Honeywell CT50L0N DOLPHIN CT50 Mobile Computer (Terminal) User Manual CT50 ENUS HC indd

Download:
Mirror Download [FCC.gov]
Document ID	2683767
Application ID	5h/FArytjWsmTI+uwPQC3A==
Document Description	User Guide 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.93kB (411654 bits)
Date Submitted	2015-07-17 00:00:00
Date Available	2015-10-01 00:00:00
Creation Date	2015-06-18 10:18:56
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-06-18 16:56:50
Document Title	CT50-ENUS-HC.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	e840040

Hearing Aid Compatibility (HAC)
Device Listings
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
U.S.A.
www.honeywellaidc.com
Copyright © 2015
Honeywell International Inc. All rights reserved.
*CT50-ENUS-HC*
P/N CT50-ENUS-HC
The standard for compatibility of digital wireless devices with hearing aids is set forth in
American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains
these two sets of standards:

An “M” rating from M1 to M4 for reduced radio frequency (RF) interference to
enable acoustic coupling with hearing aids that do not operate in t-coil mode.
 A “T” rating from T1 to T4 to enable inductive coupling with hearing aids
operating in t-coil mode.
A digital wireless handset is considered hearing aid compatible for acoustic coupling if
it meets at least an “M3” rating under the ANSI standard. A digital wireless handset is
considered hearing aid compatible for inductive coupling if it meets at least a “T3” rating
under the ANSI standard.
Hearing Aid Compatibility (HAC)
Device Listings
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
U.S.A.
www.honeywellaidc.com
Copyright © 2015
Honeywell International Inc. All rights reserved.
*CT50-ENUS-HC*
The standard for compatibility of digital wireless devices with hearing aids is set forth in
American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains
these two sets of standards:

An “M” rating from M1 to M4 for reduced radio frequency (RF) interference to
enable acoustic coupling with hearing aids that do not operate in t-coil mode.
 A “T” rating from T1 to T4 to enable inductive coupling with hearing aids
operating in t-coil mode.
A digital wireless handset is considered hearing aid compatible for acoustic coupling if
it meets at least an “M3” rating under the ANSI standard. A digital wireless handset is
considered hearing aid compatible for inductive coupling if it meets at least a “T3” rating
under the ANSI standard.
P/N CT50-ENUS-HC
Hearing Aid Compatibility (HAC)
Device Listings
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
U.S.A.
www.honeywellaidc.com
Copyright © 2015
Honeywell International Inc. All rights reserved.
*CT50-ENUS-HC*
The standard for compatibility of digital wireless devices with hearing aids is set forth in
American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains
these two sets of standards:

An “M” rating from M1 to M4 for reduced radio frequency (RF) interference to
enable acoustic coupling with hearing aids that do not operate in t-coil mode.
 A “T” rating from T1 to T4 to enable inductive coupling with hearing aids
operating in t-coil mode.
A digital wireless handset is considered hearing aid compatible for acoustic coupling if
it meets at least an “M3” rating under the ANSI standard. A digital wireless handset is
considered hearing aid compatible for inductive coupling if it meets at least a “T3” rating
under the ANSI standard.
P/N CT50-ENUS-HC
Hearing Aid Compatibility (HAC)
Device Listings
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
U.S.A.
www.honeywellaidc.com
Copyright © 2015
Honeywell International Inc. All rights reserved.
*CT50-ENUS-HC*
P/N CT50-ENUS-HC
The standard for compatibility of digital wireless devices with hearing aids is set forth in
American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains
these two sets of standards:

An “M” rating from M1 to M4 for reduced radio frequency (RF) interference to
enable acoustic coupling with hearing aids that do not operate in t-coil mode.
 A “T” rating from T1 to T4 to enable inductive coupling with hearing aids
operating in t-coil mode.
A digital wireless handset is considered hearing aid compatible for acoustic coupling if
it meets at least an “M3” rating under the ANSI standard. A digital wireless handset is
considered hearing aid compatible for inductive coupling if it meets at least a “T3” rating
under the ANSI standard.
M-Ratings: Devices rated M3 or M4 meet FCC requirements and are likely to generate
less interference with hearing devices than devices that are not labeled. M4 is the
superior/higher of the two ratings.
T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s t-coil than unrated devices. T4 is the superior/higher of the
two ratings.
These ratings are not guaranteed. Results will vary depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated device successfully.
Trying out the device with your hearing device is the best way to evaluate it for your
personal needs.
When some wireless devices are used near some hearing devices such as hearing aids
and implants, users may detect a buzzing or humming noise. Some hearing devices are
more immune than others to this interference noise. Wireless devices may also vary in the
amount of interference they generate. The more immune the hearing aid device is, the less
likely one is to experience interference noise from the wireless device.
M-Ratings: Devices rated M3 or M4 meet FCC requirements and are likely to generate
less interference with hearing devices than devices that are not labeled. M4 is the
superior/higher of the two ratings.
T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s t-coil than unrated devices. T4 is the superior/higher of the
two ratings.
These ratings are not guaranteed. Results will vary depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated device successfully.
Trying out the device with your hearing device is the best way to evaluate it for your
personal needs.
When some wireless devices are used near some hearing devices such as hearing aids
and implants, users may detect a buzzing or humming noise. Some hearing devices are
more immune than others to this interference noise. Wireless devices may also vary in the
amount of interference they generate. The more immune the hearing aid device is, the less
likely one is to experience interference noise from the wireless device.
M-Ratings: Devices rated M3 or M4 meet FCC requirements and are likely to generate
less interference with hearing devices than devices that are not labeled. M4 is the
superior/higher of the two ratings.
T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s t-coil than unrated devices. T4 is the superior/higher of the
two ratings.
These ratings are not guaranteed. Results will vary depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated device successfully.
Trying out the device with your hearing device is the best way to evaluate it for your
personal needs.
When some wireless devices are used near some hearing devices such as hearing aids
and implants, users may detect a buzzing or humming noise. Some hearing devices are
more immune than others to this interference noise. Wireless devices may also vary in the
amount of interference they generate. The more immune the hearing aid device is, the less
likely one is to experience interference noise from the wireless device.
M-Ratings: Devices rated M3 or M4 meet FCC requirements and are likely to generate
less interference with hearing devices than devices that are not labeled. M4 is the
superior/higher of the two ratings.
T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s t-coil than unrated devices. T4 is the superior/higher of the
two ratings.
These ratings are not guaranteed. Results will vary depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated device successfully.
Trying out the device with your hearing device is the best way to evaluate it for your
personal needs.
When some wireless devices are used near some hearing devices such as hearing aids
and implants, users may detect a buzzing or humming noise. Some hearing devices are
more immune than others to this interference noise. Wireless devices may also vary in the
amount of interference they generate. The more immune the hearing aid device is, the less
likely one is to experience interference noise from the wireless device.
Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the
device can predict the usability of the two devices together:
 Any combined rating equal to or greater than six offers the best use.
 Any combined rating equal to five is considered normal use.
Note for models tested under 2007 C63.19 Version: These models have been tested
and rated for use with hearing aids for some of the wireless technologies that they use.
However, there may be some newer wireless technologies used in these devices that have
not been tested yet for use with hearing aids. It is important to try the different features
of these devices thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or
the manufacturer of the device for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your service provider or device
retailer.
The following devices are currently offered:
Model Name
HAC Rating
Air-Interface
C63.19Version
CT50LFN
M3 / T4
GSM, W-CDMA
2011
Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the
device can predict the usability of the two devices together:
 Any combined rating equal to or greater than six offers the best use.
 Any combined rating equal to five is considered normal use.
Note for models tested under 2007 C63.19 Version: These models have been tested
and rated for use with hearing aids for some of the wireless technologies that they use.
However, there may be some newer wireless technologies used in these devices that have
not been tested yet for use with hearing aids. It is important to try the different features
of these devices thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or
the manufacturer of the device for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your service provider or device
retailer.
The following devices are currently offered:
Model Name
HAC Rating
Air-Interface
C63.19Version
CT50LFN
M3 / T4
GSM, W-CDMA
2011
Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the
device can predict the usability of the two devices together:
 Any combined rating equal to or greater than six offers the best use.
 Any combined rating equal to five is considered normal use.
Note for models tested under 2007 C63.19 Version: These models have been tested
and rated for use with hearing aids for some of the wireless technologies that they use.
However, there may be some newer wireless technologies used in these devices that have
not been tested yet for use with hearing aids. It is important to try the different features
of these devices thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or
the manufacturer of the device for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your service provider or device
retailer.
The following devices are currently offered:
Model Name
HAC Rating
Air-Interface
C63.19Version
CT50LFN
M3 / T4
GSM, W-CDMA
2011
Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the
device can predict the usability of the two devices together:
 Any combined rating equal to or greater than six offers the best use.
 Any combined rating equal to five is considered normal use.
Note for models tested under 2007 C63.19 Version: These models have been tested
and rated for use with hearing aids for some of the wireless technologies that they use.
However, there may be some newer wireless technologies used in these devices that have
not been tested yet for use with hearing aids. It is important to try the different features
of these devices thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service provider or
the manufacturer of the device for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your service provider or device
retailer.
The following devices are currently offered:
Model Name
HAC Rating
Air-Interface
C63.19Version
CT50LFN
M3 / T4
GSM, W-CDMA
2011

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : e840040
Create Date                     : 2015:06:18 10:18:56-07:00
Modify Date                     : 2015:06:18 16:56:50-05:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:06:18 16:56:50-05:00
Format                          : application/pdf
Title                           : CT50-ENUS-HC.indd
Creator                         : e840040
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:c410646e-cfdf-4e7a-81ac-5c9f8fa6b40f
Instance ID                     : uuid:0fe4155a-d931-4347-9cf8-11d3a0725d00
Page Layout                     : OneColumn
Page Count                      : 2

EXIF Metadata provided by EXIF.tools