Homer Technology T700 Robotic Vacuum Cleaner User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4064352
Application ID	JE3eh+RW+8od82ZjkzzXBQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	435.8kB (5447523 bits)
Date Submitted	2018-11-08 00:00:00
Date Available	2018-11-08 00:00:00
Creation Date	2018-11-08 15:33:34
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-11-08 15:33:34
Document Title	英文说明书-华橙
Document Creator	Adobe Illustrator CS6 (Windows)
Document Author:	USER

T700
Please read the instructions carefuly before using this product and keop it proporly
CONTENT
1.Safety ReUuIation$ +3 t t snn n n n n snn n n n ns n n n n en n 66 3
2.Product Composition ............................. 4
2.1Component Name ++ ns snn nsm n 6n n en en 6e n e en n en en e e e 4
2.2Technical PArAM@t@r sns s snn ns s sn n n ns en n n e ee en n e +# 7
3.Product Instructions ++ n snn nnn n sns n sn snn ++ ++# 8
3.1CONSIG@rAtiOh$ ++ n n ++ +8 n n 66e n n n n 6e en en e e e e en e e e en 6e 8
3.2Rapid Operation : +9
3.3Mode Selection +* 12
3.4Use of Water Permeable Rag +>>> 14
3.5Roller Brush Assembly and Sucking Assembly ++ ++ ++ ++ +++>> 15
3.6APP Download and Network Configuration +*++++***++***+* 16
3.7Reservation Setting ++ n n n n n n n n n en n n en en n n en n n n en n en 17
3.8Unbind DeViG® ++ +t tssn n n ns n n n n en n n en n n en n n e en n e e kn 17
A.M@INt@N@NG@ +o snn n n n n n n n n n n n n n n n n kn n n n e n k n k n k +k 18
4.1Dust Box and Filter +ss ++ ns ns +8 n n n n xn n n n n e en en n e e 18
4.2Water Tank Assembly ++ ++ ++ *>> +19
4.3Rolling Brush, Suction and Side Brushes «++ ++ ++ ++ ++ ++ ++* 20
4.AOther ASS@Mbly snn n n 666666 en e en n 6e en en e e en n e e e 21
5.Light Effect And Alarm Tips +t t snn ns n n snn n n 9nn > 22
5.1Light Effet snn snn n n n en en n 6e en n en n n nn en n n nn en en n n 22
5.2A1@M TID8 +o n n n n snn n n n n 6n n n 6n n n n en n n n en n n n n en en n 22
G.FAQ ............................................ 24
1.Safety Regulations
When using the product, please keep your vigilance and follow below information
Please read the manual carefully before using the product. Please keep instruction
1) Prodvets cannat be us by chldran undar B yoarsot ag o peocto with manta isabitis.!f you ned t use t, tease do s under
tne superiston o t suarian. Prease do not o chlira ide on theprodct or pla the prout as a toy.
2) Potiems that mayais in cisaring products shoutd be aiminated as earty as possle.Clon e poner cardsand smal tems on te
floor to pavantth product rom being blocked urig e ceaning process. old te edge o he caretto the underide of the caet,
and keopthe hanging curtin, tibledoths, te from touching the srund
3 1 there is a suspendad envranmnt suchas a starcase,totthe productfrstto sae i t can datect theadg of the suspendad area
withoutflingProtctve bariars should be intaled attheadgeof thesuspendad arento proventfallng procuets. Make sirethat ho
rtectv eauibment dans not couse persona uy
4) Poasefotow the manuin th nstractons t use the product Use onl accessores recommended or ald by the manitactirr
5) Ensire that tha power suonlyvatage mests the vatage indleated on the crace
) Used onl in indeor home anronments. Do not use in outdoor, comme
ot ndustal ocatons
7) Use onl onl rechrgeatla batteias and charging dacks that ar nlque to tha manufactirerDo not se nan—recrargeatle
batteris.Fo batter specheations., lease rfe t "Tectnica Data®
8) Ensaretht dust bose and Atr matoril rnintaled bfore uaing mrocucts
) Use t ha product in an envranment wh on fames o ragie toms i prohibted
10) 0o no use the product n extame heat(above 40 °C) o vey old tblow =5" C)
11) 1 sforiddanto lose the bady‘s hi lothes, ingersand othr prt lose to the apening and averating parts of ha product
12) 0o not use th product n a room whera infons io
19) 00 no use th product on wot or vatoy ground
14) 1 s foriddan to bsord any tems such as stores, waste paper and any ther products that may lock theproduct
15) 0o n alow the wodsct t abserb any fammabla matarilssuch as oner,toner o tanerfor pivters or conies. Do not is the
product in a lean aroa with farmmabia materls.
