Honeywell Thermostat Th6000 Users Manual 69 1921EFS 03 FocusPRO Series
TH6000 to the manual b854544b-b679-4759-aadd-bda8f0692606
2015-01-23
: Honeywell Honeywell-Honeywell-Thermostat-Th6000-Users-Manual-262274 honeywell-honeywell-thermostat-th6000-users-manual-262274 honeywell pdf
Open the PDF directly: View PDF .
Page Count: 80

Operating
Manual
FocusPRO® TH6000 Series
Programmable Thermostat
69-1921EFS-03

ENGLISH
Read and save these instructions.
® U.S. Registered Trademark. Patents pending.
Copyright © 2011 Honeywell International Inc. All rights reserved.
Quick Reference Card
Grasp and pull to see basic operating instructions at a glance.
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502
MCR29456
Battery Holder
Press down and pull to remove batteries.
Batteries should be replaced once a year (see page 17).
This manual covers the following models:
TH6110D : For 1 Heat/1 Cool systems
TH6220D: For up to 2 Heat/2 Cool systems
TH6320U: For up to 3 Heat/2 Cool systems
(Remove battery holder to find model number)

FocusPRO® TH6000 Series
1 69-1921EFS—03
ENGLISH
About your new thermostat
Thermostat features ...................................2
Programming at a glance ..........................3
Quick reference to controls ....................... 4
Quick reference to display ........................5
Programming & Operation
Set time and day ........................................6
Select fan setting (auto/on) ....................... 7
Select system setting (heat/cool)..............8
Using program schedules .........................9
Program schedule overrides ...................12
Auto-changeover (heat/cool) ...................14
Compressor protection ............................15
Adaptive Intelligent Recovery™ ..............16
Appendices
Battery replacement ................................17
In case of difficulty...................................18
Customer assistance ............................... 20
Accessories/replacement parts ..............20
5-year limited warranty ............................21
This thermostat is ready to go!
Your new thermostat is pre-programmed
and ready to go.
See page 3 to check settings.
Table of contents
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not operate
cooling system when outdoor
temperature is below 50°F (10°C).

Operating Manual
69-1921EFS—03 2
About your new thermostat
ENGLISH
About your new thermostat
Congratulations on the purchase of your new Honeywell thermostat. It has been
designed to give you many years of reliable service and easy-to-use, push-button
climate control.
Features
• Separatelyprogrammableweekday/weekendschedules.
• One-touchtempcontroloverridesprogramscheduleatanytime.
• Energy-savingsettingsformaximumcostsavings.
• Large,clear,backlitdisplayiseasytoread—eveninthedark.
• Displaysbothroomtemperatureandtemperaturesetting.
• Removablebatteryholderforfast,easyreplacement.
• Built-incompressorprotection.
2

FocusPRO® TH6000 Series
3 69-1921EFS—03
About your new thermostat
ENGLISH
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set
the time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) .........................See page 6
2. Select fan setting (Auto/On): Preset to Auto .................To change, see page 7
3. Select system setting (Heat/Cool): Preset to Heat ......To change, see page 8
4. Program schedules: Preset to energy-saving levels while you’re at work or
asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to
bed at 10 pm) ...............................................................To change, see pages 9-11
You can override the program schedule at any time, and manually adjust the temperature
(see pages 12-13).

Operating Manual
69-1921EFS—03 4
About your new thermostat
ENGLISH
M29457
Digital display (see page 5). Battery holder (see page 17).
Temperature Buttons
Press to adjust temperature
settings (see page 11-13).
Hold Button
Press to override
programmed temperature
control (see page 13).
Function Buttons
Press to select the function displayed just above each
button. (Functions change depending on the task.)
Quick reference to controls

FocusPRO® TH6000 Series
5 69-1921EFS—03
About your new thermostat
ENGLISH
Set Clock/Day/
Schedule
Auto
Wake Wed
Fan
In Recovery
System
Auxiliary
Heat On
Heat
Heat
Setting
Inside
AM
72
72
6:30
Replace Battery
MCR29458
Current inside temperature
In Recovery
(see page 16)
Current program period
Wake/Leave/Return/Sleep
(see pages 9-11)
Set Clock/Day/Schedule
(see pages 6 & 11)
Function buttons
Press the button beneath each function to
view or change settings (functions change
depending on the task)
Low battery warning
(see page 17)
Current time/day
(see page 6)
Temperature setting
(see pages 11-13)
Auxiliary heat
(Onlyforheatpumps
withauxiliaryheat)
System status
HeatOn/CoolOn(If
flashing, see page 15)
System setting
Heat/Cool/Auto/Off/Em
Heat (see page 8)
Fan setting
Auto/On(seepage7)
Quick reference to display screen

Operating Manual
69-1921EFS—03 6
About your new thermostat
ENGLISH
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
PM
4:30
Done
Set Day Set Schedule
Wed
MCR29459
1. Press the SET CLOCK/DAY/SCHEDULE
button, then press s or t to set
the clock time.
2. Press the SET DAY button, then
press s or t to select the day
of the week.
3. Press DONEtosave&exit.
Note: If the SET CLOCK/DAY/SCHEDULE
option is not displayed, press DONE or RUN
SCHEDULE.
Note: If the display flashes Set Clock,
the thermostat will follow your settings
for the weekday “Wake” time period until
you reset the time and day.
Set the time and day
Press SET CLOCK/DAY/SCHEDULE, then adjust time
Press SET DAY, then select current day

FocusPRO® TH6000 Series
7 69-1921EFS—03
About your new thermostat
ENGLISH
Press the FAN button to select Auto or On.
In “Auto” mode (the most commonly used
setting), the fan runs only when the heating
orcoolingsystemison.Ifsetto“On,”thefan
runs continuously.
Select the fan setting
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
On
FanSystem
Heat
MCR29460

Operating Manual
69-1921EFS—03 8
About your new thermostat
ENGLISH
Note: The Auto and EmHeat
system settings may not
appear, depending on how your
thermostat was installed.
Press the SYSTEM button to select:
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off: Heating and cooling systems are off.
• Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.
• Em Heat (only for heat pumps with
auxiliaryheat):Thermostatcontrols
EmergencyandAuxiliaryHeat.
Compressor is locked out.
Select the system setting
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
MCR29461

FocusPRO® TH6000 Series
9 69-1921EFS—03
About your new thermostat
ENGLISH
It’seasytoprogramyoursystemformaximumenergysavings.Youcanprogramfour
time periods each day, with different settings for weekdays and weekends.
Set to the time you awaken and the temperature you want during
the morning, until you leave for the day.
Set to the time you leave home and the temperature you want
while you are away (usually an energy-saving level).
Set to the time you return home and the temperature you want
during the evening, until bedtime.
Set to the time you go to bed and the temperature you want over-
night (usually an energy-saving level).
Save money by setting program schedules
WAKE
6:00 am
70 °
LEAVE
8:00 am
62 °
RETURN
6:00 pm
70 °
SLEEP
10:00 pm
62 °

Operating Manual
69-1921EFS—03 10
About your new thermostat
ENGLISH
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)
70 °75 °70 °75 °
62 °83 °62 °
[Orcancelperiod]
83 °
[Orcancelperiod]
70 °75 °70 °
[Orcancelperiod]
75 °
[Orcancelperiod]
62 °78 °62 °78 °
Energy-saving settings for maximum cost savings
This thermostat is pre-set with energy-saving program settings. We recommend these
settings,sincetheycanreduceyourheating/coolingexpensesbyasmuchas33%.
(Seenextpagetoadjusttimesandtemperaturesofeachtimeperiod.)

