Honeywell 8DLTSSCBASE Security Base Control Unit User Manual Rev B

Download:
Mirror Download [FCC.gov]
Document ID	2240064
Application ID	oKhaluYyEpN+XclZ3FN79Q==
Document Description	Users Manual Rev B
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.17kB (827080 bits)
Date Submitted	2014-04-11 00:00:00
Date Available	2014-10-10 00:00:00
Creation Date	2014-04-08 16:17:29
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2014-04-11 14:24:06
Document Title	Users Manual Rev B
Document Creator	Acrobat PDFMaker 11 for Word

PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
CFS8DLTSSCBASE / 573F-TSSCBASE
EXHIBIT 7A B
TSSBU111011U Base Control Unit and
TSSKP112011U Wireless Bidirectional Alpha Keypad
User Guide
BASE FEATURES
Display
The TSSBU111011U (Base) is a wir el ess Cont r ol Unit t hat all ows you t o per for m syst em ar ming and
disar ming funct i ons, as well as t o monit or t he st at us of your secur i t y syst em.
TSSBU111011U w/Protective Door Removed
LEDs
LED
POWER
Off
Red
Amber
No AC
BATTERY
(see note 1)
Green
Flashing
Amber
Flashing
Red
Alternating
Flashing
AC
Low
Battery/
Missing
Battery
Charging
Battery Normal
STATUS
Not Ready
Armed
System
Trouble
Ready
NETWORK
Not
Configured
No
Ethernet
Link
Link but
Not
Connected
to Alarm
Receiver
Ethernet
Link
CELLULAR
Not
Configured
No
Connection
or Bad
Signal
(see note 2)
Flashing
Green
Good
Signal
In
Programming
- Red
Device
Trouble –
Can Arm
Device
Trouble –
Cannot
Arm
Alarm/Alarm
Memory
In
Programming
- Off
In
Programming
- Green
Cell but No
Data
SIM Error
In
Programming
- Off
N OT E 1: Dur ing Sl eep M ode only t he BATTERY L ED is act ive.
N OT E 2: Thi s L ED may r emain in t he Amber st at e for up t o 24 H our s unt il a r epor t i s sent
and acknowledged by t he cent r al st at ion.
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
KEYPAD FEATURES
Display
The TSSK P112011U (K eypad) is a wir el ess K eypad t hat all ows you t o per for m your secur i t y syst em
funct ions, as well as t o di splay t he st at us of your secur it y syst em.
TSSKP112011U w/ Protective Door Removed
LEDs
LED
Off
Red
Low Battery
5%/Missing
Battery
(when no
AC)
(Keypad's
battery)
POWER
TROUBLE
In
Programming,
No Trouble
STATUS
Not Ready
Amber
Charging
Green
AC
System
Trouble
Armed
Flashing
Green
Flashing
Amber
On Battery
– Normal
(no AC)
Flashing
Red
Alternating
Flashing
Low Battery
20% (no
AC)
(Keypad's
battery)
In
Programming
- Red
Alarm/Alarm
Memory
In
Programming
- Green
Device
Trouble
Ready to
Arm
N OT E: Dur ing Bat t er y M ode only t he POWER L ED is act ive.
–2–
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
KEYS
Access t he Base cont r ol keys by lift ing up t he door . The K eypad k eys ar e cont i nuously back lit for ease of
use. Access t he K eypad k eys by opening t he swing-down door . The K eypad k eys ar e cont inuously
backl it for ease of use.
K EY
DESCRI PTI ON
OF F
Disar ms t he bur gl ar y por t ion of t he syst em, sil ences alar ms and audi bl e t r oubl e
indicat or s, and cl ear s visual al ar m t r ouble aft er t he pr obl em has been cor r ect ed.
AWAY
Compl et ely ar ms bot h per imet er and int er i or bur glar y pr ot ect i on by sensing an int r uder 's
movement s t hr ough pr ot ect ed int er ior ar eas as wel l as guar ding pr ot ect ed door s,
windows, et c. L at e ar r ival s can ent er t hr ough an ent r y delay zone (ent r ance door ) wit hout
causing an alar m if t he syst em i s di sar med befor e t he ent r y delay t i me expir es.
