Honda Hrx217Vka Ma Ga 2200001 Through 9999999 Owners Manual

HRX217VKA 00X31VH7N030

2014-11-13

: Honda Honda-Hrx217Vka-Ma-Ga-2200001-Through-9999999-Owners-Manual-108623 honda-hrx217vka-ma-ga-2200001-through-9999999-owners-manual-108623 honda pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

OWNER’S MANUAL
HRX217VKA
LAWN MOWER

Before operating the mower for the first time, please read this
Owner’s Manual. Even if you have operated other mowers,
take time to become familiar with how this mower works and
practice in a safe area until you build up your skills.

Click to Save As

QUICK FIND
Air Filter.................................................. 12
Blades .................................................... 11
Contact Honda ....................................... 20
Cutting Height .......................................... 6

Find a Dealer.......................................... 20
Fuel .......................................................... 7
Fuel System Maintenance...................... 19
Maintenance Schedule........................... 10

Oil Change..............................................12
Oil Level Check.........................................6
Spark Plug ..............................................13
Warranty Coverage.................................21

CONTENTS
FOR YOUR SAFETY .............................. 2
PARTS AND CONTROLS ...................... 3
INITIAL MOWER SETUP........................ 3
Adjust the Handlebar........................... 3
Assemble the Grass Bag..................... 4
BEFORE USING YOUR LAWN MOWER
Check Your Mower..............................
Check Your Mowing Area....................
Clip Director®......................................
Cutting Height Adjustment...................
Check the Oil Level .............................
Add Fuel ..............................................

4
4
5
6
6
7

OPERATION
Safe Mowing Practices........................
Operating the Controls ........................
Starting the Engine..............................
Stopping the Engine ............................

7
8
9
9

SERVICING YOUR MOWER
Maintenance Safety............................. 9

Maintenance Schedule......................
Blade Inspection................................
Blade Replacement ...........................
Oil Change ........................................
Air Filter .............................................
Spark Plug.........................................
Spark Arrester (optional part) ............
Blade Control Check .........................
Smart Drive Cable Check/Adjustment

10
11
11
12
12
13
13
14
14

TRANSPORTING ................................. 14
STORAGE
Fuel ...................................................
Oil ......................................................
Cleaning ............................................
Storage Location ...............................
Handlebar..........................................
Removing From Storage ...................

14
14
15
15
15
15

TROUBLESHOOTING
Engine Will Not Start ......................... 16

Loss of Power....................................... 16
Vibration ............................................... 16
Mowing and Bagging Problems............ 16
TECHNICAL INFORMATION
Serial Number Locations ......................
High Altitude Operation ........................
Emission Control System .....................
Air Index ...............................................
Specifications .......................................

FUEL SYSTEM MAINTENANCE............. 19
CUSTOMER INFORMATION
Parts, Accessories, and Service Items.
Dealer Locator Information...................
How to Contact Honda .........................
Honda Publications ..............................

20
20
20
20

DISTRIBUTOR’S LIMITED WARRANTY. 21
EMISSION SYSTEM WARRANTY .......... 22
PRODUCT REGISTRATION ................... 23

QUESTIONS?
Contact your Honda dealer.
There is a dealer locator at
http://powerequipment.honda.com
00X31VH7 N030

17
17
17
18
18

WELCOME



Congratulations on your selection of a Honda lawn mower! We are
certain you will be pleased with your purchase of one of the finest
lawn mowers on the market. We want to help you get the best results
from your new mower and to operate it safely. This manual contains
information on how to do that; please read it carefully.
When your mower needs scheduled maintenance, keep in mind that
Honda Power Equipment servicing dealership personnel are specially
trained in servicing Honda lawn mowers and are supported by the
parts and service divisions of American Honda.
Please read the DISTRIBUTOR’S LIMITED WARRANTY on page 21
and the EMISSION CONTROL SYSTEM WARRANTY on page 22 to
fully understand what is covered by warranty and your responsibilities
of ownership.

FOR YOUR SAFETY
Your safety and the safety of others are very important. We have
provided important safety messages in this manual and on the mower.
This information alerts you to potential hazards that could hurt you or
others. Please read these messages carefully.
Of course, it is not practical or possible to warn you about all the
hazards associated with operating or maintaining a lawn mower. You
must use your own good judgment.

Safety Instructions
You will find important safety information in a variety of forms:
• Safety Labels – on the lawn mower.
• Instructions – how to use this mower correctly and safely.

• Safety Messages – preceded by a safety alert  symbol and one
of three signal words: DANGER, WARNING, or CAUTION.
Each message tells you what the hazard is, what can happen, and
what you can do to avoid or reduce injury.
These signal words mean:



DANGER

You WILL be KILLED or
SERIOUSLY HURT if you don't
follow instructions.



WARNING

You CAN be KILLED or
SERIOUSLY HURT if you don't
follow instructions.



CAUTION

You CAN be HURT if you don't
follow instructions.

• Damage Prevention Messages – You will also see other important
messages that are preceded by the word NOTICE. This word
means:
Your engine or other property can be damaged
NOTICE
if you don’t follow instructions.

WARNING



The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or reproductive harm.

Important Message to Parents
The safety of your children is very important to Honda. Lawn mowers
are tools, not toys. As with any equipment, bad judgments can result
in serious injuries. Your child must be big enough, strong enough, and
have the coordination necessary to comfortably reach and operate the
controls. Anyone who takes unnecessary risks and doesn’t obey rules
should not operate this lawn mower.

Safety Label Locations
These labels warn you of potential hazards that can cause serious
injury. Read them carefully. If a label comes off or becomes hard to
read, contact an authorized Honda servicing dealer for a replacement.

PARTS AND CONTROLS
BLADE CONTROL
LEVER (P. 8)

INITIAL MOWER SETUP
List of Parts
With help of an assistant, carefully remove the mower and loose parts
from the carton and compare the loose parts against the following list.
Contact the authorized Honda dealer from whom you purchased the
mower if any of the loose parts shown are not included with the
mower.

REAR
DISCHARGE
GUARD (P. 5)

FUEL TANK CAP (P. 7)

Ref. No.

RECOIL
STARTER
GRIP (P. 9)

Description

Qty.



Grass bag frame



Grass bag



Engine oil and owner’s manual

HANDLEBAR
ADJUST KNOB (2)



(P. 3)
OIL FILLER CAP

(P. 4)

MUFFLER

(P. 13)
SMART DRIVE
CONTROL (P. 8)





HANDLEBAR

Adjust the Handlebar

CUTTING HEIGHT
ADJUSTMENT
LEVER (4) (P. 6)

1. With the handlebar adjust knobs in the unlocked position, pull the
blade control lever against the handlebar, and then raise the
handlebar into the mowing position .

GRASS BAG

(P. 4)
CLIP DIRECTOR®
KNOB (P. 5)

SPARK PLUG
CAP (P. 13)
AIR FILTER
CARBURETOR

(P. 12)

FUEL VALVE ON

HANDLEBAR ADJUST
KNOBS

FUEL VALVE OFF

BLADE CONTROL
LEVER

UNLOCKED

LOCKED

2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs to the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock
position, making sure both sides are positioned at the same
height.
4. Remove all the cardboard from around the handlebar.

Add Engine Oil

Before Using Your Lawn Mower

The mower is shipped WITHOUT
OIL in the engine. Remove the oil
filler cap/dipstick and add the
entire contents of the included
bottle of oil into the oil filler
opening.

All mower operators must read the following sections:
•
•
•
•

All Honda engines are run at the
factory prior to packaging. Most of
the oil is removed prior to
shipment; however, some oil
remains in the engine. The amount
of oil left in the engine varies.

BEFORE EACH OPERATION
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.

If you don’t use the supplied oil, add enough SAE 10W-30 API service
category SJ or later oil to bring the oil level between the upper and
lower limit marks on the dipstick—without screwing the dipstick in
(approximately 12 to 13.5 ounces is required) See page 6.
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may get transferred to the air cleaner housing and air filter.
An indication of overfilling is white or blue smoke coming from the
muffler when the engine is running.
After filling the engine with oil, screw the filler/cap dipstick in and
remove the hang tag near the recoil starter grip that says “The engine
has no oil.”

Assemble the Grass Bag
1. Turn the grass bag right-side out.

3. Install the assembled frame into the fabric grass bag, keeping the
grass bag handle exposed.

FABRIC GRASS BAG

SUPPORT LEGS
EYELETS

TOP PLASTIC CLIP
(Route under the
handle and frame)

PLASTIC CLIP [6]

Please Register Your Mower
Please take a few minutes and register your purchase with Honda.
You can register by completing and mailing the registration card on
the back cover of this book or going online to
http://powerequipment.honda.com and clicking on Product
Registration.
4

Read and understand this manual. Know what the controls do and
how to operate them.
Familiarize yourself with the lawn mower and its operation before you
begin using it. Know how to quickly shut off the lawn mower in case of
an emergency.

