Honeywell Thermostat Cmr707A1049 Users Manual
CMR707A1049 to the manual 0d513f81-08d2-4224-9b51-375bea1aa439
2015-01-23
: Honeywell Honeywell-Honeywell-Thermostat-Cmr707A1049-Users-Manual-262109 honeywell-honeywell-thermostat-cmr707a1049-users-manual-262109 honeywell pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
1 2 3 4 5 6 7 OFFMANAUTO CMR707A1049 - User Guide CMR707 - USER GUIDE Description Features The Honeywell CMR707 is a programmable room thermostat designed to control your heating system efficiently, providing comfortable temperatures when you are at home and energy savings when you are away. The following instructions explain how to set up, program and operate your Honeywell CMR707 Programmable Room Thermostat. • Ergonomic user interface featuring an ‘OK-button’. • Large LCD (Liquid Crystal Display) Screen. • 7-day heating program to match your lifestyle, whilst maximising energy savings. • 4 independent temperature levels per day (from 5°C to 35°C). • Holiday button saves energy by letting you reduce the temperature for 1 to 99 days. • Built-in Memory holds the user program indefinitely. Controls Layout 1 17 2 15 4 5 6 7 1 16 3 2 3 4 5 DAY 6 CM707 7 8 OFFMANAUTO COPY DAY AUTO MAN 14 OFF PROGRAM 13 10 12 1 2 3 4 5 6 LCD Screen Battery Low Indicator Time Display Heating Required Indicator Day Indicator Temperature Display 9 1..4 11 7 8 9 10 11 12 Temperature Change Buttons Temperature Enquiry Button Operating Mode Buttons Green OK Button Battery Compartment Battery Cover 13 14 15 16 17 Holiday Function Button Program Buttons Copy Day Button Day Select Button Time Change Buttons ‘Getting Started’ SETTING-UP THE CMR707 This section shows you how to setup and run the thermostat in 3 simple steps: STEP 1: Installing the Batteries Note: if the ‘Low Battery’ Indicator is showing or the thermostat screen is blank (no symbols or digits are displayed) replace the batteries as follows, otherwise, please go directly to Step 2: Setting the Date and Time. To install the Batteries: a. Lift up the front cover of the thermostat to reveal the battery cover and product controls. b. Remove the battery cover by pressing down and sliding out. c. Insert the 2 x AA LR6 Alkaline Batteries supplied with the thermostat, ensuring the correct orientation (see ‘Controls Layout’ on page 2). d. After a short pause the thermostat will display information on the screen and is now ready for use. e. Replace the battery cover by sliding it firmly back into the front of the thermostat. PLEASE RESPECT YOUR ENVIRONMENT! Take care to dispose of used batteries carefully. STEP 2: Setting the Day and Time To set the Day and Time: a. Press the DAY button once and the ‘day indicator’ will begin to flash. b. Press the DAY button until the correct day is reached (Day 1 = Monday). Press the green button to confirm. d. Press either of the or buttons once to enter time setting mode. The LCD screen flashes the time digits (when the unit is powered for the first time the display shows 12:00). e. Use the or buttons to set the correct time then press the green button to confirm. Each press of the buttons will change the time by one minute and holding them down will change the time slowly at first and get progressively quicker. Note: If this mode is entered accidentally then press the AUTO, MAN or OFF buttons to exit. STEP 3: Running the Built-in Heating Program The thermostat is now ready for operation. Press the AUTO button and the built-in heating program will start running. Note: The built-in heating program has been designed to provide normal comfort requirements, but if you want to customise the settings please see the next section ‘Programming the CMR707’. ‘Efficient Daily Use’ PROGRAMMING THE CMR707 The Built-in Heating Program The built-in heating program has 4 temperature level changes per day that can be set between 3.00am and 2.50am the following day - allowing you to maintain the evening temperature after midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C increments. The factory default program for heating is as follows. Monday to Friday (Day 1 to 5) Period Time Temperature 1 6:30 21°C 2 8:00 18°C 3 18:00 21°C 4 22:30 16°C Saturday & Sunday (Day 6 & 7) Period Time Temperature 1 8:00 21°C 2 10:00 21°C 3 18:00 21°C 4 23:00 16°C ‘Efficient Daily Use’ PROGRAMMING THE CMR707 Reviewing the Heating Program To review or edit the heating program use the PROGRAM or buttons to navigate between the 4 individual programming periods for that day. Use the DAY button to step through each day of the week, so the complete 7 day heating program can be reviewed or edited. Modifying the Heating Program To change the heating program: a. Press either of the PROGRAM or buttons to enter the programming mode. The time / temperature settings for period 1 on Monday (Day 1) will be flashing as shown. The active period is highlighted by a flashing square around the numbers at the bottom of the screen and the selected day is shown with the day indicator. 