ST AY
Ar ms t he per imet er bur gl ar y pr ot ect ion, guar ding pr ot ect ed door s, windows and ot her
per imet er pr ot ect i on point s, and sounds an alar m if one is opened. Also all ows aut omat ic
bypassing of cer t ain ar eas which per mi t s movement wit hin your house wi t hout causing
an alar m. L at e ar r ivals can ent er t hr ough an ent r y delay zone (ent r ance door ) wit hout
causing an alar m if t he syst em i s di sar med befor e t he ent r y delay t i me expir es.
M AX
Ar ms in manner similar t o AWAY mode, but eliminat es t he ent r y delay per i od, t hus
pr oviding maximum pr ot ect ion. An al ar m wil l occur immedi at ely upon opening any
pr ot ect i on point , including ent r y delay zones (ent r ance door s).
T EST
(K eypad only) - Test s t he syst em and alar m sounder if disar med.
BYPASS
(K eypad only) - Removes i ndividual pr ot ect ion zones fr om being monit or ed by t he syst em.
Displays pr evi ously bypassed pr ot ect ion zones.
I N ST AN T
Ar ms in manner similar t o STAY mode, but t ur ns off t he ent r y delay per iod, offer ing
gr eat er secur i t y whil e insi de and not expect ing any l at e ar r ivals. An al ar m wil l occur
immedi at ely upon opening any per imet er pr ot ect i on point , including ent r y del ay zones.
COD E
(K eypad only) - All ows t he ent r y of addit ional user codes t hat can be given t o ot her user s
of t he syst em.
CH I M E
(K eypad only) - Tur ns on and off t he CH I M E mode. When on, any ent r y t hr ough a
pr ot ect ed del ay or per imet er zone whi le t he syst em i s disar med will cause a t one t o sound
at t he K eypad(s).
READ Y
(K eypad only) - When depr essed pr ior t o ar ming t he syst em, t he K eypad wi ll display all
open pr ot ect ion zones wi t hin t he K eypad's home par t it i on. Thi s k ey i s al so used t o di splay
all zone descr ipt or s t hat have been pr ogr ammed for your syst em, by holding t he k ey down
for at least 5 seconds.
[#]
(K eypad only) - Per mi t s ARM I NG of t he syst em wit hout use of a secur it y code ("Quick
Ar m", if pr ogr ammed).
Numer ic
keys 0-9
Used t o ent er your individual secur i t y access code(s).
Speci al
funct ion
keys
Panic alar m act ivat i on (K eypad only). The panic alar ms ar e act ivat ed by pr essing a
Speci al Funct i on K ey (see bel ow). Panic key funct i onalit y and t he t ype of panic alar ms
pr oduced, i s det er mined by t he cont r ol panel’s capabilit y and pr ogr amming. (Check wi th
your i nstal l er for the avai l abi l i ty and assi gnment of these pani c keys.)
SPECIAL FUNCTION KEYS (KEYPAD ONLY)
The A, B, and C k eys locat ed t o t he l eft of t he
numer ic k eys can be pr ogr ammed as Panic Alar m
Act ivat ion keys. (Check wi th your i nstal l er for the
avai l abi l i ty and assi gnment of these pani c keys.)
–3–
Key
F unction
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
GENERAL OPERATION
To mak e sur e t he lat est syst em st at us is di splayed, pr ess t he [* ] k ey befor e and aft er ent er ing each
command.
HOW TO GET SYSTEM STATUS
The di splay cont inuously displays t he pr esent secur it y syst em st at us. When t her e is a change in syst em
st at us (such as going fr om an ARM ED STAY t o DI SARM ED), i t may t ak e up t o 20 seconds for t he di splay t o
aut omat ically updat e t he st at us t o show t he st at us change. H owever , you can pr ess t he [* ] key t o updat e t he
display immedi at ely.
ARMING THE SYSTEM
To ar m t he syst em in t he AWAY, STAY, I N STAN T or M AX mode, ent er your user code and pr ess t he
numer ic k ey above t he sel ect ed mode.
DISARMING THE SYSTEM
To disar m t he syst em ent er your user code + OF F k ey [1].
