Honeywell TH8320WF01 WiFi Thermostat User Manual manual

Honeywell International Inc WiFi Thermostat manual

manual

User GuideWi-Fi Touchscreen Programmable ThermostatModel RTH8580WF
69-2715EF—01 iiIn the box you will find• Thermostat• Wallplate (attached to thermostat)• Screws and anchors• Coin cell battery (inside the back of the thermostat)• Quick Start Guide• Thermostat ID Card• Wire labels• User Guide
WelcomeCongratulations on your purchase of a Honeywell Wi-Fi touchscreen programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.Honeywell’s Total Connect Comfort is the perfect solution if you travel frequently, own a vacation home, a business or manage an Investment property or if you are simply looking for peace of mind.
69-2715EF—01 2This thermostat works on 24 volt systems. It will NOT work on 120/240 volt systems.This thermostat contains a Lithium battery which may contain Perchlorate material.Perchlorate Material—special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorateMERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50°F (10°C).Need help?Visit wifithermostat.com or call 1-855-733-5465 for assistance before returning the thermostat to the store.
69-2715EF—01 3About your new thermostatHome screen quick reference ..................... 5Message center messages ......................... 6Preset energy-saving schedules ................. 8InstallationInstalling your thermostat ..........................10Connecting to your Wi-Fi network .............27Registering your thermostat online ........... 32OperationSetting the clock ........................................37Setting the fan ........................................... 38Selecting system mode .............................39Adjusting program schedules ....................40Overriding schedules temporarily .............41Overriding schedules permanently ...........42Setting vacation hold .................................43Setting filter reminder intervals .................44Cleaning the screen .................................. 45Unregistering thermostat...........................46Disconnecting Wi-Fi ..................................47Special features ........................................48Setting functions and options ....................51AppendicesFrequently asked questions ......................59Troubleshooting .........................................62Limited warranty ........................................68Table of contents
69-2715EF—01 4Features of your Wi-Fi thermostatWith your new thermostat, you can:• Connect to the Internet to monitor and control your heating/cooling system• View and change your heating/cooling system settings• View and set temperature and schedules• Receive alerts via email and get automatic upgradesYour new thermostat provides:• Smart Response Technology• Compressor protection• Heat/cool auto changeover
5 69-2715EF—01Home screen quick referenceOnce your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. To change settings, simply press the appropriate area lightly with your finger.Unless you change the lighting function, the screen is always lit at low intensity. When you touch the screen, the screen brightens.Set clockMessage centerSelect fan modeSelect system modeProgram schedulesOverride scheduleWi-Fi statusSchedule is on (does not display when off)Additional settingsLock screen for cleaningM31565MOREInside
69-2715EF—01 6 Message center messagesThe Message Center at the top of the screen communicates Wi-Fi connection and registration status. It also displays the MAC ID and MAC CRC for registering the thermostat at mytotalconnectcomfort.comDisplayed before you begin Wi-Fi setup.Displayed while connecting to the Wi-Fi network.Displayed after connecting to the Wi-Fi network. [Wi-Fi network name] Displayed when connected to the Wi-Fi network.Displayed when Wi-Fi connection is complete.Displayed when the thermostat fails to establish a connection to the Wi-Fi network.Displayed when the thermostat is connected to the Wi-Fi network but not registered at mytotalconnectcomfort.comDisplays the thermostat’s MAC ID and MAC CRC for registering at mytotalconnectcomfort.com [Found on your ID card] [Found on your ID card]
7 69-2715EF—01 Message center messagesDisplayed when the thermostat is registered at mytotalconnectcomfort.comDisplayed when the thermostat is removed from your Total Connect Comfort account.Wi-Fi signal strength. Displayed when the thermostat is connected to the Wi-Fi network and registered at mytotalconnectcomfort.comDisplayed if there is no Wi-Fi signal.
69-2715EF—01 8Preset energy-saving schedulesThis thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses by as much as 33% if used as directed. Savings may vary depending on geographic region and usage.Default Heat Settings Default Cool SettingsWAKE 6:00 am 70 °78 °LEAVE 8:00 am 62 °85 °RETURN 6:00 pm 70 °78 °SLEEP 10:00 pm 62 °82 °To change the settings, see pages 40–43.