Check Your Mower
For your safety, and to maximize the service life of your lawn mower,
it is very important to take a few moments before you operate the lawn
mower to check its condition. Be sure to take care of any problem you
find, or have your servicing dealer correct it, before you operate the
lawn mower.



2. Pull the frame support legs outward and slide them into the
eyelets as shown.

GRASS BAG HANDLE

FOR YOUR SAFETY (page 2)
BEFORE EACH OPERATION (page 4)
OPERATION (page 7)
MAINTENANCE SCHEDULE (page 10)

WARNING

Improperly maintaining this lawn mower, or failing to correct a
problem before operation, could cause a malfunction in which
you could be seriously injured.
Always perform a pre-operation inspection before each
operation, and correct any problem.
• Make sure the lawn mower is on a level surface.
• Look around and underneath the lawn mower for signs of oil or
gasoline leaks.
• Look for signs of damage.
• Check each control for proper operation.
• Check the blades for wear. Replace as necessary (page 11).
• Check that the blade bolts are tight (page 11).
• Check that all nuts, bolts, and screws are tightened.
• Check the air filter (page 12) and oil level (page 6).
• Check the fuel level (page 7). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.

Check Your Mowing Area
For your safety and the safety of others, always inspect the area
before operating the lawn mower.
Anything that can be picked up by the blades and thrown is a potential
hazard to you and others. Look for things like stones, sticks, nails, and
wire, and remove them from the lawn area.
People and animals near the lawn area can move into your lawn
mower’s path or into a position where they could be struck by thrown
objects. Clear the area of pets and people, especially children. Their
safety is your responsibility.
Check the condition of the grass. Adjust your lawn mower ground
speed and mowing swath accordingly.

Clip Director®
The Clip Director can be adjusted to any one of the ten positions to
achieve the desired mowing results (bag, bag and mulch, or mulch).
To adjust the Clip Director knob, pull the knob downward and towards
the rear of the mower. The knob adjusts a sliding door from the fully
open BAG position to the fully closed MULCH position.

FULL BAGGING OR
REAR DISCHARGE

FULL MULCHING

KNOB (BAG POSITION)

KNOB (MULCH POSITION)

Some grass accumulation in the discharge opening is normal when
the Clip Director is fully closed in the MULCH position. To remove this
grass, close the discharge guard, fully open the Clip Director in the
BAG position, engage the blade control lever, and start the engine.
If a high resistance is noticed when moving the Clip Director knob
from side-to-side, excessive grass may have built up on top of the
sliding door.
SLIDING DOOR
(fully open)

CLIP DIRECTOR KNOB

SLIDING DOOR
(fully closed)

Rear Discharge
To discharge clippings to the rear, remove the grass bag and position
the Clip Director knob in the BAG range. Maximum rear discharge will
occur when the Clip Director knob is all the way to the left (BAG)
position. As the Clip Director knob is moved toward the right (MULCH)
position, less grass will be discharged through the rear discharge
guard.

SLIDING DOOR
(fully closed)

DISCHARGE
GUARD

Important Safety Precaution
Always release the blade control lever and disconnect the spark plug
cap (page 13) before lifting the discharge guard to view or clean
around the sliding door. This will prevent contact with the rotating
blades and prevent objects from being thrown into the discharge area.

Sliding Door Position
The sliding door can be positioned to produce different mowing
results. If the preferred sliding door position is unknown, install the
grass bag and begin mowing with the Clip Director knob all the way to
the BAG position. Check the appearance of the lawn. As the knob is
moved towards the MULCH position, more grass will be recycled back
into the lawn. Adjust the Clip Director knob until the desired result is
achieved.

CLIP DIRECTOR KNOB

Fallen Leaves
Use the Clip Director to shred and collect fallen leaves for disposal.
Set the front wheels so they are one or two settings higher than the
rear. Set the Clip Director in position #9 (not quite full mulching), and
adjust the setting from this point for best results.

Rear Shield
During normal use the rear shield is subject to deterioration and wear.
Remove the grass bag and raise the discharge guard to check the
rear shield for cracks or tears. If the rear shield is excessively worn,
have it replaced by your authorized Honda servicing dealer.

BAGGING OR REAR DISCHARGE
AND SOME MULCHING

SLIDING DOOR
(50% open)

DISCHARGE GUARD

REAR SHIELD

Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the
bag fabric, which traps the grass clippings. Always empty the grass
bag before it becomes filled to the limit of its capacity. Bagging
performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
You can leave the grass bag on the mower during mowing, even
when full mulching is selected.

To adjust cutting height,
pull each adjustment lever
toward the wheel, and
move it into another notch.

ADJUSTMENT LEVERS

Move all four adjustment
levers to the same
position, forward for tall
grass and rearward for
short grass.

To minimize dust and fine particles from passing through the grass
bag fabric, it is best to mow grass in the morning when the grass is
damp.

Inspection

THE CUTTING HEIGHT FIGURES ARE APPROXIMATE.

During use, the grass bag material is subject to normal wear and tear.



3/4 in (20 mm)
1-1/4 in (32 mm)
2 in (46 mm)
2-1/2 in (62 mm)
3 in (75 mm)
3-1/2 in (88 mm)
4 in (100 mm)

CAUTION

An excessively worn grass bag may allow objects to be thrown
toward the operator.

Replace a worn grass bag to prevent possible injury.

Installation

•
3

DISCHARGE GUARD

•

GRASS BAG
HANDLE

1. Raise the
discharge guard
and hook the
grass bag onto
the mower deck
as shown.

FORWARD
DIRECTION

Grass bag replacement is explained on page 12.

BAG

Clean any grass
clippings from the
hook channel.
2. Release the
discharge guard
to secure the
grass bag.

Removal
1. Raise the discharge
guard, grasp the
grass bag handle,
and remove the
grass bag.
2. Release the discharge guard.
3. When the grass bag is clear of the discharge guard, you can lift it
through the handlebar opening or remove it to the rear of the
mower below the handlebar.

Cutting Height Adjustment
Each wheel of the mower can be adjusted to one of seven settings.
The actual height of cut grass will vary with lawn and soil conditions.
Be sure the engine is not running when adjusting the cutting height.

If you are not sure what cutting height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Then readjust the cutting height if necessary.

Check the Oil Level
1. Unscrew and remove the filler cap/dipstick and wipe it clean.
2. Insert and remove the
dipstick without screwing
it into the filler neck.
Check the oil level shown
on the dipstick.
3. If the oil level is low, add oil
to reach the upper limit
mark on the dipstick.
Do not overfill. If the engine
is overfilled, the excess oil
may get transferred to the
air cleaner housing and air
filter. An indication of
overfilling is white or blue
smoke coming from the
muffler when the engine is
running.
Use 10W-30 API Service
category SJ oil for normal
conditions. For additional oil
recommendations, see
page 12.

FILLER CAP
/DIPSTICK

UPPER
LIMIT
LOWER
LIMIT

NOTICE
Running the engine with a low oil level can cause engine
damage.
4. Screw in the filler cap/dipstick securely.
6

Add Fuel
This engine is certified to operate on regular gasoline with a pump
octane rating of 86 or higher.
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.
You may use regular unleaded gasoline containing no more than 10%
ethanol (E10) or 5% methanol by volume. In addition, methanol must
contain cosolvents and corrosion inhibitors.

OPERATION
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your mower’s exhaust contains poisonous
carbon monoxide gas, which can collect rapidly in an enclosed area
and cause illness or death.



WARNING

Use of fuels with content of ethanol or methanol greater than shown
above may cause starting and/or performance problems. It may also
damage metal, rubber, and plastic parts of the fuel system.

Exhaust contains poisonous carbon monoxide gas that can
build up to dangerous levels in closed areas. Breathing carbon
monoxide can cause unconsciousness or death.

Engine damage or performance problems that result form using a fuel
with percentages of ethanol or methanol greater than shown above
are not covered under warranty.

Never run the lawn mower in a closed, or even partially closed
area where people may be present.



You might hear a clicking noise as you push or pull the lawn mower
without engaging the Smart Drive. This is normal; moving the mower
without using the Smart Drive control will not damage the mower.

WARNING

Gasoline is highly flammable and explosive, and you can be
burned or seriously injured when refueling.
• Stop the engine and keep heat, sparks, and flame away.
• Refuel only outdoors.
• Wipe up spills immediately.
If your equipment will be used on an infrequent or intermittent basis,
(more than 4 weeks before next use), refer to “FUEL SYSTEM
MAINTENANCE” on page 19 for information regarding fuel
deterioration.
1. Remove the fuel tank cap.
2. Add fuel to the bottom of the red fuel level gauge in the neck of
the fuel tank. Do not overfill. Wipe up spilled fuel before starting
the engine.

Safe Mowing Practices
Most injuries and property damage with walk-behind mowers can be
prevented if you follow all instructions in this manual and on the
mower. The most common hazards are discussed below, along with
the best way to protect yourself and others.

