Honeywell Switches Users Manual 230642 Switch Catalog
Switches to the manual 810704c8-d3c6-43dc-a2c9-8c57ca6ad29c
2015-01-23
: Honeywell Honeywell-Switches-Users-Manual-261949 honeywell-switches-users-manual-261949 honeywell pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Sensing and Control SWITCH APPLICATIONS The odds are that Honeywell Sensing and Control can meet your switch demands. Designers of heavy-duty equipment have trusted Honeywell pressure and vacuum switches for many years in applications that are constantly subjected to harsh environments…from chemical splashes, salt water, high pressure spikes…we’ve got you covered. Our standard line is quite extensive, but if it is not exactly what your requirements call for we can modify an existing part or create an original just for you. Honeywell has produced millions of custom-built switches for automotive, pool and spa, powershift transmissions, anti-skid braking systems, excavator hydraulic systems, water pump systems, and dental air compressors, to name just a few. Our highly skilled model shop, certified lab and engineering staff can work with you through the design phase, prototype stage, all the way through to the testing phase. And if time is a crucial factor, rapid prototyping technology can now allow us to provide you with a sample in days. WARNING! Suitability of application is responsibility of user. Extreme heat and vibration should be avoided at mounting points such as on top of an engine over a hot manifold. (MAX operation temp 250° F). Always install by using a wrench on the hex base. Torquing at any other part of the switch voids the warranty or may cause malfunction. A Polyimide film diaphragm is utilized in the pressure switch and is not recommended for use with water. However, a Teflon diaphragm is available for water applications. Compatibility with the brass or steel external pressure switch material is the responsibility of the user. For maximum operating pressures see appropriate switch family specifications. Contact Honeywell Engineering whenever use of switch or fluid compatibility is questioned. ! CONTENTS • Ultra Duty Pressure Switches 10-400 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.3 • Extended Duty Pressure Switches 0.5-150 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.4 • Extended Duty Vacuum Switches1.1-22” Hg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.6 • Extended Duty Piston Switches 200-1000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p.7 • Factory Set Variable Differential Pressure & Vacuum Switches 2-70 psi & 2-22” Hg . . . p.8 • High Pressure Environmentally Sealed Extreme-Duty Switches 35-3000 psi . . . . . . . . . p.9 WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. 2 Set Points from 10-400 psi 5000 Series Ultra Duty Pressure Switch Honeywell Sensing and Control has designed a high pressure/low set point pressure switch for applications that see sudden pressure spikes and high system pressures that can result in early switch failures. This series has been strengthened to prevent cracking of the base with plated steel and screw machined components in a 3-piece design. Modifications to the effective area of the pressure cavity and size of the diaphragm button and diaphragm o-ring are what makes the switch capable of handling sudden pressure transients and high system pressures that are common in applications such as braking, transmission and hydraulic systems. 