Honda Hrt216S3Da Mczg 6300001 Through 6699999 Owners Manual INTRO.CHP

Honda-Hrr216S3Da-Users-Manual-657330 honda-hrr216s3da-users-manual-657330

!! 31VG4610 Mb Quart Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

Preview ! 31VG4610 Mb Quart Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

2014-11-13

: Honda Honda-Hrt216S3Da-Mczg-6300001-Through-6699999-Owners-Manual-108546 honda-hrt216s3da-mczg-6300001-through-6699999-owners-manual-108546 honda pdf

Open the PDF directly: View PDF .
Page Count: 67

Download
Open PDF In Browser	View PDF

Owner's Manual
Rotary Mower
HRS216PDA • HRS216SDA
HRR216PDA • HRR216SDA • HRR216S3DA
HRT216SDA • HRT216S3DA

K1
EM
31VG4610
00X31-VG4-6100

Printed on
Recycled Paper

POM52774-A

¿Necesita un manual en Español? Vea a la página 58.

600.2001.06
PRINTED IN U.S.A.

QUICK REFERENCE INFORMATION
Fuel

type

Unleaded gasoline with a pump octane of 86 or

capacity

higher (page 38).
0.29 U.S. gallon (1.1 liter)

Engine Oil

type
capacity

SAE 10W-30, API SH or SH (page 35)
0.58 U.S. quart (0.55 liter)

Spark Plug

type

Regular: NGK - BP6ES
DENSO - W20EP-U
Resistor: NGK BPR6ES
DENSO - W20EPS-U
0.028 ~ 0.031 in (0.7 ~ 0.8 mm)

WARNING:
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.

gap

Keep this owner’s manual handy, so you can refer to it any time,
and make sure the manual stays with the lawn mower if you sell it.
This owner’s manual is considered a permanent part of the lawn
mower and should remain with the mower if resold.
The information and specifications included in this publication were
in effect at the time of approval for printing. Honda Power
Equipment Mfg., Inc. reserves the right, however, to discontinue or
change specifications or design at any time without notice and
without incurring any obligation whatever.
Honda lawn mowers meet Consumer Product Safety Commission
(CPSC) blade safety requirements for walk-behind rotary mowers.

Blade Bolts

torque

36 ~ 43 ft-lb (5.0 ~ 6.0 kg-m, 49 ~ 59 N•m)
page 39

Carburetor

idle speed

1,550 ~ 1,850 rpm (see shop manual)

Maintenance

before each
use
subsequent

Check blade and bolt tightness (page 12, 39)
See the Maintenance Schedule (page 33)

INTRODUCTION
Congratulations on your selection of a Honda lawn mower. We are
certain you will be pleased with your purchase of one of the finest
lawn mowers on the market.
We want to help you get the best results from your new mower and to
operate it safely. This manual contains the information on how to do
that; please read it carefully.
As you read this manual, you will find information preceded by a
NOTICE symbol. That information is intended to help you avoid
damage to your mower, other property, or the environment.
We suggest you read the Distributor’s Limited Warranty (p. 51) and
the Emission Control System Warranty (p. 55) to fully understand
coverage and your responsibilities of ownership.
When your mower needs scheduled maintenance, keep in mind that
an authorized Honda servicing dealer is specially trained in servicing
Honda mowers and is supported by the parts and service divisions of
American Honda. Your Honda dealer is dedicated to your satisfaction
and will be pleased to answer your questions and concerns.
Best Wishes,
Power Equipment Division
American Honda Motor Co., Inc.
© 1999 American Honda Motor Co., Inc. – All Rights Reserved

INTRODUCTION
A FEW WORDS ABOUT SAFETY
Your safety, and the safety of others, is very important. And using this
lawn mower safely is an important responsibility.
To help you make informed decisions about safety, we have provided
operating procedures and other information on labels and in this
manual. This information alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to warn you about all the
hazards associated with operating or maintaining a lawn mower. You
must use your own good judgment.
You will find important safety information in a variety of forms,
including:
• Safety Labels — on the lawn mower.
• Safety Messages — preceded by a safety alert symbol
and
one of three words: DANGER, WARNING, or CAUTION.
These signal words mean:

B DANGER

You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

B WARNING

You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

B CAUTION

You CAN be HURT if you don’t follow
instructions.

• Safety Headings — such as Important Safety Reminders or
Important Safety Precautions.
• Safety Chapter — such as MOWER SAFETY.
• Instructions — how to use this mower correctly and safely.
This entire book is filled with important safety information — please
read it carefully.

CONTENTS
MOWER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
A FEW WORDS ABOUT SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 4
IMPORTANT MESSAGE TO PARENTS . . . . . . . . . . . . . . . . . . . . . . . 5
SAFETY LABEL LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
COMPONENT IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DESCRIPTION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
BEFORE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ARE YOU READY TO MOW? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHECK YOUR LAWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHECK YOUR MOWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MOWING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
STARTING THE ENGINE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
OPERATING THE CONTROLS FOR MOWING . . . . . . . . . . . . . . . . . 19
STOPPING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SAFE MOWING PRACTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MOWING TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TRANSPORTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
BEFORE LOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
LOADING AND UNLOADING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
THE IMPORTANCE OF MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . 28
MAINTENANCE SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
MAINTENANCE SCHEDULE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ENGINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BLADE REMOVAL AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 38
GRASS BAG CLEANING AND REPLACEMENT . . . . . . . . . . . . . . . . . 39
EMISSION CONTROL SYSTEM INFORMATION . . . . . . . . . . . . . . . . 30
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
STORAGE PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
STORAGE PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
REMOVAL FROM STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ADDITIONAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
ACCESSORIES AND REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . 50
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
OXYGENATED FUELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
HONDA PUBLICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SPARK ARRESTER SERVICE (optional equipment) . . . . . . . . . . . . . 60
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
QUICK REFERENCE INFORMATION . . . . . . . . . . . . . . . . . . . . inside back cover

MOWER SAFETY
IMPORTANT SAFETY INFORMATION
Most accidents with walk-behind mowers can be prevented if you
follow all instructions in this manual and on the mower. The most
common hazards, according to accident statistics, are discussed
below, along with the best way to protect yourself and others.
Avoid Rotating Blades
Rotating blades can cause serious cuts and even amputate fingers,
hands, toes, or feet. Keep away from the mower deck whenever the
engine is running. If you need to adjust the cutting height, or work
around the deck for any other reason, always shut off the engine.
Wear heavy gloves and disconnect the spark plug cap when you
need to clean the mower deck or handle the blade.
Clear Mowing Area
Mower blades can throw rocks and other objects with enough force to
cause serious injury. Before mowing, carefully inspect the area and
remove all sticks, stones, pieces of wire, and other loose objects.
Never operate the blade over gravel.
Keep Shields in Place
Guards and shields are designed to protect you from being hit by
thrown objects and from hot engine parts and moving components.
For your safety and the safety of others, keep all shields in place
when the engine is running.
Refuel with Care
Gasoline is extremely flammable and gasoline vapor can explode.
Refuel only outdoors, in a well-ventilated area, with the engine OFF.
Never smoke near gasoline, and keep other flames and sparks away.
Always store gasoline in an approved container.
Wear Protective Clothing
Wearing protective clothing will reduce your risk of injury. Long pants
and eye protection reduce the risk of injuries from thrown objects.
Sturdy shoes with aggressive soles will help protect your feet and
give you better traction on slopes or uneven ground.
Turn Engine Off When Not Mowing
If you need to leave the mower for any reason, even just to inspect
the lawn ahead, always turn the engine OFF.

MOWER SAFETY
IMPORTANT MESSAGE TO PARENTS
YOUR CHILDREN’S SAFETY IS VERY IMPORTANT to Honda.
That’s why we urge you to read this message before letting your
youngster operate this lawn mower. Lawn mowers are tools, not toys.
As with any equipment, bad judgments can result in serious injuries.
You can help prevent accidents by making good decisions about if,
when, and how your youngster operates this equipment.
The first question you’ll need to ask is whether your youngster is
capable of operating this mower safely. Remember, young people
vary widely, and AGE IS NOT THE ONLY FACTOR.
Physically, a youngster must be LARGE ENOUGH AND STRONG
ENOUGH to easily start the mower and control its direction. The
youngster also needs enough size, strength, and coordination to
comfortably reach and operate the controls.
Another, tougher question you need to ask is if your youngster has
enough MATURITY AND RESPONSIBILITY to safely operate this
mower. Does the young person think through problems and come to
logical solutions? Be honest! Anyone who takes unnecessary risks
and doesn’t obey rules should not operate this lawn mower.
If you decide that your son or daughter can handle the mower safely,
CAREFULLY READ THE OWNER’S MANUAL with your youngster.
Make sure you both understand all instructions and safety
information. Also, be sure your youngster wears sturdy shoes and
other protective clothing when operating or handling the mower.
SUPERVISION is also very important. Walk with your youngster
during the first few minutes of mowing. Even after the youngster has
become confident with the mower, do not let the young person use
the mower without good adult supervision. An adult should also be
present during refueling and maintenance. In fact, it’s up to parents to
make sure that the mower is properly maintained and kept in safe
operating condition.
By always placing safety first, your youngster will acquire useful skills
and a sense of accomplishment. And you’ll both get the best results
from your lawn mower.

MOWER SAFETY
SAFETY LABEL LOCATIONS
The labels shown here contain important safety information. Please
read them carefully. These labels are considered permanent parts of
your mower. So if a label comes off or becomes hard to read, contact
an authorized Honda dealer for a replacement.

(HRT/HRT ONLY)

WARNING

(HRT ONLY)

WARNING

AVOID SERIOUS INJURY OR DEATH.

OBJECTS THROWN BY BLADE
Follow all instructions in Owner's Manual. CAN CAUSE SERIOUS INJURY.
Go across slopes, not up and down.
Do not mow when children or others are
around
Look down and behind, before and
while moving backwards.
Keep safety devices (guards, shields,
switches, etc.) in place and working.

Inspect area and remove
debris before mowing.
Keep children and others away
Wear eye protection.
Do not operate unless bag or
chute are installed or guard is
in place.

