Honeywell Hyperion 1300 G HP1300 QS User Manual To The Cce6bebe 66cb 4ab9 9836 E8fb6f8c4de1
User Manual: Honeywell Hyperion 1300 g to the manual
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Hyperion 1300g
Linear Scanner
Quick Start Guide
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.br.
Перейти на русскоязычный сайт www.honeywellaidc.com.
日本語 : www.honeywellaidc.com をご覧ください。
如要到中国 www.honeywellaidc.com（简体）。
한글 www.honeywellaidc.com 로 이동합니다 .
HP1300-QS Rev A
12/10
Note: Refer to your user’s guide for information about cleaning your
device.
Getting Started
Turn off the computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Serial (RS232):
RS485:
Keyboard Wedge:
Reading Techniques
Standard Product Defaults
The following bar code resets all standard product default settings.
Standard Product Defaults
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS
terminal using port 9B, scan the appropriate code below to program
the terminal, then power cycle the cash register.
IBM Port 9B HHBCR-1
Interface
IBM Port 9B HHBCR-2
Interface
Note: For additional RS485 interface selections, see the User’s
Guide for your product at our website,
www.honeywellaidc.com.
Keyboard Country
Scan the Program Keyboard Country bar code below, then scan
the numeric bar code(s) from the end of this document, then the Save
bar code to program the keyboard for your country. As a general
rule, the following characters are not supported by the scanner for
countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~.
Program Keyboard Country
Country Code
Scan
Country Code
Scan
Belgium
1
Italy
5
Denmark
8
Norway
9
Finland
France
2
3
Spain
Switzerland
10
6
Germany/Austria
4
USA (Default)
0
Great Britain
7
Save
Trigger
The following bar codes will allow you to use the reader in Manual
Trigger mode (need to press the trigger to read), Automatic Trigger
mode (the beam is always on), or Presentation mode (the reader is
activated when it “sees” a bar code).
Manual Trigger
(Default)
Automatic Trigger
Presentation Mode
Reread Delay
This sets the time period before the scanner can read the same bar
code a second time. Setting a reread delay protects against
accidental rereads of the same bar code.
Medium Reread Delay
Suffix
If you want a carriage return after the bar code, scan the Add CR
Suffix bar code. To add a tab after the bar code, scan the Add Tab
Suffix bar code. Otherwise, scan the Remove Suffix bar code to
remove the suffixes.
Add CR Suffix
Add Tab Suffix
Remove Suffix
Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Add Code ID Prefix To All Symbologies
(Temporary)
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website, www.honeywellaidc.com.
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
website, www.honeywellaidc.com.
1.
2.
3.
4.
5.
6.
7.
Scan the Enter Data Format symbol.
Primary/Alternate Format: scan 0 for Primary Format
Terminal Type: scan 099 for any terminal type
Code I.D.: scan 99 for any bar code type
Length: scan 9999 for any length bar code.
Editor commands: use the Programming Chart that follows.
Scan Save to save your entries.
Enter Data Format
Clear All Data Formats
Save
Programming Chart
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Save
EZConfig
To access additional features for the scanner use EZConfig, an
online configuration software tool, available from our website at
www.honeywellaidc.com.
Technical Assistance
Contact information for technical support, product service, and repair
can be found at www.honeywellaidc.com.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your
product’s warranty information.
User Documentation
For localized versions of this document, and to download the User’s
Guide, go to www.honeywellaidc.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
© 2010 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Author : E412046 Create Date : 2005:11:18 12:53:09Z Modify Date : 2011:12:13 14:42:44-05:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : HP1300-QS.fm Creator : E412046 Creator Tool : FrameMaker 9.0 Metadata Date : 2011:12:13 14:42:44-05:00 Producer : Acrobat Distiller 9.4.0 (Windows) Document ID : uuid:97765836-0e6a-429d-8841-e0c734fb72ed Instance ID : uuid:fa82d1d1-c08c-41d7-bdb5-770ea76a6945 Page Mode : UseOutlines Page Count : 12EXIF Metadata provided by EXIF.tools