Horizon Fitness Fs 50 Users Manual

fs50rev10indd182007115735am e76a4c07-9a40-4b29-8342-0e90f774ee87 Horizon Fitness Home Gym FS 50 REV 1.0 1 8/20/07 11:57:35 AM User Guide |

2015-02-04

: Horizon-Fitness Horizon-Fitness-Fs-50-Users-Manual-368750 horizon-fitness-fs-50-users-manual-368750 horizon-fitness pdf

Open the PDF directly: View PDF PDF.
Page Count: 15

HOME GYM ASSEMBLY
AND USER’S GUIDE
FOR MODEL :
FS 50
FS 50 rev 1.0.indd 1 8/20/07 11:57:35 AM
3
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
CONGRATULATIONS and THANK YOU for your purchase of this Horizon home gym!
Whether your goal is to tone your muscles, increase your strength or simply enjoy a fuller, healthier
lifestyle, a Horizon home gym can help you attain it – adding club-quality performance to your at-home
workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster.
Because we're committed to designing fitness equipment from the inside out, we use only the highest
quality components. It's a commitment we back with one of the strongest warranty packages in the
industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
A Horizon home gym delivers.
INTRODUCTION
Important Precautions
Assembly
Before You Begin
Conditioning Guidelines
Troubleshooting & Maintenance
Limited Warranty
CONTACT INFORMATION
4
5
17
18
24
26
Back Panel
TABLE OF CONTENTS
FS 50 rev 1.0.indd 2-3 8/20/07 11:57:36 AM
4
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
5
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using this home gym. Basic precautions should always be followed, including the
following: Read all instructions before using this home gym. It is the responsibility of the owner to ensure that
all users of this home gym are adequately informed of all warnings and precautions. If you have any questions
after reading this manual, contact customer service at the number listed on the back cover of this manual.
TO REDUCE THE RISK OF INjURY TO PERSONS:
WARNING
Close supervision is necessary when this home gym is used by, on, or near children, invalids, or disabled persons.
Use this appliance (or home gym) only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
Never drop or insert any object into any opening.
If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath,
stop exercising immediately and consult your physician before continuing.
Do not wear clothes that might catch on any part of the home gym.
Always wear athletic shoes while using this equipment.
Do not jump on the home gym.
At no time should more than one person be on home gym while in operation.
The home gym should not be used by persons weighing more than 300 pounds. Failure to comply will void the
warranty.
The home gym is intended for in-home use only. Do not use this home gym in any commercial, rental, school or
institutional setting. Failure to comply will void the warranty.
Do not use outdoors.
•
•
•
•
•
•
•
•
•
•
•
At NO time should pets or children under the age of 12 be closer to the home gym than 10 feet.
At NO time should children under the age of 12 use the home gym.
Children over the age of 12 should not use the home gym without adult supervision.
FOR HOUSEHOLD USE ONLY
ASSEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
During the assembly process there are several areas that special attention must be paid. It is very important
to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly
instructions are not followed correctly, the home gym could have frame parts that are not tightened and will
seem loose and may cause irritating noises. There should be no side-to-side play in the frame uprights. If
there is any play in these areas, the home gym has not been properly assembled. To prevent damage to the
home gym, the assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the unit where it will be used. Place the home gym carton on a level flat surface. It is recommended
that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit.