CAUTION
UNDER NORMAL USAGE, THIS BAG MATERIAL IS
SUBJECT TO DETERIORATION AND WEAR, AND
SHOULD BE CHECKED FREQUENTLY FOR BAG
REPLACEMENT. THIS BAG CONFORMS TO
A.N.S.I. STANDARD B71.1 ANY REPLACEMENT
MUST MEET THIS STANDARD.

DANGER

KEEP HANDS and FEET AWAY

WA R N IN G
TO P VENT INJURY:
Do not operRE
ate unless bag or chute
are installed or guard is in place.

(HRS, HRT ONLY)

CAUTION
HOT MUFFLER CAN BURN YOU.
Stay away if engine has been running.

CONTROLS
COMPONENT IDENTIFICATION
DRIVE CLUTCH
LEVER (SD & S3D)
HANDLEBAR
FLYWHEEL BRAKE LEVER

RECOIL
STARTER
GRIP

ENGINE SERIAL NUMBER

REAR CUTTING
HEIGHT ADJUSTMENT
LEVER
OIL FILLER CAP
SIDE DISCHARGE
DOOR (HRS, HRT)
MUFFLER
(HRS216SDA shown)

FRONT CUTTING HEIGHT
ADJUSTMENT LEVERS

Model Identification

To easily identify your model, refer to the chart on page 46.

CONTROLS
REAR DOOR
(HRR, HRT)

SHIFT LEVER (S3D)

MULCHING PLUG
(HRR, HRT)

THROTTLE
LEVER
GRASS BAG
(HRT)
FRAME SERIAL
NUMBER

FUEL TANK CAP

SPARK PLUG CAP

HANDLEBAR
LOCKING
KNOB (2)

FUEL VALVE
CARBURETOR

AIR CLEANER
MOWER DECK

(HRT216S3DA shown)

Record the frame and engine serial numbers in the space below. You
will need these serial numbers when ordering parts and when making
technical or warranty inquiries (see page 58).
Frame serial number: MZ__ __ – ______________
Engine serial number: GJAE – ______________

CONTROLS
DESCRIPTION OF CONTROLS
Fuel Valve
The fuel valve controls fuel flow from the fuel tank to the carburetor.
The fuel valve must be ON to start and operate the mower. The fuel
valve should be kept OFF when the mower is not in use.
OFF

FUEL VALVE

Throttle Lever
CHOKE – – For starting a cold engine.
FAST – – – For restarting a warm engine and for mowing.
SLOW – – – For idling the engine.

CHOKE

Flywheel Brake Lever
This lever is connected to the
engine flywheel brake and the
engine switch. The engine will not
start unless this lever is pulled
backward against the handlebar.

FAST

SLOW

FLYWHEEL BRAKE LEVER

CONTROLS
Drive Clutch Lever (SD, S3D)
The drive clutch lever engages and
disengages the transmission that
drives the rear wheels. The drive
clutch lever should only be
engaged after the engine has been
started.

DRIVE CLUTCH LEVER (SD, S3D)

Shift Lever (S3D)
SHIFT LEVER (S3D)
The shift lever is used to select the
ground speed. 1 is the slowest, 2 is
medium, and 3 is the fastest
setting. The shift lever may be
used any time a change in ground
speed is required.

Cutting Height Adjustment Levers
The mower deck can be set to any of the six approximate settings.
The adjusters move back to lower and forward to raise the mower
deck. Each wheel should be adjusted to the same position.
HRR/HRT
3/4" (19 mm)
1-1/4 " (29 mm)
1-3/4" (41.5 mm)
2-1/4" (54 mm)
2-3/4" (67 mm)
3-1/4 (79 mm)

HRS
1" (25 mm)
1-1/2 " (37 mm)
2" (50 mm)
2-1/2" (66 mm)
3" (75 mm)
3-1/2 (87 mm)

REAR ADJUSTMENT LEVER

RIGHT SIDE SHOWN

FRONT
ADJUSTMENT
LEVER

BEFORE OPERATION
ARE YOU READY TO MOW?
Be sure to wear protective clothing. Long pants and eye protection
can lower your risk of injury from thrown objects. Wear footwear that
protects your feet and won’t let you slip if you mow on slopes or
uneven ground.

CHECK YOUR LAWN
For your safety and for the safety of others, always inspect the area
before mowing.
Objects
Anything which can be picked up by the blade and thrown is a
potential hazard to you and others. Look for things like stones, sticks,
bones, and wire. Remove them from the mowing area.
People and Pets
People and animals near the mowing area can move into your path or
into a position where they could be struck by thrown objects. Clear
the area of people and pets, especially children. Their safety is your
responsibility.
Lawn
Check the length and condition of the grass, so you will know what
cutting height and mowing speed to use.
Avoid mowing wet grass. Not only will wet grass clog your mower
deck and collect in clumps on the lawn, it also gives poor traction,
increasing your risk of losing your footing.

BEFORE OPERATION
CHECK YOUR MOWER
Blade
1. Turn the fuel valve to OFF (page
9). Disconnect the spark plug cap
from the spark plug (page 36).
2. Tilt the mower to the right, so
the carburetor side is up. This
will help to prevent fuel leakage
and hard starting.
3. Inspect the blade(s) for wear
and damage

BLADE(S)

BLADE BOLTS

NORMAL

EXCESSIVELY
WORN

BENT

CRACKED

A dull blade can be sharpened, but a blade that is worn out, bent,
cracked, or otherwise damaged must be replaced. A worn or damaged
blade can break, causing blade pieces to be thrown from the mower.
When a blade needs sharpening or replacement take the lawn mower
to an authorized Honda servicing dealer. Or, if you have a torque wrench,
you can remove and install the blade(s) yourself (page 38).
Check that the blade bolts are tight (see page 38).

BEFORE OPERATION
Engine Oil Level
Check the engine oil level with the
engine stopped and the mower on
a level surface.

FILLER CAP/DIPSTICK

1. Remove the oil filler cap, and
wipe the dipstick clean.

2. Insert and remove the dipstick
without screwing it into the
filler neck. Check the oil level
shown on the dipstick.
FILLER CAP/
DIPSTICK

3. If the oil level is low, add the
recommended oil (see page 34)
to reach the upper limit mark on
the dipstick. Do not overfill.

DON’T SCREW
DIPSTICK BACK IN TO
CHECK OIL LEVEL

UPPER LIMIT
LOWER LIMIT

4. After checking the engine oil
level, screw in the filler
cap/dipstick securely.

BEFORE OPERATION
Fuel
Fuel tank capacity: 0.29 US gal (1.1 l)
If the engine has been running, allow it to cool. Refuel in a
well-ventilated area before starting the engine. See page 37 for fuel
recommendations and page 59 for information on oxygenated fuels.
Remove the fuel tank cap and check the fuel level. Refill the tank if
the fuel level is low. Refuel carefully to avoid spilling fuel. Do not
overfill; there should be no fuel in the filler neck. After refueling,
tighten the fuel tank cap securely.

B WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Stop the engine and keep heat, sparks, and
flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Never refuel the mower inside a building where gasoline fumes may
reach flames or sparks. Keep gasoline away from appliance pilot
lights, barbecues, electric appliances, power tools, etc.
Spilled fuel is not only a fire hazard, it causes environmental damage.
Wipe up spills immediately.
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered by
the Distributor’s Limited Warranty (page 51).
FUEL FILLER
NECK

FUEL TANK CAP

BEFORE OPERATION
Air Cleaner Inspection
Make sure the air filter is clean and
in good condition. A dirty air filter
will restrict air flow to the
carburetor, reducing engine
performance. Refer to page 35 for
air cleaner service.

AIR CLEANER
HOUSING
PAPER FILTER
COVER

Grass Bag (HRT216)
A lawn mower works like a
vacuum cleaner; it blows air through the bag, which traps the grass
clippings. Always empty the grass bag before it becomes filled to the
limit of its capacity. Bagging performance will diminish after the bag
becomes about 90% filled. Also the bag is easier to empty when not
packed full.
Inspection
Inspect the grass bag before use. Check for holes, tears, and
excessive wear. The grass bag does wear during normal use, and will
eventually require replacement (page 39).
Installation
1. Raise the rear door and remove
the mulching plug. Hook the grass
bag frame onto the mower deck
as shown.

GRASS BAG
HANDLE

REAR DOOR

2. Release the rear door to secure
the grass bag in place.
Removal
1. Raise the rear door, grasp the
grass bag handle and remove the
grass bag.
2. Release the rear door.
3. When the grass bag is clear of the rear door, you can lift the grass
bag through the handlebars, or remove it from the rear of the
mower below the handlebar.

BEFORE OPERATION
Mulching Plug (HRR, HRT)
The mulching plug helps to curve
the inside of the mower deck for
more efficient mulching.

REAR DOOR

MULCHING
PLUG

Install and remove the mulching
plug by raising the rear door as
shown. The mulching plug only
fits one way. Remove the
mulching plug when using a grass
bag.
Side Discharge Chute
(HRS, HRT)
SIDE DOOR
To discharge clippings to the side,
install the side discharge chute as
shown here. On the HRT model,
remove the mulching plug when
using the side discharge chute for
best performance.
Be sure to remove the side
discharge chute when using the
grass bag or mulching.
Cutting Height
Check the mower deck cutting
height settings, and be sure that all
four adjustment levers are set to
the same cutting height position.
Each position changes the height
1/2 inch (13 mm).

SIDE DISCHARGE CHUTE
ADJUSTMENT LEVERS

To adjust cutting height, pull each
adjustment lever toward the wheel,
and move it into another notch.
If you are not sure what cutting height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Readjust cutting height if necessary.

OPERATION
MOWING PRECAUTIONS
Before operating the mower for the first time, please review the
MOWER SAFETY beginning on page 4 and the previous chapter,
titled BEFORE OPERATION.
Even if you have operated other mowers, take time to become
familiar with how this mower works and practice in a safe area until
you build up your skills.
For your safety, avoid starting or operating the engine in an enclosed
area such as a garage. Your mower’s exhaust contains poisonous
carbon monoxide gas which can collect rapidly in an enclosed area
and cause illness or death.

