Horng Technical Enterprise HTM69WRT Wireless Optical Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	405124
Application ID	n4fitL00kYaktFYmo+VYFw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.83kB (160335 bits)
Date Submitted	2004-03-15 00:00:00
Date Available	2004-03-11 00:00:00
Creation Date	2004-02-20 13:33:29
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-02-20 13:33:29
Document Title	Microsoft Word - ¨Ï¥Î¤â¥UHTM-69WRT.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	TingLin

Wireless optical Mouse
HTM-69WRT
User’s Manual
Installation of the mouse
Features
Designed using a FSK transmitter.
interference.
1. Pull out the USB receiver from the bottom of the mouse; plug the receiver into
the USB port. Switch the computer on running Win98, Win2000, XP ,NT &
ME. The mouse should be automatically recognized by the system.
2. When insert the batteries into battery compartment, ensure correct polarity as
indicated ("+" and "-") and optical sensor should be switched on after that.
3. Set up digital ID
● Aim the front of the mouse to the receiver.
Longer transmission distance (Min. 1.5M)
● Press ID switch at the bottom of the mouse and the one on the receiver. The
Two kinds of USB receivers-Dongle and Shark.
Idealized for desktop PC and notebook with smart storage function
4 modes of operations to lower the power consumption.
Single channel at frequency 27 MHz with 256 IDs to prevent signal
R.
Used for USB interface with operation system Windows○
800 DPI optical sensor used on most surfaces.
LED indicator in receiver for mouse linkage.
Product Specification
Description
Product
RF Wireless Optical Mouse
Mouse Model Type No.
HTM-69WRTU
Dongle Model Type No.
RS9
Movement Sensor
Optical Sensor
Resolution
800dpi
Operating Frequency
27MHz
Distance
Min 1.5M
Power Supply
2*AAA Batteries
Power Saving Operation
4 modes
Consuming Current
26mA @ 3V at full speed
Security ID Code
256 Sets
Interface
● When setup, the LED on the receiver flashes for 1-2 sec. Once ID setup is
completed, the LED will stop flashing.
(Ps. If setup procedure is failed, repeat the process until succeeding.)
Item
System Requirements
mouse and receiver will be co-ordinated and ready to operate.
4. Now whenever you move the mouse or click any one of the buttons, the data
receipt confirmation LED will switch on. If you stop working the mouse, the
LED will turn to flash after 16 sec., then the LED will be switched off after 16
mins. (Auto power saving function) If you want to wake up the mouse, all you
need to do is just to click any button. This is our power saving design.
5 The digital ID in the mouse will not be changed by rebooting, switching off
computer or exchanging mouse to the other computer.
But, once replace the
batteries, it will be essential to sep up new digital ID again.(refer to point. 3)
Left button
Right button
ID switch
ID switch
IBM or compatible PC
Windows 98/ME /2000//XP
USB1.1
Click/scroll wheel
Battery cover
Receiver LED
15.105 Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
Regulatory information / Disclaimers
Installation and use of this Wireless optical Mouse device must be in strict accordance with the
instructions included in the user documentation provided with the product. Any changes or modifications
(including the antennas) made to this device that are not expressly approved by the manufacturer may
void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or
television interference caused by unauthorized modification of this device, or the substitution of the
connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to
correct any interference caused by such unauthorized modification, substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for any damage or
violation of government regulations arising from failing to comply with these guidelines.
Any changes or modifications (including the antennas) made to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:02:20 13:33:29+08:00
Modify Date                     : 2004:02:20 13:33:29+08:00
Page Count                      : 3
Creation Date                   : 2004:02:20 05:33:29Z
Mod Date                        : 2004:02:20 05:33:29Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : TingLin
Metadata Date                   : 2004:02:20 05:33:29Z
Creator                         : TingLin
Title                           : Microsoft Word - .......UHTM-69WRT.doc

EXIF Metadata provided by EXIF.tools