Honeywell CCB01BF Bluetooth Charging Base User Manual CCB01 MULT RS
Honeywell International Inc Bluetooth Charging Base CCB01 MULT RS
User Manual
Note: Refer to your user’s guide for information about cleaning your device. Connecting the Scanner Keyboard Wedge: USB: Getting Started Turn off the computer’s power before connecting the base, then power up the computer once the base is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. The green LED on the base flashes to indicate the scanner’s instant charge pack is charging. The scanner must be returned to the base when not in use. A scanner charged on the base with the power supply for 35 seconds will result in 100 scans, with one scan every second. Xenon™ 1902G-BF CCB01-010BT-BF Battery-Free Wireless Area-Imaging Scanner and Charge Base Power Supply Assembly (if included) Quick Start Guide RS232 Serial Port: Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español. Para Português, acesse www.honeywellaidc.com.br. Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster. Перейти на русскоязычный сайт www.honeywellaidc.com. Pro češtinu jdi na www.honeywellaidc.com. Pre slovenčinu choď na www.honeywellaidc.com 日本語 : www.honeywellaidc.com をご覧ください。 如要到中国 www.honeywellaidc.com(简体)。 查看繁体版请登陆 www.honeywellaidc.com Note: The power supply must be ordered separately, if needed. 한글 www.honeywellaidc.com 로 이동합니다 . Rev (a) 11/16 RS485: LED Indicators - Scanner Instant Charge Pack Green LED Yellow LED Condition On continuously Slow blink Battery has full charge Battery less than 100% capacity Fast blink Battery less than 50% capacity Off Fast blink Under 50 scans available Off Scanner not in cradle Reading Techniques Base LED Sequences and Meaning Red LED - Host Communication Red LED Condition Off On continuously Power off, USB suspend Power on, system idle Short blinks. Occurs while transferring data to the host port. Receiving data The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Hold the scanner over the bar code, pull the trigger, and center the aiming beam on the bar code. The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code. Hold the scanner close to smaller bar codes, and farther away from large bar codes to get a proper read. If the bar code is highly reflective (e.g., laminated), you may need to tilt the scanner at an angle so the bar code can be scanned. Note: If the scanner beeps 3 times when scanning a bar code, the link has not been established. If the scanner beeps once, the link has been established. Standard Product Defaults The following bar code resets all standard product default settings. COM Port number. Apple® Macintosh computers recognize the scanner as a USB CDC class device and automatically use a class driver. USB Serial Standard Product Defaults Note: No extra configuration (e.g., baud rate) is necessary. RS485 Interface The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to program the terminal, then power cycle the cash register. USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard. USB PC Keyboard IBM Port 9B HHBCR-1 Interface Keyboard Country IBM Port 9B HHBCR-2 Interface Note: For additional RS485 interface selections, see the User’s Guide for your product at our website, www.honeywellaidc.com. USB Serial Scan the following code to program the scanner to emulate a regular RS232-based COM Port. If you are using a Microsoft® Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The driver will use the next available Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from page 2, then the Save bar code to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than the United States: @ | $ # { } [ ] = / ‘ \ < > ~ Program Keyboard Country Country Code Scan Country Code Scan Belgium Denmark Finland France Germany/Austria Great Britain Italy Norway Spain Switzerland USA (Default) 10 Override Locked Scanner Temporary Streaming Presentation™ Mode If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner bar code with a new scanner, and place that scanner in the base. The locked link will be overridden; the broken or lost scanner’s link with the base will be removed, and the new scanner will be linked. Note: You must use external power for Temporary Streaming Presentation Mode. Override Locked Scanner Unlinking the Scanner Save Note: For a complete list of country codes, see the User’s Guide for your product at our website, www.honeywellaidc.com. If the base has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous scanner is unlinked, it will no longer communicate with the base. Scan the Unlink Scanner bar code to unlink a scanner. When in Streaming Presentation Mode, the scanner’s aimer goes out after a short time, but the scan illumination remains on all the time to continuously search for bar codes. Press the page button on the base to put the scanner into Temporary Streaming Presentation Mode until the timeout occurs (default is 15 seconds). If a bar code is scanned before the timeout is reached, the timer starts over. Press the page button on the base again to end Temporary Streaming Presentation Mode. If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inadvertently placed into the base. If you do place a different scanner into the base, it will charge the scanner, but the scanner will not be linked. Note: To change the timeout, see the User’s Guide for your product at our website, www.honeywellaidc.com. Unlink Scanner Trigger The following bar codes will allow you to use the scanner in Manual Trigger - Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a bar code). Locked Link Mode (Single Scanner) To use a different scanner, you need to unlink the original scanner by scanning the Unlink Scanner bar code. Remove Suffix Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. When the scanner is out of the base, the page button works normally. Temporary Streaming Presentation Mode Locked Link Add Tab Suffix Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.honeywellaidc.com. Function Code Transmit When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in your User’s Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted. Manual Trigger - Normal (Default) Enable (Default) Add CR Suffix Presentation Mode Data Format Editor Instructions Disable Limited Warranty Programming Chart The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywellaidc.com. 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3. Terminal Type: scan 099 for any terminal type 4. Code I.D.: scan 99 for any bar code type 5. Length: scan 9999 for any length bar code. 6. Editor commands: use the Programming Chart that follows. For warranty information, go to www.honeywellaidc.com and select Resources>Warranty. For patent information, refer to www.hsmpats.com. User Documentation For localized versions of this document, and to download the User’s Guide, go to www.honeywellaidc.com. 7. Scan Save to save your entries. Clear All Data Formats Save Save