2.3” REF. The switch’s physical appearance is similar to our 5000 Series switches with a height of only 2.3” (approx) and a diameter of 1.47”. In comparison to our 5000 Series Switch the burst rating has significantly increased from 1250 psi to over 4000 psi on the new design. Specifications Type: Direct action blade contact Contacts: Silver alloy, gold plated Set Point Range: 10-400 PSI Operating Pressure: 500 PSI Proof Pressure: 2000 PSI Burst Pressure: 4000 PSI Base: Plated Steel — Screw Machined 3-piece construction Diaphragm: Polymide Film Connector: 1/8-27 NPT Male Thread Temperature Range: -40°F to +250°F Terminals: #8-32 screws, 1/4” blade, 280 Series Metripack Circuitry: SPST-N.O., N.C., SPDT Cover: Glass Reinforced Polyester Options: Base connector sizes, wire leads, N.O./N.O. dual circuit and N.C./N.C. dual circuit. Ratings: Resistive: Inductive: 15 8 4 1 0.5 AMP6 VDC AMP- 12 VDC AMP- 24 VDC AMP- 120 VAC AMP- 240 VAC Approximate Dead Band Standard Switches Contact Setting Dead Band 10-35 PSI 35-75 PSI 75-150 PSI 150-250 PSI 250-400 PSI 15-25 PSI 25-35 PSI 40-60 PSI 50-70 PSI 80-100 PSI 1.47” REF. 5000 Series Ultra Duty Pressure Switches Contact Setting 10-35 PSI ±4 psi 35-75 PSI ± 6 psi 75-150 PSI ±10 psi 150-250 PSI ± 15 psi 250-400 PSI ± 20 psi Factory Circuitry Set At 20 PSI 60 PSI 100 PSI 200 PSI 2 Terminals Screw Part # Blade Part # N.O. 83298 83313 N.C. 83299 83314 DC* 83300 83315 N.O. 83301 83316 N.C. 83302 83317 DC* 83303 83318 N.O. 83304 83319 N.C. 83305 83320 DC* 83306 83321 N.O. 83307 83322 N.C. 83308 83323 DC* 83309 83324 N.O. 83310 83325 N.C. 83311 83326 300 PSI DC* 83312 83327 Metri-Pack Switches 10-30 PSI 30-65 PSI 65-125 PSI 125-200 PSI 200-400 PSI 3 20-35 PSI 35-55 PSI 60-85 PSI 85-115 PSI 150-200 PSI Metri-Pack Integral Connector (See Note 1) Contact Setting 10-30 PSI ± 4 psi 30-65 PSI ± 5 psi Factory Circuitry Set At 20 PSI 45 PSI 85 PSI 65-125 PSI ± 7 psi 125-200 PSI ± 10 psi 200-400 PSI ± 15 psi 165 PSI Part # N.O. 83328 N.C. 83329 DC* 83330 N.O. 83331 N.C. 83332 DC* 83333 N.O. 83334 N.C. 83335 DC* 83336 N.O. 83337 N.C. 83338 DC* 83339 N.O. 83340 N.C. 83341 DC* 83342 300 PSI Note 1: Mating connector for N.O. and N.C. is Packard Part# 15300027; Mating connector for DC is Packard Part# 12034147. DC*- The N.C. is the reference circuit for the DC Switch; the N.O. circuit is not adjusted. The approximate dead band between the N.C. and N.O. circuit is shown in the charts. For applications requiring the N.O. circuit as the reference circuit, the N.C. circuit is not adjusted. Set Points from 0.5 to 150 psi 5000 Series Extended Duty Pressure Switch With Direct Action Blade Contacts The 5000 Series switch is specifically designed to stand up to extended duty applications. This switch is factory set but capable of field adjustment. It features a Kapton diaphragm for compatibility with a wide variety of fluids, and various terminations including a Metri-Pack connector that forms a tight seal when connected. Among the outstanding design benefits are its durable construction, compact size, and enhanced set point integrity. Standard Specifications Type: Direct action blade contact Contacts: Silver alloy, gold plated Set Point: Factory set from 0.5 to 150 PSI Operating Pressure: 150 PSI for 0.5-24 PSI set point range, 250 PSI for 25-150 PSI set point range Proof Pressure: 500 PSI Burst Pressure: 750 PSI for 0.5-24 PSI set point range 1250 PSI for 25-150 PSI set point range. Ratings: Resistive: 15 8 4 Inductive: 1 0.5 AMPAMPAMPAMPAMP- 6 12 24 120 240 VDC VDC VDC VAC VAC Switch Boot P/N 79380 for Vacuum and Pressure 2.9” REF. Diaphragm: Polyimide film 2.3” REF. Temperature Range: -40° F to + 250° F Connector: 1/8 -27 NPT male thread Terminals: #8-32 screws, 1/4” blade, 280 Series Metri-Pack Circuitry: SPST-N.O., N.C., 1 circuit adjustable dual circuit, or 2 circuits adjustable dual circuit. 1.47” REF. 1.47” REF. Also available are N.O./N.O. dual circuit 5000 Series Switch with Screw Terminals and N.C./N.C. dual circuit. Base: Plated Steel Cover: Glass reinforced polyester Options: Brass, plastic or stainless steel base; various base connector thread sizes; wire leads (potted & sealed). NOTE: OPERATING MEDIA (PRESSURE SWITCH) The pressure switch is designed to operate with air, motor oils, transmission oils, jet fuels and other similar hydrocarbon media. 