Horizon Hobby SPMA3175 Receiver User Manual BRWSPMA3175 Part1

Horizon Hobby, LLC Receiver BRWSPMA3175 Part1

Contents

BRWSPMA3175_User Manual_Part1

Download: Horizon Hobby SPMA3175 Receiver User Manual BRWSPMA3175  Part1
Mirror Download [FCC.gov]Horizon Hobby SPMA3175 Receiver User Manual BRWSPMA3175  Part1
Document ID4005709
Application IDLf/9uIWYZaBcqo+X3F+oow==
Document DescriptionBRWSPMA3175_User Manual_Part1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize363.38kB (4542296 bits)
Date Submitted2018-09-14 00:00:00
Date Available2018-09-14 00:00:00
Creation Date2018-09-13 12:12:18
Producing SoftwareFoxit PhantomPDF - Foxit Corporation
Document Lastmod2018-09-13 12:12:18
Document TitleBRWSPMA3175_User Manual_Part1
Document Author: MRT-Sunny

Mode 2 shown
EN
Up Elevator (climb)
Down Elevator (descend)
Receiver SPMA3175 User Guide
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole
discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com
and click on the support tab for this product.
Rudder Left
Rudder Right
Meaning of Special Language
The following terms are used throughout the product literature to indicate various levels of
potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property
damage, collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property
damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property
damage AND a little or no possibility of injury.
 ARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product correctly
can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common
sense and requires some basic mechanical ability. Failure to operate this Product in a safe
and responsible manner could result in injury or damage to the product or other property.
This product is not intended for use by children without direct adult supervision. Do not
attempt disassembly, use with incompatible components or augment product in any way
without the approval of Horizon Hobby, LLC. This manual contains instructions for safety,
operation and maintenance. It is essential to read and follow all the instructions and
warnings in the manual, prior to assembly, setup or use, in order to operate correctly and
avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING AGAINST COUNTERFEIT PRODUCTS
Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic highquality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with
regards, but not limited to, compatibility and performance of counterfeit products or
products claiming compatibility with DSM or Spektrum technology.
NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled
vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will
not provide warranty service related thereto.
WARRANTY REGISTRATION
Visit www.spektrumrc.com/registration today to register your product.
Specifications
Frequency
Input/Output Voltage
Type
Aileron Right
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo
battery, please contact the appropriate Horizon Product Support office.
Troubleshooting Guide (SAFE®)
Possible Cause
Problem
Solution
Control surfaces not at Control surfaces may not
neutral position when have been mechanically
transmitter controls
centered from factory
are at neutral
Aircraft was moved after the
flight battery was connected
and before sensors initialized
Aircraft flies
Trims are moved too far from
inconsistently from
neutral position
flight to flight
Center control surfaces
mechanically by adjusting the
U-bends on control linkages
Controls oscillate in
flight, (Aircraft rapidly
jumps or moves)
Remove propeller and rebalance
or replace it if damaged
Propeller is unbalanced,
causing excessive vibration
Nut on prop shaft is too
loose, causing excessive
vibration
Aircraft does not
Aircraft is not upright and
connect to transmitter immobile after battery is
after battery is
connected
connected
Keep the Aircraft upright and
immobile for 5 seconds after
connecting the battery
Neutralize trims and mechanically
adjust linkages to center control
surfaces
Tighten the prop shaft nut 1/2
turn
Keep the Aircraft upright and
immobile for 5 seconds after
connecting the battery
Troubleshooting Guide
2404-2476 MHz
3.0-4.2V
Ultra Micro Receiver
Possible Cause
Problem
Receiver Ports
FPV Camera Port: Connect
the lead from an FPV
camera to this port.
Aileron Left
Battery lead: Connect
to the flight battery.
Aircraft will
not respond
to throttle but
responds to
other controls
Motor Port: Connect the lead
from the motor to this port.
Right Aileron Port: Connect the lead
from the right aileron servo to this port.
Left Aileron Port: Connect the lead
from the left aileron servo to this port.