Avoid Rotating Blades
Rotating blades can cause serious cuts and even amputate fingers,
hands, toes, or feet. Keep away from the mower deck whenever the
engine is running. If you need to adjust the cutting height or work
around the deck for any other reason, always shut off the engine.
Wear heavy gloves and disconnect the spark plug cap when you need
to clean the mower deck or handle the blades.


RED FUEL
LEVEL GAUGE

WARNING

The blades are sharp and spin at high speed. A spinning blade
can cut you severely and can amputate fingers and toes.
• Wear protective footwear.
• Keep your hands and feet away from the mower deck while
the engine is running.
• Stop the engine before performing any adjustment,
inspection, or maintenance.

MAXIMUM
FUEL LEVEL

3. Tighten the fuel tank cap until it clicks.
Move the mower at least 10 feet (3 meters) away from the fueling
source and site before starting the engine.
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel
when filling your fuel tank. Damage caused by spilled fuel is not
covered by the DISTRIBUTOR’S LIMITED WARRANTY
(page 21).

Clear Mowing Area
Mower blades can throw rocks and other objects with enough force to
cause serious injury. Before mowing, carefully inspect the area and
remove all sticks, stones, pieces of wire, and other loose objects.
Never operate the blades over gravel.
NOTICE
Striking objects with the spinning blades can cause severe engine
damage, which is not covered by the Distributor’s Limited Warranty.

Keep Shields In Place
Guards and shields are designed to protect you from being hit by
thrown objects and from hot engine parts and moving components.
For your safety and the safety of others, keep all shields in place
when the engine is running.

Operating the Controls

Refuel With Care
Gasoline is extremely flammable and gasoline vapor can explode.
Refuel only outdoors, in a well-ventilated area, with the engine OFF.
Never smoke near gasoline, and keep other flames and sparks away.
Always store gasoline in an approved container.

Wear Protective Clothing
Wearing protective clothing will reduce your risk of injury. Long pants
and eye protection reduce the risk of injuries from thrown objects.
Sturdy shoes with aggressive soles will help protect your feet and give
you better traction on slopes or uneven ground.

Stop the Engine When Not Mowing
If you need to leave the mower for any reason, even just to inspect the
lawn ahead, stop the engine by releasing the blade control lever.

Avoid Slopes
Avoid steep slopes of more than 20°.
Mow across slopes, not up and down. Be
careful when changing direction. Mowing
on a slope when the grass is damp or wet
could cause you to slip, fall, and lose
control of the mower.
NOTICE
Mowing on steep slopes can starve the
engine of oil, causing engine damage that
is not covered by the Distributor’s Limited
Warranty.
Keep all four wheels on the ground, and be careful to avoid losing
your footing and your control of the mower. Keep a firm grip on the
handlebar, and walk, never run, with the mower. Be very careful when
mowing uneven or rough ground.
If stuck, do not kick or shove the mower with your foot. Use the
handlebar to control the mower.

Avoid Obstacles
Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the blade control
lever to stop the blades before reaching areas with gravel, loose
stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the
surface of the lawn such as sprinkler heads, paving, edging, raised
tree roots, etc.
If the blade hits something, or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (page 11). Striking objects may damage the blades, bend the
crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.



WARNING

A worn, cracked, or damaged blade can break, and pieces of
the damaged blade can become dangerous projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly (see page 11), and do not operate
the mower with a worn or damaged blade.
The DISTRIBUTOR’S LIMITED WARRANTY (page 21) does not
cover parts damaged by accidental impact collision.
8

Blade Control Lever
The blade control lever must be
pulled back against the
handlebar to start and run the
engine. The blades start to
rotate when the lever is pulled
back against the handlebar and
the recoil starter grip is pulled.

BLADE CONTROL LEVER

Continue to hold the lever fully
against the handlebar. This will
keep the engine and blades
rotating smoothly and prevent
premature wear to the flywheel
brake system.
Release the blade control lever to stop the engine and stop blade
rotation whenever you need to leave the mower.

Smart Drive Control
With the engine running
and the blades rotating,
slowly push the Smart
Drive control to propel the
mower forward.

To prevent thumb fatigue, hold the
Smart Dirve control as shown.

Ground speed will increase
as more pressure is applied
to the Smart Drive control.
After maximum ground
speed is obtained, applying
additional pressure will not
SMART DRIVE CONTROL
further increase ground
speed. Apply only enough
pressure to achieve the desired speed.
2

BLADE
CONTROL

SMART
DRIVE

CONTROL

ADJUST
POSITION

Release the Smart Drive control to disengage the drive when mowing
around trees and other obstacles. Push the mower around obstacles
for better directional control.
Ground speed varies with terrain, grass height, slope, and grass bag
weight. Moving the Smart Drive control allows you to maintain the
desired ground speed under constantly changing mowing conditions.
Release the Smart Drive control to disengage (stop) the rear wheels.

Adjusting the Smart Drive Control
The Smart Drive control can
be adjusted up or down into
any one of five positions for
operator comfort.
Do not attempt to adjust the
position of the Smart Drive
control while the mower is in
motion.
Slide the multi-position
MULTI-POSITION
adjuster to the left to unlock
ADJUSTER
the control, move the Smart
Drive control up or down into the most comfortable position, and then
release the multi-position adjuster and allow it to engage.

Starting the Engine
The blades turn when you start the engine. Start the engine in a clear
or mowed area where the blades can turn freely.
1. Turn the fuel valve to the ON position (page 3).
2. Pull back on the blade control
lever and hold it against the
handlebar.

Proper maintenance is essential for safe, economical, and
trouble-free operation. It also helps reduce air pollution.



WARNING

Improper maintenance, or failure to correct a problem before
operation, can cause a malfunction in which you can be
seriously hurt or killed.

3. Pull the starter grip lightly until
you feel resistance, and then
pull briskly. Return the starter
grip gently.
To ensure easy restarting and
maximum performance from the
Auto Choke System™, allow
the engine to run for at least
three minutes after starting a
cold engine before stopping the
engine. This minimum run time
will be longer if the temperature
is below 70°F (21°C).

SERVICING YOUR MOWER

Always follow the inspection and maintenance
recommendations and schedules in this owner’s manual.
BLADE CONTROL LEVER

Continue to hold the blade
control lever against the
handlebar; the engine stops
when the blade control lever is
released.

Stopping the Engine
1. Release the blade control lever to stop the engine.
2. When you finish mowing, turn the fuel valve OFF.
3. If your mower will not be used for 3 to 4 weeks, we recommend
running the engine’s carburetor out of fuel. You can do this by
leaving the fuel valve OFF, restarting the engine and running it
until it stops. See “FUEL SYSTEM MAINTENANCE” on page 19
if you don’t plan to use your mower for a month or more.
4. Clean your mower after each mowing; refer to “Cleaning” on
page 15.

To help you properly care for your mower, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult or require special tools are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high load, high temperature, or unusually wet or dusty conditions,
consult your servicing dealer for recommendations applicable to your
individual needs and use.
Remember that an authorized Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it. To ensure
the best quality and reliability, use only new, Honda Genuine parts or
their equivalents for repair and replacement.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine repair
establishment or individual, using parts that are “certified” to
EPA standards.

Maintenance Safety
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.



WARNING

Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this manual.

Safety Precautions
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate
the engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
9

Maintenance Schedule
Item

Action

Before
each use

5 hours
of use
or first
month

First
25 hours
of use

50 hours
of use
or every
6 months

100 hours
of use
or every
year

150 hours
of use
or every
two years

See page

Rear shield

Check

Blades

Inspect

Blade mounting bolts

Inspect

Engine oil

Check

Change
Air filter

Check

O (2)

O (1)

Clean

O (1)

Replace
Grass bag

Check

Blade control operation

Check

Spark plug

Check

O
O

Replace

Spark arrester (optional
part)

Clean

Smart Drive cable

Adjust

Fuel tank/filter

Clean

O (3)

—

Flywheel brake pad

Check

O (3)

—

Valve clearance

Checkadjust

O (3)

—

Pinion gears

Grease

O (3)

—

Rear wheel adjuster
bushings

Inspectgrease

Fuel lines

Check

O (3)
Check every 2 years and replace if necessary (3)

—
—

(1) Service more frequently when used in dusty areas.
(2) Change engine oil every 25 hours when used under heavy load or in high outside air temperatures.
(3) These items should be serviced by an authorized Honda servicing dealer unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures. See “Honda Publications” on page 20 for ordering information.
Failure to follow this maintenance schedule could result in non-warrantable failures.

Blade Inspection

Blade Replacement

1. Turn the fuel valve OFF (page 3).
2. Disconnect the spark plug cap from the spark plug (page 13).
3. Tilt the mower to the right side so that the fuel cap side is up. This
will help to prevent fuel leakage and hard starting due to
carburetor flooding.
4. Inspect the blades for damage, cracks, and excessive rust or
corrosion.