EZConfig-Scanning To access additional features for the scanner use EZConfig-Scanning, an online configuration software tool, available from our website at www.honeywellaidc.com. Technical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. Enter Data Format Patents HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2016 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Preliminary Draft 11/30/16 Rev (c) FCC Part 15 Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC authorization to operate this equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF Exposure The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. Para su uso en México, la operación de este equipo está sujeta a las siguientes dos condiciones: 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial. 2. Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. Conformité à la règlementation canadienne Canadian Compliance This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class B performance. Utiliser uniquement des câbles de données blindés avec ce système. L’appareil a été testé avec des câbles de moins de 3 mètres. Les câbles de longueur supérieure à 3 mètres peuvent ne pas satisfaire à la performance de la classe B. Utilisez uniquement des câbles de données blindés avec ce système. Ce dispositif a été testé avec des câbles de moins de 3 mètres. Il est possible que les câbles de plus de 3 mètres ne permettent pas d’atteindre des performances de classe B. Utilizzare solo cavi dati schermati con questo sistema. Questa unità è stata testata con cavi di lunghezza inferiore a 3 metri. I cavi di lunghezza superiore a 3 metri potrebbero non essere conformi alle prestazioni di classe B. Für dieses System nur abgeschirmte Datenkabel verwenden. Dieses System wurde mit Kabeln unter 3 Metern Länge geprüft. Kabel mit einer Länge von über 3 Metern erfüllen möglicherweise nicht die Richtlinien der Klasse B. 此系统仅能使用屏蔽数据电缆。 此设 备是以短于 3 米的电缆进行的测试。 长度超过 3 米的电缆可能无法满足 B 级性能。 此系統只能使用包覆的資料傳輸線。 此裝置是使用不到 3 公尺長的電纜進 行測試。 超過 3 公尺長的電纜可能無 法達到 B 級裝置效能。 このシステムにはシールド付きデー タケーブルのみを使用してくださ い。この装置は長さ 3 m 以下のケー ブルでテストされています。3 m 以 上のケーブルはクラス B の性能を満 たさない場合があります。 이 시스템에는 차폐된 데이터 케이블 만 사용하십시오 . 본 장치는 3 미터 미만의 케이블로 테스트를 받았습니 다 . 3 미터를 초과하는 케이블을 사용 하면 Class B 성능을 만족시키지 못할 수 있습니다 . Используйте с этой системой только экранированные кабели передачи данных. Это устройство прошло испытания с использованием кабелей длиной менее 3 метров. Рабочие характеристики кабелей длиной свыше 3 м могут не соответствовать классу В. The CE marking indicates compliance with the following directives: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Recast) In addition, complies to 2014/35/EU Low Voltage Directive, when shipped with recommended power supply. European contact: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands Le marquage CE indique la conformité avec les directives suivantes : • 1995/5/CE R & TTE • 2011/65/UE – RoHS (Refonte) De plus, ce produit est conforme à la Directive européenne 2014/35/EU relative aux basses tensions lorsqu’il est expédié avec le bloc d’alimentation recommandé. Personne-ressource en Europe : Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Les Pays-Bas Le marquage CE indique la conformité aux directives suivantes : • 1995/5/CE R & TTE • 2011/65/UE RoHS (refonte) De plus, indique la conformité à la directive 2014/35/EU Basse tension, lorsque le dispositif est livré avec l’alimentation électrique recommandée. Contact en Europe : Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Pays-Bas La marcatura CE indica conformità alle seguenti direttive: • Direttiva R&TTE 1995/5/CE • Direttiva RoHS 2011/65/UE (rifusione) È inoltre conforme ai sensi della Direttiva bassa tensione 2014/35/EU, se spedito con l'alimentatore consigliato. Contatto in Europa: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Paesi Bassi Die CEKennzeichnung signalisiert die Konformität mit folgenden Richtlinien: • 1995/5/EG R&TTE • 2011/65/EU RoHS (Recast) Weiterhin entspricht dieses Produkt der Niederspannungsrichtlinie 2014/ 35/EU, wenn es mit dem empfohlenen Netzteil geliefert wird. Ansprechpartner Europa: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Niederlande CE 标记表示符合以 下指令: • 1995/5/EC R&TTE • 2011/65/EU RoHS (新版) 此外,在随附建议的电源时,设备还 符合 2014/35/EU 低电压指令的要 求。欧洲联系信息: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands CE 標記表示符合下 列指令: • 1995/5/EC R&TTE • 2011/65/EU RoHS (重訂) 此外,出廠時如附帶建議的電源,亦 符合 2014/35/EU 低電壓指令。歐洲 聯絡資訊: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands CE マークは、本装置 が次の指令に準拠し ていることを示しま す。 • 1995/5/EC R&TTE • 2011/65/EU RoHS ( 改正 ) また、推奨電源付きで出荷されてい る場合は、2014/35/EU Low Voltage Directive にも準拠しています。欧州 でのお問い合わせ : Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands CE 마크는 다음 지침 을 준수함을 나타냅 니다 . • 1995/5/EC R&TTE • 2011/65/EU RoHS (Recast) 또한 , 권장 전원 공급장치와 함께 배 송된 경우에는 2014/35/EU Low Voltage Directive( 저전압 지침 ) 를 준수합니다 . 유럽 연락처 : Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands Маркировка CE означает соответствие требованиям следующих директив: • 1995/5/EC Директива о радиои телекоммуникацио нном оборудовании • 2011/65/EU Директива RoHS (исправленная) Кроме того, соответствует требованиям директивы по низковольтному оборудованию 2014/35/EU при поставке с рекомендованным источником питания. Контактное лицо в Европе: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands Class II Catégorie II Classe II Klasse II Utilice sólo cables de datos blindados con este sistema. Esta unidad se ha probado con cables de longitud inferior a 3 metros. Cables superiores a 3 metros quizá no satisfagan los requisitos de rendimiento de la clase B. Use únicamente cables protegidos para datos con este sistema. Esta unidad ha sido evaluada con cables de menos de 3 metros. Es posible que los cables de más de 3 metros no cumplan con el desempeño de clase B. ﺗﻢ.اﺳﺘﺨﺪم ﻓﻘﻂ ﻛﺎﺑﻼت اﻟﺒﻴﺎﻧﺎت اﳌﺼﻔﺢ ﻣﻊ ﻫﺬا اﻟﻨﻈﺎم . أﻣﺘﺎر3 اﺧﺘﺒﺎر ﻫﺬه اﻟﻮﺣﺪة ﺑﻮاﺳﻄﺔ ﻛﺎﺑﻼت ﻳﻘﻞ ﻃﻮﻟﻬﺎ ﻋﻦ أﻣﺘﺎر ﻣﻊ3 ﻗﺪ ﻻ ﺗﺘﻄﺎﺑﻖ اﻟﻜﺎﺑﻼت اﻟﺘﻲ ﻳﺰﻳﺪ ﻃﻮﻟﻬﺎ ﻋﻦ .B أداء اﻟﻔﺌﺔ יש להשתמש בכבלי נתונים מסוככים,במערכת זו מכשיר זה נבדק עם כבלים באורך של פחות.בלבד 3 ייתכן שכבלים שאורכם עולה על. מטרים3-מ מטרים לא יעמדו בדרישות הביצועים של מכשירים .B מדרגה La indicación CE indica el cumplimiento con las siguientes directivas: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Reformulada) Además, cumple con la directiva de bajo voltaje 2014/35/EC cuando se envía con la fuente de poder recomendada. Contacto europeo: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Países Bajos La marca CE indica el cumplimiento de las siguientes normativas: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Refundida) Asimismo, cumple la normativa de bajo voltaje 2014/35/ EU cuando se envía con la fuente de alimentación recomendada. Contacto europeo: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Países Bajos CE : بالمعايير التالية 1995/5/EC R&TTE 2011/65/EU RoHS )(إعادة الصياغة تلتزم بمعيار الجهد المنخفض 2014/35/EU .