Receiver Installation
LED on receiver
flashes rapidly
and aircraft
will not bind
to transmitter
(during binding)
Install the receiver onto the ledges near
the front of the aircraft as shown. Secure
the control linkages to the servos.
LED on receiver
flashes rapidly
and aircraft will
not respond
to transmitter
(after binding)
Binding Procedure
1.
2.
3.
4.
Refer to your transmitter’s unique instructions for binding to a receiver.
Make sure the flight battery is disconnected from the aircraft.
Ensure the transmitter is powered OFF.
Connect the flight battery to the aircraft and turn the aircraft upright. The receiver LED
will begin to flash (typically after 5 seconds).
5. Make sure the transmitter controls are at neutral and the throttle is in the low position.
6. Put your transmitter into bind mode.
7. After 5 to 10 seconds, the receiver status LED will become solid, indicating that
the receiver is bound to the transmitter. If the LED does not turn solid, refer to the
Troubleshooting Guide at the end of the manual.
8. Disconnect the flight battery and power the transmitter off.
IMPORTANT: For subsequent flights, power ON the transmitter for 5 seconds before
connecting the flight battery.
Control Direction Test
1. Place the aircraft into Experienced mode (Mode switch position 2).
2. Face the aircraft away from you.
3. Restrain the aircraft so it does not escape your control while you 0
are testing your transmitter controls.
4. Move the sticks on the transmitter to ensure the aircraft responds
as shown.
5. If the aircraft responds as shown, move the SAFE® mode switch to
Beginner mode (Position 0) to prepare to fly.
Refer to the Binding instructions and Troubleshooting Guide in this
manual for more information. If you need more assistance, contact
the appropriate Horizon Hobby Product Support department.
Experienced Mode
(Switch Position 2)
Controls
reversed
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proofof-purchase date. Provided warranty conditions have been met, your Product will be serviced
or replaced free of charge. Service or replacement decisions are at the sole discretion of
Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will
be required without notification or estimate of the expense unless the expense exceeds 50%
of the retail purchase cost. By submitting the item for service you are agreeing to payment
of the service without notification. Service estimates are available upon request. You must
include this request with your item submitted for service. Non-warranty service estimates
will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight.
Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American
Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing
to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/
content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of
use and ownership. If received, a non-compliant Product will not be serviced.
Further, the sender will be responsible for arranging return shipment of the
un-serviced Product, through a carrier of the sender’s choice and at the
sender’s expense. Horizon will hold non-compliant Product for a period of 60
days from notification, after which it will be discarded.
10-2015
Warranty and Service Contact Information
Country of
Purchase
Solution
Throttle stick and/or throttle trim
is too high
Reset controls with throttle stick
and throttle trim at lowest setting
Throttle channel is reversed
Reverse throttle channel on
transmitter
Motor is disconnected from
receiver
Open fuselage and ensure the
plug for the motor is properly
installed
Transmitter is too near aircraft
during binding process
Law
These terms are governed by Illinois law (without regard to conflict of law principals). This
warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Horizon reserves the right to change or modify this warranty at any time
without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service.
Once assembly, setup or use of the Product has been started, you must contact your local
distributor or Horizon directly. This will enable Horizon to better answer your questions and
service you in the event that you may need any assistance. For questions or assistance,
please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call
the toll free telephone number referenced in the Warranty and Service Contact Information
section to speak with a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live
and use the Product in, please use the Horizon Online Service Request submission process
found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA)
number. Pack the Product securely using a shipping carton. Please note that original boxes
may be included, but are not designed to withstand the rigors of shipping without additional
protection. Ship via a carrier that provides tracking and insurance for lost or damaged
parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at
our facility. An Online Service Request is available at http://www.horizonhobby.com/content/
service-center_render-service-center. If you do not have internet access, please contact
Horizon Product Support to obtain a RMA number along with instructions for submitting your
product for service. When calling Horizon, you will be asked to provide your complete name,
street address, email address and phone number where you can be reached during business
hours. When sending product into Horizon, please include your RMA number, a list of the
included items, and a brief summary of the problem. A copy of your original sales receipt
must be included for warranty consideration. Be sure your name, address, and RMA number
are clearly written on the outside of the shipping carton.
