronic Equipment
CE Mark
Follow operating instructions
This device comply with Part 15 of the (FCC) Federal Communications Commission Rules.
CSA Mark for USA and Canada.
Degree of protection against ingress water: ordinary
This device is not suitable for use in the presence of flammable anesthetic mixture
with air or with Oxygen or Nitrous Oxide.
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, these is no
guarantee that interference will not occur in particular installation. If
this equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equiepment and receiver.
c) Consult the dealer or an experienced radio/TV technician.
FCC Warning
Modifications not expressly approved by the manufacturer could
void the user authority to operate the equipment under FCC Rules.
19
Apolo Building, Shaar Yokneam POB 533, Yokneam 20692, ISRAEL www.silkn.com
tel. +972-4-9097470, fax +972-4-9097471, info@silkn.com, contact@silkn.com
Manufacturer: Home Skinovations Ltd. Apolo Building, Shaar Yokneam, POB 533, Yokneam 20692, ISRAEL
Tel: +972-4-9097470 | Fax: +972-4-9097471
Dr. Amir Waldman
VP Regulatory & Clinical Affairs
Yokneam, February 4, 2008
Gabi Lavi
General Manager
Yokneam, February 4, 2008
Authorized Representative: Home Skinovations GMBH Dr. Kurt Huber Str.6, D-82031 Grunwald, GERMANY
Tel: +49-89-64919530 | Fax: +49-89-64919531
EC Declaration of Conformity
We Home Skinovations Ltd. declare under our sole responsibility that the home Skin treatment products
Brand name: Home Skinovations
Model name: SensEpil; Disposable Lamp Cartridge
Models Number: AS101028A
are fully in conformity with the essential requirements of Council Directive 89/336/EEC and 73/23/EEC amended by Directives
93/68/EEC.
This declaration is based on the full compliance of the products with the following European standards:
EN 61000-3-2:2000; (A2:2005)
EN 61000-3-3:1995; (A1:2001)
EN 55014-1:2000; (A2:2002)
EN55014-2:1997; (A1:2001)
EN 301489-1:(2004)
EN 301489-3:(2002)
EN 60335-1:2002; (A1:2004; A12:2006)
EN 50415:2003
Electrical Safety:
EMC:
RF:EN 300330-1:(2002-12)
EN 300330-3:(2006-04)
20
Silk’n SensEpil™ Setup
1. Remove Silk’n SensEpil™ BASE UNIT, APPLICATOR and other components from box.
2. Verify that the DISPOSABLE LAMP CARTRIDGE is inserted correctly into the APPLICATOR.
3. Plug the power cord into the Silk’n SensEpil™ BASE UNIT socket.
4. Plug the other end of the power cord into an electrical outlet. The STAND BY INDICATOR LIGHT will turn on.
Your Silk’n SensEpil™ is now ready to start.
Treating with Silk’n™ SensEpil for the first time
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
5. Press the POWER ON/STANDBY SWITCH. The POWER ON INDIC ATOR LIGHT will turn on and a fan sound (similar to the sound
of a hairdryer) will start.
6. Approximately 4 seconds after pressing the POWER ON/STANDBY SWITCH, the READY INDICATOR LIGHT will turn on and the
device will beep. The device sets itself to deliver the lowest energy level pulses. The device is then ready for
you to trigger the first pulse.
7. the energy level should be higher than the lowest, press the ENERGY LEVEL SETTING BUTTONS using the “-“ or “+” to
respectively decrease or increase the energy level, until the desired energy level is set. ENERGY LEVEL INDICATOR LIGHTS
will coincide with the energy level setting. (See “Energy Level” frame).
8. Apply the APPLICATOR firmly to the skin, making sure the skin is spread evenly and smoothly. Make sure the
APPLICATOR TIP is in full contact with the skin.
9. Press the PULSE BUTTON. The device will first determine the color of your skin. If the color of the skin is light
enough for safe application, the device will flash a pulse of light onto your skin. You will see a bright flash of
light and simultaneously hear a subtle pop sound, which is a normal noise for the device. You may feel a mild
sensation of warmth and tingling. Silk’n SensEpil™ will immediately recharge for the next pulse. After 3.5
seconds the READY INDICATOR LIGHT will turn on again and the device will beep.
10. Remove the APPLICATOR TIP from the treated area of skin.
11. Move the APPLICATOR TIP to another area of skin. Use the pressure marks the device just made on your skin
to guide you for proper positioning of the next pulse, avoiding both gaps and overlaps between pulses (See
“Covering skin areas” frame).
12. Repeat the process starting again with Step 5.
Quick Start