1. Remove the two blade bolts with a 14 mm (6 point) socket
wrench. Use a wooden block to prevent the blades from turning
when removing the bolts. Remove the blades.
UPPER BLADE
LOWER
BLADE
BLADE
BOLT (2)

BLADE BOLTS

SPECIAL
WASHER (2)

BLADES

2. Clean dirt and grass from around the blade mounting area.



3. Install the sharpened or replacement blades using the two blade
bolts and special washers as shown below.

WARNING



WARNING

Operating the mower with only one blade will result in an
improperly seated blade that can be thrown from the mower
and seriously hurt or kill someone.
Always install both blades as a set.

A dull blade can be sharpened, but a blade that is excessively worn,
bent, cracked, or otherwise damaged must be replaced.

The blade bolts and washers are specially designed for this
application. When replacing bolts and washers, use only Honda
Genuine replacement parts.
UPPER BLADE

NORMAL
TRAILING EDGE

LOWER BLADE

EXCESSIVELY WORN
TRAILING EDGE
NORMAL

WORN

BENT

BLADE BOLT [2]
AND WASHER [2]

CRACKED

SPECIAL WASHER
DIRECTION

If a blade is bent, take the lawn mower to an authorized Honda
servicing dealer for inspection.

Blade Mounting Bolts Inspection
Inspect the blade bolts for any signs of damage
or looseness. If they are damaged, they must
be replaced.
If they appear loose, a torque wrench must be
used to accurately tighten the blade bolts to the
required torque. If you do not have a torque
wrench, take your lawn mower to an authorized
dealer to have the bolts replaced or tightened.
Use only Honda Genuine blade bolts and
special washers, since they are specifically
designed for this purpose. Replacement part
numbers are on page 20.

INSPECT WASHERS
AND BOLT HEADS
FOR LOOSENESS
AND DAMAGE

4. Tighten the blade bolts with a torque wrench to the specified
torque. Use a wooden block to prevent the blades from turning
when tightening the bolts, as shown on page 12.
Blade bolt torque: 36 ~ 43 ft-lb (49 ~ 59 N·m)
If you do not have a torque wrench, have an authorized Honda
servicing dealer tighten the blade bolts.



WARNING

If the blade bolts are not torqued properly, the blades could
loosen and be thrown from the mower and seriously hurt or kill
someone.
Ensure the blade bolts are torqued properly.

BLADES

Engine Oil Recommendations
Oil is a major factor affecting performance and service life. Always
change the oil in accordance with the MAINTENANCE SCHEDULE
(page 10).
Recommended oil for general use: SAE 10W-30
Other viscosities shown in the chart may be used when the average
temperature in your area is within the recommended range.
30

TORQUE
WRENCH

5W-30 • 10W-30
0

TORQUE:
36 ~ 43 ft-lb
(49 ~ 59 N•m)

Change the oil after the first month or 5 hours of use. Thereafter,
change the oil every 6 months or 50 hours of use. Change the oil
more frequently when used under heavy load or high outdoor
temperatures. See “Engine Oil Recommendations” on this page for
recommended oil properties.
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
To reduce the chance of scratching the side of the mower deck or
wheels when tipping, place a piece of cardboard or drop cloth on the
ground. The use of a commercially available siphon pump will save
time and make the oil change easier.
1. Turn the fuel valve OFF (page 3). This will reduce the possibility
of fuel leakage.
2. Wipe the oil filler area clean, and then remove the oil filler
cap/dipstick.
3. Place a suitable container next
to the mower to catch the used
oil, and then tilt the mower on
its right side.
The used oil will drain through
the filler neck. Allow the oil to
drain completely.
After draining, take the oil to
your local recycling center or
service station. Do not throw it
in the trash, pour it on the
ground, or pour it down a drain.

The SAE oil viscosity and service category are in the API label on the
oil container. Honda recommends API service category SJ or later oil.

Air Filter
Clean the air filter after the first 25 hours of use. Thereafter, clean the
filter every 6 months or 50 hours of use. Clean the filter more often
when used in dusty areas. Replace the filter every 2 years or 150
hours of use.
A properly maintained air filter will help prevent dirt from entering your
engine. Dirt entering the carburetor can be drawn into small passages
in the carburetor and cause premature engine wear. These small
passages can become blocked, causing starting or running problems.
NOTICE
Operating the engine without an air filter, with a damaged air filter, or
with an improperly installed air filter cover will allow dirt to enter the
engine, causing rapid engine wear. This type of damage is not
covered by the DISTRIBUTOR’S LIMITED WARRANTY (page 21).
We recommend the use of a Honda Genuine air filter to ensure it
seals and performs as designed. Using a non-Honda air filter can
result in dirt bypassing the filter, causing damage to the engine or fuel
system.
1. Press down on the cover tabs and remove the cover.
2. Remove the filter from the air cleaner housing.
AIR CLEANER
HOUSING
FILTER
COVER
TABS

4. Fill with the recommended oil.
Do not overfill. Allow a couple
of minutes for the oil to settle in
the engine, and then measure
the oil level (page 6).
Refill amount:
12.0 ~ 13.5 oz.
(0.35 ~ 0.40 L)
NOTICE
Using nondetergent oil can
shorten the engine’s service
life, and using 2-stroke oil can damage the engine.

80 100°F

-20 -10 0 10 20 30 40°C
OUTSIDE AIR TEMPERATURE

WOODEN
BLOCK

Oil Change

COVER

3. Inspect the filter; replace if damaged.
4. Clean the filter by tapping it several times on a hard surface to
remove dirt, or blow compressed air (not exceeding 30 psi
[207 kPa]) through the air filter from the inside. Never try to brush
off dirt; brushing will force dirt into the fibers.
5. Wipe dirt from the inside of the air cleaner housing and cover
using a moist rag. Be careful to prevent dirt from entering the air
duct that leads to the carburetor.
6. Reinstall the filter and cover. Be sure both tabs are fully locked in
place.

Spark Plug

Spark Arrester (optional part)

Replace the spark plug every 2 years or after 150 hours of use.

The spark arrester must be serviced every 100 hours to keep it
functioning as designed.

Recommended Spark Plug: NGK - BPR5ES
NOTICE
An incorrect spark plug can cause engine damage.
For good performance, the spark plug must be properly gapped and
free of deposits.
1. Allow the engine to cool,
disconnect the spark plug
cap, and remove any dirt
from around the spark
plug area.

SPARK PLUG

4. Measure the spark plug
electrode gap with a
suitable gauge.

1. Allow the engine to cool and disconnect the spark plug cap.
2. Remove the three flange bolts and the heat shield. Remove the
setscrew and the spark arrester from the muffler.
3. Check for carbon deposits on the spark arrester and the exhaust
port. Use a brush to remove any carbon deposits from the
screen. Replace the screen if it is torn or damaged.

2. Remove the spark plug
with a 13/16 in (21 mm)
spark plug wrench.
3. Inspect the spark plug.
Replace it if the
electrodes are worn, or if
the insulator is cracked or
chipped.

Your lawn mower engine is not factory-equipped with a spark arrester.
In some areas, it is illegal to operate an engine without a spark
arrester. Check local laws and regulations. An optional USDA
approved spark arrester is available from an authorized Honda
servicing dealer. See page 20 for part numbers.

4. Installation is the reverse of removal. Tighten all hardware
securely.
5. Reconnect the spark plug cap.
SPARK
PLUG
CAP

SPARK ARRESTER

SETSCREW

0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)

Gap: 0.028 ~ 0.031 in
(0.7 ~ 0.8 mm).
Correct the gap, if
necessary, by carefully
bending the side
electrode.

SEALING
WASHER

5. Install the spark plug
carefully, by hand, to
avoid cross-threading.
6. After the spark plug
seats, tighten with a
13/16 in (21 mm) spark plug wrench to compress the washer.

FLANGE BOLT (3)

HEAT SHIELD

If reinstalling the old spark plug, tighten 1/8 to 1/4 turn after the
spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
Spark plug torque: 14 ft-lb (20 N·m)
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
7. Install the spark plug cap on the spark plug.

Blade Control Check

TRANSPORTING

1. Start the engine outdoors.
2. Release the blade control lever; the engine should stop quickly.
If it does not, take your mower to an authorized Honda servicing
dealer for repair.

BLADE CONTROL
LEVER

If the engine has been running, allow it to cool before loading the
mower on the transport vehicle. A hot engine and exhaust system can
burn you and can ignite some materials.
Turn the fuel valve to the OFF position. This will prevent carburetor
flooding and reduce the possibility of fuel leakage.
If installed, remove the grass bag.
If a suitable loading ramp is not available, two people should lift the
mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport
vehicle. Tie the mower down with rope or straps, and block the
wheels. Keep the tie-down rope or straps away from the controls,
adjustment levers, cables, and the carburetor.
Fold the handlebar so the mower will take up less space (page 15).