9 69-2715EF—01Setting up your thermostatSetting up your Wi-Fi programmable touchscreen thermostat is easy. It is preprogrammed and ready to go as soon as it is installed and registered.Install your thermostat.Connect it to your home wireless network.Register online for remote access.Before you begin, you may want to watch a brief installation video. Use the QR Code® at the front of this guide, or go to wifithermostat.com231
69-2715EF—01 10Installing your thermostatYou might need the following tools to install this thermostat:• No. 2 Phillips screwdriver• Small pocket screwdriver• Pencil• Level (optional)• Drill and bits (3/16” for drywall, 7/32” for plaster) (optional)• Hammer (optional)• Electrical tape (optional)1 Switch OFF power.To protect your equipment, switch OFF the power to your heating/cooling system at the breaker box or the system switch.orM31535
11 69-2715EF—01CCMCR33823If you have an older thermostat with a sealed mercury tube, turn to page 2 for proper disposal instructions.Terminal designationInstalling your thermostat2 Remove old thermostat.Remove the old thermostat while leaving the wallplate and wiring in place.Take a picture of the wires on your old thermostat for later reference.
69-2715EF—01 12Installing your thermostat3 Label wires.Use the supplied sticky tags to label each wire as you disconnect it. Label wires according to the old thermostat terminal designations, not by wire color.Note: If no tag matches a wire terminal label, write the terminal label on a blank tag.Blank tagsTerminal designationCCMCR31537
13 69-2715EF—01M31538Installing your thermostat4 Remove wallplate.Remove the old wallplate from the wall after all wires have been labeled and disconnected.5 Separate Wi-Fi thermostat and its wallplate.On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull pieces apart.ThermostatWallplate (back view)Finger holds
69-2715EF—01 14Installing your thermostat6 Mount wallplate for Wi-Fi thermostat.Mount your new wallplate using screws and anchors included with the thermostat.If necessary:Drill 3/16-in holes for drywall.Drill 7/32-in holes for plaster.M31543Y2W2KRCRWYGCRCRO/BYGCHEAT PUMPCONVENTIONALLE/AUXKRYCWGMCR31539Wallplate
15 69-2715EF—01Note: The Wi-Fi thermostat requires a C wire to operate. The C, or common, wire brings 24 VAC power to the thermostat. Many older mechanical or battery operated thermostats do not require a C wire. If you don’t have a C wire, try:• Looking for an unused wire that is pushed into the wall. Connect that wire to C and check that it is connected to the 24 VAC common at your heating/cooling system. Check the video section at wifithermostat.com• Installing a new wire. If required, contact a contractor to install a new wire (go to wifithermostat.com to locate a contractor in your area).WiringFor conventional heating/cooling systems (natural gas, oil or electric furnace, air conditioner), see page 16. See “Glossary” on page 65 for further definition. For a heat pump system, see page 17. See “Glossary” on page 65 for further definition.Installing your thermostat
69-2715EF—01 16Y2W2KRCRWYGCRCRO/BYGCRWGCYHEAT PUMPCONVENTIONALLE/AUXKMCR31541Installing your thermostatWiring (conventional system)7A Connect wires.Wire the Wi-Fi thermostat to your conventional system.a Match the labels on the wires to the terminal labels. You must have a C wire. See page 15.b Loosen screws, insert wires into holes on inside edge of terminals, then tighten screws.c Push any excess wire back into the wall opening.d Continue to page 22.Remove metal jumper if you have both R and RC wiresLabels don’t match? See alternate wiring key on pages 18–19. Insert wires here
17 69-2715EF—01Installing your thermostatWiring (heat pump system only)7B Connect wires.Wire Wi-Fi thermostat to your heat pump.a Match the labels on the wires to the terminal labels on the new thermostat. You must have a C wire. See page 15.b Loosen screws, insert wires into holes on inside edge of terminals, then tighten screws.c If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No jumper is required.d Push any excess wire back into the wall opening.e Continue to page 22.Labels don’t match? See alternate wiring key on pages 20–21.MCR33529RCRO/BYGCHEAT PUMPLE/AUXKROGYCAUXInsert wires here
69-2715EF—01 18Installing your thermostatY2W2KY2W2RCRWYGCRCRWYGC123CONVENTIONALMetal JumperAlternate wiring (conventional system)Use this if your wire labels don’t match the terminal labels.Note: You must have a C wire or equivalent. See page 15.See key to 1 – 3 on page 19.