18) 00 no ake any productthat i brrig, sueh asciurtto, matchos, ash,or thertems that may cause a fro
17) 00 no slacn toms atthasuctvion outat Do nut use products vhan sucon is ackad. Cloan ds otton wool hi. te. at the
suction por to ensire smooth i creuirionat the weion port
18) Use h pover cord cafily to avld darage Do not se the pover cod o rag or pul t prodic and the roduct chargng stans
Do not use tha pover cord as a handa. Do not lama tha pover cord nt he daor seam. Do nat ul the power cord t sharp comers
and comers Do not operatetha product on the ponar In, and the powar card should be tept aay rom neat
19 1t tha pover cor is damage. it must e rolaced by a mandtactirn,a professona in it maintnance dacarmant o a smiar
departmentto avid danger
20) Do not use the damaged cvarging stand
21) Do not use thaproduct wina damaged power ord or pover utlt. Do not use tha product when it is not working proparly cue to
deapoing,damage, cutdoor use or wator ingross To aval Inuy, theprodac should brepred by ha mancfactir o s atr—slossovice
22) Torm of the roguct suith befor leaning and maintning tho product
23) Te plua must be unoluaged rom the pover otatbefor leaning and malntaning the product
24) Betoregiscard of the moduct, remove the productrom tha charge stand um off th product powr swtch and removeth battay
25) Te aroduct battory mt b remaved and ciscardd n accordance with leca ars and reguiaions betarediposing of the product
28) lease apose o used battoras i accordance with loallavs and egulatons
27) Even if h produc has beon amveralcamage. t is oriddon tonclnoato theproduct,and the rodhct battry may causean oxplosion
28 t you o nat use theproductfo a long tme, lease tum off t procuct
20 loaefolow o intatons n th mand to us ie product The cormpany i not esconsbls fo anlss o danage cavmed by inropor uoo
2.Product Compositio
2.1Assembly Name
> Master
Key (Start or Pause) Wih Indicator Light
afZ
Lower Vision Sensor
Unversial Wheel #Ctne Charging Pole Piece
Left Brushes
Right Brushes
Battery Cover
Drive Wheels Roller Brush Assembly
Dust Box/Water Tank /
® / _ (—— Suction Assembly
Dust Box / Water Tank Infrared buffer bumper
Switch
2.Product Compositio
> Charging Stand Assembly
Cleaning Tools
Indicator Light
‘—— Power Adapter
Charging Pole Piece
Power Adapter Slots
> Remote Control
Power Key ———|— | C 6 ) ————— Return to Charge Key
Direction Key < 0. Pil——» Start/Pause
|. 1 Fixed—Point Cleaning
Edge Mode Key O O Mode Key
POWER Key ————— rows ($ ) —|———— Water Control Key
2.Product Compositi
> Dust Box
Primary Filter
Efficient Bracket Lower Cover
Filter Sponge
High Effciency Filter (HEPA)
Efficient Bracket
Upper Cover
Dust Box Upper Cover Dust Box Lower Cover
Dustbin Key
> Water Permeable Rag Assembly
Water Tank Dustbin Key
Water Tank
Sealing Plug
Water Rag
2.Product Compositio
2.2Technical Parameters
Master Model: T700
Working Voltage: 14.52 V === Power Rating: 25
Charging Stand
Rated Input Voltage: 19 V === Rated output current: 0.6
Battery and Specifications Lithium Battery 2600mAh
Adapter Model
Chinese: GSCCOOOSO19V12E / US: GSCUOSODSO19V12E / UK: GSCBOs0OSO19V12E
In put: 100—240 V—0.5A Max 50/60Hz Out Put: 19 V ==
roduct Compositio
3.1Considerations
Please refer to the following guidelines to check the cleaning area before
the main engine works.
Power lines and other debris scattered on the Please roll the carpet tassels or work on
ground may trip up.Product must be removed short—hair rugs
A gap of less than 8 em on the bottom of the A guardrall should be placed at the edgo of the
furniture may catch the product f you need to duplex to ensure safe operation of the product
clean it, please raise the furniture.