STARTING THE ENGINE
The blade turns when you pull the starter grip. It is easiest to start the
engine in a clear or mowed area where the blade can turn freely.
Turn the fuel valve to the ON position.

ON
FUEL VALVE

Move the throttle lever to CHOKE for a cold engine, or FAST for a
warm engine.

FAST

CHOKE

OPERATION
1. SD, S3D: Release the drive clutch
lever (page 10). If the drive clutch
lever is engaged, the mower will
move forward when you operate
the starter.

DRIVE CLUTCH LEVER (SD, S3D)

2. Pull back on the flywheel brake
lever and hold it against the
handlebar.

FLYWHEEL
BRAKE
LEVER

3. Pull the starter grip lightly until
you feel resistance, then pull
briskly. Return the starter grip
gently.

STARTER
GRIP

Keep your hands and feet away
from the mower deck at all
times when starting and running
the engine.
Continue to hold the flywheel
brake lever against the
handlebar; the engine will stop
if you release the lever.
4. If the CHOKE position was
used during starting, move the
throttle lever away from the
CHOKE position as soon as the
engine warms up enough to run
smoothly. Set the throttle lever
at FAST to mow or at SLOW to
idle.

FAST

CHOKE

OPERATION
OPERATING THE CONTROLS FOR MOWING
Throttle Lever
For best cut quality, always mow with the throttle lever in the FAST
position. When the blades rotate at the preset fast speed, it creates a
strong fan action that lifts and cuts grass more efficiently. Do not try
to increase the preset engine speed, the blades could fracture and
come apart.
FAST C

When you need to leave the mower for any reason, move the throttle
to SLOW, then turn the engine OFF by releasing the flywheel brake
lever.
Flywheel Brake Lever
The lever must be pulled backward
against the handlebar to start the
engine. The blade starts to rotate
when the lever is pulled back
against the handlebar and the recoil
starter grip is pulled.
Continue to hold the lever against
the handlebar to keep the engine
running and the blade rotating.
Release the lever to stop the engine
and stop blade rotation.
FLYWHEEL BRAKE LEVER

OPERATION
Drive Clutch Lever (SD, S3D)
Push the drive clutch lever forward
and hold it against the handlebar to
propel the mower forward.

DRIVE CLUTCH LEVER

Release the drive clutch lever to
stop the mower’s forward
movement.
Always release the drive clutch
lever before starting the engine. If
the drive clutch is engaged, the
mower will move forward when you
operate the starter.
Operate the drive clutch lever with a quick and complete motion, so
the drive clutch is either fully engaged or released. Hold the drive
clutch lever against the handlebar during self-propelled mowing. This
will help to extend the service life of the clutch mechanism.
Shift Lever (S3D)
Use the shift lever to adjust the forward
speed of the mower. Do not use the
throttle lever; the throttle lever must be
kept in the FAST position for the best
mowing performance.

EE
SP
D

1st and 2nd gears are recommended
for maximum mowing performance. 3rd
gear should be used to transport the
mower.

2nd GEAR

You may move the shift lever anytime;
however, if the mower is pulling hard,
release the drive clutch lever between
shifts for smooth operation.

1st GEAR

3rd GEAR

OPERATION
STOPPING THE ENGINE

SLOW

Move the throttle lever to the
SLOW position.

Release the drive clutch lever
(SD, S3D).

DRIVE CLUTCH LEVER (SD, S3D)

Release the flywheel brake lever.

When the mower is not in use, turn the fuel valve to OFF.
OFF

FUEL VALVE

OPERATION
SAFE MOWING PRACTICES
For your safety, keep all four wheels on the ground, and be careful to
avoid losing your footing and your control of the mower. Keep a firm
grip on the handlebar, and walk, never run, with the mower. Be very
careful when mowing uneven or rough ground. If stuck, do not kick or
push the mower with your foot. Use the handlebar only.

B WARNING
The blade is sharp and spins at high speed.
A spinning blade can cut you severely and
can amputate fingers and toes.
• Wear protective footwear
• Keep your hands and feet away from the
mower deck while the engine is running.
• Stop the engine before performing any
adjustment, inspection, or maintenance.
Slopes
Mow across slopes, not up and down. Avoid
steep slopes (more than 20°), and be careful
when changing direction. Mowing on a slope
when the grass is damp or wet could cause you
to slip, fall, and lose control of the mower.

MAXIMUM
SLOPE 20 °

C
OH

Obstacles
Use the side of the mower to cut close to obstacles, such as fences
or walls. Release the drive clutch lever to disengage the drive when
mowing around trees and other obstacles. Push the mower around
obstacles for better directional control. Be careful when mowing over
obstacles embedded in the lawn, such as sprinkler heads, paving,
edging, etc. Avoid anything sticking up above the surface of the lawn.
If the blade hits something, or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (see page 12). Striking objects may damage the blade, bend
the crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.

OPERATION

B WARNING
A worn, cracked, or damaged blade can break,
and pieces of the damaged blade can become
dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blade(s) regularly, and do not
operate the mower with a worn or damaged
blade.
The Distributor’s Limited Warranty (page 51) does not cover parts
damaged by accident or collision.
Gravel and Loose Objects
Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the flywheel brake
lever to stop the blade before reaching areas with gravel, loose
stones, or landscaping material.

MOWING TIPS
Which Blade?
Harmony II models offer a range of blade choices. Use this chart to
help determine which one is best for your lawn. See page 50 for more
parts and information on these blades.
Performance
Model
Mulching Bagging

HRS

HRR
HRT

Side
Discharge

Use These Blades (part number)

Good

Original equipment single (72511-VG3-000)

Best

Good

New upper (72531-VE2-010) and original equipment
single

Good

Best

New upper (72531-VE2-010) and lower
(72511-VE1-010)

Best

Good

Original equipment upper (72531-VE2-010) and
original lower (72511-VE2-000)

Good

Best

Original equipment upper and replace lower with a
high lift (72511-VE1-010)

OPERATION
When to Mow
Most grasses should be mowed when they have grown 1⁄2 to 1 inch
above their recommended height. More frequent mowing is required
for mulching than for bagging. For best mulching results, you may
need to mow the lawn twice a week during the growing season.
Cutting Height
Consult a local nursery or lawn and garden center for cutting height
recommendations and advice about specific types of grasses and
growing conditions in your area.
Most grass has stems and leaves. If you cut off the leaves, you’ll
scalp the lawn. Let the grass recover between mowings. Your mower
will work better, and your lawn will look better.
If your grass gets too tall, cut it once at the highest cutting height
setting, then mow again in 2 or 3 days. Don’t take off more than one
third of total grass height in any one mowing, or brown patches may
develop. Cutting height adjustment is explained on page 10.
Cutting Width
For an even lawn finish, overlap each mowing swath by a few inches.
If the grass is very tall or thick, use more overlap and a narrower
mowing swath.
Blade Speed
The blade(s) must spin very fast to cut properly. Always use the
FAST throttle setting. If engine speed drops, it could mean the engine
is being overloaded by the blade(s) trying to cut too much grass. Mow
a narrower swath, move the mower slower, install the discharge
chute (HRS, HRT), or raise the cutting height.
Blade Sharpness
A sharp blade cuts cleanly. A dull blade tears the grass, leaving
shredded ends that turn brown. When your blades don’t cut cleanly
anymore, have them sharpened or replaced.
Dry Grass
If the ground is too dry, mowing will stir up a lot of dust. Besides being
unpleasant to work in, too much dust will clog the air filter. If dust is a
problem, water your lawn the day before mowing. Mow when the
grass is dry to your touch, but the soil is still moist.

OPERATION
Wet Grass
Wet grass is slippery and can make you lose your footing. Also, wet
grass clippings will clog the mower deck and collect in clumps on the
lawn. Always wait for wet grass to dry before mowing.
Fallen Leaves
When equipped with the grass bag (optional for HRS, HRR models),
your mower can be used to pick up fallen leaves for disposal. If using
the mower to bag large amounts of fallen leaves, and not for mowing,
set the cutting height adjustment levers so the front of the mower
deck is one or two settings higher than the rear.
If you want to mulch fallen leaves into your lawn, don’t let the leaf
cover get too deep before you begin. For best results, start mulching
while grass still shows through the leaf cover. In places where fallen
leaves completely cover the grass, remove the leaves by raking, or
install a grass bag, so your mower can pick them up for disposal.
Clogged Mower Deck
Before clearing a clogged mower deck, stop the engine and turn the
fuel valve to the OFF position. With the spark plug cap disconnected, tilt
the mower so the carburetor side is up.
Clear a clogged deck with a stick, not your hands.

OPERATION
Mowing Patterns
Your Honda mower will work most efficiently if you use the following
mowing patterns as much as possible. Mower deck and equipment
design, and the direction in which the blade rotates, cause these
mowing patterns to give the best results.
Mulching
Use a counterclockwise mowing
pattern. If the lawn has an irregular
shape, or many obstacles, divide it
into sections where you can use
counterclockwise patterns.
Side-Discharge Mowing (HRS,
HRT)
Where possible, use the same
mowing pattern recommended for
mulching. If the lawn has an
irregular shape, or many obstacles,
divide it into sections where
clippings will be discharged away
from uncut areas. This will prevent
clippings from piling up in the path
of the mower.

MULCHING & SIDEDISCHARGE PATTERN

Bagging (HRT)
Use a clockwise mowing pattern.
This will give the best bagging
performance, leaving the least
amount of clippings on the lawn.
For thick, heavy grass, an optional
high-lift bagging blade (page 50)
may be purchased from an
authorized servicing Honda dealer.

BAGGING PATTERN

TRANSPORTING
BEFORE LOADING
If the engine has been running, allow it to cool for at least 15 minutes
before loading the mower on the transport vehicle. A hot engine and
exhaust system can burn you and can ignite some materials.
Turn the fuel valve to OFF. This will prevent carburetor flooding and
reduce the possibility of fuel leakage.
OFF

FUEL VALVE

If equipped, remove the grass bag.

LOADING AND UNLOADING
If a suitable loading ramp is not available, two people should lift the
mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport
vehicle. Tie the mower down with rope or straps, and block the
wheels. Keep the tie-down rope or straps away from the controls,
adjustment levers, cables, and the carburetor.
The handlebar can be folded so the mower will take up less space
(see page 44).