19 69-2715EF—01Installing your thermostatRemove metal jumper connecting R and RC only if you must connect both R and RC.If your old thermostat had both R and RH wires, remove metal jumper. Connect the R wire to the RC terminal, and the RH wire to the R terminal.Do not use K terminal.Alternate wiring key (conventional system)231
69-2715EF—01 20Installing your thermostatAlternate wiring (heat pump system only)Use this if your wire labels don’t match the terminal labels.Note: You must have a C wire or equivalent. See page 15. RCRO/BYGCLE/AUXKMCR33530AY2RCROYGC12334765HEAT PUMPMetal JumperAUXSee key to 1 – 7 on page 21.
21 69-2715EF—01Installing your thermostatAlternate wiring key (heat pump system only)Leave metal jumper between R and RC terminals in place.If your old thermostat had both V and VR wires, check wifithermostat.com for help.If your old thermostat had separate O and B wires, attach the B wire to the C terminal. If another wire is attached to the C terminal, check wifithermostat.com for help. Attach the O wire to the O/B terminal. Set System Function 0190 to 0 (see page 55). If your old thermostat had an O wire and not a B wire, attach the O wire to the O/B terminal. If your old thermostat had separate Y1, W1 and W2 wires, check wifithermostat.com for help.This is the system monitor. If the monitor finds a problem, you will see a red light in the upper right corner of the thermostat (shines through the cover).If old thermostat has separate wires on AUX and E, place both wires into the E/AUX terminal. If old thermostat has wire on AUX with a jumper to E, place wire on E/AUX terminal. No jumper is required.Do not use K terminal.2314567
69-2715EF—01 22M31542Installing your thermostat8 Install battery.Insert the coin cell battery (included), observing the correct polarity.Thermostat interior
23 69-2715EF—01Installing your thermostat9 Attach thermostat to wallplate.Align the thermostat to the wallplate and then snap into place.ThermostatWallplateM31543Y2W2KRCRWYGCRCRO/BYGCHEAT PUMPCONVENTIONALLAUX/EK
69-2715EF—01 24Installing your thermostat10 Switch heating/cooling system ON.Switch power back to ON for your heating/cooling system at the breaker box or the system switch.M31544or
25 69-2715EF—01 Installing your thermostat11 Set date and time.Touch s or t buttons to change displayed time and date. Press and hold a button to quickly change a setting.DayTimeMonthYear
69-2715EF—01 26Installing your thermostat12 Determine your heating/cooling system type.If your system type is conventional single stage, continue to “Connecting to your Wi-Fi network” on page 27.If your system is:• Conventionalmultistageheatandcool• Heatpumpwithoutbackupheat• Heatpumpwithbackupheat• Heatonly• CoolonlySee page 51 to match your thermostat to your system type, then continue to “Connecting to your Wi-Fi network” on page 27.If you are not sure of your heating/cooling system type or have other questions, go to wifithermostat.com
27 69-2715EF—01Connecting to your Wi-Fi networkTo complete this process, you must have a wireless device connected to your home wireless network. Any of these device types will work:• Laptop (recommended)• Tablet (recommended)• SmartphoneIf you get stuck... at any point in this procedure, restart the thermostat by removing the thermostat from the wallplate, wait for 5 seconds, and snap it back onto the wallplate. Return to Step 1 in this procedure, which starts on the next page.