FocusPRO® TH6000 Series
11 69-1921EFS—03
About your new thermostat
ENGLISH
1. Press SET CLOCK/DAY/SCHEDULE, then SET
SCHEDULE.
2. Press s or t to set your weekday Wake
time (Mon–Fri), then press NEXT.
3. Press s or t to set the temperature for this
time period, then press NEXT.
4. Settimeandtemperatureforthenexttime
period(Leave).Repeatsteps2and3foreach
weekday time period.
5. Press NEXT to set weekend time periods (Sat-
Sun), then press DONEtosave&exit.
Note: Make sure the thermostat is set to the system you
want to program (Heat or Cool).
Note: You can press CANCEL PERIOD to eliminate unwanted
timeperiods(exceptWake).
To adjust program schedules
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
Done
Set DaySet Schedule
Mon Tue Wed Thu Fri
Done CancelPeriod
Leave
Set Schedule
Next
Heat
Setting
AM
62
8:00
MCR29462

Operating Manual
69-1921EFS—03 12
About your new thermostat
ENGLISH
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Temporary
MCR29463
Press s or t to immediately adjust
the temperature. This will temporarily
override the temperature setting for the
current time period.
The new temperature will be
maintainedonlyuntilthenext
programmed time period begins (see
page10).Forexample,ifyouwantto
turn up the heat early in the morning,
it will automatically be lowered later,
when you leave for the day.
To cancel the temporary setting at any
time, press RUN SCHEDULE.
Press to cancel temporary setting and
resume program schedule.
Note: Make sure the thermostat is set
to the system you want to control (heat,
cool or auto).
Press to temporarily adjust temperature.
Program schedule override (temporary)

FocusPRO® TH6000 Series
13 69-1921EFS—03
About your new thermostat
ENGLISH
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Hold
MCR29464
Press to cancel “Hold” setting and
resume program schedule.
Note: Make sure the thermostat is set
to the system you want to control (heat,
cool or auto).
Press to permanently adjust temperature. Press HOLD to permanently adjust
the temperature. This will override
the temperature settings for all time
periods.
The “Hold” feature turns off the
program schedule and allows you to
adjust the thermostat manually, as
needed.
Whatever temperature you set will
be maintained 24 hours a day, until
you manually change it, or press RUN
SCHEDULE to cancel “Hold” and resume
the programmed schedule.
Program schedule override (permanent)

Operating Manual
69-1921EFS—03 14
About your new thermostat
ENGLISH
Set Clock/Day/
Schedule
Auto
FanSystem
Auto
MCR29465
Auto Changeover is a feature used in cli-
mates where both air conditioning and heat-
ing are used on the same day. When the sys-
tem is set to Auto, the thermostat automati-
cally selects heating or cooling depending on
the indoor temperature.
Heat and cool settings must be at least 3
degrees apart. The thermostat will automati-
cally adjust settings to maintain this
3-degree separation (called “deadband”).
The 3-degree separation between heating
andcoolingsettemperaturesisfixed,and
cannot be changed.
Press until screen
displays “Auto”
Note: The Auto system setting
may not appear, depending on
how your thermostat was installed.
Auto changeover (heat/cool)

FocusPRO® TH6000 Series
15 69-1921EFS—03
About your new thermostat
ENGLISH
Set Clock/Day/
Schedule
Auto
FanSystem
Cool On
Cool
Cool
Setting
Inside
AM
75
75
6:30
MCR29466
This feature helps prevent damage to the
compressor in your air conditioning or heat
pump system.
Damagecanoccurifthecompressoris
restarted too soon after shutdown. This fea-
ture forces the compressor to wait for a few
minutes before restarting.
Duringthewaittime,thedisplaywillflash
the message CoolOn (or HeatOn if you have
a heat pump). When the safe wait time has
elapsed, the message stops flashing and the
compressor turns on.
Message flashes until safe restart
time has elapsed
Built-in compressor protection

Operating Manual
69-1921EFS—03 16
About your new thermostat
ENGLISH
Note: When Adaptive Intelligent Recovery is in effect, the thermostat will display “In
Recovery”.
Adaptive Intelligent RecoveryTM (AIR)
Adaptive Intelligent Recovery eliminates guesswork when setting your schedule.
It allows the thermostat to “learn” how long your furnace and air conditioner take
to reach the temperature you want.
Just set your program schedule to the time you want the house to reach your desired
temperature. The thermostat then turns on the heating or cooling at just the right time
to reach your scheduled temperature at your scheduled time.
Forexample:SettheWaketimeto6amandthetemperatureto70°.Theheatwill
come on before 6 am, so the temperature is 70° by the time you wake at 6.

FocusPRO® TH6000 Series
17 69-1921EFS—03
About your new thermostat
ENGLISH
Replace Battery
MCR29467
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed.
Install fresh batteries immediately when the
REPLACE BATTERY warning begins flashing. The
warning flashes about two months before the
batteries are depleted.
Evenifthewarningdoesnotappear,you
should replace batteries once a year, or
before leaving home for more than a month.
If batteries are inserted within two minutes,
the time and day will not have to be reset.
All other settings are permanently stored in
memory, and do not require battery power.
Press and pull to remove
Insert fresh AA alkaline
batteries, then reinstall
battery holder.
Battery replacement

Operating Manual
69-1921EFS—03 18
About your new thermostat
ENGLISH
In case of difficulty
If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is blank • Checkcircuitbreakerandresetifnecessary.
• Makesurepowerswitchatheating&coolingsystemison.
• Makesurefurnacedoorisclosedsecurely.
• Ifthermostatisbatterypowered,makesurefreshAAalkaline
batteries are correctly installed (see page 17).
Temperature
settings do not
change
Make sure heating and cooling temperatures are set to acceptable ranges:
• Heat:40°to90°F(4.5°to32°C).
• Cool:50°to99°F(10°to37°C).
To restore
default settings
Follow these steps to restore default settings (see page 10):
1. Press SET CLOCK/DAY/SCHEDULE.
2. Press SET SCHEDULE.
3. Press DONE and NEXT at the same time for 4 seconds.

FocusPRO® TH6000 Series
19 69-1921EFS—03
About your new thermostat
ENGLISH
In case of difficulty
Heating or
cooling system
does not respond
• PressSYSTEM button to set system to Heat. Make sure the temperature
is set higher than the Inside temperature.
• PressSYSTEM button to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
• Checkcircuitbreakerandresetifnecessary.
• Makesurepowerswitchatheating&coolingsystemison.
• Makesurefurnacedoorisclosedsecurely.
• Wait5minutesforthesystemtorespond.
“Cool On” or
“Heat On” is
flashing
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 15).

Operating Manual
69-1921EFS—03 20
About your new thermostat
ENGLISH
xxxxxxx xxxxxxx
MCR29468
For assistance with this product, please visit
http://yourhome.honeywell.com.
OrcallHoneywellCustomerCaretoll-freeat
1-800-468-1502.
To save time, please remove the battery holder
and note your model number and date code
before calling.
Accessories/replacement parts
To order, please call Honeywell Customer Care
toll-free at 1-800-468-1502.
Battery holder .................... Part No. 50007072-001
Cover plate assembly* ...... Part No. 50002883-001
*Use to cover marks left by old thermostats.
Model number Datecode
Customer assistance

FocusPRO® TH6000 Series
21 69-1921EFS—03
About your new thermostat
ENGLISH
5-year limited warranty
Honeywellwarrantsthisproduct,excludingbattery,tobefreefromdefectsinthe
workmanship or materials, under normal use and service, for a period of five (5) years
from the date of purchase by the consumer. If at any time during the warranty period
the product is determined to be defective or malfunctions, Honeywell shall repair or
replace it (at Honeywell’s option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from
which you purchased it; or
(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the
determination whether the product should be returned to the following address:
HoneywellReturnGoods,Dock4MN10-3860,1885DouglasDr.N.,GoldenValley,MN
55422, or whether a replacement product can be sent to you.

Operating Manual
69-1921EFS—03 22
About your new thermostat
ENGLISH
5-year limited warranty
This warranty does not cover removal or reinstallation costs. This warranty shall not
apply if it is shown by Honeywell that the defect or malfunction was caused by dam-
age which occurred while the product was in the possession of a consumer.
Honeywell’s sole responsibility shall be to repair or replace the product within the
termsstatedabove.HONEYWELLSHALLNOTBELIABLEFORANYLOSSOR
DAMAGEOFANYKIND,INCLUDINGANYINCIDENTALORCONSEQUENTIAL
DAMAGESRESULTING,DIRECTLYORINDIRECTLY,FROMANYBREACHOFANY
WARRANTY,EXPRESSORIMPLIED,ORANYOTHERFAILUREOFTHISPRODUCT.
Somestatesdonotallowtheexclusionorlimitationofincidentalorconsequential
damages, so this limitation may not apply to you.

FocusPRO® TH6000 Series
23 69-1921EFS—03
About your new thermostat
ENGLISH
5-year limited warranty
THISWARRANTYISTHEONLYEXPRESSWARRANTYHONEYWELLMAKESON
THISPRODUCT.THEDURATIONOFANYIMPLIEDWARRANTIES,INCLUDINGTHE
WARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE,
ISHEREBYLIMITEDTOTHEFIVE-YEARDURATIONOFTHISWARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. This warranty gives you specific legal rights,
and you may have other rights which vary from state to state.
If you have any questions concerning this warranty, please write Honeywell Customer
Relations,1985DouglasDr,GoldenValley,MN55422orcall1-800-468-1502.In
Canada,writeRetailProductsON15-02H,HoneywellLimited/HoneywellLimitée,35
DynamicDrive,Scarborough,OntarioM1V4Z9.

