Hon Hai Precision Industry B01 WLAN 802.11 b/g/n 1x1 AIOT Module User Manual Manual OEM Installation B01 01

Hon Hai Precision Industry Co., Ltd. WLAN 802.11 b/g/n 1x1 AIOT Module Manual OEM Installation B01 01

Contents

Manual OEM Installation B01-01

CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 1 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CPWB-B450JBKZ B01-01 IEEE 802.11 b/g/n 1x1 AIOT Module Product Specification 1.0 Approved: Approved: Prepared by: ________________________ _________________________ _________________________ Zeke Wu Matt Lin Ben Ho Manager Supervisor Engineer
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 2 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Revision History Date Number Approver Comments Dec. 18, 2016 1.0 Ben Ho Initial Draft Jan. 04, 2017 1.1 Ben Ho Adding information of Current consumption and Sensitivity Jan. 25, 2017 1.2 Ben Ho Adding information of Current consumption and Power consumption Mar. 31, 2017 1.3 Ben Ho Adding PCB layout, Placement, PCB specification, schematic, BOM, RF input and output characteristic Connector specification and reliability test item Oct. 26, 2017 1.4 Cathy Kuo Added FCC & IC Statement RESTRICTED AND CONFIDENTIAL INFORMATION STATEMENT
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 3 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved All information contained in this document is the exclusive property of Foxconn Technology Inc. and its development partners. Any reproduction or disclosure of all or part of this document without the expressed written consent of Foxconn Technology Inc. is strictly prohibited.
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 4 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved TABLE OF CONTENTS Revision History .................................................................................................. 2 Table of Contents ................................................................................................ 4 Chapter 1. Module Overview ............................................................................. 5 1-1 Key Characteristic ......................................................................................................................... 5 1-2 Pin Definition ................................................................................................................................ 5 1-3 PCB Specification .......................................................................................................................... 9 Chapter 2. Electrical and RF Specificaiton ........................................................ 14 2-1 Recommended Operation Rating ............................................................................................... 14 2-2 Digital IO Pin DC Characteristic ................................................................................................... 14 2-3 Analog Performance ................................................................................................................... 15 2-4 Power Consumption ................................................................................................................... 15 2-5 RF input and Output Characteristic ............................................................................................ 15 2-6 WiFi RF Specification – TX ........................................................................................................... 15 2-7 WiFi RF Specification – RX .......................................................................................................... 16 2-8 Antenna Specification Requirements ......................................................................................... 17 Chapter 3. MECHANICAL SPECIFICATION ......................................................... 18 3-1 Module Assembly Dimension ..................................................................................................... 18 Chapter 4. Additional Information ................................................................... 23 4-1 Module Photo ............................................................................................................................. 23 4-2 Label Specification ...................................................................................................................... 23
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 5 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 1. MODULE OVERVIEW The Foxconn B01-01 s a low profile, low power and high performance AIOT module. It is mainly consisted of Wireless IOT IC RTL8711AM, codec ALC5640 and 8MB flash for developing IOT application RTL8711AM is a highly integrated single-chip low power 802.11b/g/n Wireless LAN (WLAN) network controller. It combines an ARM-Cortex M3 MCU, WLAN MAC, a 1T1R capable WLAN based, and RF in a single chip. It also provides a bunch of configure GPIOs which are configured as digital peripheral for different applications and control usage. ALC5640 is a high performance, low power, dual I²S interface audio codec. Asynchronous Sample Rate Converter (ASRC) provides independent and asynchronous connections to different processors, such as an application processor, baseband processor or wireless transceiver. Alc5640 have stereo Class-D Speaker amplifiers provide 1.5W per channel into 8Ω or 2.5W per channel into 4Ω with a 5V supply, with excellent PSRR and low EMI. 1-1 Key Characteristic  compatible WLAN  72.2Mnps receive and transmit PHY rate using 20MHz bandwidth  150Mnps receive and transmit PHY rate using 40MHz bandwidth  802.11i(WPA,WPA2). Open, shared key, and pair-wise key authentication services  WiFi WPS support  WiFi Direct support  1 set of I2C interface  1 set of log UART with standard baud rate support  I2S with 8/16/24/32/48/96/44.1/88.2KHz sample rate  Mono BTL(Bridge-Tied-Load) Class-D amplifier
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 6 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 1-2 Pin Definition Figure 1 Pin Definitions (Module Top View) Table 1 CN1 Terminal for home appliance Pin Definitions Pin Number Symbol Name Type Pin Description 1 VCC POWER DC 5V 2 VCC POWER DC 5V 3 UART0_RTS I/O UART RTS (RTL8711AM GPIOA_3) 4 UART0_CTS I/O UART CTS (RTL8711AM GPIOA_5) 5 UART0_RX I/O UART RX (RTL8711AM GPIOA_6) 6 UART0_TX I/O UART TX (RTL8711AM GPIOA_7) 7 CHIP_EN I Module enable control active : High(3.3V) 8 NC NC NC 9 I2C3_SCL I/O I2C Clock (RTL8711AM GPIOB_2) 10 I2C3_SDA I/O I2C data (RTL8711AM GPIOB_3) 11 GPIO I/O GPIO (RTL8711AM GPIOE_2) 12 GND GND Ground 13 SPKOUT_P O Speaker amplifier differential positive output 14 SPKOUT_N O Speaker amplifier differential negtive output 15 GND GND Ground CN1 CN2
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 7 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Table 2 CN2 Service UART terminal Pin Definitions Pin Number Symbol Name Type Pin Description 1 VCC POWER DC 3.3V 2 DEBUG_UART_TX I/O Debug UART TX(RTL8711AM GPIOB_0) 3 DEBUG_UART_RX I/O Debug UART RX(RTL8711AM GPIOB_1) 4 GND GND Ground
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 8 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 1-3 PCB Specification Board-maker: Foxconn 宏華精密電子(煙台)有限公司 Material of the board: FR4 Model number: 1P-1173X00-40SB Board-thickness: 1.0mm (typ) Product-height: 5.45mm (max) Tolerance: 0.1mm Flame class: UL94V-0
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 9 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 2. ELECTRICAL AND RF SPECIFICAITON 2-1 Recommended Operation Rating Table 4 Operation Rating Parameter Condition Min Typ. Max. Unit VCC 3.3V 4.5V 5V 5.5V V RF Interface Zo 50 Ohm 2-2 Digital IO Pin DC Characteristic Table 5 Typical IO DC Parameter (3.3V) Symbol Parameter Conditions Min. Typ. Max Units VIH Input-High Voltage LVTTL 2 - - V VIL Input-Low Voltage LVTTL - - 0.8 V VOH Output-High Voltage LVTTL 2.4 - - V VOL Output-High Voltage LVTTL - - 0.4 V VT+ Scmitt-trigger High Level 1.78 1.87 1.97 V VT+ Scmitt-trigger Low Level 1.36 1.45 1.56 V IIL Input-Leakage Current VIN=3.3v or 0 -10 ±1 10 μA 2-3 Analog Performance Table 6 Analog Performance Characteristics Parameter Min. Typ. Max Units Full Scale Output Voltage Speaker Amplifiers Output (SPKVDD=5.0V with 4Ω Load,1% THD+N) - 2.9 - Vrms
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 10 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 2-4 Power Consumption Table 8 Power Consumption Description Typical Unit IDLE (Disconnecting to AP) 130 mW IDLE (Connecting to AP) 280 mW Maxmimun B mode CCK11M(18dBm) with Speaker play Voice 1125 mW 2G/1T- N mode HT 40MHz MCS 7 (13dBm) 890 mW 2G/1T- N mode HT 20MHz MCS 7 (13dBm) 880 mW 2G/1T- G mode OFDM54M (14dBm) 930 mW 2G/1T- B mode CCK11M (16dBm) 1015 mW 2G/1R- N mode HT 40MHz MCS 7 (-60dBm) 275 mW 2G/1R- N mode HT 20MHz MCS 7 (-60dBm) 275 mW 2G/1R- G mode OFDM54M (-60dBm) 275 mW 2G/1R- B mode CCK11M (-60dBm) 275 mW 2-5 RF input and Output characteristic ˙RF Input and Output characteristic ( Ta=25˚C) ˙Transmitting and receiving frequency:1ch~13ch(center frequency 2412~2472MHz) ˙Wireless system IEEE 802.11b/g/n 2-6 WiFi RF Specification – TX Table 9 IEEE 802.11 b/g/n TX Output Power(Ave.) Data Rate (Mbps) Modulation Tx Typical Power (dBm) Data Rate (Mbps) Modulation Tx Typical Power (dBm) 1 DBPSK 16 HT20-MCS0 BPSK 13 2 DQPSK 16 HT20-MCS1 BPSK 13 5.5 CCK 16 HT20-MCS2 QPSK 13 11 CCK 16 HT20-MCS3 QPSK 13 6 OFDM 14 HT20-MCS4 16-QAM 13 9 OFDM 14 HT20-MCS5 16-QAM 13 12 OFDM 14 HT20-MCS6 64-QAM 13 18 OFDM 14 HT20-MCS7 64-QAM 13
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 11 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 24 OFDM 14 36 OFDM 14 48 OFDM 14 54 OFDM 14 Tolerance:+/-2dBm 2-7 WiFi RF Specification – RX Table 10 IEEE 802.11 b/g/n RX Senusitivity Data Rate (Mbps) Modulation Rx Sensitivity (dBm) Data Rate (Mbps) Modulation Rx Sensitivity (dBm) Max. Typ. Max. Typ. 1 DBPSK -83 -95 HT20-7.22 BPSK -82 -91 2 DQPSK -80 -94 HT20-14.44 QPSK -79 -87.5 5.5 CCK -79 -90 HT20-21.67 QPSK -77 -86 11 CCK -76 -87 HT20-28.89 16-QAM -74 -82.5 6 OFDM -85 -92 HT20-43.33 16-QAM -70 -79.5 9 OFDM -84 -91 HT20-57.78 64-QAM -66 -75 12 OFDM -82 -88.5 HT20-65 64-QAM -65 -74 18 OFDM -80 -86.5 HT20-72.22 64-QAM -64 -72 24 OFDM -77 -83.5 HT40-15 BPSK -79 -89 36 OFDM -73 -80.5 HT40-30 QPSK -76 -85 48 OFDM -69 -76 HT40-45 QPSK -74 -83 54 OFDM -68 -74.5 HT40-60 16-QAM -71 -80 HT40-90 16-QAM -67 -77 HT40-120 64-QAM -63 -72 HT40-135 64-QAM -62 -70 HT40-150 64-QAM -61 -70
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 12 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved 2-8 Antenna Specification Requirements Nominal antenna port impedance specification is 50 ohms for the Foxconn B01 hardware. For regulatory requirements, it is assumed that the antenna gain is: Antenna gain for the 2.4GHz band : 2.0dBi ANT
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 13 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 3. MECHANICAL SPECIFICATION 3-1 Module Assembly Dimension
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 14 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved CHAPTER 4. ADDITIONAL INFORMATION 4-1 Module Photo Figure 2 Top Side Photo Figure3 Bottom Side Photo 4-2 Environment Specifications ˙Operating Conditions (preliminary) Operation Temperature : -10 ~ 80℃ Relevant Humidity: 5 ~ 95% (non-condensing) ˙Storage Conditions (preliminary) Non-Operation Temperature : -20 ~ 85℃ (Typ. 25℃) Relevant Humidity: 5 ~ 95% (non-condensing
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 15 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 16 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: RX3-B01”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 17 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Canada, Industry Canada (IC) Statement This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Required end product labeling: Any device incorporating this module must include an external, visible, permanent marking or label which states: “Contains IC: 2878F-B01” This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type: Printing Peak Gain: 2.0 dBi
CPWB-B450JBKZ PRODUCT SPECIFICATION October 26, 2017 FOXCONN CONFIDENTIAL 18 This preliminary specification is subject to change without notice. Copyright © 2016 Hon Hai Precision Ind Co., Ltd. All rights reserved Canada, Industrie Canada (IC ) Déclaration Cet appareil numérique de classe B est conforme à la norme NMB-003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Déclaration d'exposition aux radiations: Cet appareil est conforme aux limites d'exposition aux rayonnements définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à une distance minimale de 20 centimètres entre le radiateur et votre corps. Obligation d'étiquetage du produit final: Tout dispositif intégrant ce module doit comporter un externe, visible, marquage permanent ou une étiquette qui dit: "Contient IC : 2878F-B01". Cet émetteur radio ( identifier le dispositif par numéro de certification ou le numéro de modèle , si la catégorie II ) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous avec le gain maximal admissible indiqué . types d'antennes non inclus dans cette liste , ayant un gain supérieur au gain maximum indiqué pour ce type , sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne: Printing Pic Gain: 2.0 dBi

Navigation menu