Hoover H3030 User Manual Manuals And Guides L0502277

HOOVER Power Steamer Manual L0502277 HOOVER Power Steamer Owner's Manual, HOOVER Power Steamer installation guides

User Manual: Hoover H3030 H3030 HOOVER HOOVER - Manuals and Guides View the owners manual for your HOOVER HOOVER #H3030. Home:Vacuums & Floor Care Parts:Hoover Parts:Hoover HOOVER Manual

Open the PDF directly: View PDF .
Page Count: 19

Download
Open PDF In Browser	View PDF

HOOVER
FloorMate

SpinScrub TM 500
Hard Floor Cleaner

www.hoover.com

Grounding
Instructions
When using an electrical appliance, always follow basic precautions,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING APPLIANCE.

WARNING:
To reduce the risk of fire. electric
shock, or injury:
• Use indoors
only.
• Use only on surfaces
by the cleaning
process
spills. Do not immerse

moistened
or small
product.

- Do not clean
outlets.

• For use on bare floors or sealed
wood floors. NOT for use on
carpets,
• Always
install
float
_vet pick up operation,

before

• Connect to a Eroperlygrounded
outlet only. See 'Grounding
Instructions'.
over

floor

- Do not use without
place.

any

• Use extra care when cleaning
stairs. Do not place cleaner
on
stairs.

• Close supervision
is necessary
when any appliance
is used by or
aear children.
Do not allow cleaner
to be used as a toy or to run unattended
at any time.
• Keep hair, loose clothing,
fingers,
feet and all parts of body away from
openings
and moving
parts.
, Do not pick up anything
that is
burning
or smoking,
such as cigarettes, matches,
or l_ot ashes.
• Do not pick up or use flammable
or combustible
materials
such as
gasoline
or fine wood sandings
or
use in areas where they may fie present.

electrical

tanks

• The use of an extension
cord is
not recommended.
If an extension
cord is absolutely
necessary,
use at
least a 16 gauge 3-wire cord which
has a 3-prong
grounding
type plug
and a 3-pole receptacle
that accepts
the machine
plug.
• Keep detergents
ers out of chiFdren's

and other
reach.

clean-

• Do not pick up chlorine
bleach,
drain cleaner, gasoline
or any other
toxic material
with this appliance.
• When using recommended
chemicals with this machine,
be certain
area is well ventilated.

• Avoid picking
up hard, sharp
objects
with the cleaner. They may
dmnage
the machine.

• Follow manufacturer's
instructions for all chemicals
used with
this machine.
Do not exceed recommended
mixing
ratios.

• Do not put any object into openings. Do not use with any opening
blocked;
keep free of dust, Iint, hair.
and anything
that may reduce air
flow.

• Store in a dry place. Do not expose machine
to freezing
temperatnres.

• Do not pull or carry by cord, use
cord as a handle,
close door on cord
or pull cord around
sharp edges or
corners.
Do not run appliance
over
cord. Keep cord away from heated
surfaces.

• Do not use with damaged
cord or
plug. If appliance
is not working
as
it should,
has been dropped,
darnaged, left outdoors,
or dropped
into
water, take it to a Hoover
Factory
Service
Center or Authorized
Hoover
Warranty
Service
Dealer.

• Always _disconnect
cord from electrical outlet before servicing the cleaner.

• Use cleaner only for its intended
use as described in the instructions.

• Unplug
cleaner when not in use.
Turn off all controls
before
unplug_ing.
• Do not unplug
cord. To unplug,
the cord.

by pulling
on
grasp the plug.

• Never handle plug or appliance
with wet hands.

not

WARNING:
This product contains chemicals
known to the State of California to
cause cancer. WASH HANDS AFTER
HANDLING.

This appliance must be grounded. If it
should inalfunction
or breakdown,
grounding provides a path of least resis
tance for electrical current to reduce the
risk of electric shock. This appliance is
equipped with a cord having an equip
ment-grounding
conductor (C) and
grounding plug (A). Tile plug must [0e
plugged into an appropriate
outlet (B)
that is properly installed and grounded
in accordance with all local codes and
ordinances.