69-2715EF—01 28The message at the top of your thermostat must say Wi-Fi SETUP.1 Connect to your thermostat.1a On your laptop, tablet or smartphone, view the list of available networks.1b Connect to the network called NewThermostat_123456 (the number will vary).Note: If you are asked to specify a home, public, or office network, select Home Network.M31566MOREInsideConnecting to your Wi-Fi network
29 69-2715EF—01Connecting to your Wi-Fi network2 Join your home network.2a To access the Thermostat Wi-Fi Setup page, open a web browser on your wireless device. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.12b On the Thermostat Wi-Fi Setup page, find the name of your home network and click its Connect button.2c Complete instructions for joining the network. Depending on your network setup, you may see an instruction such as Enter Password (your home network password).M31567
69-2715EF—01 30Connecting to your Wi-Fi networkNote: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page:• Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks.• If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list. Click on the new network in the list and enter the password if necessary. Click on Connect to join the network.
31 69-2715EF—01Connecting to your Wi-Fi networkM31568MOREInsideM31569MOREInside3 Make sure your thermostat is connected.Notice the thermostat message center. It will display CONNECTING... for up to 30 seconds, then CONNECTION SUCCESSFUL for one minute.Then you will see YOU ARE ALMOST DONE!If you don’t see these messages, see page 27.To register online for remote access to your thermostat continue on page 32.
69-2715EF—01 32Registering your thermostat onlineM31570To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps.1 Open the Total Connect Comfort web site.In an Internet browser, on your wireless device, open the Total Connect Comfort web site: mytotalconnectcomfort.com
33 69-2715EF—01Registering your thermostat online2 Login or create an account.If you have an account, click Login– or –click Create An Account2a Follow the instructions on the screen.2b Check your email for an activation message from My Total Connect Comfort.2c Follow activation instructions in the email.2d Log in.M31571
69-2715EF—01 34Registering your thermostat online3 Register your Wi-Fi thermostat.After you are logged in to your Total Connect Comfort account, register your thermostat. Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostat’s:• MACID• MACCRCThese IDs are listed on the Thermostat ID Card included with the thermostat, in the message center during this step, and on the interior of the thermostat. The IDs are not case sensitive. ® U.S. Registered Trademark.© 2012 Honeywell International Inc.69-2723EFS—01 M.S. 04-12Printed in U.S.A.HONEYWELL MODEL: RTH8580WFMAC ID: MAC CRC: 69-2723EFS-01Thermostat ID CardUse the MAC ID and CRC ID to register this product at mytotalconnectcomfort.comCarte d’identification de thermostatUtilisez l’identication MAC et l’identication CRC pour enregistrer ce produit à mytotalconnectcomfort.comTarjeta de identificación del termostatoUtilice la identicación MAC y la identicación CRC para inscribir este producto en mytotalconnectcomfort.com
35 69-2715EF—01Registering your thermostat onlineWhen the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message.In the thermostat message center you will see: CONGRATULATIONS SETUP COMPLETE!
69-2715EF—01 36Registering your thermostat onlineYour thermostat will display wireless signal strength.You can now control your thermostat from anywhere through your laptop, tablet, or smartphone.Total Connect Comfort free app is available for Apple® iPhone®, iPad® and iPod touch® devices at iTunes® or at Google Play® for all Android™ devices.
37 69-2715EF—01MCR31552MORE1 Press CLOCK to display setting arrows.2 Press s or t to adjust the time. (You can advance the time more quickly by holding the s or t buttons.)3 Press DONE to save and exit (or press CANCEL to exit without changing the time).Note: You should never need to adjust the real-time clock; it automatically updates for daylight saving time and all date/time information is stored.Note: To change the current week day format, see “Schedule Options” on page 53.Setting the clock
69-2715EF—01 381 Press FAN to select fan operation.2 Press FAN again to select ON or AUTO (toggle to re-select). The selected option blinks.3 Press DONE to save setting. Your selection appears under FAN.ON: Fan is always on.AUTO: Fan runs only when the heating or cooling system is on.MOREInsideMCR31553Setting the fan
39 69-2715EF—01Selecting system modeNote: The AUTO and EM HEAT system settings may not appear, depending on how your thermostat was installed.1 Press SYSTEM to display options.2 Press SYSTEM again to select an option. You may need to press two or three times to make a selection—the selected option blinks.3 Press DONE to save setting.Possible system modes:HEAT: Controls only the heating system.COOL: Controls only the cooling system.OFF: Heating/cooling systems are off.AUTO: Selects heating or cooling depending on the indoor temperature.EM HEAT (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is locked out.MOREInsideMCR31554
69-2715EF—01 40MORESLEEPSLEEPMCR31555Adjusting program schedules1 Press SCHED, then EDIT. Screen displays day buttons at top.2 Press day buttons (MON–SUN) to select days.3 Press s or t to set Wake time for selected day(s).4 Press s or t to set Heat and Cool temperature for this time period.5 Press another period (LEAVE, RETURN, SLEEP) and set time and temperatures for each.6 Press DONE to save and exit (or press CANCEL to exit without saving changes).Note: You can press CANCEL PERIOD to eliminate any unwanted time period.