Power off transmitter, move
transmitter a larger distance
from aircraft, disconnect and
reconnect flight battery to aircraft
and follow binding instructions
Bind switch or button was not held Power off transmitter and repeat
while transmitter was powered on bind process
Aircraft or transmitter is too close
to large metal object, wireless
source or another transmitter
Move aircraft and transmitter
to another location and attempt
binding again
Less than a 5-second wait
between first powering on
transmitter and connecting flight
battery to aircraft
Leaving transmitter on,
disconnect and reconnect flight
battery to aircraft
Aircraft is bound to a different
model memory (ModelMatch™
radios only)
Select correct model memory on
transmitter and disconnect and
reconnect flight battery to aircraft
Flight battery/transmitter battery
charge is too low
Replace/recharge batteries
Transmitter may have been bound
to a different model (or with a
different DSM Protocol)
Select the right transmitter or
bind to the new one
Aircraft or transmitter is too close
to large metal object, wireless
source or another transmitter
Move aircraft and transmitter
to another location and attempt
connecting again
Transmitter settings reversed
Do the Control Direction Test and
adjust controls on transmitter
appropriately
Limited Warranty
What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the “Product”) will be free from defects in materials
and workmanship at the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due
to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper
use, installation, operation or maintenance, (iii) modification of or to any part of the Product,
(iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v)
Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with
applicable technical regulations, or (vii) use that violates any applicable laws, rules, or
regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY
OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL
SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon
will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be
defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty
claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of
purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY,
REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT,
NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the
liability of Horizon exceed the individual price of the Product on which liability is asserted.
As Horizon has no control over use, setup, final assembly, modification or misuse, no liability
shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup
or assembly, the user accepts all resulting liability. If you as the purchaser or user are not
prepared to accept the liability associated with the use of the Product, purchaser is advised
to return the Product immediately in new and unused condition to the place of purchase.
United
States of
America
Horizon Hobby
Horizon Service
Center
(Repairs and
Repair Requests)
Horizon Product
Support
(Product
Technical
Assistance)
Sales
European
Union
Horizon
Technischer
Service
Sales: Horizon
Hobby GmbH
Contact Information
Address
1608 Interstate Dr.
Champaign, Illinois, 61822
USA
877-504-0233
HINWEIS
Alle Anweisungen, Garantien und anderen zugehörigen Dokumente können im eigenen
Ermessen von Horizon Hobby, LLC. jederzeit geändert werden. Die aktuelle Produktliteratur
finden Sie auf horizonhobby.com unter der Registerkarte „Support“ für das betreffende Produkt.
WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich
wahrscheinlich Sachschäden, Kollateralschäden und schwere Verletzungen ODER mit
hoher Wahrscheinlichkeit oberflächliche Verletzungen.
ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich
wahrscheinlich Sachschäden UND die Gefahr von schweren Verletzungen.
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, können sich
möglicherweise Sachschäden UND geringe oder keine Gefahr von Verletzungen ergeben.
WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem
Betrieb mit den Produktfunktionen vertraut zu machen. Wird das Produkt nicht
korrekt betrieben, kann dies zu Schäden am Produkt oder persönlichem Eigentum
führen oder schwere Verletzungen verursachen.
Dies ist ein hochentwickeltes Hobby-Produkt. Es muss mit Vorsicht und gesundem
Menschenverstand betrieben werden und benötigt gewisse mechanische
Grundfähigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle
Weise betrieben, kann dies zu Verletzungen oder Schäden am Produkt oder anderen
Sachwerten führen. Dieses Produkt eignet sich nicht für die Verwendung durch Kinder
ohne direkte Überwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung
durch Horizon Hobby, LLC das Produkt zu zerlegen, es mit inkompatiblen Komponenten
zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthält
Anweisungen für Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor
Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im
Handbuch zu lesen und zu befolgen, damit es bestimmungsgemäß betrieben werden kann
und Schäden oder schwere Verletzungen vermieden werden.