Never open box when it is on its side.FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
Before proceeding, find your home gym’s serial number
and model name located on the left rear side of the base
frame and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER :
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
FS 50 rev 1.0.indd 4-5 8/20/07 11:57:38 AM
6
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
7
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
TOOLS INCLUDED
PARTS INCLUDED
1 Seat Assembly Safety Pin
2 Foam Rollers
1 Seat Back Cushion
1 Main Base Frame
1 Main Support Frame (Right)
1 Main Support Frame (Left)
1 Radial Arm Assembly
1 Center Upright
1 Seat Assembly
3 Weight Shields
2 Guide Rods
1 Weight Selection Pin
1 Upper Pulley Bracket
1 Dual Floating Pulley Bracket
1 Single Floating Pulley Bracket
1 Upper Pulley Assembly
(Multiple Pulleys)
3 Cables
LAT PULLDOWN BAR
LAT BAR BRACKET ASSEMBLY
MAIN SUPPORT FRAME (RIGHT)
CENTER SUPPORT FRAME
CABLE “C”
RADIAL ARM ADJUSTMENT PIN
SEAT BACK PAD
SEAT BOTTOM PAD
SEAT ASSEMBLY
SEAT HEIGHT ADJUSTMENT KNOB
FOAM LEGROLLERS
ADJUSTABLE FOOTPLATE CABLE “B”
BASE FRAME
SEAT ASSEMBLY SAFETY PIN
MAIN SUPPORT FRAME (LEFT)
SINGLE FLOATING PULLEY BRACKET
WEIGHT SELECTION PIN
WEIGHT SHIELD
DUAL FLOATING PULLEY BRACKET
GUIDE ROD
UPPER PULLEY ASSEMBLY
RADIAL ARM ASSEMBLY
CABLE “A”
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
Screwdriver
19 mm Flat Wrench
13 mm/17 mm Flat Wrench
4 mm Allen Wrench
6 mm Allen Wrench
8 mm Allen Wrench
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
PRE-ASSEMBLY
ASSEMBLY STEP 1
BASE FRAME
MAIN SUPPORT
FRAME (RIGHT)
MAIN SUPPORT
FRAME (LEFT)
NYLON NUT (C)
FLAT WASHER (B)
CENTER SUPPORT
FRAME
Place BASE FRAME on floor in
desired location.
Remove 6 NYLON NUTS (C)
and 6 FLAT WASHERS (B) from
BASE FRAME.
Attach RIGHT MAIN SUPPORT
FRAME to right side of BASE
FRAME using 2 BOLTS (A),
2 FLAT WASHERS (B) and 2
NYLON NUTS (C).
Repeat on other side.
Attach CENTER SUPPORT
FRAME to BASE FRAME using
2 BOLTS (A), 2 FLAT WASHERS
(B) and 2 NYLON NUTS (C).
A
B
C
D
E
FS 50 rev 1.0.indd 6-7 8/20/07 11:57:41 AM
8
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY STEP 2
NYLON NUT (C)
Qty: 6
FLAT WASHER (B)
Qty: 12
BOLT (A)
Qty: 4
BOLT (D)
Qty: 2
SUPPORT PLATE
Qty: 2
HARDWARE BAG 1 CONTENTS :
LAT BAR
BRACKET ASSEMBLY
UPPER PULLEY ASSEMBLY
FLAT WASHER (B)
NYLON NUT (C)
FLAT WASHER (B)
BOLT (A)
FLAT WASHER (B)
BOLT (D)
FLAT WASHER (B)
NYLON NUT (C)
SUPPORT PLATE
LEFT SUPPORT
FRAME
RIGHT
SUPPORT
FRAME
CENTER
SUPPORT
FRAME
ASSEMBLY STEP 3
HARDWARE BAG 2 CONTENTS :
RADIAL ARM ASSEMBLY
NYLON NUT (C)
FLAT WASHER (B)
FLAT WASHER (B)
BOLT (A)
SEAT WELDMENT SET
FRONT COVER
CENTER SUPPORT FRAME
BACK COVER
SCREW (F)
RADIAL ARM ASSEMBLY
STOPPER
STEP 3-D: INSTALLING THE STOPPER:
Open HARDWARE BAG 1.
Attach UPPER PULLEY
ASSEMBLY to CENTER
SUPPORT FRAME using 2
BOLTS (D), 4 FLAT WASHERS
(B) and 2 NYLON NUTS (C).
Tighten this hardware.
