Honeywell CN80L1N Dolphin CN80 User Manual Dolphin CT60 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3783781
Application ID	QfxlFnFv+8Loy52+FoWthw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.07kB (1588413 bits)
Date Submitted	2018-03-16 00:00:00
Date Available	2018-09-13 00:00:00
Creation Date	2005-11-18 12:53:09
Producing Software	Acrobat Distiller 18.0 (Windows)
Document Lastmod	2018-02-07 20:51:50
Document Title	Dolphin CT60 Quick Start Guide
Document Creator	FrameMaker 2017.0.3
Document Author:	Honeywell

Dolphin™ CN80
/1
powered by Android™ 7
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
Quick Start Guide
CN80-A7-EN-QS Rev (a)
2/18
Out of the Box
Make sure that your shipping box contains these items:
• Dolphin CN80 mobile computer (Model CN80L0N or
CN80L1N)
• Rechargeable 3.85 VDC Li-ion battery
• Product documentation
,2
CN80L0N models do not include a WWAN radio.
el
ea
Memory Card Specifications
se
Note:
/7
/1
If you ordered accessories for your CN80, verify that they are
also included with the order. Be sure to keep the original
packaging in case you need to return the mobile computer for
service.
ra
ft,
ot
fo
rR
Honeywell recommends the use of Single Level Cell (SLC)
industrial grade microSD™ or microSDHC™ memory cards with
Dolphin mobile computers for maximum performance and
durability. Contact a Honeywell sales representative for
additional information on qualified memory card options.
Mobile Computer Features
Battery Status /Notification LED
Receiver Speaker
Good Read LED
/7
/1
Power
Button
,2
Aux
se
Touch Panel
fo
rR
el
ea
Scan
Button
Speakers
Keyboard
(model dependent)
ra
ft,
ot
Scan Button
Microphone
I/O Connector
Note:
Hand strap not shown.
Imager (LED / Laser Aperture)
Laser Safety
Label Location
Camera Lens and
Flash
Volume Buttons
/1
Scan Button
se
,2
/7
microSIM/
microSD Card
Door
ra
ft,
ot
fo
rR
el
ea
Door
Screws
Battery
Battery Latch
Install a microSD Card (SD)
Note:
Format the microSD card before initial use.
Always power off the computer before attempting to
install or remove a card.
1.
Remove the two screws holding the card access door
closed.
2.
Pull gently on the tab to open the door.
Press down gently on the center card holder.
4.
Slide the holder toward the bottom of the unit, and then lift
up the edge.
5.
Insert the microSD card into the card holder with the
contacts facing out.
6.
Close the holder with the card inserted.
7.
Press down gently on the holder and slide it into the locked
position.
8.
Close the card access door.
9.
Install the two screws to secure the door closed.
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
/1
3.
Install a microSIM Card (SIM 1 or SIM 2)
Note:
Model CT60L0N only supports UICC SE NFC technology through
the SIM 1 card socket. On CT60L1N models, the SIM 1 socket
supports both cellular and NFC UICC SE functionality.
Always power off the computer before attempting to
install or remove a card.
Remove the two screws holding the card access door
closed.
2.
Pull gently on the tab to open the door.
/1
/7
,2
Press down gently on one of the following:
the far left card holder for SIM 1 installation, or
•
the far right card holder for SIM 2 installation.
ea
se
•
el
3.
1.
Slide the holder toward the bottom of the unit, and then lift
up the edge.
5.
Insert the SIM card into the card holder with the contacts
facing out.
6.
Close the holder with the card inserted.
7.
Press down gently on the holder and slide it into the locked
position.
8.
Close the card access door.
9.
Install the two screws to secure the door closed.
ra
ft,
ot
fo
rR
4.
Install the Battery
/7
/1
The CN80 mobile computer ships with a Li-ion 3.85 VDC,
22.3 watt-hour battery manufactured for Honeywell
International Inc.
We recommend use of Honeywell Li-ion battery
packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
ot
fo
rR
el
ea
se
,2
ra
ft,
Ensure all components are dry prior to placing the
battery in the computer. Mating wet components
may cause damage not covered by the warranty.
Charge the Mobile Computer
The CN80 mobile computer ships with a partially charged
battery. Charge the battery with a CX80 Series charging device
for a minimum of 4 hours. Using the computer while charging
the battery increases the time required to reach a full charge.
We recommend the use of Honeywell accessories and
power adapters. Use of any non-Honeywell
accessories or power adapters may cause damage not
covered by the warranty.
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
/1
CN80 mobile computers are designed for use with the following
CX80 Series charging accessories: HomeBase, Ethernet
HomeBase, ChargeBase, NetBase, Quad Battery Charger,
Vehicle Power Adapter, Vehicle Dock, and USB Adapter.
Ensure all components are dry prior to mating the
computers and batteries with peripheral devices.
Mating wet components may cause damage not
covered by the warranty.
Turn Power On/Off
To turn the computer on:
• Press and release the Power button.
To turn the computer off:
Press and hold the Power button until the options menu
appears.
2.
Touch Power Off.
3.
When prompted to shut down the computer, touch OK.