4 5000 Series Switch with Metri-Pack Terminal 5000 Series Pressure Switch With Standard Terminal Contact Setting 0.5-1 PSI ±0.3 1.1-3 PSI ±0.5 3.1-7 PSI ±1 8-13 PSI ±2 14-24 PSI ±3 25-50 PSI ±5 51-90 PSI ±7 91-150PSI ±10 Factory Set At Circuitry 1 PSI 2 PSI 4 PSI 10 PSI 15 PSI 35 PSI 60 PSI 100 PSI N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. N.O. N.C. Single Circuit 1 Terminal Part Number Screw 78630 78634 78142 78149 78143 78150 78144 78151 78145 78152 78146 78153 78147 78154 78148 78155 Single Circuit 2 Terminals Part Number Blade 78631 78635 78399 78406 78400 78407 78401 78408 78402 78409 78403 78410 78404 78411 78405 78412 Screw 78628 78632 76051 76061 76575 76577 76576 76578 76052 76062 76053 76063 76054 76064 76055 76065 Blade 78629 78633 76056 76066 76583 76585 76584 76586 76057 76067 76058 76068 76059 76069 76060 76070 Dual Circuit Dual Circuit One circuit adjustable1 Both circuits adjustable2 Part Number Screw Blade 78711 78712 76071 76076 76579 76587 76580 76588 76072 76077 76073 76078 76074 76079 76075 76080 5000 Series Pressure Switch With Metri-Pack Terminal Single Circuit (Mates with Packard P/N 15300027) Contact Factory Circuitry Setting Set At 1-3 PSI N.O. 2 PSI ±0.5 N.C. 4-6 PSI N.O. 5 PSI ±1 N.C. 7-12 PSI N.O. 10 PSI ±2 N.C. 13-24 PSI N.O. 20 PSI ±3 N.C. 25-46 PSI N.O. 35 PSI ±5 N.C. 47-76 PSI N.O. 60 PSI ±6 N.C. 77-100 PSI N.O. 85 PSI ±7 N.C. 101-126 N.O. 115 PSI ±9 N.C. 127-150 PSI N.O. 135 PSI ±10 N.C. Dual Circuit One circuit adjustable1 (Mates with Packard P/N 12034147) Part Number Part Number 77029 77020 77030 77021 77031 77022 77032 77023 77033 77024 77034 77025 77035 77026 77036 77027 77037 77028 77038 77039 77040 77041 77042 77043 77044 77045 77046 Note 1: Expected Dead Band (Higher than N.C. circuit) Contact Setting 0.5-3 PSI 4-7 PSI 8-13 PSI 14-24 PSI 25-50 PSI 51-90 PSI 91-150 PSI Dead Band 1.5 PSI 2.5 PSI 3.5 PSI 8 PSI 15 PSI 23 PSI 40 PSI 5 Dual Circuit Both circuits adjustable2 (Mates with Packard P/N 12034147) Contact Setting3 3-4 PSI ±0.5 5-10 PSI ±1 11-24 PSI ±2 25-46 PSI ±3 47-76 PSI +5/-2 77-100 PSI +7/-2 101-126 PSI +9/-2 127-150 PSI +10/-2 Part Number 77047 77048 77049 77050 77051 77052 77053 77054 Contact Setting3 3-4 PSI ±0.5 5-8 PSI ±1 9-24 PSI ±2 25-50 PSI ±3 51-90 PSI +5/-2 91-150 PSI +8/-2 Part Number Screw Blade 76081 76086 76582 76590 76082 76087 76083 76088 76084 76089 76085 76090 Notes: 1. The N.C. circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. The expected dead band between the N.C. & N.O. circuit is shown in the chart below. For applications requiring the normally open circuit as the reference circuit the N.C. circuit is not adjusted. 2. Switch may be adjusted so that: A. N.C. circuit opens before N.O. circuit closes. B. N.C. and N.O. circuit have same set point. C. N.O. circuit closes before the N.C. circuit opens. (There is no dead band and both circuits are on for a brief period of time.) 3. The tolerances given in the table are applicable to a switch adjusted so that the N.O. circuit closes before the N.C. circuit opens and applies to the N.C. circuit. The N.O. set point and tolerances are such that a minimum overlap of 1 PSI exists during which both circuits are on. Set Points from 1.1” to 22” Hg 5000 Series Extended Duty Vacuum Switches With Direct Action Blade Contacts The 5000 Series switch is specifically designed to stand up to extended duty applications. This switch is factory set. It features a fluorosilicone rubber diaphragm for compatibility with a wide variety of fluids, and various terminations including a Metri-Pack connector that forms a tight seal when connected. Among the outstanding design benefits are its durable construction, compact size, and enhanced set point integrity. 