الطاقة الموصى به Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands A marca CE indica conformidade com as seguintes diretivas: • 1995/5/EC R&TTE • 2011/65/EU RoHS (Reformulação) Além disso, o produto está em conformidade com a Diretiva para baixa tensão 2014/35/ EU, quando fornecido com a fonte de alimentação recomendada. Contato na Europa: Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen Holanda CE 1995/5/EC R&TTE 2011/65/EU RoHS (Recast) 2014/35/EU Hand Held Products Europe B.V. Lagelandseweg 70 6545CG Nijmegen The Netherlands 第 II 類 II 类 Clase II Use somente cabos de dados blindados com este sistema. Esta unidade foi testada com cabos com menos de 3 metros. Cabos com mais de 3 metros não atendem o desempenho de classe B. Class II 2 اﻟﻔﺌﺔ CB Scheme Certified to CB Scheme IEC 60950-1, Second Edition. CB 方案 Plan OC (organismes de certification) Schéma OC Schema CB CB-Zertifizierung CB Scheme CB Scheme CB Scheme Схема CB Certifié selon la norme CEI 60950-1 seconde édition (schéma OC). Certifié CB CEI 60950-1, deuxième édition. CB Scheme IEC 60950-1, Second Edition に認定されています。 Certificato in base allo Schema CB IEC 60950-1, seconda edizione. CB Scheme IEC 60950-1, Second Edition 인증을 받았습니다 . 已通过 CB 方案 IEC 60950-1 第二版 的认证。 經過認證符合 CB Scheme IEC 60950-1 標準第二版。 Patents Brevets Brevets 专利 專利 特許 有关专利信息,请参阅 www.hsmpats.com。 相關專利資訊請參閱 www.hsmpats.com 中的說明。 特許情報については、 www.hsmpats.com を参照してくだ さい。 Product Environmental Information Renseignements relatifs à l’environnement à propos des produits Informations environnementales sur les produits Informazioni ambientali relative al prodotto Informationen zur Umweltverträglichkeit von Produkten 产品环境信息 產品環境資訊 製品の環境情報 제품 환경 정보 有关 RoHS / REACH / WEEE 信息, 请参阅 www.honeywellaidc.com/ environmental 。 請參閱 www.honeywellaidc.com/ environmental 以瞭解 RoHS / REACH / WEEE 資訊。 RoHS / REACH / WEEE に関する情 報については、 www.honeywellaidc.com/ environmental を参照してください。 RoHS / REACH / WEEE 정보는 www.honeywellaidc.com/ environmental 에서 참조하십시오 . For patent information, refer to www.hsmpats.com. Refer to www.honeywellaidc.com/ environmental for the RoHS / REACH / WEEE information. Veuillez consulter le site www.hsmpats.com pour obtenir des renseignements au sujet du brevet. Pour plus d’informations sur les brevets, visitez la page www.hsmpats.com. Reportez-vous à la page www.honeywellaidc.com/ environmental pour obtenir des renseignements concernant les directives RoHS/REACH/WEEE. UL and C-UL Statement 특허 Патенты 특허 정보는 www.hsmpats.com 를 참 조하십시오 . Информация о патентах приведена на веб-странице www.hsmpats.com. Homologué UL et C-UL : UL 60950-1, seconde édition et CSA C22.2 No. 60950-1-07, seconde édition. This product is EMC B grade equipment, intended for residential use. This equipment can be used in any area. Patentes Para obter informações sobre patente, consulte www.hsmpats.com. ﺑﺮاءات اﻻﺧﱰاع ʭʩʨʰʨʴ ﻳُﺮﺟﻰ اﻟﺮﺟﻮع،ﻟﻠﺤﺼﻮل ﻋﲆ ﻣﻌﻠﻮﻣﺎت ﺗﺨﺺ ﺑﺮاءة اﻻﺧﱰاع .www.hsmpats.com إﱃ Información ambiental del producto Información ambiental de producto Consulte www.honeywellaidc.com/ environmental para obtener información sobre RoHS/REACH/ WEEE. Informações ambientais sobre produtos Consulte la información RoHS/ REACH/WEEE en www.honeywellaidc.com/ environmental. ʩʸʶʥʮ ʬʹ ʩʺʡʩʡʱʤ ʲʣʩʮʤ ʺʥʣʥʠ ʭʩʨʸʴʬ :באתר האינטרנט בכתובת www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information. Информация о соответствии требованиям RoHS / REACH / WEEE приведена на сайте www.honeywellaidc.com/ environmental. CB ﻣﺨﻄﻂ ﻣﻌﺘﻤﺪ Para obtener información sobre patentes, consulte www.hsmpats.com. עיין באתר האינטרנט,למידע על פטנטים www.hsmpats.com Экологическая информация о продукции Certificação CB Scheme IEC 609501, Segunda edição. Patentes Para obtener información sobre las patentes, visite www.hsmpats.com. Unter www.honeywellaidc.com/ environmental finden Sie Informationen über RoHS/REACH/ WEEE. 이 기기는 가정용 (B 급 ) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 . . اﻹﺻﺪاراﻟﺜﺎﻧﻲ،CB IEC 60950-1 ﻣﺨﻄﻂ Patentes Patentinformationen sind unter www.hsmpats.com erhältlich. If the following label is attached to your product, the product meets Korean agency approval: Norme UL et C-UL UL and C-UL listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07, Second Edition. CB Scheme Patente Esquema CB Se ha certificado que cumple con el esquema CB IEC 60950-1, segunda edición. IEC המוצר מאושר בהתאם לתקןCB Scheme . מהדורה שניה,CB Scheme של ארגון60950-1 Brevetti Consultare il sito web www.honeywellaidc.com/ environmental per informazioni su RoHS/REACH/RAEE. Esquema CB Se ha certificado que cumple el esquema CB IEC 60950-1, segunda edición. Сертификация согласно схеме CB МЭК 60950-1, издание второе. Per i dettagli sui brevetti, fare riferimento al sito Web www.hsmpats.com. Reportez-vous au site www.honeywellaidc.com/ environmental pour obtenir les informations sur les directives RoHS/ REACH/WEEE. Esquema CB CB-zertifiziert gemäß IEC 60950, Second Edition. Consulte a página www.honeywellaidc.com/ environmental para obter informações sobre as normas RoHS/ REACH/WEEE. ΞΗϧϣϠϟΔϳϳΑϟΕΎϔλϭϣϟ ﯾُرﺟﻰ اﻟرﺟوع إﻟﻰ www.honeywellaidc.com/environmental ﻟﻠﺣﺻول ﻋﻠﻰ ﻣﻌﻠوﻣﺎت ﺣول ﺗوﺟﯾﮭﺎت .RoHS / REACH / WEEE 依據標準 : 低功率射頻電機技術規範 : LP0002 NCC standard: Low power frequency electric machineries technical standard: LP0002 根據交通部低功率管理辦法規定: 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或 使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經 發現有干擾現象 時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信規定作業之無線電信。低功率射頻電 機須忍受合法通信 或工業、科學及醫療用電波輻射性電機設備之干擾。 Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução No. 242/2000 e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br Modelo: CCB01-010BT 1869-15-7084 (01)07898927490171 Modelo: CCB01-010BT-BF 0000-00-0000 (01)078989274901XX 产品中有害物质的名称及含量 部件名称 (Parts Name) (Names and Content of Hazardous Substances in the Product) 有害物质 (Hazardous Substances) 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 (PCB) 外壳 (Housing) 连线 (Cables) 本表格依据 SJ/T11364 的规定编制。(The table is created by SJ/T11364 requirement.) o: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 标准规定的限量要求以下。 (Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in China’s GB/T26572.) x: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 标准规定的限量要求。 (Indicates that this hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in China’s GB/T26572.) Preliminary Draft 11/30/16 This document was prepared and executed in the English language. In the event this document is translated into another language and a conflict arises between the English version and a non-English version, the English version shall prevail, it being recognized and acknowledged that the English language version most clearly expresses the intent of the parties. Any notice or communication given in connection with this document must include a version in the English language. Ce document a été préparé et exécuté dans la langue anglaise. Dans l’éventualité où le document serait traduit dans une autre langue et qu'un litige survenait entre la version en anglais et la version autre qu'en anglais, la version en anglais prévaudra, étant confirmé et reconnu que la version en anglais exprime de façon plus précise l’intention des parties. Tout avis ou toute communication relatif à ce document doit inclure une version en anglais. Ce document a été préparé et finalisé en anglais. Si ce document est traduit dans une autre langue et si un conflit survient entre la version en anglais et la version traduite, la version en anglais prévaudra tant il est reconnu et établi qu’elle exprime le plus clairement les intentions des parties. Tout avis ou communication produit en relation avec ce document doit comporter une version en anglais. Questo documento è stato preparato e redatto in lingua inglese. In caso di traduzione in altre lingue, nell’eventualità sorgano conflitti fra la versione non inglese e quella inglese, prevarrà quest’ultima in quanto viene riconosciuto e accettato che la versione in lingua inglese esprime più chiaramente gli accordi fra le parti. Qualsiasi notifica o comunicazione inviata in rapporto a questo documento deve includere una versione in lingua inglese. Dieses Dokument wurde in englischer Sprache erstellt und ausgefertigt. Wenn dieses Dokument in eine andere Sprache übersetzt wird, und ein Konflikt zwischen der englischen und nicht-englischen Fassung auftritt, hat die englische Fassung Vorrang, da die Parteien anerkennen, dass die Fassung in englischer Sprache ihren Absichten am deutlichsten Ausdruck verleiht. Alle Hinweise oder Mitteilungen in Zusammenhang mit diesem Dokument müssen auch in einer Fassung in englischer Sprache erfolgen. Originalmente, este documento se creó y redactó en inglés. En caso de que se traduzca a otro idioma y surja un conflicto entre la versión en inglés y la versión en otro idioma, prevalecerá la versión en inglés. Se reconoce y admite que, en la versión en inglés, expresa la intención de las partes con más claridad. Cualquier aviso o comunicación proporcionada en relación con este documento debe incluir una versión en inglés. Este documento se preparó y redactó en inglés. En caso de que se traduzca a otro idioma y surja algún conflicto entre la versión en inglés y la del idioma extranjero, prevalecerá la versión en inglés, dado que se reconoce y admite que la versión en inglés expresa más claramente la intención de las partes. Cualquier aviso o comunicación proporcionada en relación con este documento deberá incluir una versión en inglés. Este documento foi preparado e feito em língua inglesa. Se este documento for traduzido para outro idioma e surgirem conflitos entre a versão em inglês e a versão no outro idioma, a versão em inglês prevalecerá, sendo reconhecido e atestado que a versão em língua inglesa expressa mais claramente a intenção das partes. Qualquer comunicação ou aviso relacionado a este documento deve conter a versão em inglês. 本文档以英文撰写。如果本文档的其他语言版本与英文版本存 在冲突,则以英文版本为准。各方一致认可和同意英文版本最 清楚地表达了各自的意图。任何与本文档相关的声明或沟通, 都应包括英文版本。 本文件的原稿是以英文撰寫。如果本文件翻譯為其他語言,而 英文版和非英文版之間產生衝突,應以英文版為準,並且各方 一致認同並確認英文版最能夠清楚地表達各方的意圖。凡是所 有與本文件有關之公告或通訊,都必須包含英文的版本。 本書は英語で作成され発行されています。本書を他の言語に 翻訳し、英語版と英語以外の版に矛盾が生じた場合は、関係 者の意図を最も明確に表すものが英語版であることを認識お よび承諾し、英語版が優先するものとします。さらに、本書 に関連して与えられる告知や通知は、すべて英語版を含むも のとします。 본 문서는 영어로 준비되어 작성된 것입니다. 본 문서를 다른 언 어로 번역했는데 영문본과 번역본 사이에 상충하는 부분이 발생 하는 경우에는 영문본이 우선하며, 영문본이 양쪽 당사자의 의 도를 가장 명확하게 표현하고 있음을 인식하고 확인합니다. 