Hoover Velocity Evo Pets Bagless Upright Vacuum Cleaner VE01 Instruction Manual Product Code 39100499 AC UK

User Manual: Hoover Instruction Manual Velocity Evo VE01 - Vacuum Cleaner Help and Advice from Hoover

Open the PDF directly: View PDF .
Page Count: 9

Download
Open PDF In Browser	View PDF

USER MANUAl

GB

IMPORTANT SAFETY REMINDERS

aerosols or their vapours.

This appliance should only be used for domestic cleaning, as
described in this user guide. Please ensure that this guide is
fully understood before operating the appliance.

Do not run over the power cord when using your appliance or
remove the plug by pulling on the power cord.

Do not leave the appliance plugged in. Always switch off and
remove the plug from the socket after use, or before cleaning
the appliance or any maintenance task.

Hoover service: To ensure the continued safe and efficient
operation of this appliance we recommend that any servicing
or repairs are only carried out by an authorised Hoover service
engineer.

Do not continue to use your appliance if it appears faulty.

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

Do not stand on or wrap the cord around arms or legs when
using your appliance.
Do not use the appliance to clean animals or people.
When using the cleaning tools, ensure to always steady the
appliance with your other hand. This will ensure that the
appliance does not fall while in use.

If the power cord is damaged stop using the appliance
immediately. To avoid a safety hazard, an authorised Hoover
service engineer must replace the power cord.

This product contains magnetic material.Please contact
your doctor if you have any questions on whether this
might affect your implanted medical device.

Keep hands, feet, loose clothing and hair away from rotating
brushes.

Warning: a thermal cut out switches off the appliance to prevent overheating
if it is used when full or there is a blockage or dirty filters. If this should
happen then switch off, unplug and correct the fault. It will take approximately
45 minutes for the cut out to automatically reset.

Use only attachments, consumables or spares recommended
or supplied by Hoover.
When using cleaning tools ensure that the appliance is kept in
the upright (parked) position. This will avoid possible damage
to the carpet or floor covering. When cleaning stairs, do not
position the appliance above you.

The Environment

The symbol on this appliance indicates that this appliance may not
be treated as household waste. Instead it must be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed
information about treatment, recovery and recycling of this appliance, please
contact your local city office, your household and waste disposal service or
the shop where you purchased the appliance.

Static electricity: some carpets can cause a small build up of
static electricity. Any static discharge is not hazardous to health.
Do not use your appliance out of doors or on any wet surface
or for wet pick up.

This appliance complies with the European Directives 2014/35/EU,
2014/30/EU and 2011/65/EU.

Do not pick up hard or sharp objects, matches, hot ashes,
cigarette ends or other similar items.
Do not spray with or pick up flammable liquids, cleaning fluids,

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio
(MB) Italy

-1
2-

GB
HOSE TO
EXTENSION

GETTING TO KNOW YOUR CLEANER

Effortless
cleaning
with your
new Hoover

LOOP HANDLE*

Brush BAR switch
METAL TUBE

Pre-motor
filter

BIN RELEASE
BUTTON
BIN HANDLE

Main power
On/Off switch

MINI TURBO NOZZLE*

Extension HOSE*

DUST BIN
2In 1 DUSTING
&CREVICE TOOL

Extension TUBE*
LONG CREVICE TOOL*

EXTENSION
HOSE SOCKET

EXHAUST
FILTER GRILLE

NOZZLE
Wheels

exhaust filter
* Certain models only

-2-

2 wiper blades

GB

PREPARING YOUR CLEANER

SWITCH

Insert the main handle in the
cleaner body and then adjust
handle up/down to the desired
height.

1.Main power On/Off switch
Press the ON/OFF switch to
operate the cleaner.
2
1

SUPPLY CORD
Do not run over the supply cord.
Clip the supply cord in the cord
clip at the back of the handle
to avoid accidentally running
the cleaner over the cord and
causing any damage.