Smart Drive Cable Check/Adjustment
Cable Check

STORAGE

With the engine off, use the
multi-position adjuster to set the
Smart Drive control in its lowest
position (page 8).

Proper storage preparation is essential for keeping your lawn mower
trouble free and looking good. To help keep rust and corrosion from
impairing your lawn mower’s function and appearance, and to make
the engine easier to start after storage, follow the instructions
described in this section to:

Gradually push the Smart Drive
control down while pulling the lawn
mower backwards. The rear wheels
should lock up before the Smart
Drive paddles are straight
up-and-down. If they don’t, perform the cable adjustment below.

•
•
•
•

Fuel

Cable Adjustment
With the engine off, loosen the jam
nut one revolution.
Without pushing the Smart Drive
control, pull the lawn mower
backwards to check wheel
resistance.
If no wheel resistance exists, mark
the adjuster and TIGHTEN the
adjuster one turn at a time until the
wheels lock-up when pulling
rearward.
Turn the adjuster in the LOOSEN
direction 4 complete revolutions.
Tighten the jam nut to lock the
adjuster in place.

Drain or treat the fuel
Change the oil and coat the engine cylinder
Clean the mower, engine, and grass bag
Choose a storage location

ADJUSTER
MARK

JAM NUT

See “FUEL SYSTEM MAINTENANCE” on page 19 for a list of
recommended procedures to avoid fuel related problems.
The DISTRIBUTOR’S LIMITED WARRANTY (page 21) does not
cover fuel system damage or engine performance problems resulting
from neglected storage preparation.

TIGHTEN
LOOSEN

Oil
Change the engine oil (see page 12).
Add oil in the engine cylinder to prevent rust.
1. Remove the spark plug (page 13).
2. Pour a teaspoon (5 cc) of
clean engine oil into the
cylinder to keep it from
rusting.

OIL

3. Pull the starter rope several
times to distribute the oil in
the cylinder.
4. Reinstall the spark plug.
5. Pull the starter rope slowly
until resistance is felt, and
then return the starter grip
gently. This will close the
valves so moisture cannot
enter the engine cylinder.

SPARK
PLUG
HOLE

Cleaning

Handlebar

Mower Deck

Remove the grass bag if installed. You can place it on top of the
engine with the bag opening to the front.

Before washing the underside of the mower deck, stop the engine and
turn the fuel valve to the OFF position. Rest the mower on its right
side, so the fuel cap side is up. This will help to prevent fuel leakage
and hard starting due to carburetor flooding. Wear heavy gloves to
protect your hands from the blades.
Be careful to avoid getting water into controls and cables.

Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner and exhaust opening.

NOTICE
Using a garden hose or pressure washing equipment can force water
into the air filter. Water in the air cleaner will soak the paper element
and can enter the carburetor or engine cylinder, causing damage.
Water contacting a hot engine can cause damage. If the engine has
been running, allow it to cool before washing.

Grass Bag
Remove the bag from the mower, and wash it with a garden hose or
pressure washer. Allow the bag to dry completely before storage.

Drying
After washing the lawn mower, wipe dry all accessible surfaces.
Place the mower with its wheels on a level surface. Start the engine
outdoors and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.

1. Turn the handlebar adjust knobs 90 degrees to release the
locating pins .
2. Pull and hold the blade control lever .
3. Fold the handlebar forward ; do not pinch or kink the cable.

Removing From Storage
When unfolding the handlebar, be sure to lock the handlebar adjust
knobs to secure the handlebar in the mowing position.
Check your mower as described in BEFORE OPERATION (page 4).
If the cylinder was coated with oil during storage preparation, the
engine may smoke briefly at startup.

Stop the engine and allow it to cool.
After the lawn mower is clean and dry, touch up any damaged paint,
and coat other areas that may rust with a light film of oil.

Storage Location
If your mower will be stored with gasoline in the fuel tank and
carburetor, it is important to reduce the hazard of gasoline vapor
ignition. Select a well-ventilated dry storage area away from any
appliance that operates with a flame, such as a furnace, water heater,
or clothes dryer. Also avoid any area with a spark-producing electric
motor, or where power tools are operated.
Make sure the fuel valve is in the OFF position to reduce the
possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can cause
fuel or oil leakage.
With the engine and exhaust system cool, cover the mower to keep
out dust. A hot engine and exhaust system can ignite or melt some
materials. Do not use sheet plastic as a dust cover. A nonporous
cover will trap moisture around the mower, promoting rust and
corrosion.

TROUBLESHOOTING

Vibration
Possible Cause

Engine Will Not Start
Possible Cause
Blade control not engaged

Correction
Hold blade control lever against the
handlebar (page 3)

Fuel valve OFF

Turn the fuel valve ON (page 9).

Out of fuel

Refuel (page 7).

Bad fuel; mower stored
without treating gasoline, or
refueled with bad gasoline

Refuel with fresh gasoline (page 7).

Spark plug faulty, fouled, or
improperly gapped

Gap or replace the spark plug
(page 13).

Spark plug wet with fuel
(flooded engine)

Dry and reinstall the spark plug.

Fuel filter clogged,
carburetor malfunction,
ignition malfunction, valves
stuck, etc.

Take the mower to an authorized
Honda servicing dealer for repair.

Loss of Power
Possible Cause
Grass is too tall

Correction
Raise the cutting height (page 6), cut
a narrower swath, use a slower
ground speed, or cut more frequently.
Instead of mulching, try rear
discharging or bagging.

Mower deck is clogged

Clean out the mower deck (page 15).

Air filter is clogged

Clean or replace the air filter
(page 12).

Bad fuel; mower stored
without treating gasoline, or
refueled with bad gasoline

Refuel with fresh gasoline (page 7).

Fuel filter clogged,
carburetor malfunction,
ignition malfunction, valves
stuck, etc.

Take the mower to an authorized
Honda servicing dealer for repair.

Correction

Grass and debris lodged
under the mower deck

Clean out the mower deck (page 15).

Blades loose

Tighten loose blade bolts (page 11).

Blades bent, damaged, or
unbalanced by improper
sharpening

Take the mower to an authorized
Honda servicing dealer for repair.

Mechanical damage, such
as a bent crankshaft

Mowing and Bagging Problems
Possible Cause

Correction

Mower is moving too fast
for lawn conditions

Apply less pressure to the Smart
Drive paddles.

Cutting height adjustment
levers set at different
positions

Set all levers at the same cutting
height position (page 6).

Grass bag clogged

Wash the grass bag (page 15).

Mower deck is clogged

Clean out the mower deck (page 15).

Blades dull, worn, or
damaged

Sharpen or replace the blades if
necessary (page 11).

Wrong blades installed

Install correct blades (page 20).

Emission Control System

TECHNICAL INFORMATION

Source of Emissions
The combustion process produces carbon monoxide, oxides of
nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of
nitrogen is very important because, under certain conditions, they
react to form photochemical smog when subjected to sunlight. Carbon
monoxide does not react in the same way, but it is toxic.

Serial Number Locations

Honda utilizes appropriate air/fuel ratios and other emissions control
systems to reduce the emissions of carbon monoxide, oxides of
nitrogen, and hydrocarbons. Additionally, Honda fuel systems utilize
components and control technologies to reduce evaporative
emissions.
ENGINE
SERIAL NUMBER

MODEL NAME AND
FRAME SERIAL NUMBER

CONFORMS TO ANSI B 71.1-SAFETY STANDARD

HRX2174VKA
MAGA –– XXXXXXX

AMERICAN HONDA MOTOR CO., INC.
ALPHARETTA, GA 30005-8847

There are two serial numbers, one for the engine and one for the
mower frame. Record the engine and frame serial numbers in the
space below. You will need these serial numbers when ordering parts
and when making technical or warranty inquiries.
Engine serial number: _________________________________
Frame serial number: __________________________________
Date of purchase: _____________________________________

High Altitude Operation
At high Altitudes, the standard carburetor air-fuel mixture will be too
rich. Performance will decrease, and fuel consumption will increase. A
very rich mixture will also foul the spark plug and cause hard starting.
Operation at an Altitude that differs from that at which this engine was
certified, for extended periods of time, may increase emissions.
High Altitude performance can be improved by specific modifications
to the carburetor. If you always operate your lawn mower at Altitudes
above 5,000 feet (1,500 meters), have your servicing dealer perform
this carburetor modification. This engine, when operated at high
Altitude with the carburetor modifications for high Altitude use, will
meet each emission standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease
about 3.5% for each 1,000-foot (300-meter) increase in Altitude. The
effect of Altitude on horsepower will be greater than this if no
carburetor modification is made.
NOTICE
When the carburetor has been modified for high Altitude operation,
the air-fuel mixture will be too lean for low Altitude use. Operation at
Altitudes below 5,000 feet (1,500 meters) with a modified carburetor
may cause the engine to overheat and result in serious engine
damage. For use at low Altitudes, have your servicing dealer return
the carburetor to original factory specifications.