Position LAT BAR BRACKET
ASSEMBLY in line with the
UPPER PULLEY ASSEMBLY
and the LEFT SUPPORT
FRAME and RIGHT SUPPORT
FRAME as shown. Using 4
BOLTS (A), 8 FLAT WASHERS
(B) and 4 NYLON NUTS (C)
attach SUPPORT PLATES, LAT
BAR BRACKET ASSEMBLY and
UPPER PULLEY ASSEMBLY to
the LEFT SUPPORT FRAME and
RIGHT SUPPORT FRAME as
shown.
A
B
C
Open HARDWARE BAG 2.
Attach SEAT WELDMENT SET.
Attach COVER to bolted joint using 4 SCREWS (F).
Remove STOPPER from front side of RADIAL ARM ASSEMBLY and reinstall on back side of
RADIAL ARM ASSMBLY.
Attach RADIAL ARM ASSEMBLY to CENTER SUPPORT FRAME using 2 BOLTS (A), 4 FLAT
WASHERS (B) and 2 NYLON NUTS (C).
A
B
C
D
E
FS 50 rev 1.0.indd 8-9 8/20/07 11:57:45 AM
10
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
Open HARDWARE BAG 3.
Attach LEG ExTENSION/CURL DOWN TUBE to SEAT ASSEMBLY using 1 BOLT (G), 2 FLAT
WASHERS (B) and 1 NYLON NUT (C).
NOTE: Position the LEG ExTENSION/CURL DOWN TUBE so the cable attachment is facing
the gym.
Insert SEAT SET SAFETY PIN.
A
B
C
ASSEMBLY STEP 4
NYLON NUT (C)
Qty: 1
FLAT WASHER (B)
Qty: 2
BOLT (G)
Qty: 1
HARDWARE BAG 3 CONTENTS :
SEAT SET SAFETY PIN
FLAT WASHER (B)
NYLON NUT (C)
CENTER SUPPORT FRAME
SEAT WELDMENT SET
BOLT (G)
FLAT WASHER (B)
LEG EXTENSION/
CURL DOWN TUBE
CABLE ATTACHMENT
ASSEMBLY STEP 5
FLAT WASHER (B)
Qty: 6
BOLT (H)
Qty: 2
BOLT (L)
Qty: 2
NYLON NUT (C)
Qty: 2
HARDWARE BAG 4 CONTENTS :
END COVER
FOAM ROLLER
LEG EXTENSION/
CURL DOWN TUBE
SEAT BOTTOM PAD
CENTER SUPPORT FRAME
SEAT BACK PAD FLAT WASHER (B)
SCREW (H)
FLAT WASHER (B)
NYLON NUT (C)
ADJUSTMENT BAR
BOLT (L)
Open HARDWARE BAG 4.
Attach SEAT BACK PAD to CENTER SUPPORT FRAME using 2 SCREWS (H), 2 FLAT
WASHERS (B).
Attach SEAT BOTTOM PAD to SEAT WELDMENT using 2 BOLTS (D), 4 FLAT WASHERS (B)
and 2 NYLON NUTS (C).
Install assembled seat into gym.
Install LEG PADS to LEG ExTENSION/CURL DOWN TUBE as shown in diagram.
A
B
C
D
E
FS 50 rev 1.0.indd 10-11 8/20/07 11:57:49 AM
12
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
13
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
Open HARDWARE BAG 5.
Install 2 BOLTS (I), 4 FLAT WASHERS (j) and 2 NYLON NUTS (K) into the BASE FRAME as
shown in diagram.
Insert each GUIDE ROD into the BASE FRAME as shown in diagram.
Install rubber BUMPER onto each GUIDE ROD.
Install each WEIGHT PLATE onto GUIDE RODS
NOTE: Ensure that each WEIGHT PLATE’s selector pin slot faces downward.
Insert each GUIDE ROD into the corresponding hole in the UPPER PULLEY ASSEMBLY.
Secure GUIDE RODS in UPPER PULLEY ASSEMBLY using 2 BOLTS (I), 4 FLAT WASHERS (j)
and 2 NYLON NUTS (K).
