Hoover Spirit Upright Vacuum Cleaner SP2101 Instruction Manual Product Code 39100323

User Manual: Hoover Instruction Manual Spirit SP2101 - Vacuum Cleaner Help and Advice from Hoover

Open the PDF directly: View PDF .
Page Count: 10

®

USER

INSTRUCTIONS

SPIRIT

48005513 spirit manual.indd 1 5/2/2012 11:37:05 AM

User’s manual - This cleaner should only be

used for its intended purpose as described in

these instructions. Ensure that these are fully

understood before operating this appliance.

Only use attachments recommended or

supplied by Hoover.

When using cleaning tools, ensure that the

cleaner is kept in the upright (parked)

position. This will avoid possible damage to

the carpet or floor covering. When cleaning

stairs, DO NOT position the cleaner above

you.

STATIC ELECTRICITY. Some carpets can

cause a small build up of static electricity. Any

static discharge is not hazardous to health.

DO NOT use your cleaner out of doors or

on any wet surface or for wet pick up.

Keep hands, feet, loose clothing and hair

away from rotating brushes.

DO NOT pick up hard or sharp objects,

matches, hot ashes, cigarette ends or other

similar items.

DO NOT pick up flammable liquids such as

cleaning fluids, petrol, etc or their vapours.

Aerosol sprays may be flammable. DO

NOT spray near cleaner.

Congratulations on the purchase of your

new Hoover Spirit

This highly advanced machine - with new

technology unique to Hoover - makes

cleaning easier and more efficient.

You’ll find it kinder to your carpets - and

to you!

Please take the time to read this manual

carefully.

You’ll then be ready to make the most of

the special features only the new Hoover

Spirit can offer!

This appliance is double-insulated and must not

be earthed.

The plug is fitted with a 13 amp fuse.

IMPORTANT:The wires in the mains lead are

coloured in accordance with the following

code:

Blue - NEUTRAL

Brown - LIVE

In the unlikely event that any item is missing or you experience any problems with the product,

DO NOT TAKE IT BACK TO THE SHOP

Please contact the Hoover customer helpline:

Tel: 08444 995 599

Email: customer.services@hoovercandy.com

Should any faults occur with your cleaner during the first 12 months, contact the Hoover Customer

Helpline on the number above.

If you are having difficulty in obtaining filters or any other accessories for your cleaner contact the

Hoover Customer helpline or order online at www.hooverspares.com

IMPORTANT SAFETY REMINDERS

SUPPLY CORD. DO NOT run over the

supply cord when using your cleaner or

remove the plug by pulling on the supply

cord.

FAULTS. DO NOT continue to use your

cleaner if it appears to be faulty. If the supply

cord is damaged stop using the cleaner

IMMEDIATELY. The supply cord must be

replaced by an authorised Hoover service

engineer to avoid a safety hazard.

AFTER USE. Switch the cleaner off and

remove the plug from the electricity supply.

Always switch off and remove the plug before

cleaning the appliance or attempting any

maintenance task.

Safety with children, elderly or the infirm: This

appliance is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

HOOVER SERVICE. To ensure the continued

safe and efficient operation of this appliance

we recommend that any servicing or repairs

are only carried out by an authorised Hoover

service engineer.

WARNING!

ELECTRICITY CAN BE

EXTREMELY DANGEROUS

- 2 -

48005513 spirit manual.indd 2 5/2/2012 11:37:05 AM

Effortless

cleaning

with your

new Hoover

SPIRIT

When first unpacking your

cleaner please check all items

are included:

Cleaner body

Main handle

Long Crevice Tool

2 in 1 tool (Furniture nozzle /

Dusting brush)

Rigid extension tube

Pet Hair & Allergen Remover*

If any parts are missing contact

your retailer or call the Hoover

helpline on 08444 995 599

PET HAIR & ALLERGEN

REMOVER*

HANDLE

POWER CORD

2 IN 1 TOOL

CLEANER

RELEASE

PEDAL

ON/OFF

PEDAL

HANDLE

BIN RELEASE

DUST

CONTAINER

EXHAUST

FILTER COVER

CARPET CARE

CONTROL

SELECTOR

HOSE

SOCKET

GETTING TO KNOW YOUR CLEANER

WASHABLE

HEPA FILTER &

PROTECTIVE MESH

- 3 -

HOSE STORAGE

HOOK

HOSE

EXTENSION

TUBE AND

CREVICE TOOL

* Certain models only

CORD STORAGE

HOOK

48005513 spirit manual.indd 3 5/2/2012 11:37:06 AM

PREPARING YOUR CLEANER

Insert the main handle in the cleaner body

and then xe it with the screw provided.

To tighten the screw you can use a

standard coin.

CARPET CARE CONTROL SELECTOR

The carpet care control selector raises and lowers the

height of the foot.

For a medium pile carpet, the best carpet cleaning is

achieved by setting the selector to the INTENSIVE CLEAN

position.

For all other types of carpet try various settings until you

get the best result for your carpet.

Ensure that the cleaner is in an upright (parked) position.

Rotate knob to position best suited to depth of carpet

pile.

Note: Using this cleaner for loop carpets or carpets

with pile greater than 30mm is not recommended.

Please consult the floorcare/carpet manufacturer’s

recommended cleaning instruction before vacuuming.

!IMPORTANT! When cleaning hard floors

such as vinyl or linoleum, move the selector

knob to the HARD floor position. Failure to

do so may cause damage to the floor

surface.

CLEANER RELEASE

Unlock the cleaner by pressing down on the left pedal

with your foot.

POWER SWITCH

To switch the cleaner on or off press down on the right

pedal with your foot.

- 4 -

* Certain models only

RELEASE

48005513 spirit manual.indd 4 5/2/2012 11:37:08 AM

CLEANING TOOLS

!

IMPORTANT! When using cleaning tools, the cleaner must be kept in the upright position,

particularly when cleaning stairs. The nozzle height should also be set to tool mode.

Remove hose from the hose

socket.

Remove the crevice tool from

the extension tube.

Fit the extension tube to the

hose.

Attach the crevice tool to the

extension tube or directly to the

hose.

Fit the dusting brush or the Pet

Hair and Allergen Remover* to

the hose or at the end of the

extension tube.

Handle

All accessories can t onto the end of the hose. Combine accessories depending on use.

Pet Hair & Allergen Remover*

The pet hair & allergen remover is ideal for removing pet hairs.

DO NOT touch the rotating brush.

1

4

2

5

3

6

CLEANING THE STAIRS

STORING THE CLEANER

It is dangerous to place the cleaner

above you when cleaning stairs.

ALWAYS work with the cleaner

below you. Ensure it is positioned

up against the bottom step.

Turn the cleaner off and remove the plug. Wind the

power cord around the cord storage hooks.

- 5 -

Pull out extension tube and

crevice tool.

* Certain models only

48005513 spirit manual.indd 5 5/2/2012 11:37:10 AM

EMPTYING THE DUST CONTAINER

Hold the container over

the Bin and press the

easy open button at the

rear of the container.

The dust container door

will open and you can

empty into a bin with no

dust contact.

Once emptied, gently tap

or shake the container to

release any excess dust

from the filters.

Do not overfill the bin

above the max level line.

2

43

To remove the dust container from the

cleaner press the bin release button.

1

CLEANING THE PRE MOTOR FILTERS

Rotate the upper part of the dust bin to open.

1Remove the lter assembly from the bin top by

rotating the lter. It is advisable to wash the lters

after every 5 bin empties.

2

Remove the protective lter mesh from

the HEPA lter, then gently tap both

lters to release any excess dust.

3Wash both lter and protective mesh under warm

water until the water runs clean. Remove excess

water by shaking and leave to dry for 24 hours.

Reassemble and ret lters to cleaner, only when

they are completely dry.

4

CLEANING THE EXHAUST FILTER

The exhaust filter should be washed every month.

Press down on the latch to remove the exhaust cover.

Remove filter and wash with warm water.

Remove excess water by shaking and leave to dry for

24 hours. Refit filters only when completely dry.

!

IMPORTANT! Ensure the protective mesh is

reassembled to the HEPA lter before use

- 6 -

48005513 spirit manual.indd 6 5/2/2012 11:37:12 AM

CHANGING THE BELT OR BRUSHES CLEARING A BLOCKAGE

IMPORTANT: Switch the cleaner off and

remove the plug from the electricity supply

before dismantling cleaner

IMPORTANT: Switch the cleaner off and

remove the plug from the electricity supply

before dismantling cleaner

If your cleaner is not picking up efciently, the belt or brushes (or both) may need replacing, but rst please make

sure you have:

• Emptied the dust container

• Cleaned the lters

• Checked for blockages

Turn the cleaner over and remove 6

retaining screws attaching the brush guard

to the base.

Remove the brush guard

Hold the brush assembly and stretch the

belt until the brush can be slotted back

into the cleaner housing.

Rotate the brush to ensure free movement

of the belt.

Refit the brush guard with 6 retaining screws.

1 4

2

3

5

6

If cleaning tools were

in use, check the

cleaning tool and the

hose.

Check the hose by

removing it from the

cleaner.

Turn the cleaner

over and rotate the

brushes until they

are free to rotate.

Check for a blockage in

the hose socket. Use a

flexible rod to remove

any obstruction.

To remove a blockage

from the Pet Hair &

Allergen Remover*,

open the nozzle at each

side, lift cover and remove

the blockage.

- 7 - *Certain models only

Remove brush assembly and check for

wear on the belt.

Loop the new

belt around the

motor and brush channel.

48005513 spirit manual.indd 7 5/2/2012 11:37:13 AM

Genuine HOOVER Spares

Tel. 08443 712 758

www.hooverspares.com

Always replace parts with genuine Hoover spares. When ordering parts,

always quote your model number.

Hoover Customer Helpline

Should any faults occur with your cleaner during the first 12 months,

contact the Hoover Customer Helpline on the number below.

Tel: 08444 995 599

Email: customer.services@hoovercandy.com

Hoover have a computerised nationwide service network of over 500

engineers who will quickly respond to your call and guarantee your repair

for 12 months.

Environment - WEEE Directive

This appliance is marked according to the European Directive 2002/96/

EC on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly you will help prevent

potential negative consequences for the environment and human health,

which could otherwise be caused by inappropriate waste handling of this

product.

The symbol on the product indicates that this product may not be treated as

household waste. Instead it shall be handed over to the appliance collection point for

recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with the local environmental regulations

for waste disposal.

For more detailed information about treatment, recovery and recycling of this product,

please contact your local city ofce, your household waste disposal service or the

shop where you purchased the product.

Quality

BSI ISO 9001

Hoover’s factories have been independently assessed for quality. Our products are

made using a quality system which meets the requirements of ISO 9001

GUARANTEE STATEMENT

The guarantee conditions for this appliance are as defined by our representative

in the country in which it is sold. Details regarding these conditions can be

obtained from the dealer from whom the appliance was purchased. The bill of

sale or receipt must be produced when making any claim under the terms of this

guarantee.

USE ONLY HOOVER SPARES

CONSUMABLES CODE

WASHABLE HEPA FILTER S109 35601063

EXHAUST MICROFILTER T103 35601062

AGITATOR Y21 35600743

BELT V29 35600744

SPARES CODE

HOSE D119 35601061

2 IN 1 TOOL DUST B 35601065

PET HAIR & ALLERGEN

REMOVER

J44 35601064

2 PIECE EXTENSION

TUBE

2PIECE T 35601060

- 8 -

48005513 spirit manual.indd 8 5/2/2012 11:37:13 AM

WARNING

A thermal cut out switches off the cleaner to prevent

overheating if it is used when full or there is a blockage or

dirty filters. If this should happen switch off, unplug and

correct the fault.

It will take approximately 30 minutes for the cut out to

automatically reset.

User checklist

If your cleaner is not working properly run through the

following checklist.

1. Is there a working electricity supply to the cleaner?

Check with another electrical product.

2. Is the dust container full or choked with fine dust?

To empty the dust container, see instructions on P6.

3. Is the hose blocked?

To clear a blockage, see instructions on P7.

4. Is there a blockage in the cleaner base?

To clear a blockage, see the instruction on P7.

5. Are the filters blocked?

To clean filters, see the instruction on P6.

6. Is the nozzle height set correctly?

To set the carpet height selector, see the instruction on p4.

7. Are the brushes rotating correctly?

To check the brushes, see the instructions on p7.

8. Has the cleaner overheated?

If so, it will take about 30 minutes to reset.

If there is any doubt, call the Hoover customer Helpline 08444 995 599 for

advice. They may be able to assist you over the telephone.

IMPORTANT

DO NOT RUN OVER THE POWER SUPPLY CORD

AS THIS COULD DAMAGE THE SUPPLY CORD

INSULATION.

- 9 -

48005513 spirit manual.indd 9 5/2/2012 11:37:13 AM

Hoover Limited

Pentrebach

Merthyr Tydfil

Mid Glamorgan

CF48 4TU

HOOVER CUSTOMER HELPLINE

08444 995 599

© 2012 48005513

®

48005513 spirit manual.indd 10 5/2/2012 11:37:13 AM