Honeywell RTHALC1 Tag User Manual NGC Quick Reference Guide

Download:
Mirror Download [FCC.gov]
Document ID	3415371
Application ID	UeDSzsk0b8pD4uEI18/5mw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	140.53kB (1756647 bits)
Date Submitted	2017-06-06 00:00:00
Date Available	2017-12-06 00:00:00
Creation Date	2017-02-23 12:51:41
Producing Software	Mac OS X 10.11.6 Quartz PDFContext
Document Lastmod	2017-05-26 16:35:11
Document Title	NGC Quick Reference Guide
Document Creator	Keynote

Name
Role
Location
STEP 1:
Gather Materials
Locate a fully charged gateway, a CT-50 or mobile device, pre-paid
return shipping slip, a clear shipping pouch / sleeve and appropriate
amount of tags for the shipment.
Check the physical quanBty of the gateway and tags against the
amount listed in the OBD and on the shipping document
STEP 2:
Check Gateway Battery Status
While sBll plugged in, confirm that the baHery icon displays a green
LED light- this indicates a full charge
Fully charged
Solid green
Faulty Battery OR
Battery Has No Charge Left
Alternately blinking red and green
Charging
Solid red
STEP 3:
Pair Gateway With Tags Before They’re Powered On
Pair each tag to the gateway by holding the gateway pairing
button and tapping the tag to the gateway, verifying a successful
pairing has occurred each time (see user guide).
Successful Pairing
STEP 4:
Apply Shipping Labels to Box
Failed Pairing
239
NFC button solid
green
NFC button
blinks red
239
Waybill
16348D80F6
239
Short beep
16348D80F6
6F08D84361
Shipping #
123456 7 8910
Long beep
16348D80F6
16348D80F6
16348D80F6
The Tag LED light will not display, because
the Tag is not powered on.
If Battery has no charge left, the
Gateway needs 15-20 minutes to precharge, before the battery starts
charging normally.
STEP 6:
Confirm Tags are Powered On
STEP 5:
Turn on Tag Battery
STEP 8:
Launch and Refresh Movilizer App
• Open the Movilizer app on the Ct-50 or Mobile device.
Remove the baHery strips from each tag and verify they are
powered on (see user guide). Then remove the large sBcker
backing and adhere the tag to the shipment
Battery Activated and
Tag Paired with Gateway
LED blinks red 3 times, then
blinks green once, then turns off.
E0023D7304090A6A
Tag-powered on
x3
E0023D7304090A6A
PULL TO ACTIVATE
x1
• Click the refresh buHon at the boHom of the app (two
arrows), to display the most current shipment informaBon.
STEP 9:
Select Shipment
Click the “Shipments – OBD” icon and locate the
Shipment ID under the “New Shipments:” list and click it
• Click Ok once the screen is refreshed (thumbs up).
Note: Android and iOS Movilizer apps have different visual
treatments, but the same screens / process.
Bad Tag
No LED indicator
PULL TO ACTIVATE
STEP 7:
Attach Tags to Shipment
E0023D7304090A6A
Then remove the large sticker backing and adhere the
tag to the shipment.
Tag-powered on
E0023D7304090A6A
Intel Confidential | Laura Rumbel & Amber Ward | January 2017
STEP 10:
Review Shipment Info
OPTIONAL STEP
View Instructions
STEP 11:
Pair Gateway With Shipment
STEP 12:
Confirm # of Tags and Find Tag
Review the basic shipment information, route, monitoring
and all other info to ensure it is correct against the
information available to you on the shipping document.
Click “View Instructions” for step-by-step information and
video tutorials on how to set up shipments with Gateways
& Tags.
Click the “Scan Gateway” button at the bottom of the
screen and scan the barcode on the gateway using the
rear facing camera on the mobile device. This pairs the
Gateway with the Shipment for tracking purposes.
Scanning the Gateway will bring up the list of tags you
already connected to the gateway Verify that the correct
number of tags are listed here. Find the shipment Tag.
Step 13:
Pair Tags With Boxes / Pallets
STEP 14:
Review Shipment Data & Complete Shipment
STEP 15:
Attach Gateway to the Box or Pallet
Discuss Shipment Loading Requirements
Find the tag ID in the OBD app tag list and click on it, this
will bring up a scanner. Scan the unique box/ pallet
barcode ID where you attached your tag. This pairs the
Tag with the box or pallet it’s on, to identify which
Traceable Shipping Unit (TSU) has been compromised if
a sensor limit is exceeded. Repeat until all tags are
associated.
Click next and review all the data is correct in the shipment. Click
“Complete Shipment.”
Place the gateway, shipping document and prepaid return
shipping packaging in the shipment envelope.
When loading pallets with Tags and Gateways onto a
truck, try to place one pallet in the back of the truck, one
pallet in the center of the truck and one pallet with the
Gateway right by the door.
Make sure that the Gateway faces the truck door, and is
as close to the door as possible to ensure the Gateway
signal can best maintain cell connectivity.
Tag-powered on
E0023D7304090A6A
Tag-powered on
E0023D7304090A6A
Intel Confidential | Laura Rumbel & Amber Ward | January 2017

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2017:02:23 12:51:41Z
Creator Tool                    : Keynote
Modify Date                     : 2017:05:26 16:35:11+08:00
Metadata Date                   : 2017:05:26 16:35:11+08:00
Producer                        : Mac OS X 10.11.6 Quartz PDFContext
Format                          : application/pdf
Title                           : NGC Quick Reference Guide
Document ID                     : uuid:a9fa8fe4-bb23-417a-8ad6-9482ccf96663
Instance ID                     : uuid:8a16d9ad-5ad5-42f7-96d2-89d4d2e5c5cf
Page Count                      : 2
Creator                         : Keynote

EXIF Metadata provided by EXIF.tools