2.3” REF. Switch Boot P/N 79380 for Vacuum and Pressure Standard Specifications Type: Direct action blade contact Silver alloy, gold plated Factory set 1.1 to 22” Hg Contacts: Set Point: Vacuum: Operating Pressure: 30” Hg vacuum max. Burst Pressure: 150 PSI Ratings: Resistive: Inductive: Diaphragm: Temperature Range: Connector: Terminals: Circuitry: Base: Cover: Options: 15 AMP6 VDC 8 AMP- 12 VDC 4 AMP- 24 VDC 1 AMP- 120 VAC 0.5 AMP- 240 VAC Fluorosilicone elastomer -40° F to + 250° F 1/8-27 NPT male thread #8-32 screws, 1/4” blade, 280 Series Metri-Pack SPST-N.O., N.C. Brass Glass reinforced polyester Various base connector thread sizes; wire leads (potted & sealed). 1.47” REF. 5000 Series Switch with Screw Terminals 5000 Series Vacuum Switch Internally Grounded Part Number Contact Setting 1.1-22” Hg Circuitry N.O. N.C. Screw Blade Screw Blade 78813 78815 78814 78816 77342 77343 77344 77345 Standard set points are 2”Hg(27” H2O), 4”Hg, 9”Hg, and 17”Hg Contact Setting Tolerance 1.1-3”Hg (15-41”H2O) ±.22”Hg(3”H2O) 4-8”Hg ±1”Hg 9-17”Hg ±2”Hg 18-22”Hg ±3”Hg 6 Two Terminals Part Number Set Points from 200 to 1000 psi 5000 Series Extended Duty Piston Switches With Direct Action Blade Contacts 3.05” REF. 2.45” REF. The 5000 Series piston switch is specifically designed for extended duty applications with set point requirements from 200 to 1000 PSI. This switch is factory set with various terminations available including a Metri-Pack connector that forms a tight seal when connected. Among the outstanding design benefits are its durable construction, compact size, and enhanced set point integrity. This switch has a wide media compatibility making it ideal for a number of applications. Standard Specifications Type: 1.47” REF. 1.47” REF. 5000 Series Piston Switch with Screw Terminals 5000 Series Piston Switch with Metri-Pack Terminal Piston Switch with Standard Terminal Contact Setting Range 200-400 ±30 401-800 ±60 801-1000 ±90 Approximate Differential 30-100 40-125 50-180 Circuitry N.O. N.C. N.O. N.C. N.O. N.C. Piston Switch with Metri-Pack Terminal Contact Setting Range Approximate Differential 200-350 30-100 351-500 40-125 ±30 ±45 501-750 ±60 50-150 Contacts: Set Point: Pressure: Operating Pressure: 1000 PSI Proof Pressure: 2000 PSI Burst Pressure: 3000 PSI Ratings: Resistive: Single Circuit Part Number Screw Blade 79700 79701 79702 79703 79704 79705 79706 79707 79708 79709 79710 79711 Dual Circuit * one circuit adjustable Part Number Blade Screw 79712 79713 79714 79715 79716 79717 Single Circuit (Mates with Packard P/N 15300027) Dual Circuit * one circuit adjustable (Mates with Packard P/N 12034147) Circuitry Part Number Part Number N.O. N.C. N.O. N.C. N.O. N.C. 79718 79719 79720 79721 79722 79723 79724 79725 79726 * Note: The N.C. circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. For applications requiring the normally open circuit as the reference circuit, the N.C. circuit is not adjusted. Specify: 1. Set point 2. Actuate on increasing or decreasing pressure 3. SPST N.O. or N.C. SPDT. 7 Direct action blade contact Silver alloy, gold plated Factory set 200-1000 PSI 15 AMP6 VDC 8 AMP- 12 VDC 4 AMP- 24 VDC Inductive: 1 AMP- 120 VAC 0.5 AMP- 240 VAC Standard Seal: Nitrile (others available) Temperature Range: -40° F to + 250° F Connector: 1/2-20 UNF (o-ring fitting) Terminals: #8-32 screws, 1/4” blade, 280 Series Metri-Pack Circuitry: SPST-N.O., N.C., D.C. Base: Steel Cover: Glass reinforced polyester Options: Brass, stainless steel base; o-ring fittings; seal for brake fluid; wire leads (potted and sealed); boot p/n 79380 (see photo on page 4.) Set Points from 2 to 70 psi and 2” to 22” Hg Series III Factory Set Variable Differential Pressure & Vacuum Switches With Snap Action Contacts The Series III switch is a customizable switch built per customer specifications. It features a non-ferrous chamber and excellent set point integrity at extreme temperatures. The exclusive snap switch features: Low-contact resistance, wiping action, fast transfer time, gold over silver contacts, and an adjustable differential. It’s been thoroughly tested for shock and vibration resistance and is particularly valuable in applications where hysteresis, fast transfer time, and low contact resistance