U.S. and California Clean Air Acts, and Canadian
Environment Protection Act
U.S. EPA, California, and Canadian regulations require all
manufacturers to furnish written instructions describing the operation
and maintenance of emissions control systems.
The following instructions and procedures must be followed in order to
keep the emissions from your Honda engine within the emissions
standards.

Tampering and Altering
NOTICE
Tampering is a violation of Federal and California law.
Tampering with or altering the emissions control system may increase
emissions beyond the legal limit. Among those acts that constitute
tampering are:
• Removal or alteration of any part of the intake, fuel, or exhaust
systems.
• Altering or defeating the speed-adjusting mechanism to cause the
engine to operate outside its design parameters.

Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your servicing dealer.
•
•
•
•

Hard starting or stalling after starting
Rough idle
Misfiring, backfiring under load, or afterburning
Black exhaust smoke or high fuel consumption

Replacement Parts
The emissions control systems on your new Honda engine were
designed, built, and certified to conform with EPA, California, and
Canadian emissions regulations. We recommend the use of Honda
Genuine parts whenever you have maintenance done. These
original-design replacement parts are manufactured to the same
standards as the original parts, so you can be confident of their
performance. The use of replacement parts that are not of the original
design and quality may impair the effectiveness of your emissions
control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emissions performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emissions
regulations.

Maintenance
Follow the MAINTENANCE SCHEDULE on page 10. Remember this
schedule is based on the assumption that your machine will be used
for its designed purpose. Sustained high-load or high-temperature
operation, or use in unusually wet or dusty conditions, will require
more frequent service.
17

Air Index

Maintenance

An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.

Fuel

Descriptive Term

page 7

Capacity: 0.25 US gal (0.93 L)

The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION SYSTEM WARRANTY (page 22) for
additional information.

Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
See “FUEL SYSTEM MAINTENANCE”
on page 19 to prevent fuel-related
problems

Blade Bolt
Torque

36 ~ 43 ft-lb (49 ~ 59 N•m)

page 11

Engine Oil

SAE 10W-30, API SJ or later
Capacity: 17.0 oz (0.50 L)

page 12

Applicable to Emissions
Durability Period

Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*

Moderate

50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)

Spark Plug

Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)

page 13

Intermediate

125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)

Smart Drive
Cable

Adjust for proper operation.

page 14

Extended

300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)

Maximum
Governed
Speed

2,950 ~ 3,100 rpm **

Shop
manual

Intake: 0.15 ± 0.04 mm

Shop
manual

Valve
clearance
(cold)

Specifications
Mower Features
HRX217K4VKA

*
Honda rotary mower, 21-inch mower deck,
Clip Director, Smart Drive variable speed
transmission, flywheel brake, fixed throttle,
Auto Choke System™

Dimensions and Weights
Length

63.8 in (1621 mm)

Width

23 in (585 mm)

Overall height *

38.4 in (976 mm)

Dry weight

90.8 lb (41.2 kg)

Cutting width

21.0 in (530 mm)

Cutting heights

3/4 ~ 4 in (20 ~ 102 mm)

* 1-1/4 inch cutting height and handle in highest position

Engine Design and Performance
Model

GCV190

Type

4-stroke, overhead-cam,
single-cylinder, air-cooled

Displacement
Bore and stroke
Compression ratio
Ignition system

11.4 cu in (187 cc)
2.71 x 1.97 in (69 x 50 mm)
8.5:1
Transistorized magneto

Transmission Design and Performance
Transmission type
Ground speeds

Variable speed
0 ~ 3.6 mph (0 ~ 1.6 m/s)

Exhaust: 0.20 ± 0.04 mm

Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level (page 6).

** Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.

FUEL SYSTEM MAINTENANCE
When properly maintained, your Honda lawn mower should provide years of trouble-free operation. This includes the fuel system.
However, gasoline can quickly deteriorate, causing starting or running problems and, in some cases, damage to the fuel system. Most
fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performance problems
resulting from deteriorated fuel are not covered by the Distributor’s Limited Warranty (see page 21).

During the Normal Mowing Season
Action

Reason

Do not use gasoline containing more than 10% ethanol.

A high level of ethanol in gasoline attracts water, and can corrode
or damage the fuel system and cause performance problems.

Store gasoline in a clean, plastic, sealed container approved for
fuel storage.

A clean plastic container will prevent rust and metallic
contaminants from entering the fuel system.

Store your fuel supply container away from direct sunlight; if the
container has a vent, keep it closed.

Gasoline will deteriorate faster when exposed to air and sunlight.

Purchase only enough gasoline to last for 30 to 60 days.

Gasoline deteriorates with age, so try to avoid storing it for long
periods, especially in summer heat.

If you purchase enough gasoline to last for more than 60 days,
add a fuel stabilizer to your storage tank when you fill it.

Fuel stabilizer will extend the shelf life of gasoline, but it will not
reconstitute stale fuel.

When you finish mowing, turn the fuel valve OFF and fill the
mower’s fuel tank.

If the fuel tank is only partially filled, air in the tank will promote
fuel deterioration.

3 to 4 Weeks Before Next Use
Action

Reason

Turn the fuel valve OFF and fill the mower’s fuel tank.

If the fuel tank is only partially filled, air in the tank will promote
fuel deterioration.

With the fuel valve off, start the engine and let it run until it runs
out of gas. Running time should be approximately 3 minutes.

The small amount of gasoline in your lawn mower’s carburetor
will deteriorate faster than the fuel in the fuel tank due to its small
volume and heat from the engine.

1 to 3 Months Before Next Use
Action

Reason

If you did not add fuel stabilizer to your fuel storage tank when
you filled it up, fill your mower’s fuel tank with fresh gasoline.

If the fuel tank is only partially filled, air in the tank will promote
fuel deterioration.

Add fuel stabilizer to the mower tank according to the stabilizer
manufacturer’s instructions.

Fuel stabilizer will extend the life of gasoline, but it will not
reconstitute stale gasoline.

Run the engine outdoors for 10 minutes.

To make sure treated gasoline has replaced untreated gasoline
throughout the fuel system.

Stop the engine and turn the fuel valve OFF. Restart the engine
and let it run until it runs out of gasoline. Running time should be
approximately 3 minutes.

The small amount of gasoline in your lawn mower’s carburetor
will deteriorate faster than the fuel in the fuel tank due to its small
volume and heat from the engine.

More Than 3 Months Before Next Use
Action
Start the engine and let it run long enough to empty all the
gasoline from the entire fuel system, including the fuel tank. Do
not allow gasoline to remain in your lawn mower for more than 3
months of inactivity.

Reason
All fuel stabilizers have a shelf life. It is good practice to empty
the fuel system for long term inactivity.

If you have fuel left in your storage container at the end of the season, the EPA (Environmental Protection Agency) recommends
adding the gasoline to your car’s gas tank (http://epa.gov/reg5oair/mobile/winter.html), provided your car’s gas tank is fairly full.

CUSTOMER INFORMATION
Parts, Accessories, and Service Items
Contact an authorized Honda servicing dealer to purchase any of
these (or other) Honda Genuine items for your lawn mower.

Part Number

Spark plug

98079-55846

Honda Power Equipment dealership personnel are trained
professionals. They should be able to answer any question you may
have. If you encounter a problem that your dealer does not solve to
your satisfaction, please discuss it with the dealership's management.
The Service Manager or General Manager can help. Almost all
problems are solved in this way.
If you are dissatisfied with the decision made by the dealership's
management, contact the Honda Power Equipment Customer
Relations Office. You can write:

Replacement Parts
Item

How to Contact Honda

Notes

American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847

NGK (brand) BPR5ES

Air filter

17211-ZL8-023

Paper

Lower blade

72511-VH7-000

Upper blade

72531-VH7-000

Always use an upper and
lower blade as a set.

Blade bolt

90105-VA3-J01

2 required, 10 x 25 mm

When you write or call, please give us this information:

Spring washer

90502-VG3-000

2 required

Grass bag

81320-VH7-D00

Fabric bag only, no frame

Wheel/tire

42710-VH7-010ZA

Rear

44710-VH7-010ZA

Front

•
•
•
•
•
•

Or telephone: (770) 497-6400

M-F, 8:30 a.m. - 7:00 p.m. ET

Model and serial numbers (page 17)
Name of the dealer who sold the lawn mower to you
Name and address of the dealer who services your lawn mower
Date of purchase
Your name, address, and telephone number
A detailed description of the problem

Accessories
Item

Part Number

Notes

Spark arrester
kit

06180-Z0J-000

Includes spark arrester, ID
plate, and screw

Mower deck
guard kit

06761-VH7-000AH

Two stainless steel side
guards

Lawn mower
cover

08P59-VE2-000AH

Custom fitted, waterproof,
and breathable

SAE 10W-30
engine oil
NO-SPILL®
gas cans

Owner’s Manual
Keep this owner’s manual handy so you can refer to it at any time.
Consider this owner’s manual a permanent part of the lawn mower;
please give it to the new owner if you resell the lawn mower.