MAINTENANCE
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical, and trouble-free
operation. It will also help reduce air pollution.

B WARNING
Improper maintenance, or failure to correct a
problem before operation, can cause a
malfunction in which you can be seriously hurt
or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner’s
manual.
To help you properly care for your mower, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult, or require special tools, are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high-load or high-temperature operation, or use in unusually wet or
dusty conditions, consult your servicing dealer for recommendations
applicable to your individual needs and use.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine repair
establishment or individual, using parts that are “certified” to
EPA standards.

MAINTENANCE
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However,
we cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.

B WARNING
Failure to properly follow maintenance
instructions and precautions can cause you
to be seriously hurt or killed.
Always follow the procedures and precautions
in this owner’s manual.
Safety Precautions
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the
engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have

the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
Remember that an authorized Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, genuine
Honda parts or their equivalents for repair and replacement.

MAINTENANCE
EMISSION CONTROL SYSTEM INFORMATION
Source of Emissions
The combustion process produces carbon monoxide, oxides of
nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of
nitrogen is very important because, under certain conditions, they
react to form photochemical smog when subjected to sunlight.
Carbon monoxide does not react in the same way, but it is toxic.
Honda utilizes lean carburetor settings and other systems to reduce
the emissions of carbon monoxide, oxides of nitrogen, and
hydrocarbons.
The US and California Clean Air Acts
EPA and California regulations require all manufacturers to furnish
written instructions describing the operation and maintenance of
emission control systems.
The following instructions and procedures must be followed in order
to keep the emissions from your Honda engine within the emission
standards.
Tampering and Altering
Tampering with or altering the emission control system may increase
emissions beyond the legal limit. Among those acts that constitute
tampering are:
• Removal or alteration of any part of the intake, fuel, or exhaust

systems.
• Altering or defeating the governor linkage or speed-adjusting
mechanism to cause the engine to operate outside its design
parameters.
Problems that may Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your servicing dealer.
• Hard starting or stalling after starting.
• Rough idle.
• Misfiring or backfiring under load.
• Afterburning (backfiring).
• Black exhaust smoke or high fuel consumption.

MAINTENANCE
Replacement Parts
The emission control systems on your new Honda engine were
designed, built, and certified to conform with EPA and California
emission regulations. We recommend the use of genuine Honda
parts whenever you have maintenance done. These
original-design replacement parts are manufactured to the same
standards as the original parts, so you can be confident of their
performance. The use of replacement parts that are not of the
original design and quality may impair the effectiveness of your
emission control system.
A manufacturer of an aftermarket part assumes the responsibility
that the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the
part will not result in a failure of the engine to comply with
emission regulations.
Maintenance
Follow the maintenance schedule on page 32. Remember that
this schedule is based on the assumption that your machine will
be used for its designed purpose. Sustained high-load or
high-temperature operation, or use in unusually wet or dusty
conditions, will require more frequent service.

MAINTENANCE
MAINTENANCE SCHEDULE
REGULAR SERVICE PERIOD
Perform at every
indicated interval

first every
Before
every every every
See
month year or
Each
50
100
150
page
or 5
25
Use
hours hours hours
hours hours

Blade condition and
Check
blade bolt tightness

12
38

Grass Bag (HRT)

Check

Engine oil

Change
Check

Air Cleaner

Clean

34
1

35
1

Replace
Spark plug

Clean-adjust

Replace

Spark arrester
Clean-inspect
(optional equipment)

Check-adjust

Flywheel brake
operation

Inspect

Flywheel brake pad

Check

Throttle cable
Valve clearance

Clean

Fuel line

Check and
replace if
necessary

–

–
2

Adjust

Fuel tank

1
2

Adjust

36
59

Idle speed

O
2

Every 2 years

Service more frequently when used in dusty areas.
These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures.

–
–
–

MAINTENANCE
ENGINE MAINTENANCE
Engine Oil Change
Drain the used oil while the engine is warm. Warm oil drains
quickly and completely.
1. Turn the fuel valve to OFF to reduce the possibility of fuel leakage
(see page 21).
2. Wipe the oil filler area clean,
then remove the oil filler
cap/dipstick.
3. Place a suitable container next
to the mower to catch the used
oil, then tilt the mower on its
right side. The used oil will drain
through the filler neck. Allow the
oil to drain completely.
NOTICE
Improper disposal of engine oil
can be harmful to the
environment. If you change your
own oil, please dispose of the
used oil properly. Put it in a
sealed container, and take it to a
recycling center. Do not discard
it in a trash bin or dump it on the
ground.
4. Fill with the recommended oil. Do not overfill; measure the oil level
as shown on page 34.
Engine oil capacity:
0.58 US qt. (0.55 l)
NOTICE
Using nondetergent oil can shorten the engine’s service life, and
using 2-stroke oil can damage the engine.
5. Check the oil level as described in the next section.

MAINTENANCE
Engine Oil Level Check
1. Wipe the dipstick clean.
2. Insert and remove the dipstick
without screwing it into the filler
neck. Check the oil level shown
on the dipstick.
3. If the oil level is low, add oil to
reach the upper limit mark on
the dipstick. Do not overfill. If
the engine is overfilled, the
excess oil may be transferred to
the air cleaner housing and
filter.

FILLER CAP/
DIPSTICK
DON’T SCREW
DIPSTICK IN TO CHECK
OIL LEVEL

NOTICE
Running the engine with a low
oil level can cause engine
damage.

UPPER LIMIT
LOWER LIMIT

4. Screw in the filler cap/dipstick
securely.
Engine Oil Recommendations
Oil is a major factor affecting performance and service life. Use
4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use. Other viscosities
shown in the chart may be used when the average temperature in
your area is within the recommended range.
The SAE oil viscosity and
service classification are in
the API label on the oil
container. Honda
recommends that you use
API SERVICE category SH
or SJ oil with the API
certification mark displayed
on the container.

–20
–30

0
– 2 0 –10

40
0

60
10

AMBIENT TEMPERATURE

1000F
400C

SAE
10W-30

MAINTENANCE
Air Cleaner Service
A dirty air filter restricts air flow to the carburetor, reducing engine
performance. If you operate the mower in very dusty areas, clean
the air filter more often than specified in the MAINTENANCE
SCHEDULE.
NOTICE
Operating the engine without an air filter, or with a damaged filter,
will allow dirt to enter the engine, causing rapid engine wear. This
type of damage is not covered by the Distributor’s Limited
Warranty (page 51).

AIR CLEANER HOUSING
FILTER

COVER

1. Press down on the cover tabs, then remove the cover. Remove the
filter and inspect it; if damaged, replace the filter.
2. Clean the filter by tapping the filter several times on a hard surface
to remove dirt, or blowing compressed air (not exceeding 30 psi
[207 kPa]) through the filter from the inside. Never try to brush off
dirt; brushing will force dirt into the fibers.
3. Wipe dirt from the inside of the air cleaner housing and cover,
using a moist rag. Be careful to prevent dirt from entering the air
duct that leads to the carburetor. Reinstall the filter and cover.
Flywheel Brake Lever Operation Inspection.
Start the engine outdoors and move the throttle to FAST. Release
the flywheel brake lever; the engine should stop quickly. If it does
not, take your mower to an authorized Honda servicing dealer for
repair.

MAINTENANCE
Spark Plug Service
Refer to page 47 for replacement spark plug numbers.
NOTICE
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped and
free of deposits.
1. Disconnect the spark plug cap SPARK PLUG
and remove dirt from the area.
Use a spark plug wrench to
remove the spark plug.
2. Inspect the plug; replace it if the
electrodes are worn, or if the
insulator is cracked or chipped.
Clean the plug completely if you
are going to reuse it.

SPARK PLUG CAP

SPARK PLUG WRENCH

3. Set the gap to 0.028 ~ 0.031 in
(0.7 ~ 0.8 mm).
4. After the plug seats, tighten it
as follows to seat the washer:
Old plug: 1⁄8 to 1⁄4 turn
New plug: 1⁄2 turn
NOTICE
A loose spark plug can overheat
and damage the engine.
Overtightening the spark plug
can damage the threads in the
cylinder head.
5. Install the spark plug cap on the
spark plug.

0.028 ~ 0.031 in
(0.7 ~ 0.8 mm )

MAINTENANCE
Carburetor Modification for High Altitude Operation
At high altitude, the standard carburetor air-fuel mixture will be too
rich. Performance will decrease, and fuel consumption will
increase. A very rich mixture will also foul the spark plug and
cause hard starting. High altitude performance can be improved by
specific modifications to the carburetor. If you always operate your
mower at altitudes above 5,000 feet (1,500 meters) have an
authorized Honda servicing dealer perform this carburetor
modification. Even with modification, horsepower will decrease
about 3.5% for each 1,000 ft (300 m) increase in altitude. The
effect of altitude on horsepower will be greater than this if no
carburetor modification is made.
NOTICE
When the carburetor has been modified for high altitude
operation, the air-fuel mixture will be too lean for low altitude use.
Operation at altitudes below 5,000 feet (1,500 meters) with a
modified carburetor may cause the engine to overheat and result
in serious engine damage. For use at low altitudes, have an
authorized Honda servicing dealer return the carburetor to original
factory specifications.
Fuel Recommendations
Use unleaded gasoline with a pump octane rating of 86 or higher.
This engine is certified to operate on unleaded gasoline. Unleaded
gasoline produces fewer engine and spark plug deposits and
extends exhaust system life. Never use stale or contaminated
gasoline or an oil/gasoline mixture. Avoid getting dirt or water in
the fuel tank. Occasionally you may hear light “spark knock” or
“pinging” (metallic rapping noise) while operating under heavy
loads. This is no cause for concern. If spark knock or pinging
occurs at a steady engine speed, under normal load, change
brands of gasoline. If spark knock or pinging persists, see an
authorized Honda servicing dealer.
NOTICE
Running the engine with persistent spark knock or pinging can
cause engine damage. Running the engine with persistent spark
knock or pinging is misuse, and the Distributor’s Limited Warranty
(page 51) does not cover parts damaged by misuse. For
oxygenated fuel information refer to page 59.

MAINTENANCE
BLADE REMOVAL AND INSTALLATION
If you remove the blade(s), use a torque wrench for installation. Wear
heavy gloves to protect your hands. To avoid weakening the blade(s), or
causing imbalance or poor cutting, the blade(s) should be sharpened by
trained staff at an authorized Honda servicing dealer. If replacing the
blade, use a genuine Honda replacement blade(s) or equivalent.
1. Removal: Turn the fuel valve to OFF. Disconnect the spark plug
cap, then tilt the mower to the right side (carburetor side up).
2. Remove the two blade bolts with a 14 mm socket. Use a wooden
block to prevent the blade(s) from turning when removing the bolts.
Remove the blade(s) from the blade holder.
BLADE HOLDER
UPPER
BLADE
(HRR, HRT)
LOWER
BLADE
SPECIAL
WASHER (2)

BLADE
BOLT (2)

3. Installation: Clean around the blade holder. Install the blade(s)
using the bolts and special washers as shown (concave side of the
special washers toward the blade(s)).
The blade bolts and washers are specially designed for the mower.
Should you ever have to replace them, use only genuine Honda
parts. Otherwise, a blade may become detached from the mower
and cause serious injury.
4. Tighten the bolts with a torque wrench. Use a wooden block to stop
the blade(s) from turning.
Blade bolt torque: 36 ~ 43 ft-lb (49 ~ 59 N•m)

MAINTENANCE
If you don’t have a torque wrench, have an authorized Honda
servicing dealer tighten the blade bolts before you use the mower.
If the blade bolts are overtightened, they could break. If the blade
bolts are not tightened enough, they could loosen or come out. In
either case, it would be possible for the blade to fly off while you
are operating the mower.

GRASS BAG CLEANING AND REPLACEMENT (HRT)
Grass Bag Cleaning
Wash the bag with a garden
hose, and allow it to dry
completely before use; a wet
bag will clog quickly.
Grass Bag Replacement
Replace a worn or damaged
bag with a genuine Honda
bag or its equivalent.
Bag Removal
Unclip the plastic edges of the bag from the frame. Remove the bag
from the frame.
Bag Installation
Insert the frame into the new bag. Clip the plastic edges to the frame
as shown

TROUBLESHOOTING
ENGINE PROBLEMS
Engine Will Not Start

Possible Cause

Correction

1. Check control positions. Fuel valve OFF.
Throttle lever in wrong
position.
2. Check fuel.

3. Remove and inspect
spark plug.

4. Take mower to an
authorized Honda
servicing dealer, or
refer to shop manual.

Turn fuel valve ON (p. 9).
Move throttle lever to
CHOKE position, unless
the engine is warm (p. 17).
Out of fuel.
Refuel (p. 14).
Bad fuel; mower stored
Drain fuel tank and
without treating or
carburetor (p. 44).
draining gasoline, or
Refuel with fresh
refueled with bad gasoline. gasoline (p. 14).
Spark plug faulty,
Clean, gap, or replace
fouled, or improperly
spark plug (p. 36).
gapped.
Spark plug wet with
Dry and reinstall spark
fuel (flooded engine).
plug. Start engine with
throttle lever in FAST
position.
Fuel filter clogged,
Replace or repair faulty
carburetor malfunction,
components as necessary.
ignition malfunction,
valves stuck, etc.

Loss of Power

Possible Cause

Correction

1. Check throttle position.

Throttle not set to FAST.

2. Check grass height.

Grass too tall to cut.

3. Check under mower
deck.
4. Check air filter.

Mower deck clogged.

5. Check fuel.

Bad fuel; mower stored
without treating or
draining gasoline, or
refueled with bad
gasoline.
Fuel filter clogged,
carburetor malfunction,
ignition malfunction,
valves stuck, etc.

Move throttle to FAST
(p. 19).
Raise cutting height
(p. 10), cut narrower
swath (p. 24), or cut more
frequently.
Clean out mower deck
(p. 25).
Clean or replace air
filter (p. 35).
Drain fuel tank and
carburetor (p. 44).
Refuel with fresh
gasoline (p. 14).

6. Take mower to an
authorized Honda
servicing dealer, or
refer to shop manual.

Air filter clogged.

Replace or repair faulty
components as necessary.

TROUBLESHOOTING
VIBRATION PROBLEMS
Excessive
Vibration

Possible Cause

Correction

1. Check mower deck and
blade(s).

Grass and debris lodged
under mower deck.
Blade(s) loose, bent,
damaged, or unbalanced
by improper sharpening.
Mechanical damage, such
as a bent crankshaft.

Clean out mower deck
(p. 25).
Tighten loose blade
bolts. Replace damaged
blade(s) (p. 38).
Replace or repair faulty
components as necessary.

2. Take mower to an
authorized Honda
servicing dealer for
repair.

MOWING AND BAGGING PROBLEMS
Poor Cut Quality or
Poor Mowing/Bagging
Performance

Possible Cause

Correction

1. Check that the throttle
lever is in the FAST
position.
2. Reduce forward speed.

Engine speed is too slow
to cut well.

3. Check cutting height
adjustment levers.

Adjustment levers set
at different positions.

4. Check grass bag
(if equipped).

Grass bag overfilled or
clogged.

5. Check mower deck and
blade(s).

Mower deck clogged.

Move throttle lever to
the FAST position
(p. 19).
Walk slower (PD).
Release the drive clutch
lever (SD) and push
slower (SD & PD).
Shift to a lower gear (S3D)
Set all levers at the
same cutting height
position (p. 10).
Empty the grass bag.
Wash the grass bag if
clogged with dirt.
Clear out the mower deck
(p. 25).
Sharpen or replace
blade(s) if necessary
(p. 38).
Install correct blade(s)
(p. 38, ).

Mower is moving too fast
for lawn conditions.

Blade(s) dull, worn, or
damaged.
Wrong blade(s) installed.

STORAGE
STORAGE PREPARATION
Proper storage preparation is essential for keeping your lawn mower
trouble-free and looking good. The following steps will help to keep
rust and corrosion from impairing your lawn mower’s function and
appearance, and will make the engine easier to start when you use
the lawn mower again.
Cleaning
1. Wash the lawn mower, including the underside of the mower deck.
Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner.
NOTICE
• Using a garden hose or pressure washing equipment can force

water into the air cleaner. Water in the air cleaner will soak the
filters and can enter the carburetor or engine, causing damage.
• Water on a hot engine can cause damage. If the engine has
been running, allow it to cool for at least 1/2 hour before washing.
Mower Deck
If using a garden hose or pressure washing equipment to clean the
mower deck, be careful to avoid getting water into controls and
cables, or anywhere near the engine air cleaner or muffler opening.
Before washing the underside of the mower deck, be sure the fuel
valve is in the OFF position. Disconnect the spark plug cap. Rest
the mower on its right side, so the carburetor side is up. This will
help to prevent fuel leakage and hard starting due to carburetor
flooding. Wear heavy gloves to protect your hands from the blade.
2. After washing the lawn mower, wipe dry all accessible surfaces.
3. With the mower in an upright position, start the engine outdoors,
and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.
4. Stop the engine and allow it to cool.
5. After the lawn mower is clean and dry, touch up any damaged
paint, and coat other areas that may rust with a light film of oil.
Lubricate the control cable cores with a silicone spray lubricant.

STORAGE
Fuel
Gasoline will oxidize and deteriorate in storage. Old gasoline will
cause hard starting, and it leaves gum deposits that clog the fuel
system. If the gasoline in your mower deteriorates during storage,
you may need to have the carburetor and other fuel system
components, serviced or replaced.
The length of time that gasoline can be left in your fuel tank and
carburetor without causing functional problems will vary with such
factors as gasoline blend, your storage temperatures, and
whether the fuel tank is partially or completely filled. The air in a
partially filled fuel tank promotes fuel deterioration. Very warm
storage temperatures accelerate fuel deterioration. Fuel
deterioration problems may occur within a few months, or even
less if the gasoline was not fresh when you filled the fuel tank.
The Distributor’s Limited Warranty (page 51) does not cover fuel
system damage or engine performance problems resulting from
neglected storage preparation.
You can extend fuel storage life by adding a gasoline stabilizer
that is formulated for that purpose, or you can avoid fuel
deterioration problems by draining the fuel tank and carburetor.

Adding fuel stabilizer to extend fuel storage life
When adding a fuel stabilizer, fill the fuel tank with fresh gasoline.
If only partially filled, air in the tank will promote fuel deterioration
during storage. If you keep a container of gasoline for refueling,
be sure that it contains only fresh gasoline.
1. Add fuel stabilizer following the manufacturer’s instructions.
2. After adding a fuel stabilizer, run the engine outdoors for 10
minutes to be sure that treated gasoline has replaced the untreated
gasoline in the carburetor.
3. Stop the engine, and turn the fuel valve to the OFF position. This
turns off the fuel flow between the fuel tank and the carburetor.

STORAGE
Draining the Fuel Tank and Carburetor
1. Remove the carburetor drain bolt with a 10 mm wrench, and drain
the carburetor bowl fuel into an approved container.

B WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Stop the engine and keep heat, sparks, and
flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
2. Turn the fuel valve ON (page 9).
This will allow fuel in the fuel
tank to drain through the
carburetor bowl. After the fuel is
completely drained, reinstall the
drain bolt.
Engine Oil
Change the engine oil (page 33).

DRAIN BOLT

Engine Cylinder
Remove the spark plug (page 36). Pour a tablespoon (5 ~ 10 cc) of
clean engine oil into the cylinder. Pull the starter rope several times to
distribute the oil in the cylinder. Reinstall the spark plug. Pull the
starter rope slowly until resistance is felt then return the starter grip
gently. This closes the valves so moisture cannot enter.
Handlebar Folding
Remove the grass bag (if
installed). Loosen the handlebar
locking knobs. Press the handlebar
struts outward to release the
locating pins, then swing the
handlebar forward. Don’t allow the
cables to be bent or pinched.