BYPASSING ZONES
To bypass an individual zone, ent er your user code + BYPASS k ey [6] + faul t ed zone number of t he zone t o
be bypassed. To bypass mult ipl e zones, ent er t he command st r ing (user code + BYPASS k ey [6]) t hen
sequent ial ly ent er t he 3-di git zone number s of t he zones t o be bypassed, up t o five zones in each command.
M ult iple Zone Bypass Example: user code + BYPASS [6] + 003 004 005 007 009.
I f you want t o bypass al l fault ed zones (For ced Bypass), ent er your user code + BYPASS k ey [6] + [#] + [0].
The For ced Bypass feat ur e must be enabled by your inst all er : [ ] yes
[ ] no
USER CODES
To Add a User
I M POR T AN T : Tempor ar y user s should not be shown how t o use any syst em funct ion t hey
do not need t o know (e.g. bypassing pr ot ect i on zones).
Ent er M ast er code + COD E k ey [8] + 2-t wo digi t user no. + 4-digi t new user ’s code.
User number s 02 t hr ough 96 ar e availabl e wit h var i ous aut hor it y l evels. Not e t hat U ser no.
01 i s used for t he M ast er code
AU T H ORI T Y L E VEL :
Ent er M ast er code + COD E k ey [8] + 2-digi t user no. + [#] + [1] + singl e-digit aut hor i t y level.
For aut hor it y levels, see definit ions bel ow.
Level
Title
Explanation
N/A
Master
Standard User
Arm Only
Guest
Duress Code
Reserved for user 01; Can perform all system functions and assign codes.
Can only perform security functions.
Cannot perform system functions reserved for the master user.
Can only arm the system. Cannot disarm or do other functions
Can arm the system and bypass zones, but cannot disarm the system unless the
system was armed with this code. This code is typically assigned to someone (e.g.,
babysitter or cleaner) who has a need to arm/disarm the system only at certain
times.
Intended for use when you are forced to disarm or arm the system under threat.
When used, the system will act normally, but can silently notify the Central
Monitoring Station of your situation, if that service has been provided.
To Change a User's Code
Changing the Master code
Enter Current Master code + CODE key [8] + 01 + 4-digit new code + 4-digit new code again.
Changing a User code
Ent er M ast er code + COD E k ey [8] + 2-t wo digi t user no. + 4-digit new user ’s code.
To Delete a User
Ent er M ast er code + COD E k ey [8] + 2-digi t user code t o be del et ed + # + 0. A single
confir mat ion t one wi ll be hear d and t he code i s no l onger funct i onal.
–4–
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
CHIME MODE
Your syst em can be set t o aler t you t o t he opening of a door or window whil e i t is di sar med by using CH I M E
mode. When act ivat ed, t hr ee t ones sound at t he K eypad whenever a pr ot ect ed per imet er door or window is
opened, and t he “N ot Ready” message i s displ ayed. Pr essing t he READ Y [* ] key displ ays t he open pr ot ect i on
point s.
Not e t hat Chi me mode can be act ivat ed only when t he syst em i s di sar med.
1. T o tur n Chime M ode on, ent er t he secur it y code and pr ess t he CH I M E k ey [9].
2. T o tur n Chime M ode off, ent er t he secur i t y code and pr ess t he CH I M E k ey again.
KEYPAD TONES
When t he K eypad i s gener at ing a per i odic beep (once per minut e), pr essing t he [* ] key pr ovides mor e
infor mat ion.
When t he syst em i s ar med and t her e i s a t r oubl e condit ion, t he K eypad di splays “Device Tr oubl e”. Pr essing
t he [* ] k ey pr ovides mor e i nfor mat i on.
QUICK EXIT
To st ar t Quick Exi t when enabled.
St ay M ode – Ent er U ser code + STAY key.
I nst ant M ode – Ent er User code + I N STAN T k ey
Night -St ay M ode – Wit h t he syst em ar med in N ight -St ay M ode and t he exit delay expir ed,
ent er User code + STAY k ey + STAY key.
HOST CHECK-IN
I f H ost Check-I n int er val i s set t o 200 seconds, “Download Com/Upl oad Compl et ed” message i s di splayed at
t he K eypad ever y 200 seconds.
TEST MODE
Use Test mode t o check each pr ot ect i on point for pr oper oper at i on.