Warnung zu gefälschten Produkten
Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Händler um
sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt
gekauft haben. Horizon Hobby lehnt jede Unterstützung, Service oder Garantieleistung von
gefälschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit
Spektrum oder DSM zu sein.
HINWEIS: Dieses Produkt ist ausschließlich für die Verwendung in
unbemanten, ferngesteuerten Fahrzeugen und Fluggeräten im Hobbybereich vorgesehen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen
Verwendung ab.
Spezifikationen
Frequenz
Eingangs- / Ausgangsspannung
Sorte
sales@horizonhobby.eu
FPV-Kameraport: Verbinden
Sie das Kabel von einer FPVKamera mit diesem Port.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Notice: Modifications to this product will void the user’s authority to
operate this equipment.
This product contains a radio transmitter with wireless technology which has been tested
and found to be compliant with the applicable regulations governing a radio transmitter in
the 2.400GHz to 2.4835GHz frequency range.
IC Information
IC: 6157A-SPMA3175
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, Including interference that may cause undesired
operation of the device.
Compliance Information for the European Union
Horizon Hobby, LLC hereby declares that this product is in
compliance with the essential requirements and other relevant provisions of
the RED Directive.
A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance.
Instructions for Disposal of WEEE by Users in the European Union
This product must not be disposed of with other waste. Instead, it is the
user’s responsibility to dispose of their waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal
service or where you purchased the product.
Seitenruder rechts
Querruder links
Querruder rechts
Problem
mögliche Ursache
2404-2476 MHz
3.0-4.2V
Ultra-Mikroempfänger
Batteriekabel: Schließen Sie dieses
Kabel an den Flugakku an.
Motoranschluss: Schließen Sie das
Kabel vom Motor an diesen Anschluss an.
Rechten Querruderhafen:
Verbinden Sie das Kabel vom rechten
Querruderservo mit diesem Anschluss.
Linker Querruderport: Verbinden Sie das Kabel
vom linken Querruderservo mit diesem Port.
Zentrieren Sie die Ruder
mechanisch durch anpassen der
U Bögen
Flugzeug wurde nach dem
Anschließen der Akkus
bewegt bevor dieSensoren
sich initialisiert haben
Das Flugzeug muss aufrecht für
5 Sekunden nach Anschluss des
Akkus stillstehen
Wechselndes
Flugverhalten
Trimmungen wurde zu
weit von Neutral gestellt
Neutralisieren Sie die Trimmungen
und justieren die Anlenkungen
mechanisch um Ruder neutral
zu stellen
Ruder schwingen bei
dem Fliegen /(Flugzeug
springt oder bewegt
sich schnell)
Propeller ist nicht
gewuchtet und verursacht
große Vibrationen
Nehmen Sie den Propeller ab,
wuchten oder ersetzen ihn
Mutter auf der
Propellerwelle ist lose und
erzeugt Vibrationen
Ziehen Sie die Mutter auf der
Propellerwelle 1/2 Umdrehung an
Bindevorgang
1.
2.
3.
4.
Bitte lesen Sie die für ihren Sender entsprechenden Bindeinformationen.
Stellen Sie bitte sicher dass der Flugakku nicht am Flugzeug angeschlossen ist.
Versichern Sie sich dass der Sender ausgeschaltet ist.
Schließen Sie den Flugakku an und stellen das
Flugzeug aufrecht auf das Fahrwerk. Die Empfänger LED beginnt zu blinken
(normalerweise nach 5 Sekunden)
5. Versichern Sie sich dass die Senderkontrollen Neutral sind und das Gas in niedriger
Position.
6. Aktivieren Sie den Bindevorgang am Sender.
7. Nach 5 bis 10 Sekunden leuchtet die Empfänger LED und zeigt damit an, dass der
Empfänger am Sender gebunden ist. Sollte die LED nicht leuchten, sehen Sie bitte im
Leitfaden zur Problemlösung am Ende der Bedienungsanleitung nach.