3.Product Compositi
3.2Rapid Operation
Charging Preparation
Connect the adapter to the charging stand
Place the charging stand flat against the wall. Do not place objects in the left and right 1M and the front 2M,
and do not have objects with strong reflection surfaces such as mirrors
Place the charging stand Connect the power supply
Install The Side Brushes
Please install the right brush into the right bottom mounting port of the machine, the left brush into the left
battom mounting port of the machine, and ensure that the two side brushes are in place
Rlght Brushes LeftBrushes
3.Product Composition
Start to charge
EJ Turn On The Master
Tum on the side power switch, "" is te turn on, "0" is the tum off.
After the master finishes working, it is recommended not to shut down; keap the master in a state of charge
so that it can perform its next job bettor.
Master Charge
Place the master in the charging stand and pay attention to the charging pole piece
The key blue light flashes, charging
The blue light of the key is always on and charging is completed
For the firs time, please charge continuously for more than 12 hours
10
3.Product Composition
Start Cleaning
Start the planning and cleaning mode with the master‘s
key or remote control © key
Before starting the mode, make sure that the outer ring of the (G) key is red/blue and the master is in the
state of being awakened. if the master does not wake up, short press the master
r remote control @
key to wake it up.
The master enters the sleep state after 10 minutes of standby, and the (©) key light is off.
If you need to select another mode, please refer to the (Mode Selection) section.
boauce
While the master is working, press the master
key or remote control and the master will pause.
3.Product Composition
3.3Mode Selection
In order to adapt to different ground conditions and achieve deep cleaning, this product has a variety of
cleaning modes, which can be selected by remote control as needed
The remote control can switch any mode directly
Before starting the mode, make sure that the outer ring of the (G) key is red/blue and the master is in
the state of being awakened.If the master does not wake up, short press the master
control © key to wake it up.
it ecaosecs
it is sutabla for the ground environment whore the
gerbage is concentrated. The master centralized
cleaning in the designated area, and master centralzed
ctoaning with the "spira" route. Aftr the diametor
is Im, the machina retums to the orignal point. f the
obstacle is encountered in the midelo, the sptral is
cleaned for 2 minutes
it is sultable for cloaning at the comers of tho
room. The master is cleaned around the periphory
of a fired object (such as a wal) and cleaned back
to the charging stand
Return Charging Mode
it ean also be commanded by t button on the remote
eontrel tostat the "returm charging" mode During the
cleaning process, the master can sense that ts oun
powar is nsufflont, and automatialy start
the ‘retum charging" mode, and automaticaly ind the
charging stand for charging
12
3.Product Composition
POWER MODI |
The power of the mastor can be commanded by
ths POWER button on tns remots contot The alze :®: Small  Medium  High
of the masteris smal, medium and high. The buzzer 3 nass  dase sunk
of the master prompts 1 sound, 2 sounds and
3 sounds respectvely. '\\
—
Ecesc ced Ccs
‘The water drop button on the remote contral can . Small  Medi
be used to command the crip size of the water (P% plialbenl
tark in the mapping mode, sub—small mid—range, a @ Nes  fene
high—grade, and the main buzzer prompts 1 sound
2 sounds, 3 sounds respoctivoly
13
3.Product Composition
3.4Use of Water Permeable Rag
This productis eauioned wih a watertark assemly. After the cloaning work is complated, f here is a
ddomand for mapping, the dust box can be replaced with a water tank assembly. Forthe cloaning
method, please refer to t (Maintenance} section in this manual
Do not use the water tank assembly on the carpet. When cleaning with the rag function, fold the edge
ot the carpet to avad foreign matter on the ra from soling the carpet.
In the claning, pleaso pay attention, add water or clean up in time,remove the water storage box when ading water
When charging, bo sureto remove the water permeable wipor assombly.
M Add Water M Sticking The Water Rag
Open the water inlet cover and take enough water Close the water inlet cover and stick the water rag.
M Install Water Tank Assembly m Mop
Press the dust box release button at the rear of
the master to remove the dust box and replace
the water tank assembly.
Start any cleaning mode as needed, and the master
will perform cleaning and mopping
14
3.Product Compositio
3.5Roller Brush Assembly and Sucking Assembly
Assembly Choices
it comes with roller brush assembly and sucking assembly to satisty different needs.
Roller brush assembly: Sucking assembly:
Seratch the foor, sweep and suck dust effectivaly used for daily claning, specialy for hair and pot hair
Set sucking parts: take Aout roller brush cover board and brush first, and change
suction cover board and then press to lock.
Set roller brush assembly: take out sucking assembly first, set the roller brush and
cover the board and then press to lock.
3.Product Composition
3.6APP Download and Network Configuration
This product can be remotely controlled via the moblle phone APP. Please fallw the instructions below or
refer to the product guide in the APP interface.
1.Download/Instalation
Please sean GR Code as por product modeldownload and install APP:
This app is for i099.0 and Android4.0 and above. If the phone version is
too low, please upgrade fist
2 Network Contguration And Usage
You can use thefolowing operating nstructions or mable app inteface to guide the network and use the product
m Wi—Fi Mode
Please ensure you are in a room with strong Wi—Fi signal, sign up and login App.
Turn on the robotl vaesum cleanor ... Keap prossing the AUVTO con and bumpor The indiator fashes whon
tor 3 seconds untla sound comes out the cleanor is searching WFi
B Open APP and choose to add device like below images
srep
Open App and add device Enter WE password paiing After t ditrbution natwork, eter
according t current WE the main inteface
Notice: If t flls to connect the Wi—Fi, please tum on the device again and folow steps to connect Wi—Fi
16
3.Product Composition
3. 7Reservation Setting
For more canvenience, there is a preset function. Use the APP to cantrol the device. When you. presot
swesessful, the cleaner can be programmed to automaticaly start cleaning at spocifed times of the day.
8 different proset tmes are available
Before setting the reservation time, make sure that the master button
is red/blue and the master is awake.
If the master does not wake up, press the master () or remote contral ©) button to wake it up
Setting Resversation Time Setting Reversation Time Cance! Reserved settngs
for one time or repoat Under the "Reserved" item
delete the reversation time.
3.8Unbind Device
Unbind device via App
1.Login App
2n device list, press the device you wanna unbind and
slide left can come out choices
3.Click Unbind to unbind the device and user
17
Maintance
4.1Dust Box and Filter
When cleaning and maintaining the master and its accessories, turn off the master
and unplug the charging stand.
M Remove the dust box, open the dust box cover, and clean the garbage;
STEP
01
M Remove dust filter. HEPA is not recommended for washing. Please pat
and remove ash.
M Flush the dust box and M Dry the dust box and dust filter
the primary filter; assembly and keep it dry to
ensure its service life.
4.2Water Tank Assembly
Cleaning Of Water Rag
M Remove: After the mopping is completed, remove the water tank assembly and
remove the water permeable rag.
M Cleaning The Water Reservoir
Remove: After mopping the foor, remove the Maintenance: Dry the resorvair and allow it t dry.
water tark assembly, remove the water permeable
eloth, and pour off the remaining water in the
water resorvoi
Maintance
4.3Rolling Brush, Suction Port, Side Brushes
M Cleaning Rolling Brush
Remove the rolling brush cover plate, remove the rolling brush, cut off the hair
wound on the rolling brush, and facilitate cleaning.
M Cleaning Suction Port
If there is more dust on the suction port, please use a rag to clean it.
M Cleaning Side Brushes
Pull out the side brush and wipe it with a clean rag.
STEP
03
20
4.40ther Assembly
M Clean the universal wheel to M Clear down the sensor to ensure
reduce hair entanglem. the sensitivity of the sensor.
M To clean the charging pole pieces, use a dry rag to clean the charging poles on
the bottom of the master or the charging stand
Do not use this product for a long time, please remove the battery and keep it n a safe place. f the
battery leaks, remove the battery and wipe the battery compartment clean
This product uses a high—life battery and does not require frequent replacement. if you need to
replace, you can contact our company for after—sales service replacement.