NOTE: Ensure that each bolt is inserted through the hole at the top of the GUIDE ROD.
Tighten all hardware.
A
B
C
D
E
F
G
H
ASSEMBLY STEP 6
FLAT WASHER (J)
Qty: 8
NYLON NUT (K)
Qty: 4
BUMPER
Qty: 2
BOLT (I)
Qty: 4
HARDWARE BAG 5 CONTENTS :
BUMPER
GUIDE ROD
WEIGHT PLATES
TOP WEIGHT PLATE
BAYONET
SELECTOR PIN
NYLON NUT (K)
FLAT WASHER (J)
UPPER PULLEY
ASSEMBLY
FLAT WASHER (J)
BOLT (I)
FLAT WASHER (J)
FLAT WASHER (J)
NYLON NUT (K) BOLT (I)
BASE FRAME
Open HARDWARE BAG 6.
Remove nylon nut and threaded
screw from end of CABLE A.
Insert cable end into LAT BAR
BRACKET ASSEMBLY pulley as
shown in diagram.
NOTE: After passing through
first pulley bracket, thread
cable through DUAL FLOATING
PULLEY BRACKET then thread
back into LAT BAR BRACKET
ASSEMBLY.
Re-install threaded screw and
nylon nut before threading
cable into TOP WEIGHT PLATE.
NOTE: Always maintain at least
½˝ of weight cable screw in
TOP WEIGHT PLATE for saftey.
Screw the other end of CABLE A
into SINGLE FLOATING PULLEY.
Remove nylon nut and threaded
screw from end of CABLE B.
Insert cable end into BASE
FRAME pulleys as shown in
diagram.
NOTE: After passing through
first pulley bracket, thread
cable through DUAL FLOATING
PULLEY BRACKET.
After CABLE B routing is
complete replace threaded
end and nut onto cable end,
and install SINGLE FLOATING
PULLEY.
Attach CABLE B to LEG
ExTENSION/CURL ARM CABLE.
A
B
C
D
E
F
G
H
I
ASSEMBLY STEP 7
CABLE A
Qty: 1
CABLE B
Qty: 1
HARDWARE BAG 6 CONTENTS :
DUAL FLOATING
PULLEY BRACKET
SINGLE FLOATING
PULLEY BRACKET
CABLE A
SCREW AND NUT
LEG EXTENSION/
CURL ARM CABLE
TOP WEIGHT
PLATE
CABLE B
CABLE A
CABLE A
SINGLE FLOATING
PULLEY BRACKET
FS 50 rev 1.0.indd 12-13 8/20/07 11:57:54 AM
14
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
15
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
Open HARDWARE BAG 7.
Remove NYLON NUT, FLAT WASHER, THREADED SCREW and BALL from end of CABLE C.
Route CABLE C through the pulley system in the RADIAL ARM ASSEMBLY as shown in
diagram.
NOTE: After threading through one arm of RADIAL ARM ASSEMBLY thread CABLE C up
through SINGLE FLOATING PULLEY BRACKET before bringing to back through other arm.
After CABLE C routing is complete replace nylon nut, threaded screw and ball on end of
cable.
Hook HANDLES on to cable using the 2 HOOKS.
A
B
C
D
E
ASSEMBLY STEP 8
CABLE C
Qty: 1
HARDWARE BAG 7 CONTENTS :
BALL
NYLON NUT
FLAT WASHER
HANDLE
HANDLE
HOOK
CLEVIS
FLAT WASHER (B)
SCREW (E)
SINGLE FLOATING
PULLEY BRACKET
CABLE C
Open HARDWARE BAG 8.
Remove nylon nut, threaded screw and ball from end of CABLE D.
Route CABLE D through the pulley system in the UPPER PULLEY BRACKET ASSEMBLY as
shown in diagram.
After CABLE D routing is complete replace nylon nut, threaded screw and ball on end of
cable.