DANGERIinproper connection of the equipmentgrounding
conductor can result ill tile
risk of electric shock. Check with a quali
fled electrician or service person if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
plug provided with the appliance
if it
will not t_t the outlet, have a proper outlet installed by a qualified electrician.
This appliance is fin" use on a nomilml
120 volt circuit and has a grounding
plug that looks like the plug illustrated
in sketch (A).

A temporary
adapter (D) may be used to
connect this plug to a 2-pole receptacle
(E) if a properly grounded outlet is not
available. The temporary
adapter should
be used only until a properly grounded
outlet (B) call be installed by a qualified
electrician. The green cok_red rigid ear,
lug, or tile like (F) extending ti'Oln the
adapter must be connected to a perma
nent ground (G) such as a properly
grounded outlet box covm: Whenever
the adapter is used, it must be held in
place by a metal screw. NOTE: In
Canada, the use of a temporary adapter
is not permitted by tile Canadian
Electrical Code.

F To contact

us:

• www.hoover.com
• 1-800-944-9200
dealer
locator
° 1-330-499-9499
Response
Monday

- automated

- our

Center
- Friday)

service

Consumer

(8 AM

to 5 PM

Model

No.

Serial

body.

Cleaning
the nozzle
Cleaning
the brushes
Troubleshooting
............
Service
....................

No.

Save your sales receipt
manual.
Proof of date
required
for warranty

Cleaner
description
..........
Assembly
Handle
assembly
...........
Brush/nozzle
assembly
....
General
operation
Mode
selector
dial ..........
Solution
tank
...........

and attach
it to this
of purchase
may be
service
of your cleaner.

Warranty

5
5-6
8
9-10
11
11
11-12

Recommended
cleaning
sequence
.................
Cleaning
floors
...........
Picking
up spills
..........
Storage
....................
Maintenance

For your records,
enter the model
number
and
serial numbers
in the spaces
provided.
These
numbers
are located
on the data label on the back
cleaner

2
3

Recovery
tank
............
Automatic
shut-off
........
To clean filters
.........
How to clean

f Fill in and Save

of the

Important
safeguards
........
Carton
contents
.............

12
13
13
14
......
14
.. 15-16
17
18

..................

f
A. Hard

floor

cleaner

B. Upper
handle
C. Brush assemblies
D. Nozzle
E. Floor

(2)

cleaning

concentrates

A
E

iUS
LISTED
© 2004 The Hoover Company
www.hoover.com

ContiNued

This

cleaner

is intended

for household

use.

Operate
cleaner only at voltage specified on data plate on back of cleaner.
Plug cleaner into a properly grounded
outlet.

1.
2.

Soft hand
grip
ON/OFF
switch

3.
4.

Solution
trigger:
squeeze
cleaning
solution
Mode
selector
dial: turns

5.
6.
7.

ON for wet cleaning
and OFF for wet
pickup
and dry vacuuming
Clean
solution
tank cap/measuring
cup
Clean
solution
tank
Clean
solution
tank release

8.
9.
10.
11.

to release
brushes

Recovery
tank release
Recovery
tank lid and filter
Recovery
tank: collects
dry debris
well as dirty cleaning
solution
Nozzle
release
buttons:
release
nozzle
behind

for easy
nozzle)

clean-up

12.
13.
14.
15.
16.
17.
18.

19.

Nozzle
Squeegee
Bumper
Soft-tread

(underneath

nozzle)

wheels

Carrying
handle
Upper
handle
release
Cord hooks:
top hook
for quick cord release
Handle
release
pedal

button
rotates

(located

Rotate bottom handle support
(A)
to the upright position until a
snap is felt.

control rod (B) on upper banwith slot in bottom handle
support

(D).

Push tapper
is snapped

handle (C) down
in place.

b_pright
install position.
brushes,
it rests on the

that

until

placecleaner
handle backin so
Tilt
floor.

Align post (A) on brush block with hole
(B) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole.

Continued

-P

Press brush assembly
p into place.

firmly to

) install
are out.nozzle, make sure latches

Align middle section (D) of nozzle with
opening (E) on cleaner.
Remove cardboard packing insert from
squeegee area on underside of nozzle.

While holding nozzle in place, slide
inward to lock in place.