1 2 3 4 5 6 7 1 2 3 4 b. To adjust the period start time use the or buttons, the ‘OK?’ indicator will be displayed to confirm the change. Holding the button down will change the time quickly. Note: If you are pressing the or buttons and the display flashes the next period, it means the next period will be pushed forward. c. Once the required time is reached press button to confirm. the green You now have a choice of how to set the program for the next day: f. i) Press the COPY DAY button to copy Monday’s program into Tuesday. The display will go blank apart from the ‘non flashing’ day indicator, which indicates the day copied and the ‘flashing’ target day to copy the program to. To accept this day press the green button. To select a different target day press the DAY button until the ‘flashing’ day indicator is under the required day, then accept it by pressing the green button. Note: Once the target day is confirmed it becomes the day that is copied if the COPY DAY button is pressed again. OR ii) Press the DAY button to move the day indicator to Tuesday (Day 2). The program for that day can then be adjusted by following steps b to e. Programs for the remaining days can be set in the same way, using the DAY button to move to the next day. To exit the programming mode select the desired operating mode by pressing the AUTO, MAN or OFF buttons. Note: To run the adjusted program select the AUTO mode. Disabling / Enabling Time Periods The thermostat has 4 periods each day that can be programmed, but you may not need all of these switch points for your heating requirements. Therefore, any period from 2 to 4 can be removed from (or returned to) the heating program profile. d. The temperature setting for period 1 on Monday (Day 1) will now be flashing. To or buttons and adjust this press the confirm the setting again by pressing the button. green To disable or enable time periods: a. To disable unwanted periods go to the desired period ( 2 to 4 ) using the PROGRAM or buttons to navigate, ensure the correct period is highlighted with the flashing square symbol. Press and button for at least 2 seconds hold the and the display will indicate the period has been removed from the program. e. The next time and temperature period will now be active. Adjust this by repeating steps b - d above until all 4 periods are set for Monday or press the AUTO button to run the program as set, at any time. b. To enable periods again follow the same procedure as above, navigating to the already disabled period. To enable this button period again press and hold the for at least 2 seconds. Note: If the original time setting did not require adjustment press the green button to move to step ‘d’. ‘Using the Features’ OPERATING THE CMR707 Choosing the Operating Mode Using the Special Functions The thermostat can operate in three different modes: Automatic, Manual or Off. To set the operating mode press either of the AUTO, MAN or OFF buttons. The screen indicates which mode is currently active by displaying AUTO, MAN or OFF. • HOLIDAY Function • AUTO (automatic) mode sets the thermostat to follow the built-in temperature program (default or personalised). Operating the thermostat in this mode is the best way to maintain a high level of temperature comfort whilst maximising your energy savings. • MAN (manual) mode sets the thermostat to act as a simple thermostat with a fixed setpoint throughout the day. The setpoint can be adjusted from 5°C to 35°C by using the or buttons. The thermostat will continue to maintain this temperature until another operating mode or temperature is selected. • OFF mode sets the thermostat to control to a minimum temperature setting of 5°C (default) that acts as a frost protection measure for your home. During Normal Operation • Temperature Enquiry In AUTO, MAN and OFF operating modes the thermostat will display the current room temperature. To review the programmed ‘target’ temperature (the temperature which the thermostat is trying button. This to maintain) press the ‘target’ temperature value will be displayed flashing for 5 seconds before returning to the current room temperature value. • Temperature Override The holiday function allows you to set a constant temperature (default = 10°C) for a specified number of days (from 1 - 99 days). This lets you save energy and related costs when you are away from home, but resumes normal operation on the day of your return. To set the Holiday function: a. Ensure the thermostat is running in AUTO or MAN operating modes. b. Press the holiday button to display the holiday days counter and temperature setting, along with the . holiday indicator c. Press the or time buttons to set the holiday time (1 - 99 days) and press the green button to confirm. d. Press the or buttons to set the holiday temperature (5°C - 35°C) and press the green button to confirm. The thermostat will now control to the new temperature for the set number of days that your home is vacant. At midnight the holiday counter will be reduced by one until the selected number of days have passed. The thermostat will then return to normal operation as set by the MAN or AUTO mode. To cancel the HOLIDAY function or to exit the function at any time press the button a second time. Adjusting the Time To adjust only the time during normal operation use the or buttons to adjust button again the time and press the green to confirm any changes. During normal operation (AUTO mode) the programmed temperature can be adjusted manually by pressing the or buttons button. The ‘target’ temperature or the will be displayed and flash for 5 seconds - during this time the or buttons can be used to modify the set value. Note: This temperature override is cancelled at the next programmed temperature change. TROUBLESHOOTING THE CMR707 Symptom Remedy Blank Display (Power Loss). Check batteries are installed by removing the battery cover. Check batteries have been installed in the correct orientation. Replace the batteries. Display shows flashing symbol. The batteries in the thermostat are low on power - Replace the batteries. Display shows A fault has occurred in your heating system. Remove and re-insert the batteries. symbol. If the symbol does not clear after a few minutes contact your installer. When setting my program the following is displayed --:-- --.