Test ing should be conduct ed week ly t o ensur e pr oper oper at i on.
1. Disar m t he syst em and cl ose all pr ot ect ed windows, door s, et c.
2. Ent er t he M ast er code + [5] (TEST), t hen pr ess 1.
3. L ist en. The ext er nal sounder should sound for about 1 second t hen t ur n off.
4. Faul t al l zones in t ur n and list en for t hr ee beeps fr om t he k eypad. I D of each fault ed point should appear
on t he k eypad di splay. The di splay cl ear s when t he zone is closed. Not e t hat if wir el ess mot ion det ect or s
ar e used, t her e is a 3-minut e delay bet ween act ivat i ons. Thi s conser ves bat t er y life.
5. Test all smok e and CO det ect or s foll owing t he manufact ur er 's inst r uct i ons and check t he di splay.
6. When all zones have been check ed and ar e int act (cl osed), t her e should be no zone ident ificat ion
number s displ ayed on t he keypad.
7. Exit t est mode: secur it y code + [1] (OFF).
N OT E S:
• The keypad sounds a singl e beep about ever y 60 seconds as a r eminder t hat t he syst em i s in t he Test
mode.
• Alar m messages ar e not sent t o your Cent r al St at ion while Test mode i s on.
• I f a pr obl em is exper ienced wit h any pr ot ect i on point (no confir ming sounds, no di splay), cal l for ser vice
immedi at ely.
• I f t he t est mode i s inadver t ent ly l eft act ive, it aut omat ically t ur ns off aft er 30 minut es. Dur ing t he final
five minut es, t he k eypad will emit a doubl e beep ever y 30 seconds.
–5–
REPLACING THE BATTERY IN A WALL MOUNTED KEYPAD
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
1. Remove t he r et aining scr ew at t he bot t om of t he K eypad.
2. Pr ess upwar d wit h your t humbs on t he bot t om edge of t he K eypad housing and slide t he K eypad up wi t h
r espect t o t he wall mount i ng plat e, r emoving t he K eypad fr om t he wall mount ing plat e.
3. Remove t he power har ness on t he old bat t er y pack t hat connect s t o t he pr int ed cir cuit boar d.
4. L ift t he old bat t er y pack fr om t he K eypad and r eplace wit h t he new bat t er y pack.
5. Connect t he power har ness t o t he pr int ed cir cuit boar d.
6. Replace t he K eypad ont o t he wall mount ing plat e and secur e wi t h t he r et aining scr ew.
N OT E: Aft er r epl acing t he bat t er y and r eat t aching t he K eypad t o t he mount i ng plat e, ent er t he 4-digit
secur i t y code + OFF sequence t wice t o clear any t r ouble condi t ion.
REPLACING THE BATTERY IN A DESK MOUNTED KEYPAD
1. Place t he K eypad face down on a l evel sur face.
2. Remove t wo scr ews and lift up Desk St and up and away fr om t he K eypad t o expose t he bat t er y pack.
3. Remove t he power har ness on t he old bat t er y pack t hat connect s t o t he pr int ed cir cuit boar d.
4. L ift t he old bat t er y pack fr om t he K eypad and r eplace wit h t he new bat t er y pack.
5. Connect t he power har ness t o t he pr int ed cir cuit boar d.
6. Place t he t abs on t he Desk St and int o t he appr opr iat e slot s and secur e wit h t wo scr ews.
N OT E: Aft er r epl acing t he bat t er y and r eat t aching t he K eypad t o t he mount i ng plat e, ent er t he 4-digit
secur i t y code + OFF sequence t wice t o clear any t r ouble condi t ion .
–6–
THE LIMITATIONS OF THIS ALARM SYSTEM
PLEASE GO TO THE BOTTOM OF
THIS PAGE FOR FCC / IC AGENCY
STATEMENTS.
While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system,
whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. For example:
Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or disconnect an alarm warning
device.
•
Intrusion detectors (e.g., passive infrared detectors), smoke detectors, and many other sensing devices will not work without power. Battery-operated
devices will not work without batteries, with dead batteries, or if the batteries are not put in properly. Devices powered solely by AC will not work if their AC
power supply is cut off for any reason, however briefly.