A
B
C
D
ASSEMBLY STEP 9
CABLE D
Qty: 1
HARDWARE BAG 8 CONTENTS :
BALL
NYLON NUT
FLAT WASHER
HOOK
CLEVIS
FLAT WASHER (B)
CABLE (D)
LAT BAR
SCREW (E)
FS 50 rev 1.0.indd 14-15 8/20/07 11:58:00 AM
16
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
17
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
YOU’RE FINISHED!
Open HARDWARE BAG 9.
Install WEIGHT SHIELD as shown in diagram, using 8 SCREWS (L) and 8 FLAT WASHERS
(M).
A
B
ASSEMBLY STEP 10
FLAT WASHER (M)
Qty: 8
SCREW (L)
Qty: 8
HARDWARE BAG 9 CONTENTS :
RIGHT SHIELD
SCREW (L)
FLAT WASHER (M)
LEFT SHIELD
BEFORE YOU BEGIN
CONGRATULATIONS! on choosing your home gym. You’ve taken an important step in developing
and sustaining an exercise program! Your home gym is a tremendously effective tool for achieving your
personal fitness goals. Regular use of your home gym can improve the quality of your life in so many
ways.
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
• Improved Muscle Tone and Strength
• Increased Daily Energy Levels
• A Healthier Heart
• Weight Loss
The key to reaping these benefits is to develop an exercise habit. Your new home gym will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your home gym in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
LOCATION OF THE HOME GYM
Place the home gym on a level surface. There should be 1 foot of
clearance behind the home gym, 3 feet on each side and 3 feet in front.
Do not place the home gym in any area that will block any vent or air
openings. The home gym should not be located outdoors.
3 feet
Front
3 feet
3 feet
Back
1 foot
SEAT ASSEMBLY PIN
Ensure that the seat assermbly safety pin is fully inserted before using the home
gym. Failure to do so may result in injury!.
WARNING
PROPER USAGE
Make sure to follow the MAINTENANCE schedule in this manual. Stop your workout immediately if you feel pain,
faint, dizzy or are short of breath.
Do not operate the home gym if there is any noticable damage to the cables
or pulleys. If any damage is noticable, contact customer tech support at the
number located on the back panel of this manual.
WARNING
FS 50 rev 1.0.indd 16-17 8/20/07 11:58:03 AM
18
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
19
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
HOW OFTEN? (Frequency of Workouts)
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain fitness.
If you have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise.
Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make exercise a lifetime habit.
Many people are successful staying with a fitness program if they set aside a specific time of day to exercise.
It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while watching the evening
news. What’s more important is that it’s a time that allows you to keep a schedule, and a time when you won’t
be interrupted. To be successful with your fitness program, you have to make it a priority in your life. So decide
on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as 5 minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective.
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your home gym to prepare for a 5K run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term goals,
always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (using the grip
pulse handlebars or a wireless chest transmitter - may be sold separately), and the second is by evaluating your
perceived exertion level (this is simpler than it sounds!).
PERCEIVED ExERTION LEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
GENERAL STRENGTH TRAINING GUIDELINES
• It is recommended that you perform at least 5-10 minutes of cardiovascular exercise before beginning your
strength routine in order to warm the muscles, increase the heart rate, and prepare your body for strength
training.
• Always raise and lower the weight in a smooth, slow, and controlled motion.
• Try not to hold your breath during strength training exercises. It is recommended that you exhale as you raise
the weight and inhale as you lower the weight.
• It is recommended that each muscle group be allowed to rest 48 hours between strength training.
• Complete each strength routine with a few simple stretches to maintain flexibility, and allow your body to
cool-down after your session.
CONDITIONING GUIDELINES
What is Target Heart Rate Zone?