,2
You should always power off the computer before removing the
battery.
ea
se
Note:
/7
/1
1.
el
Sleep Mode
ot
fo
rR
Sleep mode automatically turns the touch panel display off and
locks the computer to save battery power when the computer is
inactive for a programmed period of time.
Press and release the Power button to wake the computer.
2.
Drag the
computer.
ra
ft,
1.
toward the top of the display to unlock the
Adjust the Display Sleep Time
To adjust the amount of time before the display sleeps after
inactivity:
1.
Touch
2.
Select the amount of time before the display goes to sleep.
> Settings > Display > Sleep.
3.
Touch
to return to the Home screen.
About the Home Screen
Notification /
Status Bar
Search Bar
/1
Touch
to
initiate a voice
search or
command.
Touch
to
access all apps.
Favorites Tray
Navigation Buttons
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
Home Screen
Panel
To learn how to customize the Home screen, see the user guide.
10
Navigation and Function Buttons
Description
Back
Return to the previous screen.
Home
Return to the Home screen.
Recent Apps
View and switch between
recently used apps.
Raise or lower the volume of the
speaker.
/1
Button
ea
se
,2
/7
Volume
Press right or left scan button to
trigger the scanner.
ra
ft,
Aux
ot
fo
rR
el
Scan
Use the Key Remap feature in
the Settings app to select a
button function.
To learn more about how to re-map a button, see the user guide.
11
Scan a Bar Code with the Scan Demo
Note:
For optimum performance, avoid reflections by scanning the bar
code at a slight angle.
Touch
> Demos > Scan Demo.
2.
Point the computer at the bar code.
3.
Touch Scan on the touch screen or press and hold a Scan
button. Center the aiming beam over the bar code.
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
/1
1.
The decode results appear on the screen.
Note:
In the Scan Demo app, not all bar code symbologies are enabled
by default. If a bar code does not scan, the correct symbology may
not be enabled. To learn how to modify the default app settings,
see the user guide.
12
Sync Data
To move files between your CN80 and a computer:
Connect the CN80 to your computer using a USB charge/
communication accessory.
2.
By default, the CN80 is in USB charging only mode. To
enable file transfers, swipe down from the top of the Home
screen to access the Notifications panel.
3.
Touch the USB notification, and then select either Transfer
files or Transfer photos (PTP).
4.
Depending on the Windows® operating system on your
computer, either open File Explorer or Windows Explorer.
5.
Under “Computer” or “This PC”, click on the CN80. You can
now copy, delete and/or move files or folders between the
computer and CN80 or a microSD card installed in the
CN80 as you would with any other storage drive (e.g., cut
and paste or drag and drop).
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
/1
1.
13
Restart the Mobile Computer
You may need to restart the mobile computer to correct
conditions where an application stops responding to the system
or the computer seems to be locked up.
1.
Press and hold the Power button until the options menu
appears.
2.
Select Reboot and then OK.
ra
ft,
ot
fo
rR
el
ea
To learn about advanced reset options, see the user guide.
Note:
se
,2
/7
/1
To restart the computer if the touch panel display is
unresponsive:
• Press and hold the Power button for approximately 8 seconds
until the computer restarts.
14
Support
To search our knowledge base for a solution or log into the
Technical Support Portal and report a problem, go to
www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to
www.honeywellaidc.com.
/1
Limited Warranty
se
,2
/7
For warranty information, go to www.honeywellaidc.com and
click Get Resources > Product Warranty.
ea
Patents
rR
el
For patent information, see www.hsmpats.com.
fo
Trademarks
ra
ft,
ot
Android is a trademark of Google LLC.
Windows is either a registered trademark or registered
trademark of Microsoft Corporation in the United States and/or
other countries.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make
changes in specifications and other information contained in
this document without prior notice, and the reader should in all
cases consult HII to determine whether any such changes have
been made. The information in this publication does not
represent a commitment on the part of HII.
15
D
ra
ft,
ot
fo
rR
el
ea
se
,2
/7
/1
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of
this material. HII disclaims all responsibility for the selection
and use of software and/or hardware to achieve intended
results.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated into
another language without the prior written consent of HII.
Copyright © 2018 Honeywell International Inc. All rights
reserved.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : Honeywell
Description                     : Dolphin CT60 Quick Start Guide
Title                           : Dolphin CT60 Quick Start Guide
Create Date                     : 2005:11:18 12:53:09Z
Creator Tool                    : FrameMaker 2017.0.3
Modify Date                     : 2018:02:07 20:51:50-05:00
Metadata Date                   : 2018:02:07 20:51:50-05:00
Producer                        : Acrobat Distiller 18.0 (Windows)
Document ID                     : uuid:d0b37a33-a89d-4b1b-9403-9fee21881dc9
Instance ID                     : uuid:b578815c-2198-4872-9d73-f6107d49debc
Page Mode                       : UseOutlines
Page Count                      : 16
Signing Date                    : 2018:02:07 20:51:50-05:00
Signing Authority               : ARE Acrobat Product v8.0 P23 0002337
Annotation Usage Rights         : Create, Delete, Modify, Copy, Import, Export
Author                          : Honeywell
Keywords                        : Dolphin CT60 Quick Start Guide, mobile computer, mobile phone, Android
Subject                         : Dolphin CT60 Quick Start Guide

EXIF Metadata provided by EXIF.tools