•
Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver. Even if the signal path has been recently
checked during a weekly test, blockage can occur if a metal object is moved into the path.
•
A user may not be able to reach a panic or emergency button quickly enough.
•
While smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not activate or provide early warning for a
variety of reasons in as many as 35% of all fires, according to data published by the Federal Emergency Management Agency. Some of the reasons smoke
detectors used in conjunction with this System may not work are as follows. Smoke detectors may have been improperly installed and positioned. Smoke
detectors may not sense fires that start where smoke cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors.
Smoke detectors also may not sense a fire on another level of a residence or building. A second-floor detector, for example, may not sense a first-floor or
basement fire. Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of fire every time. In general, detectors may not
always warn about fires caused by carelessness and safety hazards like smoking in bed, violent explosions, escaping gas, improper storage of flammable
materials, overloaded electrical circuits, children playing with matches, or arson. Depending upon the nature of the fire and/or the locations of the smoke
detectors, the detector, even if it operates as anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or
death
•
Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in their installation manual. Passive Infrared
Detectors do not provide volumetric area protection. They do create multiple beams of protection, and intrusion can only be detected in unobstructed areas
covered by those beams. They cannot detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or
windows. Mechanical tampering, masking, painting or spraying of any material on the mirrors, windows or any part of the optical system can reduce their
detection ability. Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of protected area approaches the
temperature range of 90° to 105°F, the detection performance can decrease.
•
Alarm warning devices such as sirens, bells, or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open
doors. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the
bedrooms. Even persons who are awake may not hear the warning if the alarm is muffled from a stereo, radio, air conditioner or other appliance, or by
passing traffic. Finally, alarm warning devices, however loud, may not warn hearing-impaired people or waken deep sleepers.
•
Telephone lines needed to transmit alarm signals from a premises to a central monitoring station may be out of service or temporarily out of service.
Telephone lines are also subject to compromise by sophisticated intruders.
•
Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect themselves from the emergency
situation. In the case of a monitored alarm system, authorities may not respond appropriately.
•
This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed to last as long as 10 years, the
electronic components could fail at any time.
The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This alarm system should be tested
weekly to make sure all sensors and transmitters are working properly.
Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for insurance. Homeowners, property owners,
and renters should continue to act prudently in protecting themselves and continue to insure their lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved ones to learn about these
developments.
•
FEDERAL COMMUNICATIONS COMMISSION & INDUSTRY CANADA STATEMENTS FOR TSSBU111011U
FCC ID: CFS8DLTSSCBASE, IC: 573F-TSSCBASE, IC MODEL: TSSCBASE
The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. Unauthorized changes
or modifications could void the user's authority to operate the equipment.
CLASS B DIGITAL DEVICE STATEMENT
This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your information:
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions,
may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance
with the specifications in Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• If using an indoor antenna, have a quality outdoor antenna installed.
• Reorient the receiving antenna until interference is reduced or eliminated.
• Move the radio or television receiver away from the receiver/control.
• Move the antenna leads away from any wire runs to the receiver/control.
• Plug the receiver/control into a different outlet so that it and the radio or television receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA CLASS B STATEMENT
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC / IC STATEMENT
This device complies with Part 15 of the FCC Rules, and RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la partie 15 des règles de la FCC & de RSS 210 des Industries Canada. Son fonctionnement est soumis aux conditions suivantes: (1)
Cet appareil ne doit pas causer d’interférences nuisibles. (2) Cet appareil doit accepter toute interférence reçue y compris les interférences causant une réception
indésirable.
RF Exposure
Warning – The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 7.8 inches (20 cm) from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multitransmitter product procedures.
Mise en Garde -- Exposition aux Frequences Radio: L'antenne (s) utilisée pour cet émetteur doit être installée à une distance de
séparation d'au moins 7,8 pouces (20 cm) de toutes les personnes.
–7–
PLEASE GO TO THE BOTTOM OF
PAGE 7 FOR FCC / IC AGENCY
STATEMENTS.
LIMITED WARRANTY
Terms and Conditions Applying to Sale of Equipment
1. Limited Warranty.
Any part of the system, including the wiring, installed under this Agreement which proves to be defective in material or workmanship within 90
days of the date of completion of installation will be repaired or replaced at ADT's option with a new functionally operative part. Labor and
material required to repair or replace such defective components or to make mechanical adjustments to the system will be free of charge for a
period of 90 days following the completion of the original installation.