1 quart

06176-1415-C6

1-1/4 gallon

Shop Manual

06176-1405-C6

2-1/2 gallon

This manual covers complete maintenance and overhaul procedures.
It is intended to be used by a skilled technician. Available through
your Honda dealer or visit
http://powerequipment.honda.com and click on Product Support;
then click on Shop Manuals.

Part Number
08207-10W30

Notes

Fuel stabilizer

08732-0800

8 ounces
For short and
long term storage

Matte black
touch-up paint
(aerosol can)

08707-NH105

For handlebar only

® NO-SPILL is a registered trademark of NoSpill LLC.

Dealer Locator Information
To find an Authorized Honda Servicing Dealer anywhere in the United
States:
Visit http://powerequipment.honda.com and click on Find a Dealer.

These publications will give you information for maintaining and
repairing your lawn mower.

The information and specifications included in this publication were in
effect at the time of approval for printing. American Honda Motor Co.,
Inc. reserves the right, however, to discontinue or change
specifications or design at any time without notice and without
incurring any obligation whatever. No part of this publication may be
reproduced without written permission.

Service Items
Item

Honda Publications

Parts Catalog
This manual provides complete, illustrated parts lists, and is available
through your Honda dealer.

Frequently Asked Questions
The Honda Power Equipment web site provides
additional information for users of Honda power
equipment. Visit http://powerequipment.honda.com
and click on FAQs or scan the QR code shown.

DISTRIBUTOR’S LIMITED WARRANTY
Honda Power Equipment
This warranty is limited to the following Honda Power Equipment products when
distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 Marconi
Drive, Alpharetta, Georgia 30005-8847, purchased at retail or placed in rental service on
or after January 1, 2010.

PRODUCTS COVERED
BY THIS WARRANTY

HRX Mower and

LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL(1)

COMMERCIAL/
RENTAL/
INSTITUTIONAL

60 months

3 months

deck(2)

Some states do not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages, so
the above exclusions and limitations may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to
state.

Honda Parts, Accessories, and Apparel
This warranty is limited to Honda Power Equipment parts, accessories, and apparel when
distributed by American Honda Motor Co., Inc., 4900 Marconi Drive, Alpharetta, Georgia
30005-8847.

PRODUCTS COVERED
BY THIS WARRANTY

(1)

Private residential: Used in maintaining owner’s primary and/or secondary residence.
Any other use, including but not limited to informal “for hire” use, is considered
commercial/rental/institutional use.
(2)
Limited lifetime warranty on mower deck is valid for the original purchaser for private
residential use only.

To Qualify for This Warranty:
The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin
Islands from American Honda or a dealer authorized by American Honda to sell
those products. This warranty applies to first retail purchaser and each subsequent
owner during the applicable warranty time period, unless noted otherwise.

What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any part that is proven to be
defective in material or workmanship under normal use during the applicable
warranty time period. Warranty repairs and replacements will be made without
charge for parts or labor. Anything replaced under warranty becomes the property of
American Honda Motor Company, Inc. All parts replaced under warranty will be
considered as part of the original product, and any warranty on those parts will
expire coincident with the original product warranty.

To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment product, accessory,
replacement part, apparel, or the power equipment on which the
accessory or replacement part is installed, and proof of purchase to any Honda
Power Equipment dealer in the United States, Puerto Rico, or the
U.S. Virgin Islands who is authorized to sell and/or service that product, during the
dealer’s normal business hours. To locate a dealer near you, visit
our web site at http://PowerEquipment.Honda.com and click on Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty
service you receive, contact the owner of the dealership involved;
normally this will resolve the problem. However, if you should require further
assistance, write or call the Power Equipment Customer Relations Department of
American Honda Motor Co., Inc. See “How to Contact Honda” on page 20.

Exclusions:
1. Any damage or deterioration resulting from the following:
- Neglect of the periodic maintenance as specified in this manual
- Improper repair or maintenance
- Operating methods other than those indicated in this manual
- The use of non-genuine Honda parts, accessories, lubricants, and fluids other
than those approved by Honda
- Exposure of the product to soot and smoke, chemical agents, bird droppings,
sea water, sea breeze, salt or other environmental phenomena
- Collision, fuel contamination or deterioration, neglect, unauthorized alteration,
misuse, incorporation or use of unsuitable attachments or parts
- Normal wear and tear (including, but not limited to, normal fading of painted or
plated surfaces, sheet peeling, and other natural deterioration)
2. Consumable parts: Honda does not warrant parts deterioration due to normal
wear and tear. The following parts are not covered by warranty (unless they are
needed as a part of another warranted repair): spark plug, fuel filter, air cleaner
element, clutch disc, tire, wheel bearing, recoil starter rope, cable, belt, cutter
blade, oil, and grease.
3. Cleaning, adjustment, and normal periodic maintenance work (carburetor
cleaning, engine oil draining, blade sharpening, belt and cable adjustments).
4. Any product that has ever been declared a total loss or sold for salvage by a
financial institution or insurer.
5. Auger and paddle assemblies of snow throwers, tiller tines of roto-tillers, mower
blades and mower deck housings, are specifically not warranted against impact
damage, including but not limited to, abrasive damage.

Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda disclaims any responsibility for loss of time or use of the product,
transportation, commercial loss, or any other incidental or consequential damage.
Any implied warranties are limited to the duration of this written limited warranty.

Parts

LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
COMMERCIAL/
RESIDENTIAL
RENTAL/
INSTITUTIONAL
6 months
3 months

Accessories

12 months

3 months

Apparel

6 months

3 months

To Qualify for This Warranty:
1. The parts, accessories, or apparel must be purchased from American Honda or
a dealer authorized by American Honda to sell those products in the United
States, Puerto Rico, and the U.S. Virgin Islands. Parts and Accessories must be
purchased for installation on original Honda equipment or engines to be eligible
for warranty coverage. Installing parts and accessories on non-Honda products
or engines voids this warranty.
2. You must be the first retail purchaser. This warranty is not transferable to
subsequent owners.

What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any Honda Power Equipment
parts, accessories, replacement parts, or apparel that are proven to be defective in
material or workmanship under normal use during the applicable warranty time
period. Anything replaced under warranty becomes the property of American Honda
Motor Company, Inc. The warranty on all parts, accessories, and apparel replaced
under warranty will expire coincident with the original warranty on the replaced
parts, accessories, or apparel.
Parts and accessories installed by a dealer who is authorized by American Honda to
sell them will be repaired or replaced under warranty without charge for parts or
labor. If installed by anyone else, parts and accessories will be repaired or replaced
under warranty without charge for parts, but any labor charges will be the
responsibility of the purchaser.
Apparel will be repaired or replaced under warranty without any charge.

To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment part, accessory,
apparel or the Honda Power Equipment on which the part or accessory is installed,
and proof of purchase to any Honda Power Equipment dealer in the United States,
Puerto Rico, or the U.S. Virgin Islands who is authorized to sell that product, during
the dealer's normal business hours. To locate a dealer near you, visit our web site at
http://PowerEquipment.Honda.com and click on Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty
service you receive, contact the owner of the dealership involved; normally this will
resolve the problem. However, if you should require further assistance, write or call
the Power Equipment Customer Relations Department of American Honda Motor
Co., Inc. See “How to Contact Honda” on page 20.

Exclusions:
This warranty does not extend to parts, accessories, or apparel affected or
damaged by collision, normal wear, use in an application for which the product was
not designed or any other misuse, neglect, incorporation or use of unsuitable
attachments or parts, unauthorized alteration, improper installation, or any causes
other than defects in material or workmanship of the product. Installing parts and
accessories on non-Honda products or engines voids this warranty.

Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda disclaims any responsibility for loss of time or use of the product,
or the power equipment on which the product is installed, transportation,
commercial loss, or any other incidental or consequential damage. Any implied
warranties are limited to the duration of this written warranty. Some states do not
allow limitations on how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential damages, so the above
exclusions and limitations may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
PWL50623-S

EMISSION SYSTEM WARRANTY
Your new Honda Power Equipment engine complies with the U.S. EPA,
Environment Canada, and State of California emission regulations (models
certified for sale in California only). American Honda Motor Co., Inc. provides
the emission warranty coverage for engines in the United States and its
territories. Honda Canada Inc. provides the emission warranty for engines in
the 13 provinces and territories of Canada. In the remainder of this Emission
Control System Warranty, American Honda Motor Company Inc. and Honda
Canada Inc. will be referred to as Honda.