Honeywell International Inc.
1985DouglasDriveNorth
GoldenValley,MN55422
http://yourhome.honeywell.com
HoneywellLimited-HoneywellLimitée
35DynamicDrive
Toronto,OntarioM1V4Z9
® U.S. Registered Trademark.
© 2011 Honeywell International Inc.
69-1921EFS—03M.S.Rev.03-11
Printed in U.S.A.
Automation and Control Solutions

Manuel
d’utilisation
FocusPRO® Série TH6000
Thermostat programmable

Lire et conserver ces instructions.
®MarquedéposéeauxÉ.-U.Brevetseninstance.
©2011HoneywellInternationalInc.Tousdroitsréservés.
Carte de référence rapide
Tirez pour voir d’un coup d’œil les instructions de fonctionnement de base.
Besoin d’aide?
Pour obtenir de l’assistance au sujet de ce produit, consulter le http://yourhome.honeywell.com
outéléphonersansfraisauCentredeserviceàlaclientèledeHoneywellau1 800 468-1502
Porte-piles
Appuyez et tirez pour enlever les piles.
Lespilesdevraientêtreremplacéesunefoisparan(page17).
Ce guide couvre les modèles suivants :
TH6110D :Pour1systèmedechauffageet1systèmede
climatisation
TH6220D :Pour2systèmesdechauffageet2systèmes
de climatisation
TH6320U :Pour3systèmesdechauffageet2systèmes
de climatisation
(Enlevezleporte-pilespourtrouverlenumérodemodèle.)
MCR29456

FocusPRO® Série TH6000
À propos du thermostat
1 69-1921EFS—03
FRANÇAIS
À propos du thermostat
Caractéristiquesduthermostat ................2
Aperçu de la programmation ....................3
Consultation rapide des commandes .......4
Consultationrapidedel’écran .................. 5
Programmation et fonctionnement
Réglerl’heureetlejour .............................6
Sélectionnerleréglagedelasoufflante
(Auto/On) ....................................................7
Sélectionnerleréglagedusystème
(Heat/Cool) .................................................8
Utilisationdeshorairesprogrammés ........9
Supplantationdel’horaireprogrammé ... 12
Substitition automatique (Heat/Cool) .....14
Protection du compresseur .....................15
Récupérationintelligente
adaptativeMC ..............................................16
Annexes
Remplacement des piles ......................... 17
Encasdeproblème .................................18
Assistanceàlaclientèle .......................... 20
Accessoiresetpiècesderechange ........20
Garantielimitéede5ans ......................... 21
Ce thermostat est prêt
à fonctionner!
Votrenouveauthermostatestprogrammé
d’avanceetprêtàfonctionner.
Voirla page 3pourvérifierlesréglages.
Table des matières
MISE EN GARDE : RISQUE DE
DOMMAGES AU MATÉRIEL. Pourprévenir
des dommages potentiels au compresseur,
nepasfairefonctionnerlesystèmede
climatisationlorsquelatempérature
extérieureestinférieureà10°C(50°F).

Manuel d’utilisation
À propos du thermostat
69-1921EFS—03 2
FRANÇAIS
À propos du thermostat
Félicitationspourl’achatdevotrenouveauthermostatHoneywell.Ilaétéconçu
pourvousoffrirdenombreusesannéesdefonctionnementfiableetdecommandes
d’ambiancesimplesàbouton-poussoir.
Caractéristiques
• Horairesprogrammablesséparémentpourlesjoursdesemaineetles
week-ends.
• Commandedetempératureàunetouchepoursupplanterleprogramme
en tout temps.
• Réglagesd’économied’énergiepourdeséconomiesd’énergiemaximales.
• Grandécranincoloreetrétroéclairé,facileàliremêmedanslenoir.
• Afficheàlafoislatempératureambianteetlatempératureprogrammée.
• Porte-pilesamoviblepourleremplacementsimpleetrapidedespiles.
• Protectionducompresseurintégrée.
2

FocusPRO® Série TH6000
3 69-1921EFS—03
FRANÇAIS
Ce thermostat est prêt à fonctionner!
Votrenouveauthermostatestprogramméd’avanceetprêtàfonctionner.Ilvoussuffitderégler
lejouretl’heure.Puisdevérifierlesréglagesci-dessousetdelesmodifieraubesoin:
1. Régler l’heure et le jour (nécessaire pour le bon
fonctionnement) ................................................................................................. Voir page 6.
2. Sélectionner le réglage de la soufflante (Auto/On) :
PrérégléàAuto ......................................................................... Pour modifier, voir la page 7.
3. Sélectionner le réglage du système (Heat/Cool) :
PrérégléàChauffage ............................................................... Pour modifier, voir la page 8.
4. Utilisation des horaires programmés : Prérégléauxniveauxd’économied’énergielorsque
vousêtesabsentouaulit(supposantquevousvouslevezà6h,quevouspartezà8h,quevous
revenezà18hetquevousallezaulità22h). ................ Pour modifier, voir les pages 9-11.
COMMANDE DE TEMPÉRATURE À UNE TOUCHE :Vouspouvezsupplanterl’horaire
programméentouttempsetréglermanuellementlatempérature(pages12et13).

Manuel d’utilisation
69-1921EFS—03 4
FRANÇAIS
M29457
Affichage numérique (page 5). Porte-piles (page 17).
Boutons de température
Appuyezpourréglerla
température(page11-13).
Bouton de retenue
Appuyez pour supplanter
lacommandedetempérature
programmée(page13).
Boutons de fonctions
Appuyezpoursélectionnerlafonctionindiquéeau-dessus
dechaquebouton.(Lesfonctionschangentselonlatâche.)
Consultation rapide des commandes

FocusPRO® Série TH6000
5 69-1921EFS—03
FRANÇAIS
Set Clock/Day/
Schedule
Auto
Wake Wed
Fan
In Recovery
System
Auxiliary
Heat On
Heat
Heat
Setting
Inside
AM
72
72
6:30
Replace Battery
MCR29458
Température intérieure actuelle
En récupération
(page 16)
Durée du programme
actuel Réveil/Départ/
Retour/Sommeil
(pages 9-11)
Régler horloge/jour/
horaire (pages 6 et 11)
Boutons de fonctions
Appuyez sur le boutons en dessous de chaque
fonctionpourafficheroumodifierlesréglages
(lesfonctionschangentselonlatâche).
Avertissement de
piles faibles (page 17)
Heure/jour actuels
(page 6)
Réglage de
la température
(pages 11-13)
Chauffage auxiliaire
(Pour thermopompes
avecchauffageauxiliaire)
État du système
Chauffage en fonction/
climatisation en fonction
(si clignotant, voir page 15)
Réglage du système
Heat/Cool/Auto/Off/Em
Heat (page 8)
Réglage de soufflante
Auto/On(page7)
Consultation rapide de l’écran

Manuel d’utilisation
69-1921EFS—03 6
FRANÇAIS
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
PM
4:30
Done
Set Day Set Schedule
Wed
MCR29459
1. Appuyez sur les boutons SET CLOCK/
DAY/SCHEDULE puis appuyez sur s ou
t pourréglerl’heuredel’horloge.
2. Appuyez sur les boutons SET CLOCK/
DAY/SCHEDULE puis appuyez sur s ou
t pourréglerlejourdelasemaine.
3. Appuyez sur DONE pour enregistrer
lesréglagesetquitterlafonction.
Remarque : Si l’option SET CLOCK/DAY/
SCHEDULE ne s’affiche pas, appuyez sur
DONE ou RUN SCHEDULE.
Remarque : Si Set Clock clignote sur
l’affichage,lethermostatsuivravosréglages
pourl’heurederéveilensemainejusqu’àce
quel’heureetlejoursoientréinitialisés.
Régler le jour et l’heure
Appuyez sur SET CLOCK/DAY/SCHEDULEetréglezl’heure.
Appuyez sur SET DAY,puissélectionnezlejourprésent.