8. Trennen Sie den Flugakku und schalten den Sender aus.
WICHTIG: Für folgende Flüge schalten Sie den Sender 5 Sekunden bevor sie den Flugakku
anschließen ein.
Steuerrichtungstest
1. Stellen Sie das Flugzeug auf das Fahrwerk und schalten Sie den
Expertenmode (Mode Schalter 2).
2. Richten Sie das Flugzeug so aus, dass es von ihnen weg zeigt.
3. Sichern Sie das Flugzeug so, dass es bei der Funktionskontrolle
nicht ausbrechen kann.
4. Bewegen Sie die Steuerknüppel und stellen sicher dass das
Flugzeug abgebildet reagiert.
5. Sollte das Flugzeug wie abgebildet reagieren können Sie den
SAFE Schalter auf den Anfänger Mode (Position 0) in Vorbereitung
des Fluges schalten.
Bitte lesen Sie für mehr Informationen die Bindeanweisungen und
Experten Mode
den Leitfaden zur Problemlösung. Sollten Sie weitere Unterstützung
benötigen kontaktieren Sie den technischen Service von Horizon Hobby. (Schalter Mode2)
Stellen Sie das Flugzeug
aufrecht hin und für 5 Sekunden
vollkommen aus dem Wind
Problemlösung
Mögliche Ursache
Lösung
Gasstick nicht auf Leerlauf
oder Gastrimmung zu
hoch
Bringen Sie den Gasstick und die
Gastrimmung auf die niedrigste
Position
Gaskanal ist reversiert
(umgedreht)
Reversieren (drehen) Sie den
Gaskanal am Sender
Motor ist vom Regler
getrennt
Stellen Sie sicher, dass der Motor
an den Empfänger angeschlossen
ist
Sender steht während
des Bindens zu nah am
Empfänger
Schalten Sie den Sender aus und
stellen Sie den Sender etwas
weiter vom Empfänger weg.
Trennen Sie den Flugakku und
schließen ihn erneut an. Folgen
Sie den Bindenanweisungen
Bindestecker oder Knopf
wurde nicht während des
Bindens gehalten
Schalten Sie den Sender aus und
folgen den Bindeanweisungen.
Halten Sie den Senderbindebutton
gedrückt bis die Bindung
durchgeführt wurde
Sender oder Luftfahrzeug
zu nah an großen
metallischen Objekten,
Funkquellen oder anderen
Sendern
LED auf dem EmpSie haben weniger
fänger blinkt schnell,
als 5 Sekunden nach
Flugzeug reagiert nicht dem Einschalten des
auf den Sender (nach Senders den Flugakku
dem Binden)
angeschlossen
Flugzeug ist an einen
anderen Speicherplatz
gebunden (nur Sender mit
ModelMatch)
Zu geringe Ladung des
Flug- oder Senderakkus
Bringen Sie das Luftfahrzeug und
an einen anderen Ort und binden
erneut
Flugzeug nimmt kein
Gas an, alle anderen
Funktionen arbeiten
einwandfreis
LED am Flugzeug
blinkt schnell,
Flugzeug läßt sich
nicht an den Sender
binden
Empfängerinstallation
Installieren Sie den Empfänger auf den
Leisten in der Nähe der Vorderseite des
Flugzeugs, wie in der Abbildung gezeigt.
Sichere Steuerverbindungen zu Servos.
Lösung
Ruder sind nicht neutral Ruder sind im Werk
wenn Senderkontrollen mechanisch nicht zentriert
neutral stehen
worden
Flugzeug verbindet sich Flugzeug stand bei dem
nicht mit dem Sender
Anschließen des Akkus
nachdem der Akku
nicht still und aufrecht
angesteckt wurde
Kontrollen reversiert
Sender ist an ein anderes
Modell gebunden (oder mit
anderem DSM Protokoll)
Sender oder Luftfahrzeug
zu nah an großen
metallischen Objekten,
Funkquellen oder anderen
Sendern
Einstellungen am Sender
falsch
(c) Ansprüche des Käufers Es liegt ausschließlich im Ermessen von Horizon, ob das Produkt,
bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die
exklusiven Ansprüche des Käufers, wenn ein Defekt festgestellt wird.