본 문서와 관련한 모든 고지 또는 전달 사항에는 영문본이 동봉되 어야 합니다. Данный документ был подготовлен и выполнен на английском языке. При переводе данного документа на другой язык, в случае возникновения противоречий между английской версией и версией на другом языке, английская версия имеет преимущественную силу. Данным признается, что версия документа на английском языке наиболее четко выражает намерения сторон. Любые уведомления или письма, направляемые в связи с данным документом, должны включать в себя версию на английском языке. For warranty information, go to www.honeywellaidc.com and click Resources > Warranty. Pour obtenir des informations sur la garantie, consultez le site www.honeywellaidc.com et cliquez sur Ressources > Garantie. Per informazioni sulla garanzia, andare a www.honeywellaidc.com e fare clic su Resources > Warranty. Die Garantiebestimmungen finden Sie unter www.honeywellaidc.com. Klicken Sie dort auf Ressourcen > Garantie. Para obtener información sobre la garantía, visite www.honeywellaidc.com y haga clic en Recursos > Garantía. Para obtener información sobre la garantía, visite www.honeywellaidc.com y haga clic en Recursos > Garantía. Para obter informações sobre a garantia, vá para www.honeywellaidc.com e clique em Resources (Recursos) > Warranty (Garantia). 欲了解保修信息,请访 www.honeywellaidc.com,单击 Resources (资源)> Warranty (保修)。 如需檢視保固資訊,請瀏覽 www.honeywellaidc.com,然後按 一下 Resources > Warranty。 保証については、www.honeywellaidc.com にて、Resources > Warranty とクリックしてください。 보증 정보를 보려면 www.honeywellaidc.com 으로 이동하여 Resources > Warranty 를 클릭하십시오 . Подробную информацию о гарантии см. на сайте www.honeywellaidc.com в разделе Resources > Warranty. Informace o záruce naleznete na stránce www.honeywellaidc.com po kliknutí na Resources > Warranty. Ak chcete získať informácie o záruke, prejdite na stránku www.honeywellaidc.com a kliknite na Resources (Zdroje) > Warranty (Záruka). Aby uzyskać informacje na temat gwarancji, wejdź na stronę www.honeywellaidc.com i kliknij Zasoby > Gwarancja. Garanti bilgileri için www.honeywellaidc.com adresine gidin ve Kaynaklar > Garanti ögelerini tıklayın. נא פנו לכתובת,למידע אודות האחריות ﺗﻔﺿل ﺑزﯾﺎرة،ﻟﻠﺣﺻول ﻋﻠﻰ ﻣﻌﻠوﻣﺎت ﺑﺷﺄن اﻟﺿﻣﺎن .Resources > Warranty והקליקוwww.honeywellaidc.com . واﻧﻘر ﻓوق اﻟﺿﻣﺎن < اﻟﻣواردwww.honeywellaidc.com במקרה שמסמך זה יתורגם לשפה.מסמך זה נערך והופק בשפה האנגלית ,אחרת ותתגלה סתירה בין משמעות הגרסה באנגלית והגרסה המתורגמת מוסכם על הצדדים כי הגרסה.הגרסה באנגלית תהיה הגרסה הקובעת כל הודעה.בשפה האנגלית מבטאת באופן הברור ביותר את כוונת הצדדים .שתימסר בהקשר למסמך זה חייבת לכלול את הגרסה בשפה האנגלית إذا ﺗﺮﺟﻤﺔ ﻫﺬا.ﺗﻢ إﻋﺪاد ﻫﺬا اﳌﺴﺘﻨﺪ وﺗﻨﻔﻴﺬه ﺑﺎﻟﻠﻐﺔ اﻹﻧﺠﻠﻴﺰﻳﺔ اﳌﺴﺘﻨﺪ إﱃ ﻟﻐﺎت أﺧﺮى وﻛﺎن ﻫﻨﺎك اﺧﺘﻼف اﻹﺻﺪار اﻹﻧﺠﻠﻴﺰي وإﺻﺪار ﺣﻴﺚ إن اﻹﺻﺪار، ُ ﺟﻰ اﻻﻟﺘﺰام ﺟﺎء ﰲ اﻹﺻﺪار اﻹﻧﺠﻠﻴﺰي،آﺧﺮ ﻳﺠﺐ أن.اﻹﻧﺠﻠﻴﺰي ﻫﻮ اﻟﺬي ﻳﻌﱪ ﺑﻮﺿﻮح وﴏاﺣﺔ ﻋﻦ ﻧﻴﺔ اﻷﻃﺮاف ﺗﺸﻤﻞ أﻳﺔ إﺷﻌﺎرات أو اﺗﺼﺎﻻت ذات ﺻﻠﺔ ﺑﻬﺬا اﳌﺴﺘﻨﺪ ﻋﲆ إﺻﺪار ﺑﺎﻟﻠﻐﺔ .اﻹﻧﺠﻠﻴﺰﻳﺔ Honeywell International Inc. 9680 Old Bailes Road Fort Mill, SC 29707 USA CCB01-MULT-RS Rev (c) 12/16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Language : en XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 15.0 (Windows) Creator Tool : FrameMaker 12.0.4 Modify Date : 2017:01:19 14:16:37+08:00 Create Date : 2006:06:09 14:06:35Z Metadata Date : 2017:01:19 14:16:37+08:00 Format : application/pdf Title : CCB01-MULT-RS.fm Creator : E412110 Document ID : uuid:6d57d12a-ef5b-4414-829f-ab36d0ab833f Instance ID : uuid:b19230d5-a18a-427e-9ecc-7287d61b0346 Page Mode : UseNone Page Count : 5 Author : E412110EXIF Metadata provided by EXIF.tools