FocusPRO® Série TH6000
7 69-1921EFS—03
FRANÇAIS
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
On
FanSystem
Heat
MCR29460
Appuyez sur le bouton FANpoursélectionner
Auto ou On.
Enmode«Auto»(lemodeusuel),lasoufflante
fonctionneseulementquandlesystèmede
chauffage ou de climatisation est en marche.
Àlaposition«On»,lasoufflantefonctionne
sans interruption.
Sélectionnez le réglage de soufflante

Manuel d’utilisation
69-1921EFS—03 8
FRANÇAIS
Remarque :Lesréglagesde
systèmeAuto et EmHeat peuvent
nepass’afficher,selonlamanière
dontvotrethermostataétéinstallé.
Appuyez sur le bouton SYSTEMpoursélectionner:
• Heat : Lethermostatcommande
uniquementlesystèmedechauffage.
• Cool :Lethermostatcommande
uniquementlesystèmedeclimatisation.
• Off :Lessystèmesdechauffageet
de climatisation sont hors fonction.
• Auto :Lethermostatsélectionne
automatiquement le chauffage ou la
climatisation en fonction de la
températureintérieure.
• Em Heat (seulement pour les
thermopompesavecchauffageauxiliaire):
Lethermostatcommandelechauffage
d’urgenceouauxiliaire.Lecompresseur
n’estpasactivé.
Sélectionnez le réglage de système
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
MCR29461

FocusPRO® Série TH6000
9 69-1921EFS—03
FRANÇAIS
C’estfaciledeprogrammervotresystèmepourl’économied’énergiemaximum.Vouspouvez
programmerquatrepériodesdetempsàchaquejouravecdesréglagesdifférentspourles
jours de semaine et les week-ends.
Régleràl’heure du leveretàlatempératurevouluelematin,jusqu’à
votredépart.
Réglezàl’heuredudépartdelamaisonetàlatempératurevoulue
durantvotreabsence(enrèglegénérale,unniveaud’économie
d’énergie).
Réglezàl’heuredevotreretouràlamaisonetàlatempérature
quevousvoulezdurantlasoirée,jusqu’aucoucher.
Réglezàl’heure du coucheretàlatempératurevouluedurant
votresommeil(enrèglegénérale,unniveaud’économied’énergie).
Écomonisez de l’argent en programmant des horaires
LEVER
06:00
70 °
DÉPART
08:00
62 °
RETOUR
18:00
70 °
SOMMEIL
22:00
62 °

Manuel d’utilisation
69-1921EFS—03 10
FRANÇAIS
Climatisation (Lun.-ven.)Chauffage (Lun.-ven.) Chauffage (Sam.-dim.) Climatisation (Sam.-dim.)
70 °75 °70 °75 °
62 °83 °62 °
[Ouannulerlapériode]
83 °
[Ouannulerlapériode]
70 °75 °70 °
[Ouannulerlapériode]
75 °
[Ouannulerlapériode]
62 °78 °62 °78 °
Réglages d’économie d’énergie pour des économies d’énergie maximales
Cethermostatestpréréglésurunprogrammed’économied’énergie.Nousrecommandonsces
réglagespuisqu’ilspeuventréduirevosdépensesdechauffageetdeclimatisationjusqu’à33%.
(Voirlapagesuivantepourréglerl’heureetlatempératuredechaquepériode.)
Départ
(08:00)
Retour
(18:00)
Sommeil
(22:00)
Lever
(06:00)

FocusPRO® Série TH6000
11 69-1921EFS—03
FRANÇAIS
1. Appuyez sur SET CLOCK/DAY/SCHEDULE, puis SET
SCHEDULE.
2. Appuyez sur s ou t pourréglerl’heuredulever
en semaine Heure du lever (lun.–ven.), puis appuyez
sur NEXT.
3. Appuyez sur s ou t pourréglerlatempérature
pourcettepériode,puisappuyezsurNEXT.
4. Réglezl’heureetlatempératurepourlapériode
suivante(Départ).Répétezlesétapes2et3pour
chaquepériodedejour de semaine.
5. Appuyez sur NEXTpourréglerlespériodesdes
jours de week-end (sam.–dim.), puis appuyez sur
DONE pour enregistrer les changements et quitter
la fonction.
Remarque : S’assurerquelethermostatestréglésurlesystème
que vous souhaitez programmer (chauffage ou climatisation).
Remarque : VouspouvezappuyersurCANCEL PERIODpouréliminer
lespériodesnondésirées(sauflelever(Wake)).
Pour régler les horaires programmés
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
Done
Set DaySet Schedule
Mon Tue Wed Thu Fri
Done CancelPeriod
Leave
Set Schedule
Next
Heat
Setting
AM
62
8:00
MCR29462

Manuel d’utilisation
69-1921EFS—03 12
FRANÇAIS
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Temporary
MCR29463
Appuyez sur s ou t pourrégler
latempératureimmédiatement.Cela
supplantetemporairementleréglage
detempératuredelapériodeactuelle.
Lenouvelletempératuresera
maintenuejusqu’audébutdela
prochainepériodeprogrammée(page
10).Parexemple,
si vous voulez augmenter la
températuretôtlematin,ellesera
automatiquementréduiteplustard,
lorsquevoussortezpourlajournée.
Pourannulerunréglagetemporaireen
tout temps, appuyez sur RUN SCHEDULE.
Appuyezpourannulerleréglagetemporaire
etreprendrel’horaireprogrammé.
Remarque :S’assurerquelethermostatestréglé
surlesystèmequevoussouhaitezcommander
(chauffage, climatisation ou automatique).
Appuyezpourréglertemporairementlatempérature.
Supplantation de l’horaire programmé (temporaire)

FocusPRO® Série TH6000
13 69-1921EFS—03
FRANÇAIS
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Hold
MCR29464
Appuyezpourannulerleréglagepermanent
etreprendrel’horaireprogrammé.
Remarque :S’assurerquelethermostatestréglé
surlesystèmequevoussouhaitezcommander
(chauffage, climatisation ou automatique).
Appuyezpourréglerlatempératuredemanière
permanente. Appuyez sur HOLDpourréglerla
températuredefaçonpermanente.
Celasupplanteralesréglagesde
températurepourtouteslespériodes.
Lafonctionderetenue(Hold)interrompt
l’horaireprogramméetvouspermet
deréglerlethermostatmanuellement,
au besoin.
Latempératurechoisieestmaintenue
24heuresparjourjusqu’àcequevous
la modifiiez manuellement, ou que vous
appuyiez sur RUN SCHEDULE pour annuler
la retenue et reprendre l’horaire
programmé.
Supplantation de l’horaire programmé (permanente)

Manuel d’utilisation
69-1921EFS—03 14
FRANÇAIS
Set Clock/Day/
Schedule
Auto
FanSystem
Auto
MCR29465
Lasubstitutionautomatiqueestune
caractéristiqueutiliséedanslesclimats
où la climatisation et le chauffage sont
utiliséslemêmejour.Lorsquelesystème
estrégléàAuto,lethermostatsélectionne
automatiquement le chauffage ou la
climatisationselonlatempérature
intérieure.
L’écartentrelesréglagesdechauffage
etdeclimatisationdoitêtrede3degrés.
Lethermostatfaitautomatiquementles
réglagespourmaintenircetécartde
3degrés(appeléla«zonemorte»).
L’écartde3degrésentrelestempératures
dechauffageetdeclimatisationestfixeet
nepeutpasêtremodifié.
Appuyezjusqu’àceque
« Auto»s’afficheàl’écran.
Remarque : Leréglage
desystèmeAuto peut ne pas
s’afficher,selonlamanièredont
votrethermostataétéinstallé.
Substitution automatique (Heat/Cool)

FocusPRO® Série TH6000
15 69-1921EFS—03
FRANÇAIS
Set Clock/Day/
Schedule
Auto
FanSystem
Cool On
Cool
Cool
Setting
Inside
AM
75
75
6:30
MCR29466
Cettefonctionpermetdeprévenirles
dommagesaucompresseurdusystème
de climatisation ou de la thermopompe.
Desdommagespeuventsurvenirsion
redémarrelecompresseurtroprapidement
aprèsuneinterruption.Lafonctioncontraint
lecompresseuràattendrequelquesminutes
avantderedémarrer.
Durantl’attente,lemessageCoolOn ou
HeatOnclignoteraàl’écran(sivousavez
unethermopompe).Lorsqueletempsde
protectionseraécoulé,lemessagecessera
declignoteretlecompresseurdémarrera.
Lemessageclignotejusqu’à
cequevouspuissiezredémarrer
lesystèmeentoutesécurité.
Protection du compresseur intégrée

Manuel d’utilisation
69-1921EFS—03 16
FRANÇAIS
Remarque :Lorsquelarécupérationintelligenteadaptativeestenfonction,lethermostat
affiche«InRecovery».
Récupération intelligente adaptativeMC (AIR)
LaRécupérationintelligenteadaptativeéliminel’incertitudelorsquevousréglez
votrehoraire.Ellepermetauthermostat«d’apprendre»combiendetempsilfaut
àlafournaiseetauclimatiseurpouratteindrelatempératurevoulue.
Vousn’avezqu’àprogrammerl’horaireàl’heurequevousvoulezquevotredemeure
atteignelatempératuredésirée.Lethermostatmetalorslechauffageoulaclimatisation
enfonctionjusteàtempspouratteindrelatempératurevoulueàl’heureprévue.
Parexemple:Réglezl’heurederéveilà6:00etlatempératureà21°C(70°F).
Lechauffagedémarreraavant6:00afinquelatempératuresoità21°Clorsque
vousvouslèverezà6:00.