2.Brush Bar Switch
Press the brush bar on/off
button at the top of the unit.
Brush Bar ON - recommended
for carpets.
Brush Bar OFF - suitable for
hard floors.

Cleaner release
recline to unlock the cleaner.

MINI TURBO BRUSH assembly*
Assemble the mini turbo brush
holder to the handle tube of
the cleaner,then put the mini
turbo nozzle to the holder.

put 2-in-1 tool and crevice tool
on board storage area.

* Certain models only

-3-

This vacuum cleaner features Intellicare
technology which helps to protect your carpet
from unnecessary wear. When you stop moving
the cleaner, the nozzle power will be automatically
cut off. You can still use on hose mode with
accessories. When the cleaner is moved, the
power nozzle automatically reverts back to full
power.*

twist the handle to manoeuvre under or around
furniture.*

GB

WIPER BLADE ASSEMBLY

connecting accessory to handle tube
1

To obtain the best performance and energy
efficiency#1 ,it is recommended to assemble the front
and back wiper blade to the soleplate of the nozzle.

Remove handle tube.

2

connect hose to handle tube.
connect accessory to the handle tube.

1

1 Grip the inserted side of the wiper blade and slide along
the slot until the wiper blade is fully located.

2
1

2
2 To reduce the push force on the cleaner, you can
remove the wiper blade. Lift one end of the wiper blade
and slide along the slot till fully out.
3 To get a lower push force on the nozzle,you can
disassemble the wiper blade.
lift the end of the wiper blade and pull it out.

2

IMPORTANT! When using cleaning tools, the cleaner must
be kept in the upright position, particularly when cleaning
stairs. Hold unit while using hose or handle tube.

1

#1 Note: Dust pick up ability carpet, dust pick up
ability hard floor, and energy efficiency in accord
with Commission Regulations (EU) 665/2013 and
(EU) 666/2013.

CLEANING THE STAIRS
It is dangerous to place the cleaner
above you when cleaning stairs.

IMPORTANT! This vacuum cleaner is supplied with an Energy Label as
required by European Regulation (EU) 665/2013. If the label shows a
red prohibition circle on the right covering the hard floor symbol, then this
indicates that the vacuum cleaner is not suitable for use on hard floors.

CLEANING TOOLS

Ensure it is always operated in an
upright position.

1

All accessories can be fitted directly onto the hose, handle and handle tube. Combine
2
accessories depending on use.

STORING THE CLEANER

Mini Turbo Nozzle*: ideal for removing pet hairs.
DO NOT touch the rotating brush.
Parquet Nozzle*: ideal for cleaning delicate surfaces.

Turn the cleaner off and remove the plug from the socket.
Wind the power cord around the cord storage hooks.

Connecting Accessory to Hose
1

Plug in the long stretch hose in
the hose socket.

* Certain models only

2

choose your accessory.
connecting accessory to hose.

-4-

GB

EMPTYING THE Bin
!

IMPORTANT: before emptying the bin, make
sure vacuum cleaner has been switched off.

CLEANING THE PRE MOTOR FILTERS
1

3

Rotate the upper part of the dust bin to open.

gently tap both filters to release
any excess dust.

2

Take out the pre motor filter and the separation
unit from the dust bin. clean excess debris from the
separation unit and refit.

4

Wash both filter and sponge under warm water until
the water runs clean. Remove excess water by
shaking and leave to dry for 24 hours. Reassemble
and refit filters to cleaner, only when they are
completely dry.

<40

1

To remove the bin from the cleaner press the
bin release button.

2

Hold the container over the bin and press the
easy open button.
The container release flap will open and you
can empty the debris into the waste bin with
no dust contact.

43 Once emptied, gently tap or shake the container
to release any excess dust.
Do not overfill the bin above the max level line.

CLeaning the exhaust
<40 filter
1 remove the exhaust grille by pressing the button.
2 remove the exhaust filter by pressing the latch on both
sides.
3

The exhaust filter should be washed every month.
Remove the exhaust filter from your cleaner and wash
with lukewarm water.