are vital. Vacuum Switch Standard Specifications Type: Set Point: Vacuum: 2.5” REF. Snap action switch Factory set 2 to 22” Hg 15 to 36” H2O Operating Pressure: 200 PSI Proof Pressure: 350 PSI Burst Pressure: 500 PSI Ratings: Resistive: Pressure Switch Standard Specifications Type: Set Point: Pressure: Operating Pressure: Proof Pressure: Burst Pressure: Ratings: Resistive: Inductive: Diaphragm: Temperature Range: Connector: Terminals: Circuitry: Base: Housing: Options: Terminations: Connectors: 1.69” REF. Snap action switch Factory set 1-70 PSI 200 PSI 350 PSI 500 PSI 15 AMP6 8 AMP- 12 4 AMP- 24 1 AMP- 120 0.5 AMP- 240 Dry circuits VDC VDC VDC VAC VAC Beryllium copper -40° F to + 250° F 1/8 -27 PTF SAE short male thread 8” Wire leads-18 ga. SPST-N.O. or N.C., SPDT Brass Die cast zinc Silver contacts, silver soldered base Wire leads with wide selection of Cannon, Packard, AMP, and others available 1/4” and 3/8” PTF SAE short; 1/2-20 UNF (o-ring fitting); 3/8-24 UNF (3/16” tube); 7/16-24 UNF (1/4” tube); and metric Series III Pressure Switch Inductive: (Vacuum Switch Similar) Series III pressure and vacuum switches are custom built switches designed to customer specifications therefore minimum ship quantitities are required and are not available off-the-shelf. Pressure Switch/Factory Set Reference # 120000 120001 120002 120003 120004 Set Point Range Differential 2-4 PSI 4-12 PSI 12-24 PSI 24-40 PSI 40-70 PSI 1-1.5 PSI 2-6 PSI 8-12 PSI 10-18 PSI 15-20 PSI Vacuum Switch/Factory Set Reference # Set Point Range Differential 4-12” H2O 15-36” H2O 120005 0.4-1” Hg 2-6” Hg 120006 120007 0.4-1” Hg 6-12” Hg 120008 0.6-1.5” Hg 12-22” Hg Specify:1. Set Point 2. Actuate on increasing or decreasing pressure 3. SPST N.O. or N.C., SPDT 8 Diaphragm: Temperature Range: Connector: Terminals: Circuitry: Base: Housing: Options: 15 8 4 1 0.5 Dry AMP6 VDC AMP12 VDC AMP24 VDC AMP- 120 VAC AMP- 240 VAC circuits Silicone rubber -40° F to + 250° F 1/8 -27 PTF SAE short male thread 8” Wire leads-18 ga. SPST-N.O. or N.C., SPDT Brass Die cast zinc Silver contacts, silver soldered base, fluorosilicone rubber diaphragm Terminations: Wire leads with wide selection of Cannon, Packard, AMP, and others available Connectors: 1/4” and 3/8” PTF SAE short; 1/2-20 UNF (o-ring fitting); 3/8-24 UNF (3/16” tube); 7/16-24 UNF (1/4” tube); and Metric Set Points from 35 to 3000 psi Series V High Pressure Environmentally Sealed, Extreme-Duty Switches With Snap Action Contacts The Series V switch is a high pressure switch with set points up to 3000 PSI and is built to exact customer specifications. Excellent set point integrity at extreme temperatures and wide fluid compatibility make this switch ideal for extreme duty applications. And, under all operating conditions, it boasts an excellent response time. Like the Series III, the Series V 3.19” REF. exclusive snap switch has an adjustable differential, low contact resistance, wiping action, fast transfer time, and gold over silver contacts. This switch is beneficial where hysteresis, fast transfer time, and low contact resistance are vital. Standard Specifications Type: Snap action switch Set Point: Factory set Pressure: 35-300 PSI (elastomeric diaphragm) 100-3000 PSI (steel piston) Operating Pressure: Diaphragm 300 PSI Piston 3000 PSI Proof: Diaphragm 500 PSI Piston 5000 PSI Burst: Diaphragm 2000 PSI Piston 10000 PSI Ratings: Resistive: Inductive: Temperature Range: Connector: Piston: Terminals: Circuitry: Base: Housing: Options: Terminations: Connectors: 15 AMP6 8 AMP- 12 4 AMP- 24 1 AMP- 120 0.5 AMP- 240 Dry circuits VDC VDC VDC VAC VAC 3.34” REF. 1.187” REF. 1.187” REF. Diaphragm Type Piston Type Diaphragm Type Reference Number Set Point Range Differential 26900 26901 26902 26903 35-50 PSI 50-100 PSI 100-200 PSI 200-300 PSI 10-15 10-15 10-15 10-20 PSI PSI PSI PSI Piston Type -40°F to +250°F Reference Number Set Point Range Differential Diaphragm 1/8-27 PTF 35-50 PSI 26904 