41 69-2715EF—01Overriding schedules temporarily1 On the home screen, press s or t to immediately adjust the temperature.2 Adjust the time to when you want the hold to end (the default is the end of the current period).The new setting will be maintained until the time shown under Hold Until. When the timer expires, the schedule will resume, and the temperature will return to the setting for the current time period.To cancel the temporary setting at any time, press CANCEL (or SCHED). The program schedule will resume.MORETemporary HoldHold UntilInsideMCR31556
69-2715EF—01 42Overriding schedules permanently1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule.2 Whatever temperature you set will be maintained 24 hours a day until you manually change it or press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule.MOREPermanent HoldInsideMCR31557
43 69-2715EF—01Setting vacation holdUse this function to suspend the program schedule while you are away for an extended period.1 Press s or t to set the temperature.2 Press s or t to set the time of day you want the schedule to resume on the day you return.3 Press HOLD twice. Hold Until appears.4 Press s or t to select the number of days.The selected temperature will be maintained 24 hours a day for the number of days you select. After the selected number of days has elapsed, the previously programmed schedule will resume at the time you set.Note: You can press CANCEL (or SCHED) to resume normal schedule.MOREHold UntilInsideMOREHold UntilDAYSMCR31558
69-2715EF—01 44Setting filter reminder intervalsMCR31559SLEEPFILTER DAYSCHANGE FILTER InsideRESETMOREIf activated during installation, the filter reminder alerts you with a message above the time when it is time to replace your filter.Press RESET after changing the filter, to restart the timer.To change the reminder interval:1 Press MORE, then EDIT.2 Press s or t to select the desired interval (in days), then press DONE.3 Press RESET.4 Press DONE to save and exit.Note: System setting function 0500 governs the filter interval. See “Filter Change Reminder” on page 57.
45 69-2715EF—01Cleaning the screenMOREMCR315601 Press SCREEN to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings.2 After 30 seconds, press DONE to resume normal operation, or press SCREEN again if you require more time for cleaning.Note: Do not spray any liquid directly on the thermostat. Spray liquid onto a cloth, then use the damp cloth to clean the screen. Use water or household glass cleaner. Avoid abrasive cleansers.
69-2715EF—01 46Unregistering thermostatIf you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the message center will scroll UNREGISTERED FROM TOTAL CONNECT for 3 minutes.After that, it will alternate displaying REGISTER AT TOTAL CONNECT, the MAC ID and the MAC CRC.M31572MOREInside
47 69-2715EF—01Disconnecting Wi-FiIf you disconnect the thermostat from your Wi-Fi network (for example, you’re replacing your router):1 Enter system setup (see page 51).2 Change setting 900 to 0 (see page 58).The Message Center will display Wi-Fi DISCONNECTED for 1 minute. After that it will display Wi-Fi SETUP.Re-connect to a Wi-Fi network by following the steps on page 27.M31573MOREInside
69-2715EF—01 48Smart Response TechnologyThis feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set.For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am.Note: System setting function 0530 controls Smart Response Technology. See “Smart Response Technology” on page 57.The message “Recovery” is displayed when the system is activated before a scheduled time period.
49 69-2715EF—01Compressor protectionThis feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage.During the wait time, the message “Wait” is displayed on screen.