-N

Unfold
O

handle

Raise
upright
positionupper
until handle
it locks(A)
in to
place.

Press upper handle release button
(B) to fold handle to storage
position.

Step on pedal
(A) to lower handle
to operating
position.
Handle
does
not lock into a single position,
but
"floats"
to allow convenient
operation.

ON/OFF
Push
cleaner

switch

switch
(A) once to turn cleaner
Push switch
again
to turn
OFF.

To move your cleaner
from room to
put handle
in upright
position, tilt cleaner
back on rear wheels
and push forward.

The
of the

cleaner
carrying
cleaner.

may also be lifted using
handle
(A) on the front

Continued

-P

Your HOOVER FloorMate TM SpinScrub TM 500 Cleaner can be used to both vacuum
dry debris and
wet clean non-carpeted
floor surfaces such as vinyl, tile and sealed wood. It is not intended
for use
on carpet or rugs.
CAUTION:
To prevent
recommendations.

damage

If using
cleaner
on sealed
wood
rated joints.
Do not use FloorMate
of these
conditions
exist.

Mode

selector

to wood
floors,
TM

floors,

inspect
SpinScrub

follow
floor
TM

the flooring

manufacturer's

cleaning

surface
for worn
finish,
bare wood
or sepaCleaner
to wet clean sealed
wood
floors
if any

dial

The

Mode
brushes

selector
dial (A) turns
on and off.

For
debris
pickup,In this
turn position,
the dial the
to the
DRYdry
VAC
position.
brushes will not rotate and are raised off the
floor surface.
To wet clean with
dial to the WASH
For wet pickup,
UP position.

brushes
position.
turn

the

Refer to "How
to clean"
cleaning
instructions.

turned

dial

section

ON,

to the

turn

WET

for complete

the

PICK-

Solution

(upper)

tank

The solution
tank holds
surface
being cleaned.

How

and

water

that

is to be dispersed

onto

the

to fill

Disconnect
Place

detergent

cleaner

handle

from

electrical

in upright,

outlet.
locked

position.

To remove tank, squeeze release button
pull tank straight out.

Carry

tank
Rotate
up

to a sink.
tank cap
to remove

counter-clockwise
cap (A).

Turn cap (A) upside

and

down to serve as a measuring

For hard surface floors such as vinyl, linoleum, marble,
laminate wood, polyurethane
sealed wood or other wood
floors that can normally be cleaned using water, use one
cup (2 oz.) HOOVER® Floor to Floor TM Cleaner'.
Check
for worn
spots or joint
separations
as these
conditions
could
lead to damaged
using water
to clean floor.

before
using,
flooring
when
J

When cleaning ceramic and other tiles, use the set of
grout brushes with gray bristles included with your
FloorMate TM SpinScrub TM 500 Cleaner. Use these for tile
floors where extra attention is needed for cleaning grout.
(See "Cleaning the brushes" section for how to remove
and replace the brush assemblies.)
Using cup, measure
Grout Cleaner.

1-1/2 cupfuls

(3 oz.) of HOOVER®

Continued

-P

NOT

use

cleaning

CAUTION:
HOOVER®
Doing so could damage

concentrates

that

Grout Cleaner
your SteamVac

contain

solvent

cannot be used
Cleaner.

based

ingredients.

in Hoover

SteamVac

products.

Pour

cleaning
concentrate
line (C) (1 quart)
with

If rubber
reposition

ring (D) on cap
it with uneven

into tank (B). Fill tank
warm
water.

has become
side against

dislodged,
ledge
(E) as

shown.

eplace
cap. Rotate
cap clockwise
until it locks in
place. Cap must be locked
in place for proper
performance
and to prevent
leaking.

Slide
place. tank

straight

into

position

until

latch

snaps

Recovery
Automatic

Oower)

tank

shut-off

An automatic
tank to prevent

suction
shut-off
the tank from

is built into
overflowing.

When
the shut-off
activates,
the cleaner
debris
and the sound
of the motor will
ery tank is full and must be emptied.