21
5.Lighting Effects And Alarm Tips
5.1Lighting Effects
Red light/pink light/
Charging bive ght breathing
As per current networking status
Finished Charging Blue light is always on As per current networking status
When the machine fails Red light flashes or lghts up As per current networking status
Low Battery Red light is always on As per current networking status
Cleaning Mode Blue light is always on As per current networking status
Before startng cistribution network Blue light is always on Blue light flshes
Eit the distrbution network after 5
minutes, the blue ight is off
Distrbution process/
Loss of signal reconnection
Blue ight is always on
Connect to Wi—Fi Blue light is always on Blue light is always on
5.2Alarm Tips
When the host fils, the red light of the outer ring of the host key flashes, and the buzzer sounds of
different lengths will be emitted. Refer to the following table to check the cause of the fault
Red light is always on :
; _ | oriving wheal | 3 tmes | . , "The cive whoel is abnormal, . | Check if the dive whoalis onta
abnormal _ |in 1 sound please exclude foreign matr _ | ngled and clean the side brush
Side brushes . | 3 tmes "The side brush is abnormal, .. | Checkcifthe side brush is ontan
2 abnormal . In2sowasl . 2 please clear the winding oled and clan the side brush
3 tmes "The fon is abnormal. Plase .. |. Clean up the garbage and air
8 Fan anome | Ingsoun . 9 exclude the abnormalty. duets in the dust box
Roling brush . | 3 tmes Rolling brush is abnormal, ... |Checcifthe roler brush is entan
4 abnormal .. Inasoures| * please exlude exception ied and clean the roler brush
— Ne dust box or wator n is Please chack the dust box or
s | DusiBo¥Rnk [ SJMES,) 5| derected ploase putitin the cust . | . water tank and putitin e
on abnomalin 5 so box or watertank dist box or water tank
s 3 tmes | . ; Al—round induction falure, . |Please clean the omnidrectional
induction fallure n  seuncs pleaso exclude abnormalttes lens
, _ |induetive farlure | 3 tmas | . | Wal faiure induction, pease Please chack the wall and
along the wall In7sows remove exceptions clean the omnidirectionallens
22
5.Lighting Effects And Alarm Tips
Red Light Flashes:
Colision
Over 205
3 tmes
In 1 sound
The collsion swtch is abnormal.
Prease exiude the abnormalty
Checici the infared ant—colision
sensor s tuck with forign matlr
Ground
Penetrating
3 tmes
In2 sns
"The master is suspended,
please move to the ground
"The master is suspended,
please move to the ground
3 Get out o
Trouble
3 times
ind sounds
Faled to get out of trouble,
pieaso move to the opon space
Faled to get out of trouble,
pieaso move to the opon space
a Low battory
3 tims
in sounds
"The batter is too low,
piease charge
‘The master vatage is too low and
needs manual assistance to charge
If the above method does not solve the problem, please try the following:
Re—open the power switch on the side of the master and restart the
machine.
23
Ag.(6]
If the following problems occur during the use of the product, you can
solve it yourself by checking the queries.
Solution
Make surethatthe mastar is uly docked
with the charging poles of t cradie
\when the master daes not wor, i is
recemmended to keep it in enargo so
that t can cary out the next work btter
The, master willty various ways to got
1id of iffesiesit you are not ale to get out of
troubl,itis recommended to help manvaly
Charge the master
"The working time of he master varies
degending on t compleaty of the room,
the amount of garbage and the ceaning mode
Turn on the power svitch of the master,
recommaetthe natwork and use the
APP t determina t resarvation information
When the master is n standby, it shoud
be keot on the charaig stand to ensure
that t has suffcient ower to work at any time
Turm off the power and clan the dust box
wih the bottom of the master fcing up
Cloan each part separataly.
Replsce the battey wih a new one and instl i properiy
Make sure the master power stch is tumed on
and has suffient power to completethe operation
Wipe th intared emiter ofthe remoto
Gontral and tha intared recaver of
the master with a cloan catto cloth
Aveid using the remoto control neor
other inttared devies.
No _ |Gause of Falure Probable Reasons
Th master is not i ul contact with
q. |taster canne [the sharging pole of the charging stend
t be charged |.‘me chargin stand power is tumed
aft and the main power swten is
furmed on resulting in powerloss
The master is | The master is entangled or obstructed
02| in rouble when |.— by scatered wres on the cround,
workina Grape curtains or caet edges
When the master is wrking,it can
After the lean | _ Sense thattho battoy is ow and
lng io corint |__ actomatialy retums to charging
03| a. thehost
roums to Wooden floor, ho and other fat
Gadgng around mastér spaed and tme
irence
The mastr pawee menan i ror
lundd on ahd te moster a n
Te master theaf stt dew bo mamrnion
ddret Informatan on t mavtr se
octomaticaly
oa clean "The master is ow on batters
sccording to
(o anpoiniment
‘ime Te master is clagged and
tangled by garbage
"The remote contrl is ow on battey.
LIRRTSSN | — Master pover switehis not tumed
on ar master is not enough power
ot oer
the remot
os | CAIETAE | menmtamdemsioetrermos
h contolo the master recover is drty
an affecho —|. and carrot ranomi or recove sgnas
contrl range
of 5 meter) Trore is a dance nortwrance
signa that gonertes intored
rays naar tro mastor
* omt ip: 20tepre073
* The images are only for reference, please make the object as the standard. Lohas reserves the right to
update products without prior notice.