69-2715EF—01 50Auto changeoverThis feature is used in climates where both air conditioning and heating are used on the same day.When the system is set to AUTO, the thermostat automatically selects heating or cooling depending on the indoor temperature.Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation.Note: System setting function 0300 controls Auto changeover. See “Manual/Auto Changeover” on page 56.
51 69-2715EF—01Setting functions and optionsYou can change options for a number of system functions. Available functions depend on the type of system you have. The functions, designated with four-digit numbers, along with available options are described on pages 52–58.This thermostat is pre-set for a single-stage heating/cooling system. Setting function 0170 for a heat pump will adjust the default settings.DONE CANCELPM6:30SYSTEMHEATMCR31562DONE0120 20MCR315631 Press SYSTEM. You’ll see several blank buttons on the bottom of the display.2 Press and hold the center blank button until the screen changes (approximately 5 seconds).3 Cycle through the functions, press st next to the four digit number on the left.4 As needed, change options for any function by pressing st next to the number on the right.5 When you have made all changes, press DONE to save and exit.
69-2715EF—01 52System setupHow do I set my thermostat name? (See page 51 for instructions.)Function Settings & Options0112 Device NameThis name will identify the thermostat when you view it remotely.If you register multiple thermostats, give each one a different name.52 = Thermostat 1 Basement 16 Exercise Room 30 Library 44 Porch 2 Bathroom 17 Family Room 31 Living Room 45 Rec Room 3 Bathroom 1 18 Fireplace 32 Lower Level 46 Sewing Room 4 Bathroom 2 19 Foyer 33 Master Bath 47 Spa 5 Bathroom 3 20 Game Room 34 Master Bed 48 Storage Room 6 Bedroom 21 Garage 35 Media Room 49 Studio 7 Bedroom 1 22 Great Room 36 Music Room 50 Sun Room 8 Bedroom 2 23 Guest Room 37 Nursery 51 Theater 9 Bedroom 3 24 Gym 38 Office 52 Thermostat10 Bedroom 4 25 Kid's Room 39 Office 1 53 Upper Level11 Boat House 26 Kitchen 40 Office 2 54 Utility Room12 Bonus Room 27 Kitchen 1 41 Pantry 55 Walk In Closet13 Computer Room 28 Kitchen 2 42 Play Room 56 Wine Cellar14 Den 29 Laundry Room 43 Pool Room 57 Workshop15 Dining Room
53 69-2715EF—01How do I change time and date settings? (See page 51 for instructions.)System setupFunction Settings & Options0120 Year Setting (rst two digits)20 = Year 20xx 21 = Year 21xx0130 Year Setting (last two digits) 01–99 (i.e., 2001–2099)0140 Month Setting 01–12 (i.e., January–December)0150 Date Setting 01–310160 Schedule Options 4 Program schedule is on (7-day programmable).0 Program schedule is off. Thermostat can not be programmed.0165 Restore Schedule Defaults0 Continue using programmed schedule.1 Restore thermostat program to energy saving settings
69-2715EF—01 54System setupFunction Settings & Options0170 Select System TypeIf you are not sure of your heating/cooling system type or have other questions, go to withermostat.com1 Heat/cool: Gas, oil or electric heating with central air conditioning.2 Heat pump: Heat pump without backup or auxiliary heat.4 Heat only with fan: Gas, oil or electric heat without central air conditioning.5 Heat only (no fan): Gas, oil or hot water heat without central air conditioning.6 Cool only: Central air conditioning only.7 Heat pump: Heat pump with backup or auxiliary heating.8 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 2 cooling stages (wires on Y and Y2).9 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 1 cooling stage (wire on Y).10 Heat/Cool Multiple stages: 1 heat stage (wire on W), 2 cooling stages (wires on Y and Y2).How do I set my heating/cooling system type? (See page 51 for instructions.)
55 69-2715EF—01System setupFunction Settings & OptionsNote: Depending on system settings, functions on this page might not appear.0180 Heating Fan Control0 Gas or oil heat: Use this setting if you have a gas or oil heating system (system controls fan operation).1 Electric heat: Use this setting if you have an electric heating system (thermostat controls fan operation).0190 Heat Pump Changeover Valve (for heat pumps only)0 Cooling changeover valve: Use this setting if you connected a wire labeled “O” to the O/B terminal.1 Heating changeover valve: Use this setting if you connected a wire labeled “B” to the O/B terminal.0240 Heating Cycle Rate5 Gas or oil furnace: Standard gas/oil furnace (less than 90% efficiency).9 Electric furnace: Electric heating systems.3 Hot water or high-efficiency furnace: Hot water system or gas furnace (more than 90% efficiency).1 Gas/oil steam or gravity system: Steam or gravity heat systems.0250 Heating Cycle Rate Stage 2How do I customize my heating/cooling system? (See page 51 for instructions.)
69-2715EF—01 56System setupFunction Settings & Options0280 Backlight 0 Backlight off, then on for approximately 8 seconds after keypress.1 Backlight always on low intensity, full bright after keypress.0300 Manual/Auto ChangeoverSee page 50 for more information.0 Manual changeover (Heat/Cool/Off).1 Automatic changeover (Heat/Cool/Auto/Off). Automatically turns on Heat or Cool based on room temperature. Note: System maintains minimum 3°F difference between heat and cool settings.0320 Temperature Format (°F/°C)0 Fahrenheit1 Celsius0330 Automatic Daylight Saving Time Adjustment0 Off1 OnWhat other functions can I change? (See page 51 for instructions.)
57 69-2715EF—01System setupFunction Settings & Options0500 Filter Change ReminderThe reminder appears after selected number of days run time not actual time.0 Off (no reminder)1 Reminder after 10-day run time (about 1 calendar month)2 Reminder after 30-day run time (about 3 calendar months)3 Reminder after 60-day run time (about 6 calendar months)4 Reminder after 90-day run time (about 9 calendar months)5 Reminder after 120-day run time (about 1 calendar year)6 Reminder after 180-day run time (about 18 calendar months)7 Reminder after 270-day run time (about 2 calendar years)8 Reminder after 365-day run time (about 3 calendar years)0530 Smart Response TechnologySee page 48 for more information.1 On0 Off0640 Clock Format 12 12-hour clock (i.e., “3:30 pm”)24 24-hour clock (i.e., “15:30”)What other functions can I change? (See page 51 for instructions.)
69-2715EF—01 58System setupFunction Settings & Options0710 Restore Original Settings0 No1 Disconnects thermostat from Wi-Fi and restores original settings (erases customizations).0890 Wi-Fi On/Off 1 Wi-Fi is on and can be connected to a Wi-Fi network.0 Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network. If you are not connecting the thermostat to a Wi-Fi network this will remove the text “Wi-Fi Setup” from the messaging center.0900 Wi-Fi Connection 1 Connected to Wi-Fi network. This is set automatically when the thermostat is connected to the Wi-Fi network.0 Set to 0 to disconnect from the Wi-Fi network.How do I change my Wi-Fi settings? (See page 51 for instructions.)
59 69-2715EF—01Frequently asked questions:Q Will my thermostat still work if I lose my Wi-Fi connection?:AYes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi.:Q How do I find the password to my router?:AContact the manufacturer of the router or check the router documentation.:Q Why am I not seeing my Wi-Fi setup page?:AYou are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.:Q Why isn’t my thermostat connecting to my Wi-Fi router even though it is very close to the thermostat?:AVerify that the password entered for the Wi-Fi router is correct.