FocusPRO® Série TH6000
17 69-1921EFS—03
FRANÇAIS
Replace Battery
MCR29467
Lespilessontfacultatives(pourfournir
l’alimentation d’appoint) si votre thermostat est
câbléàl’installationpourêtrealimentéduCA.
Installerdespilesneuvesaussitôtquel’avertissement
REPLACE BATTERYsemetàclignoter.L’avertissement
commenceàclignoterenvirondeuxmoisavant
quelespilessoientcomplètementépuisées.
Mêmesil’avertissementn’apparaîtpas,ilfaut
remplacerlespilesunefoisparannée,ouavant
une absence de plus d’un mois.
Silespilessontinstalléesdanslesdeuxminutes,
l’heureetlejourn’aurontpasàêtreréinitialisés.
Touslesautresréglagessontintégrésdefaçon
permanenteàlamémoire,ilsnenécessitentpas
d’alimentation par les piles.
Saisir et tirer pour enlever
le thermostat
Installez des piles alcalines
AAneuvesetréinstallezle
porte-piles.
Remplacement des piles

Manuel d’utilisation
69-1921EFS—03 18
FRANÇAIS
En cas de problème
Silethermostatcausedesennuis,essayerl’unedecessuggestions.Laplupartdes
problèmespeuventêtreréglésrapidementetfacilement.
L’écran est vide • Vérifierledisjoncteuretréinitialisersinécessaire.
• S’assurerquel’interrupteurd’alimentationdusystèmedechauffage
et de climatisation est en marche.
• S’assurerquelaportedusystèmedechauffageestbienfermée.
• Silethermostatestalimentéparpiles,s’assurerquelespiles
alcalinesAAontétébieninstallées(page17).
Les réglages de
la température
ne changent pas
S’assurerqueleréglagedestempératuresdechauffageetdeclimatisation
est acceptable :
• Chauffage:4,5 °à32°C(40 °à90°F)
• Climatisation:10°à37°C(50°à99°F)
Rétablir les
réglages par
défaut
Suivezcesétapespourrétablirlesréglagespardéfaut(page10):
1. Appuyez sur SET CLOCK/DAY/SCHEDULE.
2. Appuyez sur SET SCHEDULE.
3. Appuyez sur DONE et NEXTsimultanémentpendant4secondes.

FocusPRO® Série TH6000
19 69-1921EFS—03
FRANÇAIS
En cas de problème
Le système de
chauffage ou de
climatisation ne
fonctionne pas
• AppuyersurlatoucheSYSTEMpourréglerlesystèmeàHeat. S’assurer
quelatempératurerégléeestsupérieureàlatempératureintérieure.
• AppuyersurlatoucheSYSTEMpourréglerlesystèmeàCool. S’assurer
quelatempératurerégléeestinférieureàlatempératureintérieure.
• Vérifierledisjoncteuretréinitialisersinécessaire.
• S’assurerquel’interrupteurd’alimentationdusystèmedechauffage
et de climatisation est en marche.
• S’assurerquelaportedusystèmedechauffageestbienfermée.
• Attendre5minutesquelesystèmesemetteenmarche.
Les mentions
« Cool On »
ou « Heat On »
clignotent
• Lafonctiondeprotectionducompresseurestactivée.Attendre
5minutesquelesystèmeredémarreentoutesécurité,
sans endommager le compresseur (page 15).

Manuel d’utilisation
69-1921EFS—03 20
FRANÇAIS
xxxxxxx xxxxxxx
MCR29468
Pour obtenir de l’aide avec ce produit, consulter
le http://yourhome.honeywell.com.
OutéléphonersansfraisauCentredeservice
àlaclientèledeHoneywellau1 800 468-1502.
Pour gagner du temps, enlever le porte-piles
etécrirelenumérodemodèleetlecodedateur
avant d’appeler.
Accessoires et pièces de rechange
Pourcommander,téléphonerauCentred’aide
au client de Honeywell au 1 800 468-1502.
Porte-piles ........................ N°depièce50007072-001
Assemblage de plaque
de couvercle* .................... N°depièce50002883-001
*Sertàcouvrirlesmarqueslaisséesparl’ancienthermostat.
Numérodemodèle Code dateur
Assistance à la clientèle

FocusPRO® Série TH6000
21 69-1921EFS—03
FRANÇAIS
Garantie limitée de 5 ans
Honeywellgarantitceproduit,àl’exceptiondespiles,contretoutdéfautdepièce
oudemain-d’oeuvre,durantunepériodedecinq(5)ansàpartirdeladated’achat
sileproduitestutiliséetentretenuconvenablement.Si,àn’importequelmoment
delapériodedegarantie,leproduitestdéfectueux,Honeywelllerépareraoule
remplacera(àsadiscrétion).
Encasdedéfectuositéduproduit,
(i)leretourner,aveclereçud’achatouuneautrepreuved’achatdatée,àl’endroit
oùilaétéacheté,ou
(ii)téléphonerauCentredeserviceàlaclientèledeHoneywellau1800468-1502.
LeCentredécideraalorss’ilfautretournerleproduitàl’adressesuivante:
HoneywellReturnGoods,Dock4MN10-3860,1885DouglasDr.N,GoldenValley,
MN 55422, ou s’il vous fera parvenir un produit de remplacement.

Manuel d’utilisation
69-1921EFS—03 22
FRANÇAIS
Garantie limitée de 5 ans
Cettegarantienecouvrepaslesfraisdedémontageoud’installation.Lagarantiesera
annuléesiHoneywellprouvequeladéfectuositéaétécauséepardesdommages
apparusalorsqueleclientétaitenpossessionduproduit.
Laresponsabilitéd’Honeywellselimiteàlaréparationouauremplacementdu
produitselonlestermesénoncés.HONEYWELLNEPEUTÊTRETENUERESPONSABLE
DEPERTEOUDOMMAGEDETOUTESSORTES,INCLUANTLESDOMMAGES
ACCIDENTELSOUCONSÉCUTIFSRÉSULTANT,DIRECTEMENTOUINDIRECTEMENT,
DETOUTMANQUEMENTÀN’IMPORTEQUELLEGARANTIE,EXPRESSEOUIMPLICITE,
OUDETOUTEAUTREDÉFAILLANCEDUPRODUIT.CertainsÉtatsouprovincesne
permettentpasl’exclusionoularestrictiondesdommagesaccidentelsouconsécutifs,
cette restriction pourrait donc ne pas s’appliquer.

FocusPRO® Série TH6000
23 69-1921EFS—03
FRANÇAIS
Garantie limitée de 5 ans
CETTEGARANTIEESTLASEULEGARANTIEEXPRESSEQUEHONEYWELLOFFRE
POURCEPRODUIT.LADURÉEDETOUTEGARANTIEIMPLICITE,INCLUANTLES
GARANTIESDEQUALITÉMARCHANDEOUD’ADAPTATIONÀUNEUTILISATION
PARTICULIÈRE,ESTLIMITÉEPARLESPRÉSENTESÀLAPÉRIODEDECINQANNÉES
DELAPRÉSENTEGARANTIE.
CertainsÉtatsouprovincesnepermettentaucunerestrictionsurladuréed’unegarantie
implicite,larestrictionci-dessuspourraitdoncnepass’appliquer.Laprésentegarantie
vousconfèredesdroitsjuridiquesspécifiques,etvouspourriezégalementjouird’autres
droitsselonvotreÉtatouprovince.
Pourtoutequestionausujetdelagarantie,écrireauBureauderelationsaveclesclients
deHoneywellàl’adressesuivante:1985DouglasDr.,GoldenValley,MN55422ou
téléphonerau1800468-1502.AuCanada,écrireàl’adresse:RetailProductsON15-02H,
HoneywellLimited/HoneywellLimitée,35,PromenadeDynamic,Toronto(Ontario)
M1V4Z9.