YOUR WARRANTY RIGHTS AND OBLIGATIONS:
CALIFORNIA
The California Air Resources Board and Honda are pleased to explain the
emission control system warranty on your 2014 and later Honda Power
Equipment engine. In California, new spark-ignited small off-road equipment
engines must be designed, built, and equipped to meet the state's stringent
anti-smog standards. Specific Honda products that do not meet the California
emissions regulations can be identified by a “Not for sale in California” decal.
OTHER STATES, U.S. TERRITORIES, AND CANADA
In other areas of the United States and in Canada, your engine must be
designed, built, and equipped to meet the U.S. EPA and Environment Canada
emission standards for spark-ignited engines at or below 19 kilowatts.
ALL OF THE UNITED STATES AND CANADA
Honda must warrant the emission control system on your power equipment
engine for the period of time listed below, provided there has been no abuse,
neglect, or improper maintenance of your power equipment engine. Where a
warrantable condition exists, Honda will repair your power equipment engine at
no cost to you including diagnosis, parts, and labor.
Your emission control system may include such parts as the carburetor or fuel
injection system, the ignition system, and catalytic converter. Also included
may be hoses, connectors, and other emission-related assemblies (see page
2 for additional covered parts).

OWNER'S WARRANTY RESPONSIBILITY:
As the power equipment engine owner, you are responsible for completing all
required maintenance listed in your owner's manual. Honda recommends that
you retain all receipts covering maintenance on your power equipment engine,
but Honda cannot deny warranty coverage solely for the lack of receipts or for
your failure to ensure that all scheduled maintenance has been completed.
As the power equipment engine owner, you should however be aware Honda
may deny you warranty coverage if your power equipment engine or a part has
failed due to abuse, neglect, improper maintenance, or unapproved
modifications.
You are responsible for presenting your power equipment engine to a Honda
Power Equipment dealer as soon as a problem exists. The emission related
warranty repairs should be completed in a reasonable amount of time, not to
exceed 30 days.
If you have any questions regarding your emission warranty rights and
responsibilities, you should contact the Honda office in your region:
American Honda Motor Co., Inc.
Power Equipment Customer
Relations
4900 Marconi Drive
Alpharetta, Georgia 30005-8847
Telephone: (888) 888-3139
Email: powerequipmentemissions
@ahm.honda.com

Honda Canada Inc.
Power Equipment Customer
Relations
180 Honda Blvd.
Markham, ON, L6C 0H9
Telephone: (888) 946-6329

WARRANTY COVERAGE:
Honda power equipment engines sold in the United States and Canada are
covered by this warranty for a period of two years from the date of delivery to
the original retail purchaser or the length of the Honda Distributor’s Limited
Warranty, whichever is longer. This warranty is transferable to each subsequent
purchaser for the duration of the warranty period.
If any emission-related part on your engine is defective, the part will be repaired
or replaced by Honda without charge for diagnosis, parts, or labor. All defective
parts replaced under this warranty become the property of Honda. Only Honda
approved replacement parts may be used in the performance of any warranty
repairs and must be provided without charge to the owner. A list of warranted
parts is on the reverse side of this warranty statement. Normal maintenance
items, such as spark plugs and filters, that are on the warranted parts list are
warranted up to their required replacement interval only.

Honda will also replace other engine components damaged by a failure of any
warranted part during the warranty period.
The use of replacement parts not equivalent to the original parts may impair
the effectiveness of your engine emission control system. If such a
replacement part is used in the repair or maintenance of your engine, and an
authorized Honda dealer determines it is defective or causes a failure of a
warranted part, your claim for repair of your engine may be denied. If the part
in question is not related to the reason your engine requires repair, your claim
will not be denied.

TO OBTAIN WARRANTY SERVICE:
You must, at your own expense, take your Honda Power Equipment engine or
the product on which it is installed, along with your sales registration card or
other proof of original purchase date, to any Honda Power Equipment dealer
who is authorized by Honda to sell and service that Honda product during their
normal business hours. Claims for repair or adjustment found to be caused
solely by defects in material or workmanship will not be denied because the
engine was not properly maintained and used.
If you are unable to obtain emission warranty service or are dissatisfied with
the warranty service you received, contact the owner of the dealership
involved. Normally this should resolve your problem. However, if you require
further assistance, contact the Honda office in your region. Refer to adjacent
column for contact information.

EXCLUSIONS:
Failures other than those resulting from defects in material or workmanship are
not covered by this warranty. This warranty does not extend to emission control
systems or parts that are affected or damaged by owner abuse, neglect,
improper maintenance, misuse, misfueling, improper storage, collision, the
incorporation of, or use of, unsuitable attachments, or the unauthorized
alteration of any part.
This warranty does not cover replacement of expendable maintenance items
made in connection with required maintenance service after the item’s first
scheduled replacement as listed in the maintenance section of the product
owner’s manual, such as: spark plugs and filters.

DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION
OF IMPLIED WARRANTIES:
American Honda Motor Co., Inc. and Honda Canada Inc. disclaim any
responsibility for incidental or consequential damages such as loss of time or
the use of the power equipment, or any commercial loss due to the failure of
the equipment; and any implied warranties are limited to the duration of this
written warranty. This warranty is applicable only where the California, U.S.
EPA, or Environment Canada emission control system warranty regulation is in
effect.

EMISSION CONTROL SYSTEM WARRANTY PARTS:
SYSTEMS COVERED
BY THIS WARRANTY:

PARTS
DESCRIPTION:

Fuel Metering

Carburetor assembly, (includes starting enrichment
system), Engine temperature sensor, Engine control
module, Fuel regulator, Intake manifold

Evaporative

Fuel tank, Fuel cap, Fuel hoses, Vapor hoses,
Carbon canister, Canister mounting brackets,
Fuel strainer, Fuel cock, Fuel pump, Fuel hose joint,
Canister purge hose joint

Exhaust
Air Induction
Ignition

Catalyst, Exhaust manifold
Air filter housing, Air filter element*
Flywheel magneto, Ignition pulse generator,
Crankshaft position sensor, Power coil, Ignition coil
assembly, Ignition control module, Spark plug cap,
Spark plug*

Crankcase Emission
Control

Crankcase breather tube, Oil filler cap

Miscellaneous Parts

Tubing, fittings, seals, gaskets, and clamps
associated with these listed systems.

Note: This list applies to parts supplied by Honda and does not cover parts
supplied by the equipment manufacturer. Please see the original
equipment manufacturer’s emissions warranty for non-Honda parts.
* Covered up to the first required replacement only. See the MAINTENANCE
SCHEDULE on page 10.
PWL50975-O

PRODUCT REGISTRATION
Thank you for choosing Honda. To ensure you receive important service information in the event
of a product update or recall, please register your lawn mower within 30 days of purchase.
From time to time, American Honda conducts sales promotions that require you to register your
lawn mower within 30 days of purchase. If you purchased your Honda lawn mower during one
of these promotions, you must register your mower within 30 days.
Your information will remain confidential. It will not be released to any other company or organization.
Failure to register your lawn mower does not diminish your warranty rights.
Please complete and mail the postage paid card or
register online at http://powerequipment.honda.com

MODEL: XXXX XXXX
SERIAL NO: XXXX-XXXXXXX

Print the serial number here.

* Dealer Store number

Serial number

* Dealer ZIP code

*If available
Owner's Last Name

First Name

Company Name (commercial/rental users)

Telephone

(

)

Address
City
y

State

ZIP Code

E-mail address

Purchased Via (check one)

Date of Purchase

In Store
MONTH

Application (check one)

DAY

Online

YEAR

Commercial

(professional use)

Non-commercial

(private, homeowner use)

Rental

(for-hire use)

1. Go to www.PowerEquipment.Honda.com to register your unit.

2. Click on Product Registration.
3. Complete the required information and click Submit.
It’s that simple!

NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES

Product Registration

BUSINESS REPLY MAIL
FIRST-CLASS MAIL

PERMIT NO. 117

ALPHARETTA GA

POSTAGE WILL BE PAID BY ADDRESSEE

Power Equipment Division
American Honda Motor Co. Inc.
4900 Marconi Dr
Alpharetta GA 30005-9956

EM5

HPE.2013.11
PRINTED IN U.S.A.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2012:07:20 07:10:33Z
Creator                         : FrameMaker 11.0.2
Modify Date                     : 2013:12:03 12:00:59-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Creator Tool                    : FrameMaker 11.0.2
Metadata Date                   : 2013:12:03 12:00:59-05:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:4dbd2a33-c1a7-4f68-bfd1-46e6fa1a4bf0
Instance ID                     : uuid:6fed269c-e751-403d-9efb-683d9a993359
Page Mode                       : UseOutlines
Page Count                      : 24

EXIF Metadata provided by EXIF.tools

Honda Hrx217Vka Ma Ga 2200001 Through 9999999 Owners Manual

HRX217VKA 00X31VH7N030

Navigation menu

Versions of this User Manual:

Views

Navigation