100-150 PSI SAE short male thread 50-75 PSI 26905 150-250 PSI 3/4-16 UNF (o-ring fitting) 75-100 PSI 26906 250-500 PSI 8” Wire leads-18 ga. 26907 500-750 PSI 100-150 PSI SPST-N.O. or N.C., SPDT 26908 750-1000 PSI 150-300 PSI Plated steel 26909 1000-1250 PSI 175-350 PSI Plated steel 26910 1250-1500 PSI 175-360 PSI Silver contacts 26911 1500-1750 PSI 220-370 PSI Wide selection of 26912 1750-2000 PSI 230-380 PSI Cannon, Packard, AMP, 26913 2000-2250 PSI 250-390 PSI and others available 26914 2250-2500 PSI 355-400 PSI 1/2-20 UNF (o-ring fitting); 26915 2500-2750 PSI 370-420 PSI 9/16-18 UNF (o-ring 26916 2750-3000 PSI 385-450 PSI fitting); M14x1.5 (o-ring fitting); Others available upon request. 9 Specify:1. Set Point 2. Actuate on increasing or decreasing pressure 3. SPST N.O. or N.C., SPDT Series V pressure and vacuum switches are custom built switches designed to customer specifications therefore minimum ship quantitities are required and are not available off-the-shelf. Switch Definitions and Terminology Pressure/Vacuum Switch - A device that senses a change in pressure/ vacuum and opens or closes an electrical circuit when the set point is reached. Set Point - The pre-determined pressure/vacuum value that is required to open or close the electrical contacts in the switch. Electrical Contacts - The elements in the switch that electrically respond to the media applied to the actuator. Snap action contacts with a “self-cleaning” wiping effect are used in Series III and Series V switches. Direct action blade contacts are used in the 5000 Series. Pressure Switch Actuator - The member in the switch which receives the media and ultimately strokes the electrical contacts to open or close at the designated set point. The actuator in the Series III is a beryllium copper or silicone rubber diaphragm. An elastomeric diaphragm or piston actuator is used in the Series V. The 5000 Series uses a polyimide film diaphragm. Normally Open (SPST-N.O.) - A normally open switch does not conduct an electrical signal until the actuator is moved by the media causing the contacts to close. Normally Closed (SPST-N.C.) - A normally closed switch conducts electricity until the actuator is moved by the media causing the contacts to open. Dual Circuit (SPDT) - A normally open and normally closed circuit are contained in a switch. Dual Circuit (N.O./N.O.) - Switch contains two normally open circuits. System Pressure/Vacuum - This is the normal pressure/vacuum that would be present at the switch actuator. This value is important in order to apply the proper switch configuration. Even though the set point may be relatively low, the system pressure would continue to be applied to the switch actuator in most cases. Proof Pressure - This specification is the maximum over-pressure condition that the switch can have for a specified period of time and still maintain set point integrity. Burst Pressure - This specification is the maximum over pressure condition that the switch can withstand without experiencing leakage. Dry Circuit Load - Typically this would be a very low electrical load associated with microprocessors when the open circuit voltage is .03V or less and the current is 40mA or less. Resistive Load - A load in which the voltage is in phase with the current. Inductive Load - A load in which the voltage leads the current. Motor Load - The load of a motor at rated horsepower and speed. Capacitive Load - A load which the current leads the voltage. Differential - The difference between opening (actuation) pressure and the closing (de-actuation) set points. This is also referred to as “dead band”. For example, a switch set at 150 PSI to open on increasing pressure and close at 95 PSI on decreasing pressure would have a differential of 55 PSI (150-95=55). Dual Circuit (N.C./N.C.) - Switch contains two normally closed circuits. 