LOCKING KNOB

STORAGE
STORAGE PRECAUTIONS
If your mower will be stored with gasoline in the fuel tank and
carburetor, it is important to reduce the hazard of gasoline vapor
ignition. Select a well-ventilated storage area away from any
appliance that operates with a flame, such as a furnace, water
heater, or clothes dryer. Also avoid any area with a
spark-producing electric motor, or where power tools are
operated.
If possible, avoid storage areas with high humidity, because that
promotes rust and corrosion.
Unless all fuel has been drained from the fuel tank, turn the fuel
valve to OFF to reduce the possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can
cause fuel or oil leakage.
The handlebar can be folded for compact storage (see page 44).
With the engine and exhaust system cool, cover the mower to
keep out dust. A hot engine and exhaust system can ignite or
melt some materials. Do not use sheet plastic as a dust cover. A
nonporous cover will trap moisture around the mower, promoting
rust and corrosion.

REMOVAL FROM STORAGE
Check your mower as described in the BEFORE OPERATION
chapter of this manual.
If the fuel was drained during storage preparation, fill the tank with
fresh gasoline. If you keep a container of gasoline for refueling,
be sure that it contains only fresh gasoline. Gasoline oxidizes and
deteriorates over time, causing hard starting.
If the cylinder was coated with oil during storage preparation, the
engine will smoke briefly at startup. This is normal.

SPECIFICATIONS
MODELS BY
FEATURE
push model

HRS216K1
PDA

SDA

HRR216K1
PDA

SDA

S3DA

SDA

S3DA

l
l

self-propelled, 1-speed

HRT216K1

l
l

self propelled, 3-speed

single mulching blade

twin mulching blades

grass bag

side-discharge door & chute

l =standard equipment m = optional accessory; see your Honda lawn mower dealer

DIMENSIONS, WEIGHTS &
CAPACITIES
Length

HRS216
PDA

SDA

54-7/8 in 57-1/4 in
(1395
(1455
mm)
mm)

HRR216
PDA

SDA

57.7 in
(1465
mm)

HRT216
S3DA

SDA

S3DA

60.0 in (1525 mm)

23.0 in (585 mm)

Width
Overall Height

37-3/8 in (950 mm)

Dry Weight

62.2 lb 69.4 lb 72.3 lb 75.0 lb 80.5 lb 79.1 lb 80.5 lb
(28.2 kg) (31.5 kg) (32.8 kg) (34.0 kg) (36.5 kg) (35.9 kg) (36.5 kg)
21 inches (530 mm)

Cutting Width
Cutting Heights

37.4 in (950 mm)

3/4 ~ 3-1/4" (19 ~ 79 mm)

1~3-1/2" (25~87 mm)

Fuel Tank Capacity

0.29 US gallon (1.1l)

Engine Oil Capacity

0.58 US qt (0.55l)

ENGINE

GCV160

Engine Type

4-stroke, overhead-cam, single-cylinder, air-cooled

Displacement

9.8 cu in (160 cc)

Bore and Stroke

2.52 x 1.97 in (64 x 50 mm)

Compression Ratio

8.5:1

Ignition System

Transistorized magneto

Maximum Horsepower

5.5 bhp (4.1 kW) @ 3,600 rpm

Maximum Torque

8.4 ft-lb (11.4 N•m) @ 2,500 rpm

SPECIFICATIONS
MAINTENANCE
Fuel

Unleaded gasoline with a pump octane
rating of 86 or higher

See page 37.

Engine Oil

SAE 10W-30, API SH or SJ

See page 34.

Transmission lubricant (SD, S3D)

Grease (NLGI #2)

See shop manual.

Spark Plug Type

Regular:
NGK – BP6ES
DENSO – W20EP-U
Resistor:
NGK - BPR6ES
DENSO - W20EPS-U

See page 36.

Maximum Governed Speed

2,950~3,100 rpm

See shop manual.

Throttle Cable

Adjust for proper choke operation and
maximum governed speed.

See shop manual.

Blade Bolt Torque

36 ~ 43 ft-lb
(5.0 ~ 6.0 kg-m, 49 ~ 59 N•m)

See page 38.

(Resistor plugs reduce
interference with radio and
television reception.)

TRANSMISSION

S3D

Type

single speed

3-speed

Ground Seds

2.8 mph (4.5 km/h)

1st: 1.8 mph (9 km/h)
2nd: 2.7 mph (4.3 km/h)
3rd: 3.4 mph (5.4 km/h)

TUNEUP
Spark Plug Gap

0.028 ~ 0.031 in (0.7 ~ 0.8 mm)

See page 36.

Idle Speed

1,700 ± 150 rpm

See shop manual.

Valve Clearance (cold)

Intake:
Exhaust:

Other Specifications

No other adjustments needed.

0.15 ± 0.02 mm
0.20 ± 0.02 mm

See shop manual.

ASSEMBLY
Unpacking & Handlebar Setup
Remove all the protective cardboard from the mower, including the
piece around the handlebar.
Loosen the two knobs on the lower
section of the handlebar enough to LOCKING KNOB (2)
raise the handlebar into the
mowing position. Once the
handlebar is in place, tighten the
knobs securely.

Install Starter Rope
Disconnect the spark plug cap. Pull
the flywheel brake lever back, then
pull the starter grip toward the
starter rope loop. Release the
lever, then press the rope into the
loop. Connect the spark plug cap.

LOOP

Assemble Grass Bag
(HRT)
Slide the grass bag frame into the
grass bag and install the clips as
shown.

GRASS BAG
HANDLE

Lift the rear door, remove the
mulching plug, then install the
grass bag.

REAR DOOR

ASSEMBLY & SET-UP
Add Oil & Fuel
The mower is shipped WITHOUT
OIL in the engine.
Add enough SAE 10W-30 (API
service category SH or SJ) oil to
bring the oil level between the
upper and lower limit marks on
the dipstick as shown. The oil
capacity is 0.58 US qt (0.55 l).
Do not overfill engine oil.
Add regular unleaded fuel to the
fuel tank. The fuel capacity is
0.29 US gallons (1.1 l).

FILLER CAP / DIPSTICK
DO NOT SCREW
DIPSTICK IN TO CHECK
OIL LEVEL

See pages 14, 37 and 58 for fuel
information.
UPPER LIMIT
LOWER LIMIT

Use the Pre-Delivery Check List
The Pre-Delivery Check List for the mower is on the back side of
the “Feature Card” included with the document packet. Review
the items on the list and make sure your mower is properly set up.
Before Use...
All operators of the mower must read the MOWER SAFETY,
CONTROLS, and BEFORE OPERATION chapters (starting on
page 4) before using the mower.

ADDITIONAL INFORMATION
ACCESSORIES AND REPLACEMENT PARTS
Contact a servicing Honda lawn mower dealer to purchase any of
these accessories or genuine replacement parts. Be sure to have the
serial number from the lawn mower and engine (page 7 & 8) when
you call the dealer. Your dealer can also help you purchase other
parts for your lawnmower that are not listed here.
Item

For model

Part Number

notes

HRS

06813-VG3-010

includes grass bag,
frame & new blades

HRR

06813-VG4-010

grass bag and frame

Replacement grass
bag only

HRT/HRT

81320-VG4-000

HRS

81320-VG3-000

High lift bagging blade *

all

72511-VE1-010

Single mulching blade

HRS

72511-VG3-000

Grass bag kit *

Upper mulching blade

all **

Lower mulching blade
Mulching plug
Parts Catalog

72531-VE2-010

use with grass bag
see page 23 for blade
application chart

72511-VE2-000
HRR, HRT

76266-VG4-000

HRS

14VG30E2-AH

HRR, HRT

14VG40E2-AH

Shop Manual

61VG3600

Spark plug (NGK)

98079-56846

Air filter

fabric bag only

all

Spark arrester parts *

17211-ZL8-000
18350-ZL8-000

arrester & deflector

18356-ZL8-000

ID plate

90055-ZE1-000

screw

* accessory item, not included with model
** HRS models come standard with a single mulching blade, but can be upgraded to twin
mulching blades for maximum mulcing performance by installing the upper blade
(72531-VE2-010).

ADDITIONAL INFORMATION
WARRANTY
Distributor’s Limited Warranty
PRODUCTS COVERED
BY THIS WARRANTY:

Harmony II Lawn Mowers

LENGTH OF WARRANTY:
(from date of original retail purchase)
Noncommercial/Nonrental

Commercial/Rental

24 months

3 months

To Qualify for this Warranty:
The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin
Islands from American Honda or a dealer authorized by American Honda to sell those
products. This warranty applies to the first retail purchaser and each subsequent
owner during the applicable warranty time period.
What American Honda will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any part that is proven to be
defective in material or workmanship under normal use during the applicable warranty
time period. Warranty repairs and replacements will be made without charge for parts
or labor. Anything replaced under warranty becomes the property of American Honda
Motor Company, Inc. All parts replaced under warranty will be considered as part of
the original product and any warranty on those parts will expire coincident with the
original product warranty.
To Obtain Warranty Service:
You must take the Honda Harmony lawn mower, riding mower, or lawn tractor and
proof of original retail purchase date, at your expense, to any Honda Power
Equipment dealer in the United States, Puerto Rico, or the U.S. Virgin Islands who is
authorized to service that product, during the dealer’s normal business hours. If you
are unable to obtain warranty service, or are dissatisfied with the warranty service
you receive, take the following steps: First, contact the owner of the dealership
involved; normally this should resolve the problem. However, if you should require
further assistance, write or call the Power Equipment Customer Relations Department
of American Honda Motor Co., Inc. Refer to page 58 for contact information.

