Horizon Hobby DAMTX11 2.4 GHz Transceiver User Manual X1TXO User Guide v2

Horizon Hobby, LLC 2.4 GHz Transceiver X1TXO User Guide v2

User manual

Download: Horizon Hobby DAMTX11 2.4 GHz Transceiver User Manual X1TXO User Guide v2
Mirror Download [FCC.gov]Horizon Hobby DAMTX11 2.4 GHz Transceiver User Manual X1TXO User Guide v2
Document ID1166229
Application IDJjzQ15dJ5bJxF2FzMRlCxA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.07kB (25864 bits)
Date Submitted2009-09-08 00:00:00
Date Available2009-09-08 00:00:00
Creation Date2009-08-20 07:36:27
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-08-20 07:36:27
Document TitleMicrosoft Word - X1TXO User Guide v2.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: DGuidotti

X1TXO 2.4GHz DSSS Module User Manual.
Horizon Hobby Inc.,
1173 Cygnet Trail
Bigfork MT 59911
(408) 203 4408
1. Features
•
•
•
•
•
•
•
•
•
•
•
•
2.4GHz Direct Sequence Spread Spectrum (DSSS) radio transceiver module.
Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band
Fully integrated power regulation with a wide input unregulated operating range
2.4 to 3.6V.
Fully integrated local oscillator and 12MHz 20ppm reference crystal
200mA operating current
Transmit power - 200mW EIRP
Receive sensitivity up to -95dBm
DSSS data rates up to 250kbps
1 mile operating range
Full packet assembling and disassembling
Auto transaction sequencer
Fully buffered digital interface with high voltage tolerant inputs
2. Pin description
Pin Number
10
11
12
Name
GND
VCE
VIN
P21
P33
P17
P32
GND
P30
XRES
P11
P10
Description
Module Ground
Power control monitoring
Module DC Power
Baseband CPU digital port P2.1
Baseband CPU digital port P3.3
Baseband CPU digital port P1.7
Baseband CPU digital port P3.2
Master in, slave out data
Baseband CPU digital port P3.0
Baseband CPU reset input
Baseband CPU digital port P1.1
Baseband CPU digital port P1.0
3. Specifications
Parameter
Storage Temp
VDD
Receive Sensitivity
Transmit power (conducted)
Transmit power (radiated)
Idle current
Receive current
Transmit current
Value
-65 to 105
2.4 to 3.6
-95
18
20
22
50
Units
Degrees Celsius
Volts
dBm
dBm MAX
dBm MAX
mA
mA
mA
5. Module User Requirements
5.1 This module must be integrated into a device where the user cannot access the
antenna connector.
5.2 Only a 2dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied Inpaq DAM00BM11500209 folded dipole
antenna.
5.3 The device must contain the following permanent labeling on the exterior of the
device as follows:
Contains FCC ID: BRWDAMTX11
5.4 The user manual of the device must contain the following paragraph:
FCC Information
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Information
This product contains a radio transmitter with wireless technology
which has been tested and found to be compliant with the applicable
regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz
frequency range.
The following countries associated regulatory agencies recognizing the
noted certifications for this product as authorized for sale and use are:
UK
FI
CZ
AT
NL
DE
EE
SK
IT
LU
DK
LV
HU
ES
MT
NO
LT
RO
PT
CY
SE
PL
SI
IE
GR
Caution:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
5.5 This module meets the requirements for a mobile device that may be used at
separation distances of more than 20cm from the human body. It may be used in handheld controllers that provide a separation distance of at least 5cm between the antenna
and the body (excluding hands/wrists). The instructions to the user for the host device
must include information requiring the product be used in a manner to ensure the
appropriate separation (20cm or 5cm) between antenna and body and requiring that the
transmitter not be collocated with another transmitting device.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - X1TXO User Guide v2.doc
Creator                         : DGuidotti
Create Date                     : 2009:08:20 07:36:27-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:08:20 07:36:27-07:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:a3501662-65a5-4c75-8436-a9fbc024a6d9
Instance ID                     : uuid:fc99d466-6667-4680-9ee6-18d8a60c102f
Page Count                      : 3
Author                          : DGuidotti
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BRWDAMTX11

Navigation menu