Horizon behält sich vor, alle eingesetzten Komponenten zu prüfen, die in den Garantiefall
einbezogen werden können. Die Entscheidung zur Reparatur oder zum Austausch liegt
nur bei Horizon. Die Garantie schließt kosmetische Defekte oder Defekte, hervorgerufen
durch höhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes,
kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus.
Die Garantie schließt Schäden, die durch falschen Einbau, falsche Handhabung, Unfälle,
Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgeführt wurden aus.
Rücksendungen durch den Käufer direkt an Horizon oder eine seiner Landesvertretung
bedürfen der Schriftform.
Schadensbeschränkung
Horizon ist nicht für direkte oder indirekte Folgeschäden, Einkommensausfälle oder
kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen
verantwortlich, unabhängig ab ein Anspruch im Zusammenhang mit einem Vertrag, der
Garantie oder der Gewährleistung erhoben werden. Horizon wird darüber hinaus keine
Ansprüche aus einem Garantiefall akzeptieren, die über den individuellen Wert des
Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung
oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Käufer
gewählt werden. Horizon übernimmt keine Garantie und akzeptiert keine Ansprüche für in
der folge auftretende Verletzungen oder Beschädigungen. Mit der Verwendung und dem
Einbau des Produktes akzeptiert der Käufer alle aufgeführten Garantiebestimmungen
ohne Einschränkungen und Vorbehalte. Wenn Sie als Käufer nicht bereit sind, diese
Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren,
werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung
vollständig bei dem Verkäufer zurückzugeben.
Problemlösung (SAFE)
Problem
FCC Information
FCC ID: BRWSPMA3175
This equipment has been tested and found to comply with the limits for Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Seitenruder links
Nicht geeignet für Kinder unter 14 Jahren. Dies ist kein Spielzeug.
Empfängeranschlüsse
+49 (0) 4121 2655 100
Höhenruder nach unten (sinken)
Spezielle Bedeutungen
Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf
unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
websales@horizonhobby.com
800-338-4639
Hanskampring 9
D 22885 Barsbüttel,
Germany
Höhenruder nach oben (steigen)
SPMA3175 Bedienungsanleitung
Garantie Registrierung
Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration.
servicecenter.horizonhobby.
com/RequestForm/
productsupport@
horizonhobby.com.
Mode 2 abgebildet
DE
Lassen Sie den Sender
eingeschaltet, trennen Sie den
Flugakku und verbinden ihn wieder
Wählen Sie das richtige Modell
im Modell-speicher, trennen und
verbinden den Flugakku erneut
Ersetzen Sie die Batterien, laden
Sie die Akkus
Wählen Sie den richtigen Sender
oder binden den neuen Sender
Bringen Sie das Luftfahrzeug
und an einen anderen Ort
und versuchen dort eine neue
Verbindung
Führen Sie einen Kontroll
Richtungstest durch und stellen
den Sender richtig ein. (Siehe dazu
Sender und Modelleinstellungen)
Garantie und Service Informationen
Garantiezeitraum
Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei
von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen
Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland beträgt
der Garantiezeitraum 6 Monate und der Gewährleistungszeitraum 18 Monate nach dem
Garantiezeitraum.
Einschränkungen der Garantie
(a) Die Garantie wird nur dem Erstkäufer (Käufer) gewährt und kann nicht übertragen
werden. Der Anspruch des Käufers besteht in der Reparatur oder dem Tausch im
Rahmen dieser Garantie. Die Garantie erstreckt sich ausschließlich auf Produkte, die
bei einem autorisierten Horizon Händler erworben wurden. Verkäufe an dritte werden
von dieser Garantie nicht gedeckt. Garantieansprüche werden nur angenommen, wenn
ein gültiger Kaufnachweis erbracht wird. Horizon behält sich das Recht vor, diese
Garantiebestimmungen ohne Ankündigung zu ändern oder modifizieren und widerruft dann
bestehende Garantiebestimmungen.
(b) Horizon übernimmt keine Garantie für die Verkaufbarkeit des Produktes, die Fähigkeiten
und die Fitness des Verbrauchers für einen bestimmten Einsatzzweck des Produktes. Der
Käufer allein ist dafür verantwortlich, zu prüfen, ob das Produkt seinen Fähigkeiten und dem
vorgesehenen Einsatzzweck entspricht.
Sicherheitshinweise
Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und
Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fähigkeiten.
Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von
Lebewesen und Sachbeschädigungen erheblichen Ausmaßes führen. Dieses Produkt
ist nicht für den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten
vorgesehen. Die Anleitung enthält Sicherheitshinweise und Vorschriften sowie Hinweise
für die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor
der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang
verhindert und Unfälle mit Verletzungen und Beschädigungen vermieden werden.
Fragen, Hilfe und Reparaturen
Ihr lokaler Fachhändler und die Verkaufstelle können eine Garantiebeurteilung ohne
Rücksprache mit Horizon nicht durchführen. Dies gilt auch für Garantiereparaturen. Deshalb
kontaktieren Sie in einem solchen Fall den Händler, der sich mit Horizon kurz schließen wird,
um eine sachgerechte Entscheidung zu fällen, die Ihnen schnellst möglich hilft.
Wartung und Reparatur
Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren
Fachhändler oder direkt an Horizon.
Rücksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer
bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhändler vom technischen Service.
Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder
telefonisch bei dem technischen Service von Horizon.
Packen Sie das Produkt sorgfältig ein. Beachten Sie, dass der Originalkarton in der
Regel nicht ausreicht, um beim Versand nicht beschädigt zu werden. Verwenden Sie
einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur
Annahme keine Verantwortung für den Versand des Produktes übernimmt. Bitte legen Sie
dem Produkt einen Kaufbeleg bei, sowie eine ausführliche Fehlerbeschreibung und eine
Liste aller eingesendeten Einzelkomponenten. Weiterhin benötigen wir die vollständige
Adresse, eine Telefonnummer für Rückfragen, sowie eine Email Adresse.
Garantie und Reparaturen
Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem
autorisierten Fachhändler beiliegt, aus dem der Käufer und das Kaufdatum hervorgeht.
Sollte sich ein Garantiefall bestätigen wird das Produkt repariert oder ersetzt. Diese
Entscheidung obliegt einzig Horizon Hobby.
10-2015
Garantie und Service Kontaktinformationen
Land des Kauf
Horizon Hobby
EU
Horizon Technischer
Service
Horizon Hobby GmbH
Kontaktinformationen
Adresse
+49 (0) 4121 2655 100
service@horizonhobby.eu
Hanskampring 9
D 22885 Barsbüttel,
Germany
Rechtliche Informationen für die Europäische Union
Horizon LLC erklärt hiermit, dass dieses Produkt konform zu den essentiellen
Anforderungen der RED Direktive ist.
Eine Kopie der Konformitätserklärung ist online unter folgender Adresse
verfügbar: http://www.horizonhobby.com/content/support-render-compliance.
Entsorgung in der Europäischen Union
Dieses Produkt darf nicht über den Hausmüll entsorgt werden. Es ist
die Verantwortung des Benutzers, dass Produkt an einer registrierten
Sammelstelle für Elektroschrott abzugeben diese Verfahren stellt sicher, dass
die Umwelt geschont wird und natürliche Ressourcen nicht über die Gebühr
beansprucht werden. Dadurch wird das Wohlergehen der menschlichen
Gemeinschaft geschützt. Für weitere Informationen, wo der Elektromüll
entsorgt werden kann, können Sie Ihr Stadtbüro oder Ihren lokalen Entsorger kontaktieren.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 1
Producer                        : Foxit PhantomPDF - Foxit Corporation
Author                          : MRT-Sunny
Create Date                     : 2018:09:13 12:12:18
Modify Date                     : 2018:09:13 12:12:18
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BRWSPMA3175

Navigation menu