Honeywell International Inc.
1985DouglasDriveNorth
GoldenValley,MN55422
http://yourhome.honeywell.com
HoneywellLimited-HoneywellLimitée
35DynamicDrive
Toronto(Ontario)M1V4Z9
®MarquedéposéeauxÉ.-U.
© 2011 Honeywell International Inc.
69-1921EFS—03M.S.Rev.03-11
ImpriméauxÉtats-Unis
Solutions de régulation et d’automatisation

Manual de
funcionamiento
Serie FocusPRO® TH6000
Termostato programable

Lea y guarde estas instrucciones.
®MarcaregistradadelosEE.UU.Patentesentrámite.
© 2011, Honeywell International Inc. Todos los derechos reservados.
Tarjeta de referencia rápida
Sujetelatarjetaytiredeellaparaverrápidamentelasinstruccionesdefuncionamientobásicas.
¿Necesita asistencia?
Para obtener asistencia relacionada con este producto, visite http://yourhome.honeywell.com o
comuníquese con el número gratuito de Atención al cliente de Honeywell: 1-800-468-1502
MCR29456
Soporte de la batería
Presioneelsoporteytiredeélparaquitarlasbaterías.
Lasbateríasdebenserreemplazadasunavezalaño
(vealapágina17).
Este manual incluye los siguientes modelos:
TH6110D : Para sistemas de 1 calentador y 1 refrigerador
TH6220D: Para sistemas de 2 calentadores y 2 refrigeradores
TH6320U: Para sistemas de 3 calentadores y 2 refrigeradores
(Quite el soporte de la batería para ver el número de modelo)

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
1 69-1921EFS—03
ESPAÑOL
Acerca de su nuevo termostato
Características del termostato ..................2
Programaciónrápida .................................3
Rápidareferenciadeloscontroles ........... 4
Rápidareferenciadelapantalla ............... 5
Programación y funcionamiento
Configure la hora y el día ..........................6
Seleccione la configuración del ventilador
(“auto/on”[automático/encendido]) ......... 7
Seleccione la configuración del sistema
(“heat/cool”[calor/frío]) ............................. 8
Use los cronogramas del programa .........9
Programe la anulación del cronograma .12
Conversiónautomática(calor/frío) ..........14
Protección del compresor ....................... 15
Adaptive Intelli gent Recovery™ ..............16
Apéndice
Reemplazo de la batería ..........................17
Encasodeinconvenientes .....................18
Ayuda al cliente ........................................20
Accesorios y piezas de repuesto ............20
Garantíalimitadade5años .................... 21
¡Este termostato está listo
para funcionar!
Sunuevotermostatoestápreprogramado
ylistoparafuncionar.Vealapágina3 para revisar
las configuraciones.
Índice
PRECAUCIÓN: PELIGRO DE DAÑO
EN EL EQUIPO. Para evitar posibles
dañosenelcompresor,nohagaque
el termostato funcione cuando la
temperaturaexteriorseainferior
a 50 ºF (10 ºC).

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 2
ESPAÑOL
Acerca de su nuevo termostato
FelicitacionesporlacompradelnuevotermostatoHoneywell.Eltermostatohasido
diseñadoparabrindarlemuchosañosdefuncionamientoconfiableyparabrindarle
uncontrolclimáticofácildeusaryconsóloapretarunbotón.
Características
• Cronogramas separados: días de la semana y fines de semana.
• Elcontroldetemperaturaaltactoanularálaconfiguracióndelprograma
en cualquier momento.
• Configuracionesdeahorrodeenergíaparamáximoahorrodecostos.
• Pantallailuminadagrandeyfácildeleer,inclusoenlaoscuridad.
• Muestralatemperaturaambienteylaconfiguracióndelatemperatura.
• Soportedelabateríaextraíbleparaunreemplazorápidoyfácil.
• Proteccióndelcompresorincorporado.
2

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
3 69-1921EFS—03
ESPAÑOL
¡Este termostato está listo para funcionar!
Sunuevotermostatoestápreprogramadoylistoparafuncionar.Loúnicoquetiene
que hacer es configurar lahorayeldía.Luego,reviselasconfiguracionesdeabajo
ycámbielassiesnecesario:
1. Configure la hora y el día (necesario para un
funcionamiento adecuado) ...................................................... Vea la página 6
2. Seleccione la configuración del ventilador (“Auto/On”):
Predetermine la función “Auto” .......................... Para cambiar, vea la página 7
3. Seleccione la configuración del sistema (“Heat/Cool”):
Predetermine la función “Heat” .......................... Para cambiar, vea la página 8
4. Cronogramas del programa: Predetermine los niveles de ahorro de energía
paracuandoestéeneltrabajoodurmiendo(eltermostatoasumequeusted
se levanta a las 6 a. m., se va a las 8 a. m., regresa a las 6 p. m. y vuelve
a acostarse a las 10 p. m.) ...................... Para cambiar, vea las páginas 9 a 11
CONTROL DE TEMPERATURA AL TACTO:Ustedpodráanularlaconfiguracióndel
cronograma en cualquier momento y ajustar manualmente la temperatura
(vealaspáginas12y13).

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 4
ESPAÑOL
M29457
Pantalla digital(vealapágina5). Soporte de la batería
(vealapágina17).
Botones de la temperatura
Presiónelos para ajustar
las configuraciones
de temperatura (vea
laspáginas11a13).
Botón “Hold”
Presiónelo para anular el control
de temperatura programada
(vealapágina13).
Botones de funcionamiento
Presiónelos para elegir la función que se muestra
justo debajo de cada botón (las funciones cambian
según la tarea).
Rápida referencia de los controles

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
5 69-1921EFS—03
ESPAÑOL
Set Clock/Day/
Schedule
Auto
Wake Wed
Fan
In Recovery
System
Auxiliary
Heat On
Heat
Heat
Setting
Inside
AM
72
72
6:30
Replace Battery
MCR29458
Temperatura interior actual
Función “In Recovery”
(en recuperación);
vealapágina16
Período de
programación actual
“Wake/Leave/Return/Sleep”
(horas en que se despierta,
se va de su casa, regresa y se
duerme);vealaspáginas9a11
Ajuste “Clock/Day/Schedule”
(reloj/día/cronograma);
vealaspáginas6y11
Botones de funcionamiento
Presioneelbotóndetrásdecadafunción
para ver o cambiar las configuraciones
(las funciones cambian según la tarea)
Aviso de batería baja
(vealapágina17)
Hora y día actuales;
vealapágina6
Configuración
de temperatura;
vealaspáginas11a13
Función “Auxiliary heat”
(calor auxiliar);
solamente para bombas
decalorconcalorauxiliar
Estado del sistema
“HeatOn/CoolOn”(calor
encendido/frío encendido);
si hay destellos, vea la
página15
Configuración del sistema
“Heat/Cool/Auto/Off/
Em Heat”
(calor/frío/automático/
apagado/calentador de
emergencia);vealapágina8
Configuración del ventilador
“Auto/On”;vealapágina7
Rápida referencia de la pantalla

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 6
ESPAÑOL
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
PM
4:30
Done
Set Day Set Schedule
Wed
MCR29459
1. Presione el botón SET CLOCK/DAY/
SCHEDULE, luego, presione s o t
para configurar la hora del reloj.
2. Presione el botón SET DAY (configuración
del día), luego, presione s o tpara
configurar la hora del reloj.
3. Presione DONE (listo) para guardar y salir.
Nota: Si la opción SET CLOCK/DAY/
SCHEDULE no se muestra, presione
DONE o RUN SCHEDULE (funcionamiento
del cronograma).
Nota: Si la pantalla muestra destellos de
“Set Clock”,eltermostatoseguirá
sus configuraciones para los días de semana
del período de tiempo “Wake” hasta que
vuelva a configurar la hora y el día.
Configure la hora y el día
Presione SET CLOCK/DAY/SCHEDULE, luego, ajuste la hora
Presione “SET DAY”, luego, selecione el día actual

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
7 69-1921EFS—03
ESPAÑOL
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
On
FanSystem
Heat
MCR29460
Presione el botón “FAN” para seleccionar
“Auto” u “On”.
Enelmodo“Auto”(laconfiguraciónusada
comúnmente) el ventilador funciona solamente
cuando la calefacción o el sistema de
enfriamientoestánencendidos.Sisefijaen
“On”,elventiladorfuncionasininterrupción.
Seleccione la configuración del ventilador