This warranty is extended only to the original consumer purchaser of the system and may be enforced only by such person.
To obtain service under this warranty, call or write our local ADT Service Department at the telephone number or address found in your local
yellow pages.
Service pursuant to the warranty will be furnished only during ADT's normal working hours 8:00A.M. to 4:30P.M., Monday through Friday,
except holidays. Services rendered outside the normal working hours of ADT are not within the scope of this warranty and any services
requested to be performed at such times shall be charged for at ADT's then applicable rates for labor and material.
This warranty does not apply to the conditions listed below, and in the event customer calls ADT for service under the warranty and upon
inspection it is found that one of these conditions has led to the inoperability or apparent inoperability of the system, a charge will be made for
the service call of the ADT representative, whether or not he actually works on the system. Should it actually be necessary to make repairs to
the system due to one of the "conditions Not Covered By Warranty", a charge will be made for such work at ADT's then applicable rates for
labor and material.
Conditions Not Covered By Warranty.
Damage from accidents, acts of God, alterations, misuse, tampering or abuse. B. Failure of the customer to properly close or secure a door,
window, or other point protected by a burglar alarm device. C. Failure of customer to properly follow operating instructions provided by ADT at
time of installation or at a later date. D. Trouble in leased telephone. E. Trouble due to interruption of commercial power. F. Battery
replacements.
This warranty is in lieu of all other express warranties. Any implied warranties of merchantability and fitness for a particular purpose are limited
in duration to a period of 90 days from the date of completion of installation. The exclusive remedy of the customer hereunder shall be repair
or replacement as stated above. Under no circumstances shall ADT be liable to the customer or any other person for incidental or
consequential damages of any nature, including without limitation, damages for personal injury or damages to property, and, however
occasioned, whether alleged as resulting from breach of warranty by ADT, the negligence of ADT, or otherwise, ADT's liability will in no event
exceed the purchase price of the system. Some states may not allow limitations on how long an implied warranty lasts, or the exclusion or
limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you, unless a longer period is
required by applicable law. Any action against ADT in connection with a system must be commenced within one year after the cause of action
has occurred.
No agent, employee or representative of ADT or any other person is authorized to modify this warranty in any respect.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
2.
Installation.
ADT agrees to install the equipment in a workmanlike manner in accordance with the following conditions:
Customer will make premises available without interruption during ADT normal working hours 8:00A.M. to 4:30P.M., Monday through Friday,
except Holidays. B. Customer understands that the installation will necessitate drilling into various parts of the premises: ADT intends,
generally, to conceal wiring in the finished areas of the premises; however, there may be areas which, due to construction, decoration, or
furnishing of the premises, ADT determines, in its sole discretion, that it would be impractical to conceal wiring and, in such cases, wiring will
be exposed. C. Customer agrees to provide 110 VAC electrical outlets at designated locations for equipment requiring AC power. D.
Customer to provide for lifting and replacing carpeting, if required, for installation of floor mats or wiring.
ALL RIGHTS RESERVED
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means – electronic,
mechanical, photocopying, recording, or otherwise without the written permission of ADT Security Services. The material in this publication is
for information purposes and subject to change without notice. ADT Security Services assumes no responsibility for any errors which may
appear in this publication.
ADT Security Services
1501 Yamato Rd
Boca Raton, FL 33431
Copyright © 2013
ÊK0667DŠ
800-13959 11/13 Rev. B

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2014:04:08 16:17:29-04:00
Modify Date                     : 2014:04:11 14:24:06-04:00
Has XFA                         : No
Language                        : EN-US
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:04:11 14:24:06-04:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:5eb1cad9-1664-4d18-9fce-1a73d9a075ce
Instance ID                     : uuid:745ace30-ed29-42b6-bfcf-cd37eeb160cb
Format                          : application/pdf
Title                           : 
Creator                         : 
Producer                        : Adobe PDF Library 11.0
Page Layout                     : OneColumn
Page Count                      : 8

EXIF Metadata provided by EXIF.tools