Hon Hai Precision Industry WFUR6 802.11a/b/g/n/ac 2T2R WLAN MODULE User Manual WFUR6 datasheet V02 20140221x
Hon Hai Precision Industry Co., Ltd. 802.11a/b/g/n/ac 2T2R WLAN MODULE WFUR6 datasheet V02 20140221x
User Manual
Foxconn WFUR6 Foxconn WFUR6 Hardware Specification Rev. 0.2 Foxconn WFUR6 Document Revision History Document Revision Date Modifier Comments 0.1 Dec. 30, 2013 Lin Eric Initial release 0.2 Feb. 21,2014 Lin Eric Modify Pin Definitions Foxconn WFUR6 Contents 1. INTRODUCTION ............................................................................................ 5 1.1 Product Overview ............................................................................................. 5 1.2 Key Features ..................................................................................................... 5 2. ELECTRICAL SPECIFICATIONS.......................................................................... 6 2.1 Pin Definitions .................................................................................................. 6 2.2 Power Consumption Specifications..................................................................... 7 3.RF SPECIFICATION .......................................................................................... 8 3.1 TX Specifications (preliminary) ........................................................................... 8 3.2 RX Specifications (preliminary)........................................................................... 8 3.3 Antenna Specifications .................................................................................... 10 4. MECHANICAL SPECIFICATIONS ..................................................................... 11 4.1 Mechanical Drawing ........................................................................................ 11 4.2 RF connector................................................................................................... 12 4.2.1 Specification ................................................................................................ 12 4.2.2 Dimensions: (Unit: mm) ................................................................................ 12 4.3 Label Specifications ......................................................................................... 12 5. ENVIRONMENTAL SPECIFICATIONS .............................................................. 13 6. PART NUMBERING ...................................................................................... 14 6.1 ID Definitions .................................................................................................. 14 Foxconn WFUR6 7. MODULE PHOTO ......................................................................................... 15 Foxconn WFUR6 1. Introduction 1.1 Product Overview The Foxconn WFUR6 wireless LAN module contains the Realtak® RTL8812AU single chip which is a highly integrated single‐chip MIMO (Multiple In, Multiple Out) Wireless LAN (WLAN) USB 2.0 network interface controller complying with the wireless very high throughput IEEE 802.11ac Draft 2.0 and 802.11n specifications. It fully complies with IEEE 802.11 a/b/g/n /ac feature rich wireless connectivity at high standards, delivers reliable, cost‐effective, throughput from an extended distance. The optimized radio frequency architecture and baseband algorithms provide super performance and low power consumption. Deploy a high efficient USB engine and hardware data processing accelerators without overloading the host processor. Security, quality of service and international regulation are supported by WFUR6 and giving end users the greatest performance anytime in any circumstance. 1.2 Key Features CMOS MAC, Baseband PHY and RF in a single chip for IEEE 802.11a/b/g/n/ac Draft 2.0 compatible WLAN 802.11ac MIMO solution for 5G band Complete 802.11n MIMO solution for 2.4GHz and 5Ghz band 2x2 MIMO technology for extended reception robustness and exceptional throughput Maximum PHY data rate up to 173.3 Mbps using 20MHz bandwidth, 400Mbps using 40MHz bandwidth, and 866.7Mbps using 80MHz bandwidth. WEP 64/128, WPA, WPA2, TKIP, AES, WAPI QoS‐WMM, WMM‐PS, WPS/WPS2, PIN, PBC Complies with USB 1.0/1.1/2.0 for WLAN International Regulation – 802.11i/h/k Low power with advanced power management Foxconn WFUR6 2. Electrical Specifications 2.1 Pin Definitions Table 2.1 Pin Definitions Pin # Name Pin # Name 51 N/A 52 +3.3V 49 N/A 50 GND 47 N/A 48 N/A 45 N/A 46 N/A 43 GND 44 N/A 41 +3.3V 42 N/A 39 +3.3V 40 GND 37 GND 38 UDP 35 GND 36 UDM 33 HSIN_A 34 GND 31 HSIP_A 32 N/A 29 GND 30 N/A 27 GND 28 N/A 25 HSON_A 26 GND 23 HSOP_A 24 N/A 21 GND 22 N/A 19 N/A 20 PDn 17 N/A 18 GND 15 GND 16 N/A 13 N/A 14 N/A 11 N/A 12 N/A GND 10 N/A N/A N/A N/A N/A N/A GND N/A +3.3V Foxconn WFUR6 2.2 Power Consumption Specifications Power consumption is measured using current probe loop on the Power rails of the USB interface (Pins). Table 2.2 Power Consumption Specifications(preliminary) Description Typical Unit Disable 19 mA 2G/2T‐ HT 40MHz MCS 7(14dBm) 235 mA 2G/2T‐ HT 20MHz MCS 7(14dBm) 260 mA 2G/2T‐ OFDM54M(15dBm) 270 mA 2G/2T‐ CCK11M(17dBm) 320 mA 5G/2T‐ HT 80MHz MCS 9(12dBm) 243 mA 5G/2T‐ HT 40MHz MCS 7(14dBm) 265 mA 5G/2T‐ HT 20MHz MCS 7(14dBm) 310 mA 5G/2T‐ OFDM54M(15dBm) 310 mA 2G/2R‐ HT 40MHz MCS 7 148 mA 2G/2R‐ HT 20MHz MCS 7 143 mA 2G/2R‐ OFDM54M 143 mA 2G/2R‐ CCK11M 143 mA 5G/2R‐ HT 80MHz MCS 9 195 mA 5G/2R‐ HT 40MHz MCS 7 188 mA 5G/2R‐ HT 20MHz MCS 7 185 mA 5G/2R‐ OFDM54M 185 mA Foxconn WFUR6 3.RF Specification 3.1 TX Specifications (preliminary) Table 3.1 TX Specifications Target Power(dBm) Tolerance(dB) Chain 0/Chain 1 802.11a 13 +1.5/-2 802.11ac(20MHz) 14.5 +/-1.5 802.11ac(40MHz) 14 +/-1.5 802.11ac(80MHz) 12 +/-2 801.11b 16 +/-2 802.11g 15 +/-2 802.11n(20MHz) 14 +/-2 802.11n(40MHz) 13.5 +/-2 3.2 RX Specifications (preliminary) Table 3.2 RX Specifications (ANT 1 & ANT 2) Data Rate (Mbps) Modulation Rx Sensitivity (dBm) Data Rate (Mbps) Max. Typ. DBPSK ‐83 ‐94 HT20‐7.22 DQPSK ‐80 ‐93 5.5 CCK ‐78 11 CCK Rx Sensitivity (dBm) Modulation Max. Typ. BPSK ‐82 ‐87 HT20‐14.44 QPSK ‐79 ‐86 ‐91 HT20‐21.67 QPSK ‐77 ‐84 ‐76 ‐89 HT20‐28.89 16‐QAM ‐74 ‐82 OFDM ‐85 ‐88 HT20‐43.33 16‐QAM ‐70 ‐78 OFDM ‐84 ‐87 HT20‐57.78 64‐QAM ‐66 ‐74 12 OFDM ‐82 ‐86 HT20‐65 64‐QAM ‐65 ‐72 18 OFDM ‐80 ‐85 HT20‐72.22 64‐QAM ‐64 ‐71 Foxconn WFUR6 24 OFDM ‐77 ‐82 HT40‐15 BPSK ‐79 ‐87 36 OFDM ‐73 ‐79 HT40‐30 QPSK ‐76 ‐84 48 OFDM ‐69 ‐75 HT40‐45 QPSK ‐74 ‐81 54 OFDM ‐68 ‐74 HT40‐60 16‐QAM ‐71 ‐79 HT40‐90 16‐QAM ‐67 ‐74 HT40‐120 64‐QAM ‐63 ‐71 HT40‐135 64‐QAM ‐62 ‐70 HT40‐150 64‐QAM ‐61 ‐68 HT80‐32.5 BPSK ‐76 ‐83 HT80‐65 QPSK ‐73 ‐83 HT80‐97.5 QPSK ‐71 ‐81 HT80‐130 16‐QAM ‐68 ‐77 HT80‐195 16‐QAM ‐64 ‐74 HT80‐260 64‐QAM ‐60 ‐70 HT80‐292.5 64‐QAM ‐59 ‐68 HT80‐325 64‐QAM ‐58 ‐67 HT80‐390 256‐QAM ‐53 ‐62 HT80‐433.3 256‐QAM ‐51 ‐59 Foxconn WFUR6 3.3 Antenna Specifications Nominal antenna port impedance specification is 50 ohms for the Foxconn WFUR6 hardware. For regulatory requirements, it is assumed that the antenna gain is: Antenna gain for the 2.4GHz band : 3.47 dB Antenna gain for the 5GHz band : 4.66 dB There are two antennas supporting 2.4~2.5GHz band and 5.15~5.85GHz. The antenna will be defined ANT 1 and ANT 2 where is listing below: Figure 4.1 WFUR6 Perspective 10 Foxconn WFUR6 4. Mechanical Specifications 4.1 Mechanical Drawing Figure 4.1 WFUR6 mechanical drawing 11 Foxconn WFUR6 4.2 RF connector Manufacturer: Speed tech Manufacturer P/N: C88P132‐01001‐H 4.2.1 Specification Operating temperature range: ‐40℃~90℃ Storage temperature range: ‐40℃~90℃ Characteristic impedance: 50Ω (0~3GHz) Voltage standing wave ratio: 1.3 max. at 2.4GHz, 1.4 max. at 6GHz 4.2.2 Dimensions: (Unit: mm) Figure 4.2 RF connector dimensions 4.3 Label Specifications 24mm 17mm Figure 4.3 WFUR6 Label Drawing 12 Foxconn WFUR6 5. Environmental Specifications The following tables provide normal operating conditions and maximum rating requirements for WFUR6 hardware. Table 5.1 Operating Conditions (preliminary) Environment Limits Operating 0 ~ 60℃ ※The radio parts at operating state and above temperature of T‐shield. Table 5.2 Non‐operating Conditions (preliminary) Temperature Environment Humidity Min. Typ. Max. Unit Min. Typ. Max. Unit Non‐Operating ‐40 25 85 ℃ 45 ‐ 90 ※ Temperature condition for storage (Packaged) in warehouse is Maximum 40℃ up to 6 months. 13 Foxconn WFUR6 6. Part Numbering 6.1 ID Definitions Table 6.1 ID Definitions WLAN Type Realtek RTL8812‐AU LAN 802.11n usb2.0 Network Adaptor 14 Mode PID VID BGN 0x881A 0x0BDA Foxconn WFUR6 7. Module Photo Top Side Bottom Side 15 Foxconn WFUR6 Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Operation on the 5.15‐5.25 GHz frequency band is restricted to indoor use only. 16 Foxconn WFUR6 Industry Canada Statement This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." CAN ICES‐3(B)/ NMB‐3(B) The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co‐channel mobile satellite systems; the maximum antenna gain permitted for devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply with the e.i.r.p. limit; and the maximum antenna gain permitted for devices in the band 5725–5825 MHz shall comply with the e.i.r.p. limits specified for point‐to‐point and non point‐to‐point operation as appropriate. In addition, high‐power radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE‐LAN devices. 17 Foxconn WFUR6 Radiation Exposure Statement This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. End Product Labeling When the module is installed in the host device, the FCC/IC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re‐moved. If not, a second label must be placed on the outside of the final device that contains the following text: “Contains FCC ID:RX3‐WFUR6” “Contains IC:2878F‐WFUR6 “ The grantee's FCC ID/IC ID can be used only when all FCC/IC compliance requirements are met. This device is intended only for OEM integrators under the following conditions: (1) The antenna must be installed such that 20 cm is maintained between the antenna and users, (2) The transmitter module may not be co‐located with any other transmitter or antenna. (3) The FX5541‐11‐002‐C‐TB00 antenna with 4.66dBi gain was verified in the conformity testing. Radiated transmit power must be equal to or lower than that specified in the FCC/IC Grant of Equipment Authorization for FCC ID:RX3‐WFUR6 and IC:2878F‐WFUR6. A separate approval is required for all other antenna type, or higher gain antenna. In the event that these conditions cannot be met (for example certain laptop configurations or co‐location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re‐evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. 18
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : CathyCJKuo Create Date : 2014:03:18 08:34:37+08:00 Modify Date : 2014:03:28 19:52:36+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2014:03:28 19:52:36+08:00 Producer : Acrobat Distiller 9.3.3 (Windows) Format : application/pdf Title : Microsoft Word - WFUR6_datasheet_V02_20140221.docx Creator : CathyCJKuo Document ID : uuid:712dc568-5afe-463e-a258-d964876dfebe Instance ID : uuid:3cc304c4-f7da-4d06-b15d-4c4dc74be7f3 Page Count : 18EXIF Metadata provided by EXIF.tools