ADDITIONAL INFORMATION
Exclusions:
THIS WARRANTY DOES NOT EXTEND TO PARTS AFFECTED OR DAMAGED BY
ACCIDENT AND/OR COLLISION, NORMAL WEAR, FUEL CONTAMINATION, USE
IN AN APPLICATION FOR WHICH THE PRODUCT WAS NOT DESIGNED, OR
ANY OTHER MISUSE, NEGLECT, INCORPORATION OR USE OF UNSUITABLE
ATTACHMENTS OR PARTS, UNAUTHORIZED ALTERATION, OR ANY CAUSES
OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF THE PRODUCT.
MOWER BLADES AND MOWER DECK HOUSINGS, ARE SPECIFICALLY NOT
WARRANTED AGAINST DAMAGE, INCLUDING BUT NOT LIMITED TO, ABRASIVE
DAMAGE.
Disclaimer of Consequential Damage and Limitation of Implied Warranties:
AMERICAN HONDA DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR
USE OF THE PRODUCT, TRANSPORTATION, COMMERCIAL LOSS, OR ANY
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGE. ANY IMPLIED
WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED
WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above exclusions and limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

ADDITIONAL INFORMATION
Accessories, Replacement Parts, and Apparel Warranty
PRODUCTS COVERED
BY THIS WARRANTY:

LENGTH OF WARRANTY
(from date of original retail purchase)
Noncommerical / Nonrental

Commercial / Rental

Accessories

12 months

3 months

Replacement Parts

6 months

3 months

Apparel

6 months

3 months

To Qualify for this Warranty:
The accessories, replacement parts, or apparel must be purchased in the United
States, Puerto Rico, or the U.S. Virgin Islands from American Honda or a dealer
authorized by American Honda to sell those products.
You must be the first retail purchaser. This warranty is not transferable to
subsequent owners.
What American Honda will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any power equipment accessories,
replacement parts, or apparel that are proven to be defective in material or workmanship
under normal use during the applicable warranty time period. Anything replaced under
warranty becomes the property of American Honda Motor Company, Inc. All parts
replaced under warranty will be considered as part of the original product and any
warranty on those parts will expire coincident with the original product warranty.
Accessories and replacement parts, installed by a dealer who is authorized by
American Honda to sell them, will be repaired or replaced under warranty without
charge for parts or labor. If installed by anyone else, accessories and replacement
parts will be repaired or replaced under warranty without charge for parts, but any
labor charges will be the responsibility of the purchaser.
Apparel will be repaired or replaced under warranty without any charge.
To Obtain Warranty Service:
You must take the Honda Power Equipment accessory, replacement part, apparel or
the power equipment on which the accessory or replacement part is installed, and
proof of purchase, at your expense, to any Honda Power Equipment dealer in the
United States, Puerto Rico, or the U.S. Virgin Islands who is authorized to service that
product, during the dealer’s normal business hours. If you are unable to obtain
warranty service, or are dissatisfied with the warranty service you receive, take the
following steps: First, contact the owner of the dealership involved; normally this will
resolve the problem. However, if you should require further assistance, write or call
the Power Equipment Customer Relations Department of American Honda Motor Co.,
Inc. Refer to page 58 for contact information.

ADDITIONAL INFORMATION
Exclusions:
THIS WARRANTY DOES NOT EXTEND TO ACCESSORIES, PARTS, OR
APPAREL AFFECTED OR DAMAGED BY ACCIDENT AND/OR COLLISION,
NORMAL WEAR, USE IN AN APPLICATION FOR WHICH THE PRODUCT WAS
NOT DESIGNED, OR ANY OTHER MISUSE, NEGLECT, INCORPORATION OR
USE OF UNSUITABLE ATTACHMENTS OR PARTS, UNAUTHORIZED
ALTERATION, IMPROPER INSTALLATION, OR ANY CAUSES OTHER THAN
DEFECTS IN MATERIAL OR WORKMANSHIP OF THE PRODUCT.
MOWER BLADES AND MOWER DECK HOUSINGS, ARE SPECIFICALLY NOT
WARRANTED AGAINST DAMAGE, INCLUDING BUT NOT LIMITED TO, ABRASIVE
DAMAGE.
Disclaimer of Consequential Damage and Limitation of Implied Warranties:
AMERICAN HONDA DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR
USE OF THE PRODUCT, OR THE POWER EQUIPMENT ON WHICH THE
PRODUCT IS INSTALLED, TRANSPORTATION, COMMERCIAL LOSS, OR ANY
OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGE. ANY IMPLIED
WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above exclusions and limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.

ADDITIONAL INFORMATION
Emission Control System Warranty
Your new Honda Power Equipment engine complies with both the U.S. EPA and
State of California emission regulations. American Honda provides the same
emission warranty coverage for engines sold in all 50 states.
Your Warranty Rights And Obligations:
California
The California Air Resources Board and American Honda Motor Co., Inc. are pleased to
explain the emission control system warranty on your Honda Power Equipment engine.
In California, new utility and lawn and garden equipment engines must be designed, built
and equipped to meet the State’s stringent anti-smog standards.
Other States
In other areas of the United States your engine must be designed, built, and equipped
to meet the U.S. EPA Phase I Emission standard for spark-ignited engines at or
below 19 kilowatts.
All States
American Honda Motor Co., Inc. must warrant the emission control system on your
power equipment engine for the period of time listed below provided there has been
no abuse, neglect or improper maintenance of your power equipment engine. Where
a warrantable condition exists, American Honda Motor Co., Inc. will repair your power
equipment engine at no cost to you including diagnosis, parts and labor.
Your emission control system may include such parts as the carburetor or fuel
injection system, the ignition system, and catalytic converter. Also included may be
hoses, connectors and other emission-related assemblies.
Manufacturer’s Warranty Coverage:
The 1995 and later power equipment engines are warranted for two years. If any
emission-related part on your engine is defective, the part will be repaired or replaced
by American Honda Motor Co., Inc.
Owner’s Warranty Responsibility:
As the power equipment engine owner, you are responsible for the performance of the
required maintenance listed in your owner’s manual. American Honda Motor Co., Inc.
recommends that you retain all receipts covering maintenance on your power equipment
engine, but American Honda Motor Co., Inc. cannot deny warranty coverage solely for the
lack of receipts or for your failure to ensure the performance of all scheduled maintenance.
As the power equipment engine owner, you should however be aware that American
Honda Motor Co., Inc. may deny you warranty coverage if your power equipment
engine or a part has failed due to abuse, neglect, improper maintenance, or
unapproved modifications.
You are responsible for presenting your power equipment engine to a Honda Power
Equipment dealer as soon as a problem exists. The warranty repairs should be
completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you
should write or call the Honda Power Equipment Customer Relations Department.
Refer to page 58 for contact information.

ADDITIONAL INFORMATION
Warranty Coverage:
Honda power equipment engines manufactured after January 1, 1995 and sold in the
State of California, and U.S. EPA certified engines manufactured on or after
September 1, 1996 and sold in all of the United States, are covered by this warranty
for a period of two years from the date of delivery to the original retail purchaser. This
warranty is transferable to each subsequent purchaser for the duration of the
warranty period.
Warranty repairs will be made without charge for diagnosis, parts or labor. All
defective parts replaced under this warranty become the property of American Honda
Motor Co., Inc. A list of warranted parts is on the reverse side of this warranty
statement. Normal maintenance items, such as spark plugs and filters, that are on the
warranted parts list are warranted up to their required replacement interval only.
American Honda Motor Co., Inc. is also liable for damages to other engine components
caused by a failure of any warranted part during the warranty period.
Only Honda approved replacement parts may be used in the performance of any
warranty repairs and must be provided without charge to the owner. The use of
replacement parts not equivalent to the original parts may impair the effectiveness of
your engine emission control system. If such a replacement part is used in the repair
or maintenance of your engine, and an authorized Honda dealer determines it is
defective or causes a failure of a warranted part, your claim for repair of your engine
may be denied. If the part in question is not related to the reason your engine requires
repair, your claim will not be denied.
To Obtain Warranty Service:
You must take your Honda Power Equipment engine or the product on which it is
installed, along with your warranty registration card or other proof of original purchase
date, at your expense, to any Honda Power Equipment dealer who is authorized by
American Honda Motor Co., Inc. to sell and service that Honda product during his
normal business hours. Claims for repair or adjustment found to be caused solely by
defects in material or workmanship will not be denied because the engine was not
properly maintained and used.
If you are unable to obtain warranty service, or are dissatisfied with the warranty
service you received, contact the owner of the dealership involved. Normally this
should resolve your problem. However, if you require further assistance, write or call
the Power Equipment Customer Relations Department of American Honda Motor Co.,
Inc. Refer to page 58 for contact information.

ADDITIONAL INFORMATION
Exclusions:
FAILURES OTHER THAN THOSE RESULTING FROM DEFECTS IN MATERIAL OR
WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY. THIS WARRANTY DOES NOT
EXTEND TO EMISSION CONTROL SYSTEMS OR PARTS WHICH ARE AFFECTED OR
DAMAGED BY OWNER ABUSE, NEGLECT, IMPROPER MAINTENANCE, MISUSE,
MISFUELING, IMPROPER STORAGE, ACCIDENT AND/OR COLLISION, THE
INCORPORATION OF, OR ANY USE OF, ANY ADD-ON OR MODIFIED PARTS,
UNSUITABLE ATTACHMENTS, OR THE UNAUTHORIZED ALTERATION OF ANY PART.
THIS WARRANTY DOES NOT COVER REPLACEMENT OF EXPENDABLE MAINTENANCE
ITEMS MADE IN CONNECTION WITH REQUIRED MAINTENANCE SERVICES AFTER THE
ITEM’S FIRST SCHEDULED REPLACEMENT AS LISTED IN THE MAINTENANCE SECTION
OF THE PRODUCT OWNER’S MANUAL, SUCH AS: SPARK PLUGS AND FILTERS.
Disclaimer of Consequential Damage and Limitation of Implied Warranties:
AMERICAN HONDA MOTOR CO., INC. DISCLAIMS ANY RESPONSIBILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES SUCH AS LOSS OF TIME OR THE USE OF
THE POWER EQUIPMENT, OR ANY COMMERCIAL LOSS DUE TO THE FAILURE OF THE
EQUIPMENT; AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. THIS WARRANTY IS APPLICABLE ONLY WHERE THE
CALIFORNIA OR U.S. EPA EMISSION CONTROL SYSTEM WARRANTY REGULATION IS IN
EFFECT.

Emission Control System Warranty Parts:
SYSTEMS COVERED BY
THIS WARRANTY

PARTS DESCRIPTION

Fuel Metering

Carburetor assembly
Fuel injection pump
Fuel injection nozzle
Fuel regulator

Exhaust

Catalyst

Air Induction

Air filter housing
Air filter element*
Crankcase breather tube

Ignition

Flywheel magneto
Ignition pulse generator
Ignition coil assembly
Ignition control module
Spark plug cap
Spark plug*

Miscellaneous Parts

Tubing, fittings, seals, gaskets and clamps
associated with these listed systems.