10 Conversion Factors Convert To Multiply By kPa PSI BARS PSI Hg” PSI H2O” PSI H2O” Hg” C° F° PSI kPa PSI BARS PSI Hg” PSI H2O” Hg” H2O” F° C° .145 6.8948 14.5 .069 .4912 2.036 .03613 27.6778 .07355 13.5962 1.8(C° +17.78) F-32÷1.8 Honeywell's Springfield and Spring Valley, Illinois facilities manufacture a broad range of electro and electronicmechanical products that include Hobbs hour meters, pressure and vacuum switches, off-highway vehicular lighting, transmission shifters, turn signal controls, rotary switches, and off-highway vehicular hand controls. Honeywell's customer base is very broad including industries such as automotive, agricultural, material handling, construction, marine, medical, heavy truck, lawn and garden, recreational, generators, compressors and aviation. Our commitment to continuous improvement and total quality management will allow for further expansion of its product lines and customer base while maintaining the highest standards of excellence. MANUFACTURING Honeywell's commitment to the customer in past years and present is what has helped us develop our world-class manufacturing systems. Some of the methods by which we continuously improve products and processes are as follows: Six Sigma methodology is a strategy used to accelerate improvements in our processes, products and services, and to reduce manufacturing costs and improve quality. It achieves this by relentlessly focusing on eliminating waste and reducing defects and variations. Continuous Flow Process utilizing “Rabbit Chase” concepts are used in the focused factories in order to achieve the lowest total cost, defect-free product. Single Minute Exchange of Dies (SMED method) provides reduced time in the molding cell. Statistical Process Control is used for measuring critical dimensions and controlling manufacturing processes. Poka-Yoke method and computerized test equipment are utilized to eliminate scrap and rework. Kanban cards are used to pull raw material and piece parts through the factory. Bar coding and electronic data interchange (EDI) are available. QUALITY SYSTEMS It is the goal of Honeywell to meet customer value-needs through continuously improved products and processes. That is the basis by which we work to create a partnership with our customers. Evidence of our commitment is proven by a goal of a Shipped Product Quality Level (SPQL) of 100 ppm. We utilize Advanced Quality Planning, and a QS9000 based quality system. 11 Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Sensing and Control Honeywell P.O. Box 19424 Springfield, IL 62794-9424 USA email: www.honeywellhobbs.marketing@honeywell.com Catalog 10-1003, GLO Printed in the U.S.A. © 2004 Honeywell International Inc. All Rights Reserved. Sales and Service Honeywell serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: INTERNET: www.honeywell.com/hobbs E-mail: honeywellhobbs.marketing@honeywell.com For Honeywell pressure and vacuum switches contact the Springfield location at 217-753-7798 or visit www.honeywell.com/hobbs www.honeywell.com/hobbs
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cefbca92-7202-11d8-b3c6-000a95961238 Create Date : 2004:03:09 13:44:50Z Metadata Date : 2004:03:09 13:48:59-06:00 Modify Date : 2004:03:09 13:48:59-06:00 Creator Tool : Adobe InDesign CS (3.0) Rendition Class : proof:pdf Document ID : adobe:docid:indd:cb62c95b-735a-11d8-8ee4-f103ca91f682 Derived From Instance ID : cb62c957-735a-11d8-8ee4-f103ca91f682 Derived From Document ID : adobe:docid:indd:66df766a-56ff-11d8-be05-f5e7016473a8 Manifest Link Form : ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:abda0e3a-7033-11d8-b5e4-fb32818dce01, uuid:d302e089-7033-11d8-b5e4-fb32818dce01 Manifest Reference Document ID : adobe:docid:photoshop:abda0e39-7033-11d8-b5e4-fb32818dce01, adobe:docid:photoshop:d302e088-7033-11d8-b5e4-fb32818dce01 Format : application/pdf Title : 230642Final Switch Catalog .indd Tagged PDF : Yes Trapped : False Creator : Adobe InDesign CS (3.0) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools