Horizon Hobby DAMTX12 2.4 GHz Transceiver Module User Manual X1TXP User Guide

Download:
Mirror Download [FCC.gov]
Document ID	2049365
Application ID	W0jcBFolwZJA/xIj8if+KA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.68kB (33501 bits)
Date Submitted	2013-08-20 00:00:00
Date Available	2013-08-20 00:00:00
Creation Date	2017-10-26 05:20:14
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 05:20:14
Document Title	Microsoft Word - X1TXP User Guide.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sara

X1TXP 2.4GHz DSSS Module User Manual.
Horizon Hobby Inc.,
4105 Fieldstone Rd
Champaign, IL 61822
(408) 203 4408
1. Features
 2.4GHz Direct Sequence Spread Spectrum (DSSS) radio transceiver module.
 Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band
 Fully integrated power regulation with a wide input unregulated operating range 3V to
10V.
 Fully integrated local oscillator and 12MHz 20ppm reference crystal
 200mA operating current
 Transmit power - 100mW EIRP
 Receive sensitivity up to -95dBm
 DSSS data rates up to 250kbps
 1 mile operating range
 Full packet assembling and disassembling
 Auto transaction sequencer
 Fully buffered digital interface with high voltage tolerant inputs
2. Pin description
Pin Number
10
11
12
Name
GND
VCE
VIN
P21
P33
P17
P32
GND
P30
XRES
P11
P10
Description
Module Ground
Power control monitoring
Module DC Power
Baseband CPU digital port P2.1
Baseband CPU digital port P3.3
Baseband CPU digital port P1.7
Baseband CPU digital port P3.2
Module Ground
Baseband CPU digital port P3.0
Baseband CPU reset input
Baseband CPU digital port P1.1
Baseband CPU digital port P1.0
Page 1 of 4
3. Specifications
Parameter
Storage Temp
VDD
Receive Sensitivity
Transmit power (conducted)
Transmit power (radiated)
Idle current
Receive current
Transmit current
Value
-65 to 105
2.4 to 3.6
-95
18.5
20
22
200
Units
Degrees Celsius
Volts
dBm
dBm MAX
dBm MAX
mA
mA
mA
4. Module User Requirements
4.1 This module must be integrated into a device where the user cannot access the antenna
connector.
4.2 Only a 2.0dBi antenna can be used with this module. The antenna must meet and not exceed
the gain and pattern of the supplied folded dipole antenna.
4.3 The device must contain the following permanent labeling on the exterior of the device as
follows:
Contains FCC ID: BRWDAMTX12
4.4 The user manual of the device must contain the following paragraph:
Page 2 of 4
FCC Information
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
CE Information
This product contains a radio transmitter with wireless technology
which has been tested and found to be compliant with the applicable
regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz
frequency range.
The following countries associated regulatory agencies recognizing the
noted certifications for this product as authorized for sale and use are:
UK
DE
DK
NO
SE
FI
EE
LV
LT
PL
Page 3 of 4
4.5 This module meets the requirements for a mobile device that may be used at separation
distances of more than 20cm from the human body. It may be used in hand-held controllers that
provide a separation distance of at least 5cm between the antenna and the body (excluding
hands/wrists). The instructions to the user for the host device must include information requiring
the product be used in a manner to ensure the appropriate separation (20cm or 5cm) between
antenna and body and requiring that the transmitter not be collocated with another transm
Page 4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : sara
Create Date                     : 2013:08:08 13:07:10-07:00
Modify Date                     : 2013:08:20 14:31:21-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - X1TXP User Guide.doc
Creator                         : sara
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:08:20 14:31:21-07:00
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Document ID                     : uuid:916643a2-12d6-4c11-9aa7-fa5fd82b0021
Instance ID                     : uuid:c9918c61-1e5c-4985-91c1-1c807196e9f6
Page Count                      : 4

EXIF Metadata provided by EXIF.tools