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 8
ESPAÑOL
Nota:Quizáslasconfiguraciones
del sistema “Auto” y “EmHeat” no
aparezcan, según cómo haya sido
instalado el termostato.
Presione el botón “SYSTEM” para elegir:
• “Heat”: Eltermostatocontrolasolamente
el sistema de calefacción.
• “Cool”:Eltermostatocontrolasolamente
el sistema de enfriamiento.
• “Off”:Lossistemasdecalefacción
yenfriamientoestánapagados.
• “Auto”:Eltermostatoeligeautomáticamente
cuándocalentaroenfriar,dependiendo
de la temperatura interior.
• “Em Heat” (solamente para bombas
deemergenciaconcalorauxiliar):
Eltermostatocontrolaelcalorde
emergenciayauxiliar.Elcompresor
estábloqueado.
Seleccione la configuración del sistema
Set Clock/Day/
Schedule
Auto
FanSystem
Heat
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
MCR29461

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
9 69-1921EFS—03
ESPAÑOL
Esfácilprogramarsusistemaquepermiteunahorromáximodeenergía.Ustedpuedeprogramar
cuatro períodos de tiempo por día, con diferentes configuraciones para los días de semana y los
fines de semana.
Programe la hora en que se despierta y la temperatura que quiere
durantelamañana,hastaqueustedsevadesucasa.
Programe la hora en que usted se va de su casa y la temperatura que
quieremientrasnoestéensucasa(porlogeneral,unniveldeahorro
de energía).
Programe la hora en que regresa a su casa y la temperatura que quiere
durante la tarde hasta que se va a dormir.
Programe la hora en que usted se va a dormir y la temperatura que quiere
durante toda la noche (por lo general, un nivel de ahorro de energía).
Ahorre dinero configurando los cronogramas del programa
“WAKE”
6:00 a. m.
70 °
“LEAVE”
8:00 a. m.
62 °
“RETURN”
6:00 p. m.
70 °
“SLEEP”
10:00 p. m.
62 °

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 10
ESPAÑOL
“Wake”
(6:00 a. m.)
“Leave”
(8:00 a. m.)
“Return”
(6:00 p. m.)
“Sleep”
(10:00 p. m.)
“Cool”
(de lunes a viernes)
“Heat”
(de lunes a viernes) “Heat”
(sábadoydomingo) “Cool”
(sábadoydomingo)
70 °75 °70 °75 °
62 °83 °62 °
[Ocanceleelperíodo]
83 °
[Ocanceleelperíodo]
70 °75 °70 °
[Ocanceleelperíodo]
75 °
[Ocanceleelperíodo]
62 °78 °62 °78 °
Configuraciones de ahorro de energía para máximo ahorro de costos
Estetermostatovienepredeterminadoconconfiguracionesparaunprogramade
ahorro de energía. Recomendamos estas configuraciones debido a que reducen los
gastosdecalefacciónyenfriamientohastaenun33%.(Vealasiguientepáginapara
ajustar las horas y las temperaturas de cada período de tiempo).

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
11 69-1921EFS—03
ESPAÑOL
1. Presione “SET CLOCK/DAY/SCHEDULE”, luego, “SET
SCHEDULE”.
2. Presione s o t para configurar la hora en que se
despierta los días de semana (de lunes a viernes),
luego presione “NEXT”.
3. Presione s o t para configurar la temperatura para
este período de tiempo, luego, presione “NEXT”.
4.Configurelahoraylatemperaturaparaelpróximo
períododetiempo(“Leave”).Repitalospasos2y3
para cada día de la semana.
5. Presione “NEXT” para configurar los días de fin
de semana(sábadoydomingo),luego,presione
“DONE” para guardar y salir.
Nota:Asegúresedequeeltermostatoestéconfigurado
con el sistema que quiere programar (calor o frío).
Nota: Puede presionar “CANCEL PERIOD” (cancelar período)
paraeliminarlosperíodosnodeseados(excepto“Wake”).
Para ajustar los cronogramas del programa
Set Clock/Day/
Schedule
Auto
FanSystem
Cool
Done
Set DaySet Schedule
Mon Tue Wed Thu Fri
Done CancelPeriod
Leave
Set Schedule
Next
Heat
Setting
AM
62
8:00
MCR29462

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 12
ESPAÑOL
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Temporary
MCR29463
Presione s o t para ajustar
la temperatura en forma inmediata.
Estoanularátemporariamentela
configuración de la temperatura para
el período de tiempo actual.
Lanuevatemperaturasemantendrá
solamente hasta que comience el
próximoperíodoprogramado(vea
lapágina10).Porejemplo,siquiere
aumentarelcaloralamañanatemprano,
disminuiráautomáticamentemástarde,
cuando usted se vaya de su casa.
Para cancelar la configuración
en cualquier momento, presione
“RUN SCHEDULE”.
Presione para anular la configuración temporaria y
volver al cronograma del programa.
Nota: Asegúrese de que el termostato
estéconfiguradoconelsistemaquequiereusted
controlar(calor,fríooautomático).
Presione para ajustar temporariamente la temperatura.
Programe la anulación del cronograma (temporario)

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
13 69-1921EFS—03
ESPAÑOL
Run Schedule
Auto
FanSystem
Heat
Heat
Setting
Inside
AM
69
75
6:30
Hold
MCR29464
Presione para anular la configuración “Hold”
y volver al cronograma del programa.
Nota:Asegúresedequeeltermostatoesté
configurado con el sistema que usted quiere
controlar(calor,fríooautomático).
Presione “HOLD” para ajustar
permanentemente la temperatura.
Estoanularálasconfiguraciones
de la temperatura para todos los
períodos de tiempo.
Lafunción“Hold”apagaelcronograma
del programa y le permite ajustar el
termostato manualmente, según sea
necesario.
Cualquiera que sea la temperatura que
configure,éstasemantendrálas24horas
del día, hasta que la cambie manualmente
o presione “RUN SCHEDULE” para anular
“Hold” y retomar el cronograma.
Programe la anulación del cronograma (permanente)
Presione para ajustar temporariamente la temperatura.

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 14
ESPAÑOL
Set Clock/Day/
Schedule
Auto
FanSystem
Auto
MCR29465
Laconversiónautomáticaesunafunciónque
hace funcionar el acondicionador de aire y la
calefacción en el mismo día. Cuando el sistema
estáconfiguradoen“Auto”,eltermostatoelige
automáticamentecuándocalentaroenfriar,
dependiendo de la temperatura interior.
Lasconfiguracionesdecaloryfríodeben
tener3gradosdediferencia.Eltermostato
ajustaráautomáticamentelasconfiguraciones
para mantener esta separación de 3 grados
(denominada banda muerta).
Ladiferenciade3gradosentrelastemperaturas
de calor y frío es fija y no puede ser cambiada.
Presione hasta
que la pantalla
muestre “Auto”
Nota: Quizáslaconfiguración“Auto”
del sistema no aparezca, según cómo
haya sido instalado
el termostato.
Conversión automática (calor/frío)

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
15 69-1921EFS—03
ESPAÑOL
Set Clock/Day/
Schedule
Auto
FanSystem
Cool On
Cool
Cool
Setting
Inside
AM
75
75
6:30
MCR29466
Estafunciónayudaaprevenireldañodel
compresor en su acondicionador de aire
o en su sistema de bomba de calor.
Elcompresorpuededañarsesisevuelve
ainiciarinmediatamentedespuésdeser
apagado.Estacaracterísticahacequeel
compresor demore unos minutos antes
de volver a iniciarse.
Duranteeltiempodeespera,elindicador
mostraráelmensaje“CoolOn” (o “HeatOn”
si tiene una bomba de calor). Cuando haya
transcurrido el tiempo de espera de seguridad,
elmensajedejarádetitilaryseencenderáel
compresor.
Elmensajetitilahastaquehaya
transcurrido el tiempo de reinicio
de seguridad
Protección del compresor incorporado

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 16
ESPAÑOL
Nota: Cuando la función “Adaptive Intelligent Recovery” (recuperación inteligente de
adaptación)estéactivada,eltermostatomostraráenlapantallalafrase“InRecovery”.
Adaptive Intelligent Recovery™ (AIR)
LafunciónAdaptiveIntelligentRecoveryeliminalanecesidaddeconjeturascuando
seconfigureuncronograma.Permitequeeltermostato“sepa”cuántodemorasu
sistemadecalefaccióneléctricoparaalcanzarlatemperaturadeseada.
Sólo configure el cronograma del programa con la hora que desee que la casa
alcancelatemperaturadeseada.Eltermostato,luego,encenderálacalefacción
o el sistema de enfriamiento en el momento indicado para alcanzar esa temperatura
y la hora programada por usted.
Por ejemplo, configure la hora para despertarse a las 6 a. m. y con una temperatura
de70º.Elcalorvolveráantes delas6a.m.,paraquelatemperaturaestéa70ºpara
cuando se levante a las 6.