<40
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.

-5-

<40

GB

CHANGING THE BELT OR BRUSHES

CLEARING A BLOCKAGE

If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first
please make sure you have:
IMPORTANT: Switch the cleaner off and
• Emptied the bin
remove the plug from the electricity supply
• Cleaned the filters
before attempting any maintenance.
• Checked for blockages
1

2

3

Turn the cleaner over and remove 2 rear
rollers and 2 retaining screws.

Remove the brush guard.

Remove brush assembly and check for
wear on the belt.
Loop the new belt around the
motor and brush channel.

4

5

6

Hold the brush assembly and stretch the
belt until the brush can be slotted back
into the cleaner housing.

Check the cleaning
tools and hose for
blockages.

The hose can be
removed at both ends.

Rotate the brush to ensure free movement
of the belt.

Turn the cleaner
over and rotate the
brushes to identify
any obstructions
including hair.

Refit the brush guard with 2 retaining screws
and 2 rear rollers..

Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.

NOTE: when the brush was blocked and stopped rotating,switch off and remove the plug from
the electricity supply,then use a pair of scissors to cut through any threads or hairs caught
around the brush. Reassemble the brush and brush guard.

-6-

Removing a blockage from
the mini turbo nozzle.
Open the nozzle at each
side,lift cover and remove
the blockage.

*Certain models only

GB

Important information

User checklist
If your cleaner is not working properly run through the
following checklist.
1. Is there a working electricity supply to the cleaner?
Check with another electrical product.
2. Is the bin full or choked with fine dust?
To empty the bin, see the User Manual on P6.
3. Is the hose blocked?
To clear a blockage, see the User Manual on P7.
4. Is there a blockage in the cleaner base?
To clear a blockage, see the User Manual on P7.
5. Are the filters blocked?
To clean filters, see the the Manual on P6.
6. Are the brushes rotating correctly?
To check the brushes, see the User Manual on p7.
7. Has the cleaner overheated?
If so, it will take about 45 minutes to reset.

Hoover Service
Should you require service at any time, please contact your local Hoover Service
Office.
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your
local Hoover dealer or direct from Hoover. When ordering parts always quote
your model number.

Quality

Hoover’s factories have been independently assessed for quality. Our products
are made using a quality system which meets the requirements of ISO 9001

If there is any doubt call the Hoover Service Office for advice. They may be able
to assist you over the telephone. A service charge will be made if the cleaner is
examined and found to be in working order, has not been assembled in accordance
with these instructions or has been used incorrectly.

GUARANTEE STATEMENT

The guarantee conditions for this appliance are as defined by our representative in
the country in which it is sold. Details regarding these conditions can be obtained
from the dealer from whom the appliance was purchased. The bill of sale or receipt
must be produced when making any claim under the terms of this guarantee.
Subject to change without notice.

WARNING! A thermal cut out switches off the cleaner to prevent overheating if it is
used when full or there is a blockage or dirty filters. If this should happen switch off,
unplug and correct the fault.
It will take about 45 minutes for the cut out to automatically reset.

IMPORTANT: Do not run cleaner over the power cord as this could damage the
power cord insulation.

-7-

PRINTED IN P.R.C.
48023605



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
Create Date                     : 2017:08:04 10:10:16+08:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2018:04:16 02:00:56+01:00
Producer                        : Adobe PDF Library 9.9; modified using iTextSharp™ 5.5.12 ©2000-2017 iText Group NV (AGPL-version)
Trapped                         : False
Author                          : Hoover Candy Group
Title                           : Hoover Velocity Evo Pets Bagless Upright Vacuum Cleaner VE01 Instruction Manual - Product Code 39100499
Subject                         : Download the PDF user manual for your Velocity Evo Pets Bagless Upright Vacuum Cleaner VE01 directly from the manufacturer, Hoover

EXIF Metadata provided by EXIF.tools