- The time period has been disabled, to enable see ‘Disabling / Enabling Time Periods’ on page 4 The symbol is displayed but the boiler is not firing. This may be due to the internal controls of the boiler. FAQ’s How do I change the batteries on the thermostat when they run out? How do I set one temperature for the whole day? The thermostat constantly monitors the battery power level, which typically lasts for about 2 years before needing replaced. When the power is running low a flashing symbol will be displayed on the screen. To change the batteries follow the steps in the above section (‘STEP 1: Installing the Batteries’ on page 3), replacing the used batteries with new ones in Step c. Note: While changing the batteries your program settings will be stored but you may need to adjust the time settings to be correct. To operate as a simple thermostat with one temperature throughout the day, select the manual operating mode by pressing the MAN button. Adjust the temperature by pressing the or buttons - this can be set anywhere from 5°C to 35°C in 0.5°C steps. The thermostat will continue to maintain this temperature until another operating mode is selected or the temperature is adjusted. WHAT IS A PROGRAMMABLE ROOM THERMOSTAT? ...an explanation for householders A programmable room thermostat is both a programmer and a room thermostat. A programmer allows you to set ‘On’ and ‘Off’ time periods to suit your own lifestyle. A room thermostat works by sensing the air temperature, switching on the heating when the air temperature falls below the thermostat setting, and switching it off once this set temperature has been reached. So, a programmable room thermostat lets you choose what times you want the heating to be on, and what temperature it should reach while it is on. It will allow you to select different temperatures in your home at different times of the day (and days of the week) to meet your particular needs. Turning a programmable room thermostat to a higher setting will not make the room heat up any faster. How quickly the room heats up depends on the design of the heating system, for example, the size of boiler and radiators. Neither does the setting affect how quickly the room cools down. Turning a programmable room thermostat to a lower setting will result in the room being controlled at a lower temperature, and saves energy. The way to set and use your programmable room thermostat is to find the lowest temperature settings that you are comfortable with at the different times you have chosen, and then leave it alone to do its job. The best way to do this is to set low temperatures first, say 18°C, and then turn them up by one degree each day until you are comfortable with the temperatures. You won’t have to adjust the thermostat further. Any adjustments above these settings will waste energy and cost you more money. If your heating system is a boiler with radiators, there will usually be only one programmable room thermostat to control the whole house. But you can have different temperatures in individual rooms by installing thermostatic radiator valves (TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature that is reasonable for the whole house. If you do have TRVs, you can choose a slightly higher setting to make sure that even the coldest room is comfortable, then prevent any overheating in other rooms by adjusting the TRVs. The time on the programmer must be correct. Some types have to be adjusted in spring and autumn at the changes between Greenwich Mean Time and British Summer Time. You may be able to temporarily adjust the heating programme, for example, ‘Override’, ‘Advance’ or ‘Boost’. These are explained in the manufacturer’s instructions. Programmable room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtains or blocked by furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat from working properly. 42010941-008 R1 © 2006 Honeywell International Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2006:07:25 09:28:02+01:00 Modify Date : 2007:03:29 08:55:15+10:00 Metadata Date : 2007:03:29 08:55:15+10:00 Creator Tool : Adobe InDesign CS2 (4.0.3) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 5626 bytes, use -b option to extract) Document ID : adobe:docid:indd:a9f81d24-ce9d-11d9-96aa-f6d64a3031df Version ID : 1 Instance ID : uuid:a2e4b53c-062c-4630-8498-049268bcba8e Rendition Class : proof:pdf Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Has XFA : No Page Count : 8 Creator : Adobe InDesign CS2 (4.0.3)EXIF Metadata provided by EXIF.tools