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ExAMPLE:
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Heart Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
TARGET HEART RATE ZONE CHART
100%
75%
60%
BEATS PER MINUTE
20 25 30 35 40 45 50 55 60 65
AGE
TARGET ZONE
120 117 114 111 108 10510299 97 93
150 146 143139135131128 124 120116
FS 50 rev 1.0.indd 18-19 8/20/07 11:58:04 AM
20
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
21
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
STRETCH FIRST
Before using your product, it is best to take a few minutes doing a few gentle stretching exercises.
Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into
each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to
bounce while doing these stretches.
1. STANDING CALF MUSCLE STRETCH
Stand near a wall with the toes of tour left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
2. STANDING QUADRICEPS STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
STRETCHING
TIPS
WARM UP
Always perform 10-15 minutes of aerobic activity before begining your strength training session. This
warm-up will limber your muscles and prepare them for more strenuous exercise. Make sure that you warm-
up on your product at a slow pace. The warm up should gradually increase your heart rate into your heart
rate training zone and increase core body temperature.
COOL DOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Your cool-down period should consist of repeating the stretching exercises listed above
to loosen and relax your muscles.
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle tone and/or strength? Reduce stress? Knowing what
your goals are will help you develop a more successful exercise program. Below are some common exercise
goals:
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve.
THE IMPORTANCE OF WARM UP & COOL DOWN
ACHIEVING YOUR FITNESS GOALS
TIPS
TIPS
FS 50 rev 1.0.indd 20-21 8/20/07 11:58:05 AM
22
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE LIMITED
WARRANTY
23
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
DAILY LOG SHEETS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
DATE SET 1
EXERCISE WEIGHT REPS
SET 2 SET 3
WEIGHT REPS WEIGHT REPS
FS 50 rev 1.0.indd 22-23 8/20/07 11:58:06 AM
24
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
25
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
Your home gym is designed to be reliable and easy to use. However, if you experience a problem, please reference
the troubleshooting guide listed below.
PROBLEM: The cables feel rough and are noisy during use.
SOLUTION: Verify the following:
IS THERE ANY NOTICABLE DAMAGE TO THE CABLES?
IF YES:
• Contact customer tech support and replace the cable(s).
IF NO:
• Verify that all cables are secured into the pulleys.
• Verify that the weight stack guiderods are lubricated with a spray or silicone gel lubricant.
• Verify that there is no excessive slack in the cables.
NOTE: If there is excessive slack adjust cable tension (see next page).
PROBLEM: Weight selector pin cannot be inserted.
SOLUTION: Verify the following:
ARE THE HOLES ALLIGNED THROUGH THE WEIGHT PLATE AND BAYONETTE?
IF YES:
• Verify that the selector pin isn’t bent or damaged.
IF NO:
• Adjust threaded bolt on top plate so that the holes in the bayonette align with the weight plate.
NOTE: Always maintain at least ½˝ of threaded bolt in bayonette.
TROUBLESHOOTING
If the above troubleshooting section does not remedy the problem, discontinue use.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for a technician to service your home gym they may need to ask detailed questions about the symptoms that are occurring.
Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your Horizon Fitness home gym functioning again!
MAINTENANCE
Cleanliness of your home gym and its operation environment will keep maintenance problems and service calls to a
minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Wipe upholstery, handgrips, bars, and frame (if needed) with a soap and water cleaning solution.
EVERY WEEK
• Lubricate guide rods with a spray or silicone gel lubricant.
• Inspect cable ends and cable insulation for damage.
EVERY MONTH - IMPORTANT!
• Inspect all frame bolts and tighten as needed.
ADjUSTING CABLE TENSION
Regularly check the cable tension of your home gym. If excessive slack
exists adjust cable tension by removing the pulley bolts and moving
one or both pulleys to the inner mounting position in the dual floating
pulley bracket and then reinstalling the pulley bolts. Cable tension
may also be adjusted using the threaded cable end on single pulley
bracket and weight stack Twist threaded end to adjust tension and
then tighten lock nut.
NOTE: Always maintain at least ½˝ of threaded bolt in bayonet.