How

the

recovery

will not pick up
change.
The recov-

to empty

Turn cleaner'
off and disconnect
fl'om electrical
outlet.
Although
not necessary
%r satisfactory
per%rrnance,
it is
recommended
that the recove_ 7 tank be emptied
after dry
vacuuming
and before wet operation.
Check the solution
tank also. It may need to be refilled at
this time.

To
pull remove
tank

Rernove

To clean

tank,
straight

tank

lid

press
out.

down

(C). Empty

on release

(B) and

tank.

filters

The tank lid contains
a washable,
reusable
filter when
suction
is low or reduced.

Turn cleaner

button

off and disconnect

from

filter.

electrical

Clean

this

outlet.

Remove recovery tank and lid (Figs. 24 & 25). Remove
lid (A), then remove filter" (B). Remove loose
debris from filter" by tapping the filter" or"gently brushing
using your hand. The filter may also be rinsed for" additional cleaning. Allow filter" to air"dry between uses.

Cont_nuect

\
Reposition

Replace
place.

filter.
filter

lid.

Press

down

firmly

until

snapped

J
Dry or loose debris
located
in the tank

To remove
Pfilter
from
The filter screen
running
water.

will
lid.

also

collect

on the

filter

screen

debrislid. from
pleated
the
Removescreen,debrisremove
from the
screen
(D).
may

also

be cleaned

by rinsing

it under

Reposition pleated filter in lid. Replace lid onto recovery
tank, pressing down firmly until snapped in place.

@
O

}To
replace
recovery
tankcleaner
behind
ledge
(E) andtank,
pushplace
tank bottom
straight ofinto
body until it is locked in place.

Use your

HOOVER(E)

FloorMate

SpinScmb

500 Cleaner

• Dry V-acuum to remove loose dirt, hair and debris.
, Wet Clean the floor surface. The brushes will provide
• Wet Pickup reduces drying time of the floor surface.

to:

light agitation

The Mode selector dial turns the brushes

to help loosen dirt.
on and off.

dry debris pickup, turn the dial to the DRY VAC posi(A). in this position, the brushes will not rotate and are
raised off the floor surface.
To wet clean with brushes
position (B).
For wet pickup,
I2

turned

ON, turn the dial to the WASH

turn the dial to the WET P_CKUP position

(C).

NOTE:
Your HOOVER€)
FloorMate
TM
SpinScrub
T< 500 cleaner
may be used to clean
that have been sealed
with a polyurethane
coating
and (:an be cleaned
with water.

wood

CAUTION:

cleaning

To prevent

damage to wood floors, follow the flooring

manufacturer's

floors

rec-

If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separatedjoints.
Do not use FloorMate TM SpinScrub TM cleaner to wet clean sealed wood floors if any
of"these conditions exist,
Set Mode

selector

dial to DRY VAC position

floor'.

Turn cleaner' off" and disconnect from electrical outlet. Empty recovery tank (see Figs. 24 &
25). Determine the type of brushes to be used (either" gray for ceramic and other" tiles or white
for vinyl and sealed wood floors). See "Cleaning the brushes" for removing and replacing
brushes.

¸¸¸2¸¸

Fill solution tank with either Floor to Floor Cleaning Concentrate or Grout Cleaner, depending upon the type of floor being cleaned, and water (see Figs. 17 through 23).
Do not use solvent based cleaning
wax in your cleaner.

and vacuum

concentrates

Turn Mode selector dial to WASH position.
Dry hands and plug cleaner into a properly

Step
¸¸6¸¸¸¸¸
[

in your cleaner. Do not use any type of

grounded

outlet.

on handle release pedal and lower handle to operating

To
release
solution,
trigger (A)
(Fig.area
31).toSlowly
move
cleaner
forwardsqueeze
and backward
over
be cleaned.
Squeeze trigger to release solution as needed.

position.

_ilJrn cleaner" ON.

F_J_j_"_

Overlap strokes by one inch to help prevent streaking. The
cleaner's suction will pick up the dirty solution throughout
cleaning.

To greatly enhance drying of the floor surface, release trigger k_
and turn Mode selector dial to the WET PICKUP position. Continue
area to pick up the dirty solution.

