Horizon Hobby LSR-2000 Losi AM27MHz User Manual English

Download:
Mirror Download [FCC.gov]
Document ID	1517883
Application ID	Ol+F0Yr8CvnhChfkt3ZeYQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	89.14kB (1114196 bits)
Date Submitted	2011-08-05 00:00:00
Date Available	2011-08-05 00:00:00
Creation Date	2011-08-03 10:49:00
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-08-03 10:49:00
Document Title	Microsoft Word - User Manual_English.rtf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Vincent

User Manual
Replacement Parts for Micro Rally
LOSB0817 Servo w/Servo Saver: Micro SCT, Rally
LOSB0843 AM Receiver/ESC Unit: Micro SCT, Rally
LOSB0846 4.8V 220mAh NiMH Pack: MC SCT, Rally
LOSB0879 Micro Wall Charger NiMH: Micro SCT, Rally
LOSB1523 Wheel Nuts
LOSB1584 Tires, Mounted, Black: Micro Rally
LOSB1586 Tires, Mounted, Gold: Micro Rally
LOSB1730 Bearing Set: Micro SCT, Rally
LOSB1740 Chassis Set: Micro SCT, Rally
LOSB1741 Suspension Arm Set: Micro SCT, Rally
LOSB1742 Spindles, Carriers, Hubs: Micro SCT, Rally
LOSB1743 Diff Covers & Shock Towers: Micro SCT, Rally
LOSB1744 Steering & Servo Saver Hardware: Micro SCT, Rally
LOSB1746 Bumper Set: Micro Rally
LOSB1747 Side Bumpers & Mounts: Micro SCT, Rally
LOSB1748 Main Drive Shaft & Hardware: Micro SCT, Rally
LOSB1749 Hinge Pin Kit: Micro SCT, Rally
LOSB1751 Motor: Micro SCT & Rally
LOSB1752 Pinion & Spur Set: Micro SCT, Rally
LOSB1754 Complete Front Gearbox: Micro SCT, Rally
LOSB1755 Complete Rear Gearbox: Micro SCT, Rally
LOSB1757 Diff Outdrive Set: Micro SCT, Rally
LOSB1758 Dogbone Set: Micro SCT, Rally
LOSB1759 Axle Set: Micro SCT, Rally
LOSB1760 Ring & Pinion Gear Set: Micro SCT, Rally
LOSB1762 Oil Filled Damper (Shock) Set: Micro SCT, Rally
LOSB1763 Damper Spring Set, Hard (4): Micro SCT, Rally
LOSB1764 Screw Set: Micro SCT, Rally
LOSB1786 1/24 4WD Rally Painted Body, Gray
LOSB1787 1/24 4WD Rally Painted Body, Orange
LOSB1788 1/24 4WD Rally Painted Body, Red
LOSB1789 1/24 4WD Rally Painted Body, Blue
LOSB1798 Micro Rally Decal Sheet Set
LOSB4605 Wrench Set: Micro SCT, Rally
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, Inc. For up-to-date product literature, visit
http://WWW.LOSI.COM/SUPPORT.
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property
damage AND a little or no possibility of injury.
Option Parts
LOSB1765 Damper Spring, Soft (4): Micro SCT, Rally
LOSB1766 Damper Spring, Medium (4): Micro SCT, Rally
LOSB1785 Micro Rally Body, Clear
LOSB9635 LiPo Charger & 7.4V 205mAh LiPo Battery Combo
LOSB9825 7.4V 250mAh LiPo: Micro SCT, Rally
WARNING: Procedures, which if not properly followed, create the probability of property
damage, collateral damage, and serious injury OR create a high probability of
superficial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the
product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and
requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could
result in injury or damage to the product or other property. This product is not intended for use by children
without direct adult supervision. Do not attempt disassemble, use with incompatible components or augment
product in any way without the approval of Horizon Hobby, Inc. This manual contains instructions for safety,
WWW.LOSI.COM
operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to
assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
©2010 Losi, a Division of Horizon Hobby, Inc.
800-0433
Printed 05/10 28514
Operations Guide
Introduction
1.
Push and Slide
Thank you for choosing the 1/24 Micro 4WD Rally Car. This guide contains the basic instructions for operating
the vehicle. Read all of the instructions and all accompanying printed material in order to operate your model
correctly and avoid unnecessary damage. Please take a moment to look them over before running your model.
Open
DO NOT RUN YOUR MICRO 4WD RALLY CAR ON PLUSH CARPET, GRASS OR SAND.
NOTICE: Although the best materials and components are used, and due to the size of this
model, using anything other than genuine Losi replacement and performance parts specifically designed for the Losi Micro 4WD Rally Car could cause damage.
CONNECT - REGISTER - WIN
Register your product online so we can notify you about the latest option parts, product updates, tech tips,
service bulletins and more. Visit WWW.LOSI.COM and follow the Product Registration link to stay connected.
For registering your Losi Product you will be automatically entered for a chance to win the
Losi Pick Your Prize Sweepstakes. The winner will be allowed to select a total prize package of
$1,000 (retail value) based on their preference.
WWW.LOSI.COM/REGISTER
Safety Guidelines and Warnings
Age Recommendation: 14 years or over. This is not a toy. This product is not intended for use by children without direct adult supervision. This is a sophisticated radio controlled model that must be operated with caution and
common sense. Failure to operate your Micro 4WD Rally Car in a safe and responsible manner could result in damage to the
model and property.
2. Plug the AC charger into the proper wall receptacle (110V - US version). Plug the battery pack into the
charger and let it charge for 1 hour for the first time. Charge for 1 hour thereafter for a full charge. Battery
charged for over 1 hour may cause an overcharge.
Losi and Horizon Hobby, Inc. shall not be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, arising from the use, misuse, or abuse of this product or any product required to operate it.
• This model is controlled by a radio signal that is subject to interference from many sources outside your
control. This interference can cause momentary loss of control so it is advisable to always keep a safety
margin in all directions to avoid collisions.
• Always operate your model in an open area away from cars, traffic and people.
• Never run out into the street for any reason.
• Never run your Micro 4WD Rally Car with low transmitter batteries.
• Carefully follow the directions and warnings for this and any optional support equipment that you use. • Keep
all chemicals, small parts and anything electrical out of the reach of children.
• Never leave vehicle on when not in use. By doing so, damage to the battery may occur.
Tools and Items You Will Find Handy
• Soft bristle brush for cleaning
• Losi Micro Phillips Screwdriver - LOSB1602
• Losi Nutdriver: 4.5mm - LOSA99160
• Small flat blade screwdriver
Battery and Charging Guidelines and Warnings
4. Plug battery in and reinsert into vehicle.
Failure to exercise caution while using this product and comply with the following warnings
could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately
injury and property damage.
• Read all safety precautions and literature prior to use of this product
• Never leave the battery and charger unattended during use
• Never allow minors to charge battery packs without adult supervision
• Never drop charger or batteries
• Never attempt to charge dead or damaged batteries
• Never charge a battery if the cable has been pinched or shorted
• Never allow batteries or charger to come into contact with moisture at any time
Close
• Never charge batteries in extremely hot or cold places (recommended between 50-80 degrees Fahrenheit)
or place in direct sunlight
• Always use only NiMH rechargeable batteries. This charger cannot charge batteries such as “heavy duty,”
“alkaline battery,” or “mercury battery”
6.
5.
Step 1 - ON
Step 2 - ON
• Always connect the positive red lead (+) and negative black lead (-) terminals of the battery to the charge
terminals correctly
• Always disconnect the battery and charger after charging and let them cool between charges •
Always inspect the battery before charging
• Always terminate all processes and contact Horizon Hobby if the product malfunctions
• Always make sure you know the specifications of the battery to be charged or discharged to ensure it
meets the requirements of this charger
• Always constantly monitor the temperature of the battery pack while charging
• Always end the charging process if the charger or battery becomes hot to the touch or starts to change
form during the charge process
3.
Transmitter
Steering Wheel: Controls direction (left/right).
Throttle Trigger: Controls speed and direction
(forward/reverse).
Antenna: Transmits signal to the model.
On/Off Switch: Turns the power on/off for the
transmitter.
Antenna
Steering
Reverse
Steering
Wheel
Steering
Trim
Throttle
Reverse
Indicator Lights: Green (right) light indicates
adequate battery power. Red (left)
indicates signal strength.
ST. Trim: Adjusts the “hands off” direction of the
model.
TH. Trim: Adjusts the motor speed to stop at neutral.
Steering Rate: Adjusts amount front wheels move
when the steering wheel is turned
left and right.
ST. REV: Reverses the function of the steering when
On/Off
Switch
Throttle
Trim
Throttle
Trigger
Steering
Rate
the wheel is turned left or right.
TH. REV: Reverses the function of the speed control
when pulled back or pushed forward.
Battery Door: Covers and holds the batteries that
power the transmitter.
Battery
Door
Transmitter Frequencie/Channel
Steering Rate
Transmitter Channel 27.045MHz
Less Rate
More Rate
Adjust steering trim
to the right
Adjust steering trim
to the left
Slipper Adjustments
Hold vehicle firmly in place so tires do not move. Tighten or loosen slipper. Slipper should slip 25 to 50mm during
full throttle punch. Ensure slipper is fully functioning at all times.
CAUTION: It is very important for the slipper to function. If the slipper does not function there is a high
chance of drivetrain failure
Steering Trim
Tighten Slipper
Loosen Slipper
Rebuilding the Differential
Setting Gear Mesh
Front Differential-See page 14 for part numbers
1.
Loosen 3 screws to
make adjustment
2.
Move motor to allow
pinion and spur to
have a small amount of
backlash (play).
Rear Differential-See page 15 for part numbers
3.
Retighten
Warranty and Repair Policy
Gear Ratio
Stock Gearing:
Pinion 12T
Spur Gear 58T
Warranty Period
Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the
“Product”) will be free from defects in materials and workmanship at the date of purchase by
the
Gear Chart
Micro
Spur
4wd
54
58
10 14.0 15.1
12 11.7 12.6
14 10.0 10.8
Purchaser.
Limited Warranty
Horizon reserves the right to change or modify this warranty without notice and disclaims all other
warranties, express or implied.
(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This
warranty covers only those Products purchased from an authorized Horizon dealer. Third party transactions are not
covered by this warranty. Proof of purchase is required for all warranty claims.
Shock Rebuild
Step 1.
Step 2.
Step 3.
Step 4.
Oil
(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET
THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) repair or
(ii) replace, any Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser’s
exclusive remedies. Horizon reserves the right to inspect any and all equipment involved in a warranty claim.
Repair or replacement decisions are at the sole discretion of Horizon. This warranty does not cover cosmetic
damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of or to any part
of the Product. This warranty does not cover damage due to improper installation, operation, maintenance, or attempted
repair by anyone other than Horizon. Return of any Product by Purchaser must be approved in writing by Horizon before
shipment.
Damage Limits
Step 5.
Step 6.
Step 7.
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of
Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup,
final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By
the act of use, setup or assembly, the user accepts all resulting liability.
If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are
advised to return this Product immediately in new and unused condition to the place of purchase. Law: These Terms are
governed by Illinois law (without regard to conflict of law principals).
WARRANTY SERVICES
Questions, Assistance, and Repairs
Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly,
setup or use of the Product has been started, you must contact Horizon directly. This will enable Horizon to
better answer your questions and service you in the event that you may need any assistance. For questions or
assistance, please direct your email to productsupport@horizonhobby.com, or call 877.504.0233 toll free to
speak to a Product Support representative. You may also find information on our website at www.horizonhobby.com.
Inspection or Repairs
If this Product needs to be inspected or repaired, please use the Horizon Online Repair Request submission
process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number.
Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are
not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides
tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives
and is accepted at our facility. An Online Repair Request is available at www.horizonhobby.com http://www.
horizonhobby.com under the Repairs tab. If you do not have internet access, please contact Horizon Product
10
11
Support to obtain a RMA number along with instructions for submitting your product for repair. When
calling
Horizon, you will be asked to provide your complete name, street address, email address and phone number
Compliance Information for the European Union
where you can be reached during business hours. When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included
for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping
carton.
Notice: Do not ship batteries to Horizon. If you have any issue with a battery, please contact the
appropriate Horizon Product Support office.
Warranty Inspection and Repairs
Declaration of Conformity
(in accordance with ISO/IEC 17050-1)
No. HH2010053002
To receive warranty service, you must include your original sales receipt verifying the proof-of-
Product(s):
Item Number(s):
1/24 4WD Rally Car
LOSB0241I
purchase date. Provided warranty conditions have been met, your Product will be repaired or replaced free of charge.
Repair or replacement decisions are at the sole discretion of Horizon.
Equipment class:
Non-Warranty Repairs
Should your repair not be covered by warranty the repair will be completed and payment will be
required without notification or estimate of the expense unless the expense exceeds 50% of the
The object of declaration described above is in conformity with the requirements of the specifications listed below,
following the provisions of the European R&TTE directive 1999/5/EC:
retail purchase cost. By submitting the item for repair you are agreeing to payment of the repair without
notification. Repair estimates are available upon request. You must include this request with your repair. Nonwarranty repair estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts
money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By
submitting any item to Horizon for inspection or repair, you are agreeing to Horizon’s Terms and Conditions found on our website
under the Repairs tab.
Country of Purchase
United States
Horizon Hobby
Horizon Service Center
(Electronics and engines)
Address
4105 Fieldstone Rd,
Champaign, IL
61822 USA
Phone Number/Email
EN 300-220
EN 301 489-1, 301 489-17
EN 60950
Technical requirements for Radio equipment.
General EMC requirements
Safety
Signed for and on behalf of:
Horizon Hobby, Inc.
877-504-0233
Champaign, IL USA
productsupport@horizonhobby.com
May 30, 2010
Horizon Product Support
(All other products)
4105 Fieldstone Rd,
Champaign, IL
61822 USA
877-504-0233
productsupport@horizonhobby.com
Units 1-4 Ployters Rd.
United Kingdom
Horizon Hobby Limited
Staple Tye
Harlow, Essex
+44 (0) 1279 641 097
sales @horizonhobby.co.uk
CM18 7NS
United Kingdom
Germany
France
Steven A. Hall
Vice President
International Operations and Risk Management
Horizon Hobby, Inc.
Horizon Technischer Service
Hamburger Str. 10
25335 Elmshorn
Germany
+49 4 121 46199 66
service@horizonhobby.de
Horizon Hobby SAS
14 Rue Gustave Eiffel
Zone d’Activité du Révell Matin
91230 Montegeron
+33 (0) 1 60 47 44 70
Instructions for Disposal of WEEE by Users in the European Union
This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their
waste equipment by handing it over to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, your household waste disposal service or where you purchased the product.
12
13
WHEEL
FRONT DIFF
LOSB1743
LOSB1730
LOSB1730
LOSB1740
LOSB1757
LOSB1757
LOSB1760
LOSB0843
LOSB1748
LOSB1743
LOSB1752
LOSB1740
LOSB174
LOSB1754
Black - LOSB1584
Gold - LOSB1586
LOSB1746
LOSB1748
LOSB1746
LOSB1752
LOSB1743
LOSB0817
LOSB1743
LOSB1744
LOSB1741
LOSB1751
LOSB1748
LOSB1747
LOSB1742
LOSB1749
LOSB1744
LOSB1740
LOSB1747
LOSB1749
LOSB1742
LOSB1758
LOSB1741
LOSB1741
LOSB1759
LOSB1523
LOSB1730
LOSB1730
LOSB1758
LOSB1755
LOSB1747
LOSB1741
LOSB1759
LOSB1749
LOSB1742
LOSB1749
LOSB1746
LOSB1742
LOSB1740
LOSB1757
LOSB1742
LOSB1730
LOSB1743
LOSB1523
LOSB1762
LOSB1730
LOSB1757
LOSB1764: Screw Set
LOSB1763
LOSB1760
LOSB1743
LOSB1730
Unless otherwise noted, all screws,
fasteners, and associated hardware
are contained in LOSB1764.
SHOCK
REAR DIFF
FCC Statement:
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate
this equipment.
14
15


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:08:03 10:49+08:00
Create Date                     : 2011:08:03 10:49+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual_English.rtf
Creator                         : Vincent
Document ID                     : uuid:6c0f91cc-6570-4b36-a481-f0095e334972
Instance ID                     : uuid:6c78d5cb-54b5-49c6-851c-9a0d8ada8fa2
Page Count                      : 10
Author                          : Vincent

EXIF Metadata provided by EXIF.tools