69-2715EF—01 60:Q Where can I find my MAC ID and MAC CRC codes?:AThe MAC ID and MAC CRC will show in the message center of the thermostat. The numbers are also included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC.:Q My thermostat is unable to register to the Total Connect Comfort website.:AVerify that the thermostat is correctly enrolled on your homeWi-Fi network. The message center will display “CONNECTION SUCCESSFUL” or “REGISTER AT TOTAL CONNECT.” You might also see the Wi-Fi Signal strength icon. Verify that the Wi-Fi router has a good internet connection. On your computer, verify that you can open the site at mytotalconnectcomfort.com If you cannot open the site, switch off the internet modem for a few seconds, then power it back on.Frequently asked questions
61 69-2715EF—01Frequently asked questions:Q I registered on the Total Connect Comfort website but was unable to login using my new account.:ACheck your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website.:Q I have signed up on Total Connect Comfort website and have not received a confirmation email.:ACheck for the email in your Junk or Deleted folder.:Q Is there a way to extend the signal strength?:AMost standard routers can be set up to be a repeater. You can also purchase and install a Wi-Fi repeater.For more FAQs, see wifithermostat.com
69-2715EF—01 62If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.Display is blank • Checkcircuitbreakerandresetifnecessary.• Makesurepowerswitchatheatingandcoolingsystemison.• Makesurefurnacedoorisclosedsecurely.• MakesureCwireisconnected(seepage15).Cannot change system setting to Cool• CheckFunction 0170: System Type to make sure it is set to match your heating and cooling equipment (see page 54).Fan does not turn on when heat is required• CheckFunction 0180: Heating Fan Control to make sure it is set to match your heating equipment (see page 55).“Wait” appears on the screen• Compressorprotectionfeatureisengaged.Wait5minutesforthesystemtorestart safely, without damage to the compressor.Troubleshooting
63 69-2715EF—01TroubleshootingHeat pump issues cool air in heat mode, or warm air in cool mode• CheckFunction 0190: Heat Pump Changeover Valve to make sure it is properly configured for your system (see page 55).Button on lower right of screen is blank• Thisbuttonwillremainblankunlessthefurnacefilterchangereminderisactivated (see page 44).Red light is on • IfthermostatisinEmergencyHeatmodetheredlightisnormal.Itshowsthat the thermostat is in emergency heat mode.• IfthermostatisnotinEmergencyHeatmode,contactaqualifiedservicecontractor for repair.
69-2715EF—01 64TroubleshootingHeating or cooling system does not respond• PressSYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature.• PressSYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature.• Checkcircuitbreakerandresetifnecessary.• Makesurepowerswitchatheating&coolingsystemison.• Makesurefurnacedoorisclosedsecurely.• If“Wait”isdisplayed,thecompressorprotectiontimerison.Wait5minutesfor the system to restart safely, without damaging the compressor (see page 48).Heating system is running in cool mode• CheckFunction 0170: System Type to make sure it is set to match your heating and cooling equipment (see page 54).
65 69-2715EF—01 GlossaryC wireThe “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network.Heat Pump heating/cooling systemHeat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump.Conventional heating/cooling systemNon–heat pump type systems; these include air handlers, furnaces or boilers that run on natural gas, oil or electricity. They may or may not include an air conditioner.JumperA small piece of wire that connects two terminals together.MAC ID, MAC CRCAlphanumeric codes that uniquely identify your thermostat.QR Code®Quick response code. A two-dimensional,machine-readable image. Your wireless device can read the black and white pattern in the square and link its browser directly to a web site. QR Code is a registered trademark of DENSO WAVE INCORPORATED.
69-2715EF—01 66Regulatory informationFCC Compliance Statement (Part 15.19) (USA only)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1 This device may not cause harmful interference, and2 This device must accept any interference received, including interference that may cause undesired operation.FCC Warning (Part 15.21) (USA only)Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Interference Statement (Part 15.105 (b)) (USA only)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdifferent from that to which the receiver is connected.• Consultthedealeroranexperiencedradio/TVtechnician for help.
67 69-2715EF—01Regulatory informationThermostatsTo comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.Section 7.1.2 of RSS-GENUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Section 7.1.3 of RSS-GENOperation is subject to the following two conditions:1 this device may not cause interference, and2 this device must accept any interference, including interference that may cause undesired operation of the device.
69-2715EF—01 68 1-year limited warrantyHoneywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).If the product is defective,(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or(ii) call Honeywell Customer Care at 1-855-733-5465. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you.This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.This warranty gives you specific legal rights, and you may have other rights which vary from state to state.If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-855-733-5465. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V4Z9.

Navigation menu