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
17 69-1921EFS—03
ESPAÑOL
Replace Battery
MCR29467
Lasbateríassonopcionales(paraofrecerenergía
de respaldo) si su termostato fue conectado para
energía de CA cuando fue instalado.
Instale las baterías nuevas inmediatamente cuando
la advertencia “REPLACE BATTERY” (reemplazo de
baterías)comienceatitilar.Laadvertenciatitilará
durante alrededor de dos meses antes de que se
consuman las baterías.
Aunquelaadvertencianoaparezca,deberá
reemplazarlasbateríasunavezporañooantes
deabandonarelhogarpormásdeunmes.
Si las baterías se colocan antes de que transcurran
dosminuntos,eltiempoyeldíanodeberánser
configurados nuevamente. Todos los ajustes se
almacenan de manera permanente en la memoria
y no requieren energía de la batería.
Presione y tire para quitar
Inserte dos baterías nuevas
AA alcalinas, luego, vuelva
a instalar el soporte de la
batería.
Reemplazo de la batería

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 18
ESPAÑOL
En caso de inconvenientes
Si tiene dificultades con el termostato, intente seguir las sugerencias que se indican
acontinuación.Lamayoríadelosproblemaspuedencorregirserápidayfácilmente.
La pantalla
está vacía
• Controle el interruptor de circuito y, si es necesario, reinícielo.
• Asegúrese de que el interruptor de energía del sistema de calefacción
yenfriamientoestéencendido.
• Asegúresedequelapuertadelsistemadecalefacciónestébiencerrada.
• Si el termostato funciona con baterías, asegúrese de que las nuevas
bateríasAAalcalinasesténinstaladascorrectamente(vealapágina17).
Las configuraciones
de la temperatura
no cambian
Asegúresedequelastemperaturasdecaloryfríoesténconfiguradas
en rangos aceptables:
• Calor:De40°Fa90°F(de4.5°Ca32°C).
• Frío:De50°Fa99°F(de10°Ca37°C).
Para recuperar
las configuraciones
predeterminadas
Siga estos pasos para recuperar las configuraciones predeterminadas
(vealapágina10):
1. Presione “SET CLOCK/DAY/SCHEDULE”.
2. Presione “SET CLOCK/DAY/SCHEDULE”.
3. Presione “DONE” y “NEXT” al mismo tiempo durante 4 segundos.

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
19 69-1921EFS—03
ESPAÑOL
En caso de inconvenientes
El sistema
de calefacción
o enfriamiento
no responde
• Presioneelbotón “SYSTEM” para configurar el sistema en “Heat”. Asegúrese
dequelatemperaturaseamásaltaquelatemperaturainterna.
• Presioneelbotón “SYSTEM” para configurar el sistema en “Cool”. Asegúrese
dequelatemperaturaseamásbajaquelatemperaturainterna.
• Controleelinterruptordecircuitoy,siesnecesario,reinícielo.
• Asegúresedequeelinterruptordeenergíadelsistemadecalefacción
yenfriamientoestéencendido.
• Asegúresedequelapuertadelsistemadecalefacciónestébiencerrada.
• Espere5minutosparaquerespondaelsistema.
El mensaje
“Cool On” o
“Heat On” titila
• Lafuncióndelaproteccióndelcompresorestáfuncionando.Espere
5 minutos para que el sistema se vuelva a iniciar de forma segura,
sindañarelcompresor(vealapágina15).

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 20
ESPAÑOL
xxxxxxx xxxxxxx
MCR29468
Para obtener asistencia relacionada con este producto, visite
http://yourhome.honeywell.com.
Para hacer el pedido, comuníquese con el número gratuito
de Atención al cliente de Honeywell 1-800-468-1502.
Para ahorrar tiempo, anote el número de modelo
y el código de fecha antes de llamar.
Accesorios y piezas de repuesto
Para hacer el pedido, comuníquese con el número gratuito
de Atención al cliente de Honeywell 1-800-468-1502.
Soporte de la batería ............N.º de pieza 50007072-001
Ensamblajedelaplaca
de cubierta* ...........................N.º de pieza 50002883-001
*Úselo para cubrir las marcas que dejan los
termostatos viejos.
Número de modelo Código de la fecha
Ayuda al cliente

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
21 69-1921EFS—03
ESPAÑOL
Garantía limitada de 5 años
Honeywellgarantizaesteproducto,aexcepcióndelabatería,poreltérminode
cinco(5)añoscontracualquierdefectodefabricaciónodelosmateriales,apartir
de la fecha de compra por parte del consumidor, en condiciones normales de uso
y servicio. Si en cualquier momento durante el período de garantía se verifica que
elproductotieneundefectooquefuncionamal,Honeywelllorepararáoreemplazará
(a elección de Honeywell).
Si el producto tiene defectos,
(i)devuélvalo,conlafacturadeventauotrapruebadecomprafechada,allugar
donde lo compró; o
(ii) comuníquese con el Centro de atención al cliente de Honeywell al 1-800-468-1502.
Atenciónalclientedecidirásisedebedevolverelproductoalasiguientedirección:
DevolucióndemercaderíasdeHoneywell,Dock4MN10-3860,1885DouglasDr.N.,
GoldenValley,MN55422,osiselepuedeenviarunproductoenreemplazo.

Manual de funcionamiento
Acerca de su nuevo termostato
69-1921EFS—03 22
ESPAÑOL
Garantía limitada de 5 años
Estagarantíanocubreloscostosdeextracciónoreinstalación.Estagarantíano
seaplicarásiHoneywelldemuestraqueeldefectoomalfuncionamientoestaba
causadopordañosocurridosmientraselproductoestabaenposesióndeun
consumidor.
LaúnicaresponsabilidaddeHoneywellserárepararoreemplazarelproducto
dentrodelosplazosestablecidosanteriormente.HONEYWELLNORESPONDERÁ
PORLAPÉRDIDAODAÑODENINGÚNTIPO,INCLUIDOELDAÑOINCIDENTAL
OINDIRECTODERIVADO,DIRECTAOINDIRECTAMENTE,DELINCUMPLIMIENTO
DELASGARANTÍAS,EXPRESASOIMPLÍCITAS,ODEOTRASFALLASDEESTE
PRODUCTO.Algunosestadosnopermitenlaexclusiónolimitacióndeldañoincidental
o indirecto, entonces esta limitación puede no resultar aplicable a su caso.

Serie FocusPRO® TH6000
Acerca de su nuevo termostato
23 69-1921EFS—03
ESPAÑOL
Garantía limitada de 5 años
LAPRESENTEGARANTÍAESLAÚNICAGARANTÍAEXPRESAQUEHONEYWELL
PROPORCIONARESPECTODEESTEPRODUCTO.LADURACIÓNDELASGARANTÍAS
IMPLÍCITAS,INCLUIDASLASGARANTÍASDECOMERCIABILIDADYAPTITUDPARA
UNOBJETIVOPARTICULAR,ESTÁLIMITADAALADURACIÓNDECINCOAÑOSDE
LAPRESENTEGARANTÍA.
Algunos estados no permiten las limitaciones sobre la duración del período de una
garantía implícita, entonces la limitación anterior puede no resultar aplicable a su caso.
Estagarantíalebrindaderechoslegalesespecíficos,yustedpodrátenerotrosderechos
que varían según el estado.
Si tiene preguntas sobre la presente garantía, sírvase escribir a Honeywell Customer
Relations,1985DouglasDr,GoldenValley,MN55422ollamaral1-800-468-1502.
EnCanadá,escribaaRetailProductsON15-02H,HoneywellLimited/HoneywellLimitée,
35DynamicDrive,Toronto,OntarioM1V4Z9.

Honeywell International Inc.
1985DouglasDriveNorth
GoldenValley,MN55422
http://yourhome.honeywell.com
HoneywellLimited-HoneywellLimitée
35DynamicDrive
Toronto,OntarioM1V4Z9
®MarcaregistradadelosEE.UU.
© 2011 Honeywell International Inc.
69-1921EFS—03M.S.Rev.03-11
ImpresoenEE.UU.
Automatización y control desenlace