24
CC ID:2ARHE—T700
Fcc warNine
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
~— Reorient or relocate the receiving antenna
=~ Increase the separation between the equipment and recsiver.
~— Connect the equipment into an outlet on a circult different
from that to which the receiver is connected.
=— Consult the dealer or an experienced radio/ TV technician for help.
To maintain compliance with FOC‘s RF Exposure guidelines, This equipment should be
installed and operated with minimum 20cm distance between the radiator your body: Use
only the supplied antenna.
2s
hazardous components and contents in products
Items e
Electronic ciroutt x 0 o o o o
Switch x o o o o o
Power adapter x o o o o o
Magnetic strip o o o o o o
Battery assombly o o o o o o
Dust sucton motor assembly x o o o o o
Side bush motor assenbly o o o o 0 o
Side whaet motor assembly o o o o o o
Remote control modute o 0 o o o o
Filter component 0 0 0 0 0 0
Side brush component o 0 o o o o
Universal wheel assembly 0 0 0 0 0 0
Dust calectng box assembly o o o o o o
Main components o o o o o o
Decorative cover assembly 0 0 0 0 0 0
Recharging docking station | _ 0 o o o o o
Roller brush assembly o o o o o o
Rollr brush cover assemly 0 0 o o o o
Water Tank assembly o 0 o o o o
Sucking assembly o o o o o o
Remarks:
1.The table is compiled according to the provisions of SJ/T 11964
2.0 means the harmful components contents is below the Imit requirements set by GB/T26S72 (EECo2321)
3.X means the harmful components contents exceed the imit requirements set by GB/T26572
4All components of X in this table conform to the EU ROHS rules
The environmental protection periad of the digita
identifation product in normal use is 10 years
CERTIFICATE
Execution standard number masone
GB4706.1—2005 GB4706.7—2014 beee
GB4343.1—2009 GB17625.1—2012
2s


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : USER
Create Date                     : 2018:11:08 15:33:34+08:00
Modify Date                     : 2018:11:08 15:33:34+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : 英文说明书-华橙
Creator                         : USER
Metadata Date                   : 2018:10:18 19:43:07+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 48
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6559 bytes, use -b option to extract)
Instance ID                     : uuid:3d2aacdf-74c4-4c44-afab-ce1f0da7819d
Document ID                     : xmp.did:D0E63284B6D2E811A5C88768B6FF3F5E
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:38f483b5-c522-4ae4-8c5a-0177e92a727f
Derived From Document ID        : xmp.did:1242BA1FB0BBE811A7A4BD5761210803
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:1242BA1FB0BBE811A7A4BD5761210803, xmp.iid:D0E63284B6D2E811A5C88768B6FF3F5E
History When                    : 2018:09:19 10:09:06+08:00, 2018:10:18 19:42:36+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\Administrator\Desktop\APP英文界面\7.png, C:\Users\Administrator\Desktop\说明书\扫地机APP界面截图\TIM图片20180928161956.jpg, C:\Users\Administrator\Desktop\APP英文界面\6.png, C:\Users\Administrator\Desktop\APP英文界面\5.png, C:\Users\Administrator\Desktop\APP英文界面\4.png, C:\Users\Administrator\Desktop\APP英文界面\3.png, C:\Users\Administrator\Desktop\说明书\扫地机APP界面截图\7.jpg, C:\Users\Administrator\Desktop\APP英文界面\2.png, C:\Users\Administrator\Desktop\说明书\扫地机APP界面截图\2.jpg, C:\Users\Administrator\Desktop\APP英文界面\1.png, C:\Users\Administrator\Desktop\说明书\扫地机APP界面截图\TIM图片20180928161949.png
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 148.000785
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 7546 C, Black : 56 0 -1
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 7546 C, C=93 M=88 Y=89 K=80, C=0 M=100 Y=100 K=0, C=41 M=33 Y=31 K=0, Black : 56 0 -1, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 0.000000, 0.000000, 40.833101, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 0.000000, 100.000000, 32.648200, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 0.000000, 100.000000, 30.954501, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 100.000000, 0.000000, 0.000000, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant L               : 21.960800, 21.961000
Swatch Colorant A               : -4, 0
Swatch Colorant B               : -12, 0
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 28

EXIF Metadata provided by EXIF.tools