To continue cleaning another
through 9.
Note: When cleaning
that no water remains

,,
to move cleaner over the

area, turn Mode selector dial to WASH position. Repeat steps 7

sealed wood floors,
on the floor.

make

sure

all areas are completely

dry: Ensure

Note: When switching between wet cleaning and wet pickup, it is not necessary
cleaner off. Simply move the Mode selector" dial between the two settings.

to turn the

Empty recovery tank or clean the filter when the motor sotmd becomes higher in pitch and
there is a loss of suction (see "Automatic shut-off" section).

Picking

up spills

Your cleaner may also be used to pick up small liquid spills (1 quart or less, never to
exceed 114 inch in depth) on non-carpeted
floors. Turn Mode selector dial to the WET PICKUP position and release the trigger. Continue to move cleaner over the area to pick up the
spill.
Do not use the cleaner to pick up flammable
or combustible
liquids
or chemicals,
use the cleaner to pick up detergents
that contain solvent based ingredients.
Cot_t_t_t_@d

do not
_

Before
Turn

storing
cleaner

cleaner:
OFF

and

Empty
dry.

•

Press on upper
storage.

handle

•

Make

nothing

•

Do not store

sure

rinse

disconnect

•

that

completely

Turn
The

solution

cleaner

from

and

release

electrical

recovery

button

is pressing

on a wood

outlet.

tanks.

Allow

to lower

on the
surface

handle

nozzle

unless

to air

for

squeegee.
cleaner

dry.

Cleaning

and

the nozzle

cleaner

OFF

cleaner's

the

and

disconnect

nozzle

can

be removed

two

nozzle

release

Slide

Remove

inse squeegee
nozzle
under
running
from
(C) and
wipe

from

electrical

for easy

latches

outlet.

cleaning.

(A) outward.

-N

nozzle

(B) by pulling

straight

out.

water.
debris
with a Remove
damp
cloth.

@
D

nozzle>

make

sure latches

be in the upright

(D) are out.

position

for easier

assem-

bly of the nozzle.
Align

middle

section

While holding
place.

(E) of nozzle

nozzle

in place,

with

slide

opening

latches

(F) on cleaner.

inward

to lock

Cleaning
The

the brushes

brush

assembly

Turn

cleaner

OFF

Place

handle

in the

Remove

tanks
Pull

can
and

be removed
disconnect

upright

to prevent

the

two

for easy

nozzle

from

cleaning.

electrical

outlet.

position.
leaking.
release

Set aside.
buttons

(A) out.

Remove

nozzle.

B
Tilt cleaner
Push

back
two

so handle
brush

release

rests

on floor.

buttons

The brushes
can be washed
with
not use a solvent
based
detergent.

(B) and

a mild

remove

detergent

the

and

brush

rinsed.

replace
brushes,
align post (C) on brush
block with hole
on bottom
of cleaner.
Turn brushes
slightly
until post
fits easily into hole. Press brush
assembly
firmly to snap into
place.

@
Return

E
Align middle
cleaner.

cleaner
to upright
position.
sure latches
(E) are out.
section

(F) of nozzle

While holding
nozzle
lock in place.
Replace

tanks.

in place,

with

Replace

opening

slide

latches

nozzle,

(G) on

inward

Use

the

Cleaner

list below

won't

to help

solve

minor

run

problems.

_/Make
sure the cleaner
plugged
in firmly.
,/Check

Low suction

puddling

pick

behind

cleaner

dirty

and

filter

,/Make

sure

tanks

are

locked

_/Check

the

filter

of dry

debris

in place.
if dirty.

is replaced
detergents

,/Make
sure
properly.

tank

solution

recovery

selector
PICKUR

recovery
filter

properly
to reduce

is installed

tank.
dial

recovery

,/Make
sure
positioned.
a line

clean

lid are properly

_/Use
recommended
excess
foaming.

,/Empty

pushes
of it

and

sure nozzle
locked.

,/Check
Mode
set for WET

solution

tank; it may be full
shut-off
engaged.

filter

_/Make
sure
properly.

Cleaner
in front

or breaker.

,/Make
sure
positioned.

_/Empty
Won't

fuse

,/Empty
the recovery
and the automatic

_/Make
and
Water

the

tank

to ensure

it is

is installed

tank.
and

filter

,/Check
Model
selector
set for DRY VAC.

dial

lid are properly
to ensure

it is

,/Tip
nozzle
off floor by pushing
down
on
handle
to pick up debris
that is too large
to clear the squeegee.
Cleaning

solution

won't

dispense

,/Make
sure
position.
,/Refill

Brushes

won't

rotate

the

solution
solution

tank
tank

,/Check
Mode selector
set for WASH.
,/Reset

circuit

(1) Push
OFF.

is locked

if it is empty.
dial

to ensure

it is

breaker.

ON/OFF

switch

to turn

cleaner

/it

Wait one minute.
Plugthe
cleaner
into electrical
outlet.
Pus{1 the ON/OFF
switch
again to
turn cleaner
ON.
If the brushes
continue
to stall and the
breaker
trips again, clean the brushes
to
remove
debris.
Continued

-P

The

motor

is equipped

The addition

To obtain
Factory

with

of lubricant

approved
Service

bearings

contain

could cause damage.

HOOVER

Center

which

service

and

or Authorized

sufficient

lubrication

Do not add lubricant

genuine

Hoover

HOOVER

Warranty

parts,

Service

Company

,/Checking

provided

the

list of Factory

Service

¢' Checking the Yellow Pages under
,/Calling
(U.S.
Do not send

1-800-944-9200

Centers

"Vacuum Cleaners

for an automated

referral

life

of the

motor.

to motor bearings.

locate

Dealer

¢' Checking the Service Section of The Hoover

for the

the

nearest

(Depot)

Hoover

by:

on-line at www.hoover.com
with

this

cleaner

- Household"

of authorized

service

outlet

locations

only)

your

cleaner

to The

Hoover

Company

in North

Canton

for service:

this

will

only

result

in delay.
If further
assistance
Phone:
330-499-9499.

In Canada
Always
mg

parts.

contact

is needed,

Hoover

identify

your

(The

model

contact

Canada.

cleaner
number

by the
appears

The

Hoover

Burlington,
complete
on the

Company

Ontario
model
back

Consumer

LTR 4A8:

number
of the

when

cleaner.)

Phone:

Response

Center.

1-800-263-6376.

requesting

information

or order-

Full One Year
Warranty
(Domestic

Use)

Your HOOVER(,'_ appliance is warranted in normal household use, in
accordance with the Owner's
Manual against original defects in
material and workmanship
fbr a
period of one fidl year fl'om date of
purchase. This warranty provides, at
no cost to you, all labor and parts to
place this appliance in correct operating condition during the warranted
period. This vvarranty applies when
the appliance is purchased in the
United States including its territories
and possessions, or in Canada or
fl'om a U S. Military Exchange.
Appliances purchased elsewhere are
covered by a limited one year warranty which covers the cost of parts
only. This warran V does not apply if
the appliance is used in a commetr:ial
or rental application.
This warranty only applies when the
product is in use in the country or
territory in which it is purchased.
Warranty
service can only be
obtained
by presenting
the appliance
to one of the fbllovving
authorized
warranty
service outlets. Proof of
purchase
will be requh'ed
befbre set'vice is rendered.

1. Hoover Factory Service
Centers.
2. Hoover Authorized
Warranty
Service Dealers (Depots).
For an automated referral of authorized selwice outlets in the U.S.A.,
phone 1-800-944-9200 OR
visit The Hoover Company on-line
at

WWv_.hoogeg

con]

This warranty does not cover pick
up deliver_ or house calls; however,
if you mail your appliance to a
Hoover Factory Service Center fin"
warranty service, transportation
will
be paid one way.
While this warranty gives you specific legal rights, you may also have
other rights which vary fl'om state to
state.
If fiJrther assistance
is needed,
or if
there are questions
concerning
this
warranty
or the availability
of warranty service outlets, write or phone
the Consumer Response Center,
Phone 1-330-499-9499.

In Canada, contact Hoover Canada,
Burlington, Ontario LTR 4A8,
1-800-2(i3-6376.
I9

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 19
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Thu Apr 05 11:54:47 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Hoover H3030 User Manual Manuals And Guides L0502277

HOOVER Power Steamer Manual L0502277 HOOVER Power Steamer Owner's Manual, HOOVER Power Steamer installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation