Hoover Dishwasher Nextra HEDS 1064 Instruction Manual Product Code 32000683 80

User Manual: Hoover Instruction Manual Free standing HEDS 1064 - Dishwasher Help and Advice from Hoover

Open the PDF directly: View PDF .
Page Count: 15

HEDS 1064-80

1

This manual contains sections of Safety

Instructions,Operating Instructions,

Installation Instructions and Troubleshooting

Tips etc. Carefully reading it before using the

dishwasher will help you to use and maintain

the dishwasher properly.

To review the section on Troubleshooting Tips

will help you to solve some common problems

by yourself and not need to ask for the help of

professional technicians.

ControlPanel........................2

DishwasherFeatures................. 2

WashCycleTable.................... 3

WaterSoftener...................... 4

Detergent...........................5

RinseAid......................... 5,6

Loading the Dishwasher Rack . . . . . . . . 6,7

TurningOntheAppliance..............7

FilteringSystem..................... 8

CaringfortheDishwasher.......... 9...

About Electricity connection . . . . . . . . . . 10

AbouttheUnicouple.................10

WaterConnection...................11

Dimensions........................11

Beforecallingforservice.......... 12,13

..................1

The manufacturer, following a policy of constant

development and up-dating of the product, may

make modifications without giving prior notice.





1



Keep child away from detergent and rinse aid, keep

child away from the open door of the dishwasher,

there could still be some detergent left inside.



Do not abuse, sit on, or stand on the door or dish

rack of the dishwasher.



Do not touch the heating element during or

immediately after use.



Do not wash plastic items unless they are marked

dishwasher safe or the equivalent. For plastic

items not so marked, check the manufactures

recommendations.

Use only detergent and rinse additives designed

for an automatic dishwasher. Never use soap ,

laundry detergent, or hand washing detergent

in your dishwasher. Keep these products out of

children.





During installation, the power supply must not

be excessively or dangerously bent or flattened.

The door should not be left in the open position

since this could present a tripping hazards.





Do not tamper with controls.



Do not operate your dishwasher unless all

enclosure panels are properly inplace. Open the

door very carefully if the dishwasher is operating,

there is a risk of water squirting out.



Do not place any heavy objects of stand on the door

when it is open. The appliance could tip forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to

damage the door seal;

2) Load sharp knives with the handles up to reduce

the risk of cut-type injuries.



When using your dishwasher, you should prevent

plastic item from contacting with heating element.



If the supply cord is damaged, it must be replaced

by the manufacturer or its service agent or a

similarly qualified person in order to avoid a

hazard.



Please dispose of packing materials properly.





Use the dishwasher only for its intended function.



Remove the door to the washing compartment when

removing an old dishwasher from service or discarding it.

The appliance is not intended for use by young

children or infirm persons without supervision.

Dishwasher detergents are strongly alkaline,they

can be extremely dangerous if swallowed.Avoid

contactwithskinandeyesandkeepchildrenaway

from the dishwasher when the door is open.

Young children should be supervised to ensure that

they do not play with the appliance.

Check that the detergent receptable is empty after

completion of the wash cycle.









This appliance complies with international

safety standards, and is fitted with a plug with

earthconnectiontoensurecompleteearthing

of the product.

Before connecting the appliance to the mains

supply it is important to ensure:

That the supply socket is properly earthed.

That your electricity supply is capable of

meeting the consumption requirements

listed on the rating plate of your appliance.

Ensure that your product is properly earthed. In the

absence of adequate earthing you will notice that when

touching the metal parts of your appliance an

electrical dispersion can be felt, due to the presence of

a radio interference suppressor.

This appliance complies with Directives

89/336/EEC, 73/23/EEC and following changes.

Cutlery is washed best if it is placed in the basket with

handles downwards.

knives and other utensils with sharp points must be

loaded in the basket with their points down or placed in a

horizontal position.

Warning:

Important: when the appliance location is on carpet

floors, attention must be paid so as to ensure that

there is no obstruction to the bottom vents.





This appliances is intended to be used in household and similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by

expert or trained users, is excluded even in the above applications.

If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’

s warranty.

Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use

(even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted

by law.

To get the best performance from your dishwasher,read all operating instructions before using it for the

first time.

2

Upper Basket

Spray Arms

Lower Basket

Water Softener

Detergent Dispenser

Silverware BasketMain Filter

Cup Shelf

5

6

7

8

Rinse Aid Dispenser

Coarse Filter

Drain pipe connector

Inlet pipe connector

9

10

12

11

3

2

14

10 Start / Reset Button: Press this button to start or pause the

selected program. When the program start one of the lights

will blink.

9 Power Light : To come on when the ON/OFF Button is Press d

down.

e

1 Pre-rinse light: Blink during pre-rinse.

2Washlight: wash.blink during

3 Rinse light: b rinse.link during

4 Drying light: b drying.link during

7 Washing Program Selector: Turn the knob clockwise to

select wash cycles.

NOTE: this model has a "broken remember" function, which

means that power supply broken down during washing

will not reset the current washing program. So you can't

cancel a program by cutting off the power. pls see the

section entitled "change a program".

8 ON/OFF Button: To turn ON/OFF the power supply.

5

No Salt Indicator Light: comes on when there is not enough

salt in the softener (Certain model only).

6

Rinse Aid indicator light: comes on when there is not enough

rinse agent (Certain model only).

11 Door Handle: Pull it to open the door.

11 12

3

If all the lights begin to glimmer, that indicates the machine is out of order, please turn off the main power and water supply

before calling a service.

3

4

5

6

7

8

1

Draw out the lower and upper basket, load the dishes and

push them back. It is recommended that loading the lower

basket first, then the upper one (see the section entitled

" Loading the Dishwasher " ).

Press the ON/OFF button

Turn the knob located on the right of the control panel in

the clockwise direction until the number or the symbol

for the cycle

Press the button to start the washing.

Start/Reset

When the washing is over, you can shut off the sw tch by

pressing on/off button.

i

With a little force to ensure the door is properly closed.

NOTE: A click could be heard when the door is closed

perfectly.

2

Pour in the detergent(see the section entitled,

"Salt,DetergentandRinseAid").

Insert the plug into the socket.

The power supply is 220-240VAC 50Hz, the specification

ofthesocketis12A250VAC,Makesurethatthewater

supply is turned on to full pressure.

The four program lights shows the state of the dishwasher:

a)All program lights off-----------------stand by

b)One of the program lights on-----------pause

c)One of the program lights blinking-------run

Please press the Start/Reset button and last more than

three seconds, this will cancel the current programme.

(NOTE: turning off the appliance by pressing the on/off

button can not cancel the current programme, because

this model has a "broken remember" function.)

Turn around the to select the

desired programme.

Washing Program Selector

Press the Start/Reset button to start the washing.

1

2

3

Premise

: A cycle that is underway can only be modified if it

has only been running for a short time. Otherwise, the detergent

may have already been released, and the appliance may have

already drained the wash water. In this case, the detergent

dispenser must be refilled (see the paragraph entitled " Loading

the Detergent " ).

NOTE: If you open the door when washing, the machine

will pause. When you close the door and press the

Start/Reset button, the machine will keep on working after

10 seconds.

For normally soiled loads,

such as , plates,glasses

and lightly soiled pans.

standard daily cycle.

pots

For the heaviest soiled loads,

such as pots,pans,casserole

dishes and dishes that have

been sitting with dried food

on them for a while.

For lightly soiled loads,such

as plates,glasses,bowls and

lightly soiled pans.

To rinse dishes that you

plan to wash later that day.

Pre-wash

Pre-wash (45 C)

°

Wash (70 )

°

C

Rinse (75 )

°

C

Drying

Pre-wash

Wash (55 )

°

C

Rinse (65 )

°

C

Drying

Pre-wash

Wash (45 )

°

C

Rinse (65 )

°

C

Drying

Pre-wash(30

°)

C

Wash (70 )

°

C

Rinse (65 )

°

C

Drying

Wash (50 )

°

C

Rinse (55 )

°

C

Drying

A shorter wash for lightly soiled

loads (max 4 plate settings).

8/24 gr

5/22 gr

4/20 gr

20 gr

15 gr

Pre-wash

Daily wash in only 1 hour.

Suitable for normal soiled

dishes that are to be washed

straight after a meal (max 6 plate

settings).

(EN 50242)

4

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower rack and should be filled as follows:

Remove the lower basket and then unscrew and remove the cap from the salt

container.

If you are filling the container for the first time ,fill 2/3 of its volume with water.

Place the end of the funnel(supplied) into the hole and introduce about 2kg of

salt .It is normal for a small amount of water to come out of the salt container

Carefully screw the cap back on.

1

2

4

3

Unscrew the cap from the salt container.

There is a ring on the container with an arrow on it (see Figure to the side), if

necessary, rotate the ring in the anticlockwise direction from the "-" Setting

toward the "+" sign, based on the hardness of the water being used.It is

recommended that adjustments should be made in accordance with the following

schema:

1

2

1.

2.

The salt container must be refilled when the salt warning light comes on. Though the salt container is filled

enough, the indicator light may not black out before the salt fully dissolve.

If there are spills of the salt, a soak program could be run to wipe them out.

Contact your local water board for information on the hardness of your water supply.

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes

and utensils.

The appliances is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the

water.

The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used.

This is intended to optimize and customize the level of salt consumption so that the salt consumption could be set proceed as

follows:

There are two ways to reduce the hardness: one way is using water softener, the other is using

detergent.

water

If your model have not water softener, you may skip this section.

WATER HARDNESS

°fH mmol/l

Selector

Position

Salt consumption

(gram/cycle)

Auto nomy

(cycles/2kgs)

0~10 0-5 0-1.0

/

0/

10~25 5-14 1.0-2.5

-

20 60

25~50 14-28 2.5-5.0 MED 40 40

>50 >28 >5.0 +60 25

dH

5

Dishwasher detergent is corrosive! Take care to keep it out

of reach of children.

IF THE WATER ISN'T TOO HARD, YOU MAY ALSO PREVENT THE FORMATION OF DEPOSITS BY ADDING DETERGENT.

The amount of detergent needed can vary due to differences in water hardness. To determine the water hardness in your area,

contact your local water utility or area water softening company. The harder the water, the more detergent you may need.

Remember, you should adjust the amount of detergent you use by small amounts until you find the correct amount.

To remove hard water spots, try the following:

Run dishes through a normal wash program.

Remove all metal dishware, such as cutlery, pans, etc.,

from the dishwasher.

Do not add detergent.

Pour two cups of vinegar into a bowl and set the bowl face

up on the lower rack of the dishwasher.

Run the dishes through a normal wash program.

If this doesn't work, try the same process with 1 / 4 cup of

citric acid crystals instead of vinegar.

Use only detergent specifically made for use in dishwashers.

Keep your detergent fresh and dry. Don't put powder detergent

into the dispenser until You're ready to wash dishes.

The rinse aid is released during the final rinse to prevent water

from forming droplets on your dishes that can leave spots and

streaks. It also improves drying by allowing water to "sheet" off

the dishes.

Your dishwashers are designed to use liquid rinse aids. The

rinse aid dispenser is located inside the door next to the

detergent dispenser. To fill the dispenser, open the cap and

pour the rinse aid into the dispenser until the level indicator

turns completely black. The dispenser holds about 100 ml of

liquid rinse aid.

Be careful not to overfill the dispenser, because this could

cause oversudsing. Wipe away any spills with a damp cloth.

Don't forget to replace the cap before you close the dishwasher

door.

If you have soft water, you may not need rinse aid for it may

cause a white film to develop on your dishes.

YOU MAY NOT ADD TOO MUCH DETERGENT TO PREVENT THE FORMATION OF DEPOSITS BECAUSE YOUR DISHWASHERS

HAVE SPECIALLY-DESIGNED WATER SOFTENERS.

The dispenser must be refilled before the start of each wash cycle following the instructions provided in the" Wash Cycle

Table".Your dishwashers than conventional dishwashers. Generally, only one tablespoon of

detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent. Always add the detergent just

before starting dishwasher, otherwise it could get damp and will not dissolve properly.

use less detergent and rinse aid

To open the dispenser, turn the cap to the "open" (left)

arrow and lift it out.

Pour the rinse aid into the dispenser, being careful not to

overfill.

Replace the cap by inserting it aligned with "open" arrow

and turning it to the closed (right) arrow.

A measured amount of rinse aid is released during the final rinse. As with detergent, the amount

of rinse aid needed for your dishes depends on the hardness of the water in your area. Too much

rinse aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the

water in your area is very soft, you may not need rinse aid. If you do,you can dilute the rinse aid

with an equal amount of water.

The rinse aid dispenser has six settings. Always start with the dispenser set on " 1 ". If spots and

poor drying are problems, increase the amount of rinse aid dispensed by removing the dispenser

lid and rotating the dial to "2". If the dishes still are not drying properly or are spotted, adjust the

dial to the next higher number until your dishes are spot-free. We suggest you to set on "4" .

(If only four settings we suggest you to set on "2".)

6

In accorance with En50242 standard, the dispenser should be set on the maximum lever when

doing the performance.

6

If there is no rinse aid warning light in the control panel, you can judge the amount of rinse aid by the following means. The

black dot on the rinse aid dispenser indicates the amount of rinse aid in the dispenser. As the rinse aid diminishes, the size of

the black dot decreases. You should never let the rinse aid get below 1 / 4 full.

As the rinse aid diminishes, the size of the black dot on the rinse

aid level indicator changes, as illustrated below.

Full

3/4full

1/2full

1 / 4 full - Should refill to eliminate spotting

Empty

The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cup and saucers, as well

as plates, small bowls and shallow pans(as long as they are not too dirty).

Position the dishes and cookware so that they do not get moved by the spray of water.

The upper rack can be adjusted for height by putting wheels of different height into the rails.

We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,

serving dishes and bowls, as shown in the figure to the right.

It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the

top spray arm.

Pots, serving bowls, etc, must always be placed top down.

Deep pots should be slanted to allow water to flow out.

The bottom rack feature fold down tine rows so that larger or more pots and pans can be loaded.

1Cups

2Small serving bowl

3Large serving bowl

4 Glasses

Saucers5

6Dish

Dessert dishes

7

1

1

1

2

3

4

4

7

4

5

6

1

1

Oval platter

3Soup plates

Dessert dishes

2

4Dinner plates

5Silverware basket

1

3

3

36

44

5

6Saucer

2

2

7

Silverware should be placed in the silverware basket with handles at the bottom: If the rack has side baskets, the spoon should

be loaded individually into the appropriate slots, Especially long utensils should be placed in the horizontal position at the

front of the upper rack.

When the working cycle has finished, the buzzer of dishwasher will mooing 8 second ,then stop .

Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of

the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes

and utensils while they are still hot and more susceptible to breakage. Theywillalsodrybetter.

A forgotten dish can be added any time before the detergent cup opens.

Open the door a little to stop the washing.

After the spray arms stop working,you can open the door

completely.

Add forgotten dishes.

Close the door, the dishwasher will work after ten second.

4

3

2

1

Do not leave any item extend through bottom.

Knives and other utensils with sharp points

must be loaded in the basket with their points

down or placed in an horizontal position.

It is dangerous to open the door when washing, because the hot water may be scalded to you. The door should not be left in the

open position since this could present a tripping hazard.

211

2

1111

455 5 4

44

2

4

2

4

2

23

3

3

4

3

3

32

2

4

2

4

2

4

55

1

867

11

55

6

5

3

33

3

55

1

Teaspoons

4

Soup spoons

2

Forks

1

Serving forks

8

Serving spoons

6

Knives

5

3Dessert spoons 7Gravy ladles

8

Coarse filter

Larger items, such as pieces of bone or glass, that could clog the drain are trapped in the

coarse filter. To remove an item caught in this filter, gently squeeze the tabs on top of this

filter and lift it out.

For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub. There are three

components of the filtering system: the main filter, the coarse filter, and the fine filter.

2

Fine filter

This filter holds soil and food residue in the sump area and prevents it from being

redeposited on the dishes during a cycle.

Main filter

Food and soil particles trapped by this filter are pulverized by a special jet on the lower spray

arm and washed down the drain.

1

3

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

Cut off electrical power to the dishwasher. Remove

fuses or trip circuit breaker.

Turn off the water supply and disconnect the water

inlet pipe from the water valve.

Drain water from the inlet and water valve.pipe

(Use a pan to catch the water.)

Reconnect the water inlet to the

water valve.

pipe

Remove the plastic sump cover in the

tub the bottom and use a sponge to

soak up water in rubber boot.

5

4

3

2

1

It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To remove the

spray arm, screw off the nut to take out the washer on top of the spray arm and remove the arm. Wash the arms in soapy and warm

water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly.

Never run the dishwasher without the filters in place.

Filter assembly

For best performance and results, the filter assembly must be cleaned.

The filter efficiently removes food particles from the wash water, allowing it to be

recirculated during the cycle. For this reason, it is a good idea to remove the larger

food particles trapped in the filter after each wash cycle by rinsing the semicircular

filter and cup under running water. To remove the filter assembly, pull on the cup

handle in the upward direction. The entire filter assembly should be cleaned at least

once a month.

To clean the coarse filter and the fine filter, use a cleaning brush. Then, reassemble

the filter parts as shown in the figures left and reinsert the entire assembly in the

dishwasher, positioning in its seat and pressing downward.

The dishwasher must never be used without the filters. Improper replacement of the

filter may reduce the performance level of the appliance and damage dishes and utensils.

2

3

1

9

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed

to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.

To clean the edge around the door, you should use only a soft warm, damp rag. Toprevent

penetration of water into the door lock and electrical components, do not use a spray cleaner

of any kind.

Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will

scratch the finish. Some papers towels can also scratch or leave marks on thesurface.

After every wash, turn off the water supply to the

appliance and leave the door slightly ajar so that

moisture and odors are not trapped inside.

Before cleaning or performing maintenance, always

remove the plug fromthe socket. Do not run risks.

To clean the exterior and rubber parts of the dishwasher,

do not use solvents or abrasive cleaning products.

Rather, use only a cloth and warm soapy water.

To remove spots or stains from the surface of the

interior, use a cloth dampened with water and a little

white vinegar, or a cleaning product made specifically

for dishwashers.

When you go on holiday, it is recommened that you run a

wash cycle with the dishwasher empty and then remove

the plug from the socket, turn off the water supply and

leave the door of the appliance slightly ajar. This will help

the seals last longer and prevent odors from forming

within the appliance.

If the appliance must be moved, try to keep it in the vertical

position.If absolutely necessary, it can be positioned on

its back.

One of the factors that cause odors to form in the

dishwasher is food that remains trapped in the seals.

Periodic cleaning with a damp sponge will prevent this

from occurring.

10

Pull Unicouple and its hoses completely out from storage compartment located at rear of dishwasher

and attach it to the faucet adapter.

Turn water fully on before starting the dishwasher.

3

1

Turn off the water.

Release the water pressure by depressing the pressure release button. This relieves water pressure and protects you, and the

room, from severe splashing.

Release Unicouple from faucet by depressing the collar at the top of the Unicouple connector.

3

2

1

Remove the power cord plug from the wall receptacle.

Disconnect Unicouple from faucet adapter.

2

1

If faucet has not threads: attach the faucet adapter to faucet, then tighten every screw

of the adapter. To prevent leaking your should tighten the adapter.

2

Attach the Unicouple connector to the faucet adapter by depressing the collaratthetopoftheconnector.

When Unicouple is all the way up onto the adapter, release the collar. It willthensnapIntopositionto

lock the Unicouple in place. The Unicouple s small hose carries water from the faucet to the dishwasher.

Its large hose carries drain water to the sink. Be sure Unicouple is pointing toward the sink bowl drain

opening and the sink drain is open for water that will drain from your dishwasher. If your dishwasher

drains into a disposer, operate the disposer until it is completely empty before starting the dishwasher.

'

A hose that attaches to a sink spray can burst if it is installed on the same water line as the dishwasher. If your sink has one, it is

recommended thet the hose be disconnected and the hole plugged.

Fused electrical supply is required-copper wire only. Time delay fuse or circuit breaker recommended and provide separate

circuit serving only this appliance. Outlet should be placed in adjacent cabinet.

Make sure that the plug on the appliance remains accessible after installation.

After making sure that the voltage and the frequency values for the current in the home

correspond to those on the rating plate and that the electrical system is sized for the

maximum voltage on the rating plate, insert the plug into an electrical socket which is

earthed properly. If the electrical socket to which the appliance must be connected is not

appropriate for the , replace the socket ,rather than

using a adaptors or the like as they could cause overheating and burns.

plug (installed by a qualified electrician)

The appliance must be connected to the water mains using new hose-sets.

The old hose-sets should not be reused.

Water pressure must be between 0,04 MPa and 1 MPa. If the pressure is below theminimum

consult our Service Department for advice.

11

If the sink is 34 or higher from the floor, the excesswater in Unicouple hoses

cannot be drained directly into the sink. It will be necessary to drain excess

water from hoses into a bowl or suitable container that is heldoutside and lower

than the sink.

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is

fastened tightly in place.

If the water pipes are new or have not been used for an extended period of time, let the water

runtomakesurethatthewaterisclearandfreeofimpurities.Ifthisprecaution is not taken,

there is a risk that the water inlet can get blocked and damage the appliance.

The water supply to the appliance can also be connected to the house hot waterline

(centralized system, heating system),as long as it does not exceed a temperature of 60 C.

In this case, the wash cycle time will be shortened by about 15 minutes and thewash

efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those

for the connection to the cold water line.

DIMENSIONS(mm)

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let itrunintothesink,makingsuretoavoidbending

or crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a height

between 40 and 100cm and must not be immersed in water.

Once the appliance is positioned,adjust the feet (screwing them in or out) to adjust the

height of the dishwasher, making it level. In any case ,the appliance should not be inclined

more than 2 .

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent

cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to

facilitate proper installation.

φ 40mm

Fuse blown, or the

circuit breaker acted

Replace fuse or reset circuit breaker. Remove any other

appliances sharing the same circuit with the dishwasher

Sound from soft food shredding action and detergent cup

opening.

Utensils are not secure

in the baskets or something

small has dropped into

the basket

To ensure everything is secured in the dishwasher.

Motor hums Dishwasher has not been used regularly. If you do not use it

often, remember to set it to fill and pump out every week,

which will help keep the seal moist.

Improper detergent

Add 1 gallon of cold water to the tub. Close and latch the

dishwasher, then drain out the water by slowly turning the

Dial until a drain period is reached. Repeat if necessary.

Spilled rinse agent Always wipe up rinse agent

spills immediately.

Detergent with

colorant was used

Make sure that the detergent is the one without colorant.

Rinse agent dispenser

is empty

Make sure that the rinse agent dispense is filled.

Improper program

Improper rack loading Make sure that the action of the detergent dispenser and

spray arms are not blocked by large dishware.

Extremely hard water

Low inlet

temperature

Overloading the

dishwasher

Improper loading

Old or damp powder

detergent

Empty rinse agent

dispenser

Incorrect dosage of

detergent

To remove spots from glassware:

Take out all metal utensils out of the dishwasher.

Do not add detergent.

Choose the longest cycle.

Start the dishwasher and allow it to run for about

18 to 22 minutes, then it will be in the main wash.

Open the door to pour 2 cups of white vinegar

into the bottom of the dishwasher.

Close the door and let the dishwasher complete

the cycle. If the vinegar does not work: Repeat

as above, except use 1/4 cup (60 ml)of citric acid

crystals instead of vinegar.

Some audible sounds are

normal

'

Make sure the dishwasher is turned on and the door is

closed securely.

Check that the water supply is connected properly and

the water is turned on.

Make sure the power cord is properly plugged into the

wall socket.

Power supply is not

turned on

Water pressure is low

'

Overflow The system is designed to detect an overflow. When it

does, it shuts off the circulation pump and turns on the

drain pump.

Select stronger program

Use only the special dishwasher detergent to avoid suds.

If this occurs, open the dishwasher and let suds evaporate.

12

Combination of soft

water and too much

detergent

Use less detergent if you have soft water and select a

shortest cycle to wash the glassware and to get them clean.

Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm water

to remove the stains by hand.

You have to wait for 20 minutes after a cycle to let the heating

elements cool down before cleaning interior; otherwise, burns

will happen.

Iron deposits in water

can cause an overall film

You have to call a water softener company for a special filter.

Hard water minerals To clean the interior, use a damp sponge with dishwasher

detergent and wear rubber gloves. Never use any other cleaner

than dishwasher detergent for the risk of foaming or suds.

Dial is not in the

position

OFF

Turn the Dial to

OFF position and slide the door latch to the

left.

Dishes block detergent

cups

Re-loading the dishes properly.

Normal phenomenon There is some steam coming through the vent by the door

latch during drying and water draining.

Aluminum utensils have

rubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.

'

This is normal A small amount of clean water around the outlet on

the tub bottom at the back of the tub keeps the water

seal lubricated.

Be careful not to overfill the rinse aid dispenser.

Spilled rinse aid could cause oversudsing and lead

to overflowing. Wipe away any spills with a damp cloth.

Make sure the dishwasher is level.

Overfill dispenser or rinse

aid spills

Dishwasher isn t level

'

13

Longer inlet time.

Faucets is not opened.

Longer draining time.

The installation position of the drain pipe is too high.

Longer heating time,

but not reaching required temperature

Malfunction of temperature sensor or of heating element.

Overfilled.

Too much inlet water. .

Failure of temperature sensor

Short circuit or break of temperature sensor

Open circuit or break of temperature sensor

Failure of temperature sensor