CABLE SCREW
AND NUT
TWIST SCREW TO
ADJUST TENSION,
THEN TIGHTEN
LOCK NUT
SINGLE PULLEY
BRACKET THREAD
CABLE SCREW
AND NUT
TWIST SCREW TO
ADJUST TENSION,
THEN TIGHTEN
LOCK NUT WEIGHT PLATE
INNER
MOUNTING
POSITIONS
FS 50 rev 1.0.indd 24-25 8/20/07 11:58:06 AM
26
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN CONDITIONING
GUIDELINES TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
27
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
LIMITED HOME-USE WARRANTY (U.S. MODELS ONLY)
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in
workmanship and materials for the lifetime of the original
owner. (The frame is defined as the welded metal base of the
unit and does not include any parts that can be removed.).
WEIGHT CAPACITY = 300 LBS
PARTS • 5 YEARS
Horizon Fitness warrants all original parts for a period of
five years from the date of original purchase, so long as
the device remains in the possession of the original owner.
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair
of the device for a period of one year from the date of the
original purchase, so long as the device remains in the
possession of the original owner.
UPHOLSTERY • 90 DAYS
Horizon Fitness warrants the upholstry for a period of 90
days from the date of original purchase, so long as the
device remains in the possession of the original owner.
ExCLUSIONS AND LIMITATIONS
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or
defective part and is the sole remedy of the warranty.
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or
installation of parts or accessories not originally intended or
compatible with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of
paint or plastic, neglect, theft, vandalism, fire, flood, wind, lightning,
freezing, or other natural disasters of any kind, power reduction,
fluctuation or failure from whatever cause, unusual atmospheric
conditions, collision, introduction of foreign objects into the covered
unit, or modifications that are unauthorized or not recommended by
Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not
responsible or liable for indirect, special or consequential damages,
economic loss, loss of property, or profits, loss of enjoyment or use,
or other consequential damages of whatsoever nature in connection
with the purchase, use, repair or maintenance of the equipment.
• Equipment used for commercial purposes or any use other than a
single family or Household, unless endorsed by Horizon Fitness for
coverage.
• Equipment owned or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement
units or labor or other costs associated with removal or replacement
of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon
Fitness is not responsible or liable for any damage, loss or liability
arising from any personal injury incurred during the course of, or as
a result of any repair or attempted repair of your fitness equipment
by other than an authorized service technician. All repairs attempted
by you on your fitness equipment are undertaken AT YOUR OWN RISK
and Horizon Fitness shall have no liability for any injury to the person
or property arising from such repairs.
SERVICE/RETURNS
• In-home service is available within 150 miles of the nearest
authorized repair center (Mileage beyond 150 miles from an
authorized service center is the responsibility of the consumer).
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to
replacing or repairing, at Horizon Fitness’ option, the same or
comparable model at one of its authorized service centers.
• A Horizon Fitness authorized service center must receive all
equipment for which a warranty claim is made. This equipment must
be received with all freight and other transportation charges prepaid,
accompanied by sufficient proof of purchase.
• Replacement units, parts reconditioned to As-new Condition by
Horizon Fitness or its vendors may sometimes be supplied as
warranty replacement and constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may
vary from state to state.
FS 50 rev 1.0.indd 26-27 8/20/07 11:58:07 AM
For fast and friendly service, please contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1-800-244-4192
Email: comments@horizonfitness.com
Website: www.horizonfitness.com
Every employee at Horizon Fitness takes pride in providing you with a high quality product.
We want to know if you have a problem and we want to have an opportunity to correct it for you.
NOTE: Please read the TROUBLESHOOTING section before contacting Customer Tech Support.
To receive additional product information, visit us at www.horizonfitness.com
CUSTOMER TECH SUPPORT
Horizon FS 50. Rev. 1.0 | © 2006 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
1620 Landmark Drive,
Cottage Grove WI, 53527
Tel: 1.800.244.4192
Fax: 608.839.1260
FS 50 rev 1.0.indd 28 8/20/07 11:58:07 AM

Navigation menu