* Covered up to the first required replacement only. See the Maintenance Schedule
on page 32.

ADDITIONAL INFORMATION
Manual en Español
Una versión de este manual en Español esta disponible. Favor de
ponerse en contacto con el departamento de relaciónes al cliente
a la dirección o teléfono listado abajo.
Warranty Service Information
Honda Power Equipment dealership personnel are trained
professionals. They should be able to answer any question you may
have. If you encounter a problem that your dealer does not solve to
your satisfaction, please discuss it with the dealership’s management.
The Service Manager or General Manager can help. Almost all
problems are solved in this way.
If you are dissatisfied with the decision made by the dealership’s
management, contact the Honda Power Equipment Customer
Relations Office. You can write:
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847
Or telephone:
(770) 497-6400

When you write or call, please give us this information:
• Model and serial numbers (see page 8)
• Name of the dealer who sold the lawn mower to you
• Name and address of the dealer who services your lawn mower
• Date of purchase
• Your name, address, and telephone number
• A detailed description of the problem

ADDITIONAL INFORMATION
OXYGENATED FUELS
Some conventional gasolines are being blended with alcohol or
an ether compound. These gasolines are collectively referred to
as oxygenated fuels. To meet clean air standards, some areas of
the USA and Canada use oxygenated fuels to help reduce
emissions. If you use an oxygenated fuel, be sure it is unleaded
and meets the minimum octane rating requirement. Before using
an oxygenated fuel, try to confirm the fuel’s contents. Some
states/provinces require this information to be posted on the
pump.
The following are the EPA approved percentages of oxygenates:
ETHANOL –––– (ethyl or grain alcohol) 10% by volume
You may use gasoline containing up to 10% ethanol
by volume. Gasoline containing ethanol may be
marketed under the name “Gasohol”.
MTBE ––––––– (Methyl Tertiary Butyl Ether) 15% by volume
You may use gasoline containing up to 15% MTBE
by volume.
METHANOL –– (methyl or wood alcohol) 5% by volume
You may use gasoline containing up to 5%
methanol by volume, as long as it also contains
cosolvents and corrosion inhibitors to protect the
fuel system. Gasoline containing more than 5%
methanol by volume may cause starting and/or
performance problems. It may also damage metal,
rubber, and plastic parts of your fuel system.
If you notice any undesirable operating symptoms, try another
service station, or switch to another brand of gasoline. Fuel
system damage or performance problems resulting from the use
of an oxygenated fuel containing more than the percentages of
oxygenates mentioned above are not covered under the
Distributor’s Limited Warranty (page 51).

ADDITIONAL INFORMATION
HONDA PUBLICATIONS
Two other documents are available from your Honda dealer (see
page 53). There is the Shop Manual, which covers complete
maintenance and overhaul procedures. It is intended to be used by a
skilled technician. There is also the Parts Catalog, that provides a
complete, illustrated parts lists.

ADDITIONAL INFORMATION
SPARK ARRESTER SERVICE (optional equipment)
Your lawn mower engine is not factory-equipped with a spark
arrester. In some areas, it is illegal to operate an engine without a
spark arrester. Check local laws and regulations. An optional
USDA approved spark arrester is available from an authorized
Honda servicing dealer. See page 50 for part numbers
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, then remove the bolts from the muffler
shield. Remove the muffler shield.
2. Remove the two set screws and remove the spark arrester.
3. Check for carbon deposits on the spark arrester and the exhaust
port. Brush carbon deposits away with a wire brush. Be careful to
avoid damaging the spark arrester screen.
4. Installation is the reverse of removal. Tighten all hardware securely.

SET
SCREW (2)

MUFFLER

BOLT (3)

MUFFLER
SHIELD

SPARK ARRESTER

INDEX
A

Air Cleaner Inspection...................................15 Fallen Leaves, Bagging .................................25
Air Cleaner Service .......................................35
Assembly .....................................................48 Flywheel Brake Lever:
Operation ......................................... 9 & 19
B
Frame Serial Number ......................................8
Fuel:
Blade:
Additive to Extend Storage Life ................... 43
Inspection.................................................... 12
Gasoline Recommendations ....................... 37
Installation ................................................... 38
Draining ....................................................... 44
Removal ...................................................... 38
Oxygenated fuels ........................................ 58
Refueling ..................................................... 14
C
Valve ............................................................. 9
Carburetor:
High Altitude Operation ............................... 37
G
Choke.................................................... 9 & 17
Gasoline
Recommendations
.........................37
Clogged Mower Deck ...................................25
Clothing Recommendations..........................11
H
Component Identification ................................7
Contents.........................................................3 Handlebar Folding.........................................44
Cutting Height:
High Altitude Operation .................................37
Adjustment Levers...................................10
L
Recommendations ..................................24
Cutting Width Recommendations..................24 Lawn:
Inspection Before Mowing ........................... 11
D
Mowing Tips ................................................ 23
Description of Controls ...................................9
Safe Mowing Practices................................ 22
Distributor’s Limited Warranty.......................51 Leaves, Bagging ...........................................25
Drive Clutch Lever (SD,S3D):
M
Operation ............................................10 & 20
Maintenance:
E
Blade Removal and
Emission Control Information........................30
Installation ................................................... 38
Emission Control System Warranty...............55
Engine ......................................................... 33
Engine:
Importance .................................................. 28
Fuel Recommendations .............................. 37
Safety .......................................................... 29
Maintenance................................................ 33
Schedule ..................................................... 32
Oil Change .................................................. 33
Specifications .............................................. 47
Oil Level ...................................................... 13 Mower Deck Clogging ..................................25
Oil Recommendations................................. 34
Refueling ..................................................... 14 Mowing:
Serial Number ............................................... 8
Around Obstacles, Gravel,
Specifications .............................................. 71
Objects ........................................................ 22
Starting........................................................ 17
Dry & Wet Grass ......................................... 25
Stopping ...................................................... 21
Fallen Leaves .............................................. 25
Patterns ....................................................... 26
Troubleshooting .......................................... 59
Slopes ......................................................... 22
Tips.............................................................. 23
When to Mow .............................................. 24

INDEX
O

Oil (for engine):
Change ........................................................ 33
Level Check................................................. 13
Recommendations....................................... 34
Operating the Controls for
Mowing ...................................................... 19
Oxygenated fuels ......................................... 58

Throttle Lever:
Operation .............................................. 9 & 19
Transmission (SD, S3D):
Drive Clutch Lever
Operation ............................................ 10 & 20
Transporting .................................................37
Troubleshooting:
Engine Problems .........................................40
P
Mowing and Bagging
Problems......................................................41
Pre-Operation Check:
Vibration Problems ......................................41
Lawn ............................................................ 11
Mower.......................................................... 12 Tuneup Specifications...................................47
Publications................................................. 59

S
Safety:
Important Message to Parents .................... 5
Safe Mowing Practices ................................ 22
Important Safety Information ....................... 4
Safety Label Locations ................................ 6
Safety Message Definitions ......................... 2
Serial Numbers .............................................. 8
Shift lever (S3D)
description ................................................... 10
usage........................................................... 20
Spark Arrester Service
(optional equipment).................................... 60
Spark Plug Recommendations &
Service ........................................................ 36
Specifications:
Capacities.................................................... 45
Dimensions.................................................. 45
Engine Design and
Performance................................................ 45
Maintenance ................................................ 47
Transmission Design and
Performance................................................ 45
Tuneup ........................................................ 47
Weights........................................................ 45
Starting the Engine....................................... 17
Stopping the Engine ..................................... 21
Storage:
Precautions.................................................. 45
Preparation .................................................. 42
Removing From Storage ............................. 45

Warranty
Accessories, Replacement
Parts, and Apparel.......................................53
Distributor’s Limited .....................................51
Emission Control System.............................55
Service Information......................................58
Washing the Mower ......................................42

QUICK REFERENCE INFORMATION
Fuel

type

Unleaded gasoline with a pump octane of 86 or

capacity

higher (page 38).
0.29 U.S. gallon (1.1 liter)

Engine Oil

type
capacity

SAE 10W-30, API SH or SH (page 35)
0.58 U.S. quart (0.55 liter)

Spark Plug

type

Regular: NGK - BP6ES
DENSO - W20EP-U
Resistor: NGK BPR6ES
DENSO - W20EPS-U
0.028 ~ 0.031 in (0.7 ~ 0.8 mm)

WARNING:
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.

gap

Blade Bolts

torque

36 ~ 43 ft-lb (5.0 ~ 6.0 kg-m, 49 ~ 59 N•m)
page 39

Carburetor

idle speed

1,550 ~ 1,850 rpm (see shop manual)

Maintenance

before each
use
subsequent

Check blade and bolt tightness (page 12, 39)
See the Maintenance Schedule (page 33)

Owner's Manual
Rotary Mower
HRS216PDA • HRS216SDA
HRR216PDA • HRR216SDA • HRR216S3DA
HRT216SDA • HRT216S3DA

K1
EM
31VG4610
00X31-VG4-6100

Printed on
Recycled Paper

POM52774-A

¿Necesita un manual en Español? Vea a la página 58.

600.2001.06
PRINTED IN U.S.A.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:03:28 21:21:09Z
Modify Date                     : 2003:03:26 13:38:24-05:00
Page Count                      : 67
Creation Date                   : 2002:03:28 21:21:09Z
Mod Date                        : 2003:03:26 13:38:24-05:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : hailing li
Metadata Date                   : 2003:03:26 13:38:24-05:00
Creator                         : hailing li
Title                           : INTRO.CHP:Corel VENTURA
Page Mode                       : UseOutlines
Page Layout                     : SinglePage
Has XFA                         : No

EXIF Metadata provided by EXIF.tools

Honda Hrt216S3Da Mczg 6300001 Through 6699999 Owners Manual INTRO.CHP

Honda-Hrr216S3Da-Users-Manual-657330 honda-hrr216s3da-users-manual-657330

!! 31VG4610 Mb Quart Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

Preview ! 31VG4610 Mb Quart Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

Navigation menu

Versions of this User Manual:

Views

Navigation