HONGTIANTAI 1648205 Bluetooth Speaker User Manual 3773 JukeboxWizard instructions 5 copy

Hong Tian Tai (H.K.) CO., LTD Bluetooth Speaker 3773 JukeboxWizard instructions 5 copy

User Manual

The Jukebox Wizard is a small speaker device with big sound and connects to your mobile phone or tablet device via Bluetooth®. Charge your Jukebox Wizard with the included USB cable for hours of musical enjoyment anywhere you go. Use your Jukebox Wizard as a speakerphone instead of your phone for clear and convenient group participation.Initially, the battery is not full charged. It needs to be fully charged to power the Jukebox Wizard.1. Put the speaker on a stable surface.2. Plug USB cable to 3.5 DC Jack interface of speaker’s power supply and other end into USB outlet. The power button LED indicator turns RED while charging. Let Jukebox Wizard fully charge 3.5 hours until the LED indicator light turns GREEN. Use the included cable ONLY.• When using your Jukebox Wizard with your mobile phone and a call comes in- the speaker will pause your music and your stereo will emit a ringing tone• The call can be answered by pressing the function button onceRedial the last calling number:1）No music, just press the key twice swiftly to redial the number;2）if you’re playing music, press once to pause the music first, and press twice swiftly to redial.Ring off，press the key once to resume the music playingNOTE: The LED will flash red if no signal is received from your mobile phone after 3 minutes.Amplifier:Input port (data): Bluetooth® 2.4 G wireless digital transmission inputInput port (imitation): Stereo L/R; 3.5mm Stereo Mini PlugOutput power (trends): 2.5W x 2（1 kHz,1% THD）Output power (Maximum instantaneous): 3W x 2（1 kHz, 10% THD）AUX3.5mm Line input impedance：4.7kΩInput sensitivity: 560mVPower supply: Built-in lithium polymer 3.7V 1500mAHCharging: USB interface, charge Current: 750mA, charge time: 3.5 hoursBluetooth®Specification of Bluetooth®： Version 2.1+EDROnline distance of Bluetooth®: Appro.10MType of Speaker: Stereo（ Passive radiation technology）Speaker Unit：4.5cm full-range tapered unit 4Ω 3WFrequency Response：90Hz-20kHzSeparation Degree：≥45 dBINSTRUCTION MANUALSpecificationsBefore you StartHow to Answer a CallHold the function key to cycle the modes between standby and working. No need use the main Power switch on the right. Hold the function key about 5S, the LED indicator on front will go out, and the speak is automatically in standby mode. Continue in the same way to resume the working status.Note: If the system is not used for an extended period of time, the system will enter the battery protection mode to protect the battery power. To resume working status, please turn off the main power switch on the right, and connect to a computer or any other standard USB port to activate it.When storing it for a long time without use, please turn off the main power switch. Then the system can not enter the battery protection mode.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Innovage,LLC. is under license. Other trademarks and trade names are those of their respective owners.Setting up Standby Mode
FUNCTION buttonVolume UPDC USB inPower Button (on/off)Auxiliary AudioLED IndicatorVolume DOWNPower on/off 1. Turn on the Speaker by on/off- switch on lower right. Function key ( Bluetooth® Activation button )- Pairing2. Hold the function key about 5 seconds, the Red/Blue indicator LED on the front will flash. You will also hear a “BEEP” indicating that the Jukebox Wizard is ready for pairing with your device. As the Bluetooth® discovers your device look for the speaker’s name: “Jukebox Wizard”.And pairing with your mobile can begin.(after 10 minutes, if no pairing or AUX not connect with any cable, unit will automatically into STANDBY mode)3. If a password is required for your device, use the password “0000”and choose for connecting “XXXXXX”, After pairing is finished the front LED changes from Red/Blue flashing to only Blue flashingImportant notice： Above is the typical hands-free Bluetooth® pairing instructions, and it may vary with different mobile phone models. For more information, please refer to the user manual or contact the mobile phone’s manufacturers.5. Play music - open the phone’s music player after pairing and connecting. Press the Bluetooth logo function key to pause music during playing music, and press again to resume.Important Notice： Some phones need to manually connect Jukebox Wizard, in this case, you need to manually select the "Play via Bluetooth®*(Because of differences in phone models, please refer to the mobile phone user manual for accessing to music through Jukebox Wizard).4. Function Key (Bluetooth® Activation button) - Previously PairedIf you have previously paired the Jukebox Wizard to your device just hold down the function key until the RED light is “ON”.Your phone or audio device will show you “Bluetooth® connection is successful or ask for permission to accept connection- choose ”yes”.FunctionsHow To OperateThe Jukebox Wizard has a 3.5 mm audio input plug. It can be used with other MP3, iPod, CD players and other audio players to transmit audio signals. Connect your audio player with the required audio cable. At this point the device can be connected to the maximum volume setting, and then use the system to adjust its volume buttons.Note: If the system is set to 80％ volume, a fully charged battery sustainable supply for about 5-7 hours. However, the battery discharge rate is due to the music type and volume setting. Decreasing the volume can greatly extend the battery life.Other Audio SourcesLED states:a) Pairing--- red and blue LED flashes and ‘BEEP’ tone when ready for paringb) Bluetooth® mode---Blue LED flashes slowlyc) AUX mode--- LED only light up in permanent Redd) no signal received---LED flashes red slowlye) ON--- solid redAUXWARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses an can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is not guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu