Hoover F7426 900 User Manual EXTR W/FIX & ROT BRUSH, Manuals And Guides L0520272
HOOVER Power Steamer Manual L0520272 HOOVER Power Steamer Owner's Manual, HOOVER Power Steamer installation guides
User Manual: Hoover F7426-900 F7426-900 HOOVER HOOVER EXTR-W/FIX & ROT BRUSH, - Manuals and Guides View the owners manual for your HOOVER HOOVER EXTR-W/FIX & ROT BRUSH, #F7426900. Home:Vacuums & Floor Care Parts:Hoover Parts:Hoover HOOVER EXTR-W/FIX & ROT BRUSH, Manual
Open the PDF directly: View PDF 
.
Page Count: 17
| Download | |
| Open PDF In Browser | View PDF |
HOOVER
/
/
/
\
TM
m
Deep
m
!
Cleaner
AF'mB
with
The Easy to Use Deep
SteamVac
applying
www.hoover.com
V2 TM Deep
hot tap water
TM
_mmi
m
Auto
Cleaner
RinseMFeature
ENGLISH ,._ pp. 1-17
ESPANOL ,._ pag. 18-27
FRAN(_AIS ,._ p. 28-37
Cleaner
cleans
carpet
and cleaning
solution.
fibers
by
Grounding
Instructions
When using
the following:
an electrical
READ
ALL
appliance,
always
INSTRUCTIONS
foIIow
BEFORE
basic
precautions,
USING
APPLIANCE.
including
A
B
@
@
To reduce
the risk
shock,
or injury:
•
Use
indoors
of fire,
electric
only.
• Use only
the cleaning
product.
on surfaces
moistened
by
process.
Do not immerse
• Connect
outlet only.
Instructions',
to a properBy
grounded
See "Grounding
• Do not
outlets.
clean
•
use without
Do not
• Do not flit
(60°).
over
with
floor
water
tanks
electrical
in place.
above
140°F
• Use extra care when cleaning
stairs. Do not place deep cleaner
stairs.
on
on
• Use deep cleaner
only for its
intended
use as described
in the
instructions.
• The use of an extension
cord is not
recommended,
if an extension
cord is
absolutely
necessary,
use at least a
16 gauge
3-wire cord which
has a 3prong grounding
type plug and a 3=
pole receptacle
that accepts
the
machine
plug,
• Unplug
ered hand
before
tool
when not
before
connecting
• Do not
pets.
point
tools
toward
people
or
• Use only commercially
available
Hoover SteamVac
TM
cleaners
intended
for machine
application.
Do not use
any type of wax with deep cleaner.
cleaners
• Do not use to pick up flammable
or
combustibme
Hquids such as gasoline
or use in areas where they may be
present.
• Do not pick up chlorine
bleach,
drain cleaner,
gasoline
or any other
toxic material
with this appliance.
C
This appliance must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce the
risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor (C) and
grounding plug (A). The plug must be
plugged into an appropriate outlet (B)
that is properly installed and grounded
in accordance with all local codes and
ordinances.
DANGERImproper connection of the equipmentgrounding conductor can result in the
risk of electric shock. Check with a qualified electrician or service person if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
plug provided with the appliance - if it
will not fit the outlet, have a proper outlet
installed by a qualified electrician. This
appliance is for use on a nominal 120
volt circuit and has a grounding plug
that looks like the plug illustrated in
sketch (A).
• Do not pick up anything that is
burning or smoking, such as cigarettes, matches, or hot ashes.
in
• Avoid picking
up hard, sharp
objects
with the deep cleaner.
They
may damage
the machine.
the pow-
• Always disconnect
cord from electrical outlet before servicing the deep
cleaner.
• Do not unplug by pulling on cord.
To unplug, grasp the plug, not the
cord.
• Never handle plug or appliance
with wet hands.
• Do not pull or carry by cord, use
cord as a handle,
close door on cord
or pull cord around
sharp edges or
corners.
Do not run appmiance
over
cord. Keep cord away from heated
surfaces,
Save
• Close supervision
is necessary
when any appliance
is used by or
near children.
Do not allow deep
cleaner
to be used as a toy or to run
unattended
at any time.
• Keep detergents
and other
out of children's
reach.
• Use only attachments
recommended by The Hoover
Company;
others
may cause hazards.
• Unplug
deep cleaner
use. Turn off all controls
unplugging.
• Do not use with damaged
cord or
plug. [f appliance
is not working
as it
should,
has been dropped,
damaged,
[eft outdoors,
or dropped
into water,
take it to a Hoover
Factory
Service
Center or Authorized
Hoover Warranty
Service
Dealer,
these
• Keep hair, loose clothing,
fingers,
feet and all parts of body away from
openings
and moving
parts.
• Do not put any object into openings. Do not use with any opening
bmocked; keep free of dust, mint, hair,
and anything
that may reduce
air flow.
• To help prevent
matting
and resoiIing, avoid contact
with carpets
until
they are dry, Keep children
and pets
away from carpets
until they are completely
dry.
• Store
machine
in a dry place. Do not expose
to freezing
temperatures.
instructions!
A temporary adapter (D) may be used to
connect this plug to a 2-pole receptacle
(E) if a properly grounded outlet is not
available. The temporary adapter should
be used only until a properly grounded
outlet (B) can be installed by a qualified
electrician. The green colored rigid ear,
lug, or the like (F) extending from the
adapter must be connected to a permanent ground (G) such as a properly
grounded outlet box cover. Whenever
the adapter is used, it must be held in
place by a metal screw. NOTE: In
Canada, the use of a temporary adapter
is not permitted by the Canadian
Electrical Code.
Thank
you
for
choosing
a HOOVER
Contents
product.
Important
safeguards
..........
2
Parts needed
for assembly .......
3
Assembling
deep cleaner
......
3-5
Deep cleaner
description
........
6
General
operation
............
6-8
Filling
the clean water tank ... 7-8
Emptying
the recovery
tank ....
8
Brush speed selector
.........
7
Automatic
shut-off
............
7
How to use
If you need any assistance:
Visit our website at www.hoover.com. Click on the "Service" button to find
the service outlet nearest you OR
Call 1-800-944-9200 for an automated referral of service outlet locations (U.S.
only) OR
Call 1-330-499-9499 to speak with a representative in our Consumer
Response Center.
PLEASE
Fill
DO NOT
in and
RETURN
PRODUCT
TO THE
STORE.
Before you begin
............
9
After cleaning
.............
9-10
Cleaning
carpet
.............
10
Cleaning
bare floors
.........
11
Using the tools
..........
11-14
Cleaning
carpeted
stairs .....
14
Cleaning
upholstery
.......
14
If you have a problem
.........
16
Lubrication
..................
16
Service
.....................
16
Save
Please enter the COMPLETE
and save.
The model
handle.
THIS
and serial
model and serial numbers
numbers
are located
on the data
in the spaces provided
label on the back
of the
Model No.
Serial No.
Storage
Warranty
Hint: Attach
your sales
Verification
of date
Hoover
product.
Parts
receipt
of purchase
to this owner's
may
16
17
manual.
be required
for warranty
service
of your
®
needed
© 2002 The Hoover Company
www.hoover.com
for assembly
Accessories
C
- vary
by model
D
H
...................................................
.....................
....................
I
J
a
A
A.
B.
C.
D.
Deep cleaner
Upper handle
Handle bolts and nuts
Hose/cord
hook
E.
F.
Hose/tool
Hose
G. Utility
tool
caddy
Not all accessories
model.
(in bag with
are included
with every
hose)
H.
I.
J.
K.
Carpet/Upholstery
Bare Floor Cleaner
Pre-cleaner
Bare floor tool
Detergent
L. SpinScrub
TM hand
tool
M. Stair/upholstery
nozzle
N. Crevice
tool
Accessories
purchased
the center
not included
with your model may be
separately
using the order form located
of this manual.
at
The assembled
drawing.
= 1
cleaner will look like this
Aj
Attach
upper
handle
Remove clean water tank (upper tank)
from deep cleaner.
_--
NOTE: If the cord protector (A) on back
of handle should become dislodged
during unpacking, make sure it is repositioned properly before continuing
with assembly of your deep cleaner.
With the arrow (B) on the cord )rotector
pointing down, press groove (C) in the
cord protector into slot in the lower
handle.
!
With cord hook (D) to back of deep cleaner,
push upper handle down onto lower
handle.
Push bolts into holes on front of handle. If
bolts will not go through hole easily, handle is not pushed completely down.
Place nuts in recessed areas on back
of the handle. Hold each nut in place
while tightening each bolt securely (from
the front of the handle) with a Phillips
screw driver.
Replace clean water tank (upper tank)
by positioning bottom first. Press tank
into place.
Only two nuts are needed on this model.
The extra nut is not required but has
been provided for your convenience.
Attach
hose/tool
caddy
The hose/tool caddy is designed to be
used either on the cleaner for easy
access to the tools and hose, or if the
tools are not going to be used, it can be
removed and hung for storage.
If you do not want to attach the caddy to
the cleaner at this time, proceed to Fig.
1-10 for proper hose placement on the
caddy.
Attach
hook
hose/cord
Insert tabs on hook into slots on back of
cleaner. Snap hook onto cleaner.
4
Slide tabs (E) on caddy into slots (F) on
back of cleaner.
;m.:]
IEil
Rotate top of caddy toward cleaner
handle. Slide caddy down so notch (G)
on caddy rests in hook (H) on cleaner.
Identify the hose parts before storing
hose.
I. Nozzle connector end
J. Solution tube
Storing
tools
hose
and
Press hose, a few inches from nozzle
connector end (I), into caddy. Bring
hose up and over top of caddy.
/ ,X
71-
I
Press hose into opposite side of caddy.
Loop hose at bottom of cleaner and
press into top of hook (K).
Loop
Slide
Snap
hose
,
hose over top of caddy again.
hose clip (L) toward end of hose.
tab (M) on hose connector into
clip.
Repeat on other end of hose.
Press solution tube (J) into opposite side
of clip.
iil;;1
/
Snap stair/upholstery
caddy.
nozzle onto
Insert top of bare floor tool through
"loop" on caddy. Slide tool down into
place.
SpinScrub
TM
hand
tool
The SpinScrub TM hand tool is shipped in
a plastic bag for protection. To remove
the bag before using the tool, open tool
door.
Continued
._
5
EE[_]
J
Pull tool down and outward.
To reposition the tool, reverse this procedure.
How to reattach
cover
tool
The tool cover is designed with a breakaway feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.
Snap door into place.
Deep
Cleaner
Description
The assembled
1.
2.
3.!
6--
8_
10-..
11_
16x
15_
14
I
12
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
deep cleaner will look like the drawing.
Hand grip
Solution trigger: press to release cleaning
solution
ON/OFF switch
Rinse Setting switch
SpinScrub TM hand tool
Carrying handle
Clean water tank handle
Clean water tank
Detergent container
Recovery tank handle
Recovery tank: holds dirty solution
Recovery tank latches
Brush setting selector
Solution tube connection port
Nozzle
Hose connection port
Cord hook: rotates for quick cord release
Hose
Hose/tool caddy
Stair/upholstery nozzle
Bare floor tool
Cord/hose hook
Handle release pedal
13
This deep
use.
cleaner
is intended
Operate
deep cleaner
on data plate on back
cleaner
into a properly
ON/OFF
switch
To turn cleaner ON, push switch down.
To turn cleaner OFF, push switch up.
Handle
release
for household
only at voltage
specified
of cleaner.
Plug deep
grounded
outlet.
pedal
Step on pedal (A) to lower handle to
operating position. Handle does not lock
into a single position but "floats" to allow
convenient operation.
To transport
To move your deep cleaner from room to
room, put handle in upright and locked
position, tilt deep cleaner back on
wheels and push forward.
Continued
-P
7
Carrying
handle
The deep cleaner may also be lifted by
placing a hand above the upper clean
solution tank handle as shown.
Automatic
shut
off
Brush setting
selector
When the recovery tank (lower tank) is full
the automatic shutoff mechanism will shut
off the deep cleaner suction (suction will
be noticeably reduced).
Your 'SteamVac' deep cleaner has two
agitator brush settings.
At that time, the yellow float disk will rise
to the top of the recovery tank lid (B).
The deep cleaner will no longer pick up
dirty solution and the motor sound will
become noticeably higher in pitch.
OFF - for cleaning carpets and bare
floors when brushing is not desired.
Slide selector button to the desired setting before cleaning.
ON - for cleaning of carpet and bare
floors
When this happens, turn deep cleaner
off and empty recovery tank before
continuing use.
Check clean water tank also; it may
need to be refilled.
Do not use without float and float
retainer in place. If broken or dislodged, take to an Authorized Hoover
Service Center or Dealer for repair.
Rinse
Setting
switch
The tanks
Use this switch to select a wash with
rinse setting or a rinse only setting.
WASH-AutoRinse
- This setting cleans
your carpet with detergent and water on
the forward stroke. On the reverse
stroke, a water-only rinse is applied
automatically.
The clean water tank (C) holds the water
that will either be mixed with detergent
for cleaning the carpet or floor, or used
to rinse the carpet or floor.
RINSE - This setting applies water-only
rinse in both the forward and reverse
strokes.
See "How to clean" section for more
details.
(upper
water
How
Clean
tank
tank)
The detergent container (D) is permanently attached to the water tank. It
holds the detergent that mixes with the
water.
to fill
Unplug deep cleaner from electrical
outlet.
Place deep cleaner handle in the
upright, locked position.
To remove tank, press down on tank
handle and pull forward.
P-,5P4
P_EI
IE
Carry tank to a sink.
Turn tank cap counterclockwise
remove cap.
and
Fill tank (E) (1 gallon) with hot tap water.
CAUTION: Do not fill with water above
140°F (60°C).
To fill detergent container (F), turn cap
counterclockwise and remove cap.
Replace tank cap and tighten.
NOTE: Use only HOOVER
detergents.
They are specially
formulated
for use
with your 'SteamVac'
deep cleaner.
CAUTION:
Detergents
Anionic and Nonionic
contain
Surfactants.
Avoid contact with eyes and skin. In
case of contact with eyes, flush with
cold water for 15 minutes.
In case of
contact with skin, wash with water,
irritation
persists,
call a physician.
For Medical Information
(U.S.) call
1-800-752-7869.
if
Position bottom of tank onto cleaner and
pivot tank to snap it into place.
Fill container (16 oz.) with HOOVER
Carpet/Upholstery
Detergent or
HOOVER Bare Floor Cleaner.
Do not use Bare Floor Cleaner on carpet or
upholstery. Do not use any type of wax
with your 'SteamVac' deep cleaner.
To assure proper results, use only
HOOVER detergent.
Replace container cap and tighten.
Recovery
(lower
tank
tank)
The recovery tank holds tile dirty solution that is picked up from the surface
being cleaned.
When the recovery tank is full, the automatic shut-off will engage, suction will
stop (see page 7), and the tank must be
emptied.
How
to empty
Turn deep cleaner off and unplug
from electrical outlet.
To prevent possible leaking, remove
clean water tank (Fig. 2-10) by pressing
down on tank handle and pulling forward; set tank aside (do not set tank
on furniture).
Turn recovery tank latches (G) outward
(one on each side of tank).
Step on handle release pedal (Fig. 2-3)
and lower handle until it rests on the
floor.
Carry tank to sink or drain.
Raise handle (H) straight up and lift tank
off cleaner.
Lower handle toward back of tank to
unlock lid. Lift lid off tank.
Empty tank and reposition lid.
For full suction, it is important that
the recovery tank lid is properly
secured before cleaning.
Raise tank handle to carrying position
and place it onto deep cleaner. Lower
handle to front of tank.
Turn latches (one on each side of tank)
inward to lock tank in place.
Raise handle of deep cleaner to upright
position and reposition upper clean
water tank.
Continued
._
9
Before
you begin
a. Vacuum thoroughly
° For carpet,
use a HOOVER vacuum cleaner with an
agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool
to reach into tufts and folds. Do not use
the 'SteamVac' deep cleaner as a dry
vacuum cleaner,
b. For upholstery, check cleaning
code = Use your HOOVER 'SteamVac'
deep cleaner only if the upholstery
fabric is marked with a "W" (for "wet"
clean) or "S/W" (for "solvent/dry" or
"wet" clean), Do not clean fabric
marked "S" ("somventldry" clean
onmy). If your upholstery does not have
a code, seek professional assistance.
c. Test for colorfastness - Wet a white
absorbent cloth with the detergent. In a
small, hidden area, gently rub the surface
with the dampened cloth. Wait ten minutes
and check for color removal or bleed with
white paper towel or cloth. If surface has
more than one color, check all colors.
After
d. When cleaning entire floor, move
furniture out of area to be cleaned
(may not be necessary if only high traffic areas are to be cleaned). For furniture too heavy to move, place aluminum
foil or wax paper under legs. This will
prevent wood finishes from staining carpet. Pin up furniture skirts and
draperies.
f. To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray.
g. To avoid wetting and possible damage
to wood floors underneath area rugs/carpet, either move area rugs/carpet to a nonwood bare floor surface or place waterproof
material (e.g. plastic) underneath them
before cleaning.
e. Pretreat spots and heavy traffic
areas with HOOVER® PreCleaner*Test PreCleaner for colorfastness by first
spraying it on a hidden area; wait ten
minutes and blot with white paper
towels or cloth.
If no color change is visible, spray
PreCleaner onto spots and traffic areas.
Wait at least ten minutes. Use your
'SteamVac' deep cleaner to pick up
PreCleaner and spot. Repeat until spot is
removed; carefully scrub with a household
scrub brush if necessary.
See pages 10-14 for instructions on various
cleaning tasks.
*Available at additional cost.
Do not saturate carpet or upholstery with
PreCleaner.
No cleaning solution removes all stains
from all carpets. Stain removal varies with
the type of spill, time elapsed before
removal, carpet material, and carpet type.
cleaning
a. Allow carpet or upholstery to dry. To
help prevent matting and resoiling the
carpet, keep children and pets away
from surface until it is completely dry. If
it is necessary to walk on damp carpet, place towels or white cloths on the
traffic areas.
If furniture must be replaced before the
carpet is dry, place plastic or aluminum
foil under legs of furniture so metal
slides or wood finishes will not stain the
carpet.
b. Empty tanks, rinse with clear water
and let air dry. Rinse the recovery tank
lid and let air dry.
Any unused detergent may be left in
the detergent container for future use.
c. Remove lint from filter screen located
inside recovery tank.
d. Remove lint from filter screen located
on bottom of cleaner as follows.
Note: When brushes seem to be rotating slowly, disconnect deep cleaner
from electical outlet and check and
clean this screen.
Remove both tanks as described in Fig.
2-16. Tilt cleaner back so handle rests
on floor.
Squeeze filter frame, lift and pull it out.
Wipe off screen and push frame back
into place.
Return cleaner to upright position.
e. If desired, vacuum thoroughly after
carpet has completely dried. This will
help reduce any shading left by the
deep cleaner's brushes.
10
To clean
nozzle
If lint or other debris becomes lodged in
nozzle, it can be removed for cleaning.
J
To replace nozzle, line up tabs (A) on
nozzle with holes (B) in cleaner. Slide
tabs into holes.
Unplug deep cleaner from electrical
outlet.
Slide nozzle completely onto cleaner.
Press down on nozzle to secure it.
Remove both tanks as described in Fig.
2-16. With handle in upright position, tilt
cleaner back so that handle rests on the
floor.
Replace recovery tank (Fig. 2-17).
The nozzle must be in the proper
position in order for the recovery
to go on properly.
Lift up rear edge of nozzle. Slide nozzle
up and remove from cleaner.
Raise cleaner to upright position and
replace clean water tank (Fig. 2-15).
Read "Before you begin cleaning"
instructions
on page 9.
1. Fill clean water tank according to
instructions for Figs. 2-9 to 2-12.
2. Fill detergent container with HOOVER
Carpet/Upholstery
Detergent according
to instructions for Figs. 2-13 to 2-15.
3. Turn brushes ON or OFF as desired.
4. Dry hands and plug cord into a properly grounded outlet.
Do not clean over floor electrical outlets.
5. To avoid
start at the
the door or
be emptied
walking on damp carpet,
end of the room farthest from
path to sink where tanks will
and filled.
tank
you (second wet stroke). The deep
cleaner rinses the carpet on the backward pass. Note: To assure proper
rinsing, it is important to keep the
deep cleaner on the same path backward as forward.
9. Release trigger and slowly push deep
cleaner forward over area just sprayed
with solution (dry stroke). Then slowly
pull deep cleaner back toward you without squeezing trigger (dry stroke).
Continue using dry strokes until little
water is visible passing through the
recovery tank lid.
WASH
RINSE
11. If you would like to rinse the carpet
with water only, set Rinse Setting switch
to RINSE (Fig. 3-8). Repeat steps 7-9. In
this setting, rinsing will be done on both
forward and reverse strokes.
Rinsing is not necessary, but will help
remove detergent residue and help your
carpet look fresher.
12. For heavily soiled areas, repeat
steps 6-9. Avoid saturating carpet, as
noted below.
Step on handle release pedal and lower
handle to operating position.
6. Set Rinse Setting switch to WASHAutoRinse. Turn cleaner ON (Fig. 3-5).
Note: To avoid saturating
not use more than 4 wet
10. For best results, use straight, parallel strokes as shown in the diagram
below. Overlap strokes by 1 inch to help
prevent streaking.
Keep nozzle flat on floor for both forward and reverse strokes.
one area.
strokes.
Always
carpet,
strokes
end with
It is best to alternate
as described
above.
do
over
dry
wet and dry strokes
For best cleaning results and to
faster drying of carpet, end with
dry strokes. (Continue using dry
until little water is visible passing
the recovery tank lid.)
aid in
more
strokes
through
13. Empty recovery tank when the
motor sound becomes higher pitched
and there is a loss in suction (see
"Automatic shut-off", Fig. 2-6).
7. Squeeze trigger to release cleaning
solution and slowly push deep cleaner
forward (equals one wet stroke).
When finished cleaning, follow "After
cleaning" instructions on pages 9 &10.
8. Continue to squeeze trigger and
slowly pull deep cleaner back toward
Continued
-P
11
6. Set Rinse Setting switch to WASHAutoRinse. Turn cleaner ON.
How to attach
attachment
bare
7. To release solution, press trigger.
Slowly move deep cleaner forward and
backward over area to be cleaned.
Water and detergent will be released on
the forward stroke. A water-only rinse will
automatically be released on the reverse
stroke.
floor
Unplug deep cleaner from electrical
outlet.
To prevent possible leaking, remove
clean water tank (Fig. 2-10) and recovery tank (Fig. 2-16) before positioning
bare floor attachment.
Set tanks aside (do not set tank on furniture).
1. With handle in upright position, tilt
cleaner back so that handle rests on the
floor.
3. Push attachment against nozzle while
rotating attachment downward until both
ends snap into place.
(Note: Some force may be required to
rotate and snap attachment into place.)
4. Return deep cleaner to upright position. Lower handle and replace recovery
tank.
9. If rinsing the floor is desired, set Rinse
Setting switch to RINSE. Repeat steps 7
& 8. This setting provides a water-only
rins in both the forward and reverse
strokes.
floor
Rinsing is not necessary, but will help
remove detergent residue from the floor.
10. Empty recovery tank when the
motor sound becomes higher pitched
and there is a loss in suction (see
"Automatic shut-off", Fig. 2-6).
Read "Before you begin cleaning"
instructions on page 9.
11. When finished cleaning, follow "After
cleaning" instructions on pages 9 & 10.
Do not use the deep cleaner
wood floors.
Unplug deep cleaner from electrical
outlet and remove attachment from nozzle. Rinse it in clear water. Do not
remove plastic screen or foam from
attachment.
5. Raise handle to upright position and
reposition clean water tank.
To clean
2. With foam strip (C) (located under the
netting) in position as shown, place
attachment on front of nozzle (D).
Make sure arrow on end of attachment
points in the direction as shown.
8. To pick up dirty solution, release trigger and slowly move deep cleaner over
area where solution has just been dispersed. Use both forward and reverse
strokes.
on hard-
1. Fill clean water tank according to
instructions for Figs. 2-9 to 2-15.
2. Fill detergent container with HOOVER
Bare Floor Cleaner according to instructions for Figs. 2-13 to 2-15.
3. Turn brushes ON for scrubbing
OFF if scrubbing is not desired.
or
4. Dry hands and plug deep cleaner
into a properly grounded outlet.
5. Step on handle release pedal and
lower handle to operating position.
Attach
hose
Unplug cleaner from electrical outlet.
Insert short hose end, matching tabs on
hose with same-sized slots in port.
Open hose connection
12
port (E).
Plug solution tube firmly into solution
connection port (F).
Select
tool
Your model includes some combination
of the following tools, but may not
include them all.
How
to attach
tools
/
[_5E5
After
using
tool
Drain suction hose by turning deep
cleaner ON and holding nozzle up for
several minutes. Do not press trigger.
Unplug deep cleaner from electrical
outlet.
Disconnect hose and solution tube
from deep cleaner,
Unplug deep cleaner from electrical
outlet.
G. SpinScrub TM hand tool has rotating
brushes for extra scrubbing action on
small carpet areas, carpeted stairs and
upholstery.
H. Stair/upholstery nozzle has a built-in
brush to help provide the scrubbing
action some spots may need for
removal.
I. Crevice tool can be used to clean
along edges of carpet, carpeted stairs
and on upholstery.
1. Place handle in upright position and
remove hose from rack.
All tools attach to the hose in the same
manner:
2. Connect tool to hose by sliding it onto
connector until the tab (J) locks it
securely.
Using your thumb, push forward and
up on the latch (K) to remove tool.
Drain solution tube by placing round
end in sink and raising nozzle above
your head. Press the trigger.
Read "Before you begin cleaning"
instructions
on page 10.
1. Attach hose and solution tube as
instructed in Figs. 3-11 to 3-13.
2. Place handle in upright position.
Agitator brushes will not rotate while
handle is in upright position.
The tool caddy can be removed and
hung on a coat hanger for storage.
3. Fill clean water tank according to
instructions for Figs. 2-9 to 2-12.
4. Fill detergent container with HOOVER
Carpet/Upholstery
Detergent according
to instructions for Figs 2-13 to 2-15.
5. Attach tool to end of hose.
6. Hose length may require that
machine be placed at the top of the
stairs to clean upper half of stairway
and at bottom of stairs to clean lower
half.
9. Pre-spray the carpeted stair by holding the tool (A) or (B) about one inch
above the carpet and push it forward
while pressing the trigger (equals one
wet stroke).
10. Position tool against the riser and slightly
press it into carpet pile. Press the trigger
and pull the tool slowly over the carpet
(second wet stroke). Release trigger at end
of stroke.
To prevent machine from falling, use
extra caution when cleaning on stairs.
Do not place deep cleaner on stairs.
Do not point tools toward people or
pets.
7. Dry hands and plug deep cleaner
into a properly grounded outlet.
8. Set Rinse Setting switch to WASHAutoRinse. Turn cleaner ON.
Note: "Auto-rinse" and rinse are not
available during tool use. The hose will
only dispense water mixed with detergent.
Continued
-P
13
lmnmnn
A
B
11. Lift tool, and position it against riser.
Pull tool slowly over carpet without
pressing trigger (dry stroke).
12. Overlap strokes by 1/2 inch to help
prevent streaking.
It is best to alternate wet and dry
strokes as described above. End with
more dry strokes to aid in faster drying
of carpet.
To avoid saturating carpet, do not use
more than 4 wet strokes over any one
area. Always end with dry strokes.
If additional cleaning is necessary, wait
until the carpet is completely dry before
using the tool again.
13. Empty recovery tank when the motor
sound becomes higher pitched and
there is a loss in suction (see "Automatic
shut-off", Fig. 2-6).
When finished cleaning, follow "After
cleaning" instructions on pages 10 & 11
and "After using tool" instructions on
page 13.
Read "Before you begin cleaning"
instructions
on page 10.
Be sure to check the cleaning code on
your upholstery. Use your deep cleaner
only on upholstery marked "W" or
"W/S".
1. Attach hose and solution tube as
instructed in Figs. 3-11 to 3-13.
2. Place handle in upright position.
Agitator brushes will not rotate while
handle is in upright position.
3. Fill clean water tank according to
instructions for Figs. 2-9 to 2-12.
4. Fill detergent container with HOOVER
Carpet/Upholstery
Detergent according
to instructions for Figs. 2-13 to 2-15.
5. Attach tool to end of hose.
Do not point tools toward people or
pets.
6. Dry hands and plug deep cleaner
into a properly grounded outlet.
7. Set Rinse Setting switch to WASHAutoRinse. Turn cleaner ON.
Note: "Auto-rinse" and rinse are not
available during tool use. The hose will
only dispense water mixed with detergent.
Removable
8. Gently press the tool onto the fabric.
Press the trigger and slowly pull the nozzle over the fabric.
9. Overlap strokes by 1/2 inch to help
prevent streaking.
Make additional strokes without pressing
the trigger to remove more moisture.
10. To clean in corners or creases, lift
the tool one-half inch from the fabric and
press the solution trigger.
11. Vacuum up the solution with the tool
without pressing the trigger.
12. For heavily soiled areas, it may be
necessary to repeat the cleaning
process. Make crisscrossing strokes to
the original pattern; overlap each pass
(Fig. 3-21 ).
brushes
Your deep cleaner is equipped with
removable brushes for easy cleaning.
To remove
brushes
Disconnect cleaner from electrical
outlet.
Make no more than 2 passes with the
solution or rinse over any one area to
prevent over-wetting and damage to
fabric.
To prevent possible leaking, remove
clean water tank and recovery tank. Set
tanks aside.
If additional cleaning is necessary, wait
until the upholstery is completely dry
before using the tool again.
13. Empty recovery tank when the motor
sound becomes higher pitched and
there is a loss in suction (see "Automatic
shut-off", Fig. 2-6).
When finished cleaning, follow "After
cleaning" instructions on pages 10 & 11
and "After using tool" instructions on
page 13.
14
With handle in upright position, tilt
cleaner back until handle rests on the
floor.
Grab brush assembly and pull firmly.
The brushes can be cleaned under running water.
B
D
B
Storage
Before storing:
• Empty clean water tank and let air
dry Replace on deep cleaner
• Unused detergent can be stored in
the detergent container
• Empty recovery tank, rinse tank
and lid thoroughly with clean water
and let air dry
To replace
brushes
Align posts (A) on both ends of brush
assembly with slots (B) in cleaner housing
Make sure that the square post (C) also
aligns with the square hole (D) Turn
brushes slightly until post fits easily into
hole
Press brush assembly firmly to snap into
place
If a minor problem occurs, it usually can
be solved quite easily when the cause is
found by using the check list below
Possible cause
Possible solution
• Not firmly plugged in
• Plug unit in firmly
• No voltage in wall receptacle
• Check fuse or breaker
Allow brushes and underside of deep
cleaner to air dry thoroughly
before
storing deep cleaner on a carpeted or
wood surface.
Do not store deep cleaner
clean water tank in place.
with
a full
Lubrication
The motor is equipped with bearings
which contain sufficient lubrication for
the life of the motor The addition of
lubricant could cause damage Do not
add lubricant to motor bearings.
Possible
Possible
cause
solution
• Clean water tank not firmly in place
• Make sure tank is securely locked in
position
• Clean water tank or detergent
container empty
• Refill container according to instructions for surface being cleaned
• Recovery tank lid not on
correctly
• Make sure lid is firmly in place
3 Align slots (B) on cap with tabs (C) in
opening
Turn cap clockwise to tighten
• Blown fuse/tripped
breaker
• Replace fuse/reset breaker
Possible
Possible
Possible cause
Possible solution
Possible
Possible
cause
solution
• Recovery tank full/automatic
shut
off engaged
• Remove and empty recovery tank
• Blockage in tool on end of hose
• Remove tool and clear blockage
• Valve cap clogged
• Remove and clean valve cap (see following instructions)
cause
solution
• Dirty filter screen on bottom of unit
• Clean screen as shown in Fig. 3-2
• Setting selector on OFF
• Move setting selector to ON
1 Remove clean water tank
A
• Recovery tank lid not on correctly
• Make sure lid is on securely
• Water tank empty, but detergent
remains
• Fill water tank
2 Turn valve cap (A) counterclockwise
and remove
Soak valve cap in warm water for at
least 15 minutes Wipe cap dry
Continued
-P
15
To obtain approved HOOVER service
and genuine HOOVER parts, locate the
nearest Hoover Factory Service
Center or Authorized
Hoover
Warranty Service Dealer (Depot) by:
.checking the Service section of The
Hoover Company on-line at
www.hoover.com
OR
. checking the list of Factory Service
Centers provided with this cleaner
OR
checking the Yellow Pages under
'Vacuum Cleaners - Household" OR
calling 1o800o944o9200 for an
automated referral of authorized
service outlet locations (U.S. only).
Do not send your cleaner to The Hoover
Company in North Canton for service,
this will only result in delay.
If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone: 330-499-9499.
In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
Phone: 1-800-263-6376.
Always identify your cleaner by the
¢ompmete model number when requesting information or ordering parts. (The
model number appears on the bottom of
the cleaner.)
In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
1-800-263-6376,
Fuim One Year
Warranty
(Cleaner)
Two Year Warranty
(Domestic
Use)
Your HOOVER(R_appliance is warranted
in normal household use, in accordance
with the Owner's Manual against odginal
defects in material and workmanship for
a period of one full year from date of purchase. The motor to your HOOVER
appliance is warranted in normal household use, in accordance with the
Owner's Manual, against odginal defects
in material and workmanship for a period
of two years from date of purchase of the
appliance. This warranty provides, at no
cost to you, all labor and parts to place
this appliance or the motor to this appliance in correct operating condition during the respective warranted periods.
These warranties apply when the appliance is purchased in the United States
including its territories and possessions,
or in Canada or from a U. S. Military
Exchange. Appliances, including their
motors, that are purchased elsewhere
are covered by a limited one year warranty which covers the cost of parts only.
These warranties do not apply if the
appliance is used in a commercial or
rental application.
Warranty service can only be obtained
by presenting the appliance to one of
the following authorized warranty service
outlets. Proof of purchase will be
required before service is rendered.
1. Hoover Factory Service Centers.
2, Hoover Authorized Warranty
Service Dealers (Depots).
For an automated referral of authoo
rized service outlets in the U.S.A.,
phone 1o800o944o9200 OR
visit "The Hoover
Company
on4ine
at
www.hoover.com
This warranty does not cover pick up
delivery, or house calls; however, if you
mail your appliance to a Hoover Factory
Service Center for warranty service,
transportation will be paid one way,
While this warranty gives you specific
legal rights, you may also have other
rights which vary from state to state,
If further assistance is needed, or if
there are questions concerning this warranty or the availability of warranty service outlets, write or phone the
Consumer Response Center, The
Hoover Company, 101 East Maple St.,
North Canton, Ohio 44720,
Phone 1-330-499-9499,
I6
HOOVER y _)son
HOOVER and _
1-03 F7426-900
HOOVER et _sont
marcas registradas
des marques d6posees
are registered trademarks
Litho USA
56518-163
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 17 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Wed Apr 04 21:50:28 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools