Hotpoint Bfi 680 Users Manual 042147gb.p65
BFI 680 BFI680_04214703gb
BFI 680 to the manual 32b1fd3d-3486-48d0-9a50-8cb7c9d8500e
2015-01-24
: Hotpoint Hotpoint-Bfi-680-Users-Manual-314644 hotpoint-bfi-680-users-manual-314644 hotpoint pdf
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Instructions for Installation and Use Dishwasher Model BFI 680 D ISHWASHER Contents Electrical Connection For Your Safety Installation Getting to know your Dishwasher The Controls How to use your Dishwasher Programme Chart Before Using your Dishwasher Loading your Dishwasher Care and Cleaning Troubleshooting Information for Test Labs After Sales Service Hotpoint Guarantee Notes Key Contacts 3 4 5 6 6 7 8 9-10 11 12 13 14 15 16 17-18-19 Back Cover Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings. If the Book is lost or damaged a copy may be obtained from: Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB. 2 D ISHWASHER Electrical Connection WARNING: This appliance must be earthed. Fuses Safety Information Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug. At the time of delivery... All functions of your dishwasher have been thoroughly tested at the factory. A small number of water marks may have been left as a result, they will disappear when the appliance is used for the first time. WARNING: The dishwasher must not be connected to the electricity supply while installation is being carried out. WARNING: DO NOT use the plug unless the fuse cover is fitted. - Changing the Plug Cut off and dispose of the supplied plug if it does not fit your socket. WARNING: To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else. IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Green/Yellow Earth Blue Neutral Brown Live - If your family includes children... - If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be: EARTH ‘E’ or NEUTRAL ‘N’ LIVE ‘L’ Changing the Mains Lead A lead can be ordered from Hotpoint Service UK: 08709 066 066 or Republic of Ireland: 1850 302 220 If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician. If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations. This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket. Use the dishwasher solely in a domestic environment. DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward. DO NOT allow children to play with the appliance or tamper with its controls. Keep detergents and rinse aids away from children. Keep children away from the open door of a dishwasher, there could still be some detergent left inside. CAUTION: The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user. The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of nonoriginal spare parts. 3 D ISHWASHER For your Safety This manual forms an integral part of the appliance. It must always be kept handy for reference. Read through all the instructions contained in this manual before using the dishwasher. Installation must be performed by a qualified technician, in compliance with the regulations in force, including the prevention and elimination of radio frequency interference. The dishwasher is designed for washing and drying dishes, any other use shall be considered improper. The manufacturer declines all responsibility for uses other than those described above. The dishwasher is intended for use by adults. DO NOT allow children to come near or play with the controls. 1. Keep children away from detergents and clear of the dishwasher door when open. Keep all packaging material away from children. 2. 3. 4. 5. 6. 4 Seperate the various packaging materials and dispose of safely - DO NOT leave discarded packaging material around the home. After removing the packaging, check to make sure your appliance is intact. If in doubt, contact a qualified professional. DO NOT use extension leads and multiple plugs. If the electricity supply wire is not long enough, then have it replaced with one of the correct length and remember that it should be free of bends or dangerous kinks. In the event of any damage to the power cord have it replaced by a qualified technician. The mains plug must be easily accessible after installation. If the appliance is not operating properly or if maintenance operations are necessary, disconnect the dishwasher from the mains power supply (unplug it!). 7. DO NOT install outdoors, not even if the area is covered by a roof: it is extremely dangerous to leave it exposed to rain and thunderstorms. 8. If installed on a carpeted or covered floor, ensure that the openings on the underside are not obstructed. 9. Do not touch the heating element during or straight after a wash cycle. 10. If the appliance malfunctions, turn off the water inlet tap and disconnect the plug from the wall socket. Then read the section entitled "Troubleshooting". If you cannot resolve the problem, then call Hotpoint Service (see KEY CONTACTS, back page). The rating plate, featuring the technical data, serial number and markings, is visibly positioned on the inner edge of the door. DO NOT remove the rating plate. 1. 2. 3. 4. DO NOT use solvents, such as alcohol or turpentine which may cause an explosion. DO NOT load dishes to wash that are soiled with ash, wax or paints. DO NOT lean, sit or stand on any part of the dishwasher - this could cause injury and/or damage the appliance. DO NOT drink any water residues from inside the dishwasher. D ISHWASHER Installation Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is provided with water supply and drain hoses, which can be directed towards the left or right to facilitate appropriate installation. Levelling. Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the appliance is level, it will help ensure its correct operation. Height Adjustment Insert the appliance into the cutout and then adjust the height using the screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively. Adjusting the back Feet Insert the appliance into the cutout and then adjust the height using the screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively. Condensation-proof tape. On some models, a transparent condensation-proof adhesive tape has been provided. It should be stuck onto the lower side of your wooden worktop to protect it from the formation of condensation. When not provided, this tape can be requested as a spare part from authorised retailers. Cold water connection. Connect the cold water supply hose to a 3/4 gas threaded connection, taking care to screw it tightly onto the tap. If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher. Anti-flooding protection Your dishwasher has a special system which stops the water supply in the event of leaks inside the appliance. It is equipped with a water inlet that has a clear outer hose and an inner high pressure hose which turns bright red if it breaks. Leaks are prevented as the clear outer hose now contains the water. It is vital that you check it on a regular basis, if you see it has turned bright red, you know you need to replace it as soon as possible. Call for an authorised technical engineer to come and replace it. Drain hose connection. WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains. IMPORTANT: For the correct operation of your dishwasher, it is essential to comply with the following information:Standpipe: Ensure that the hose is not pushed too far down the standpipe. If the end of your drain hose is fitted with ‘retaining flaps’, ensure they are inserted fully into the standpipe. This will prevent the pipe from jumping out during installation and use. Sink Waste System: For under sink drainage: Before connecting the drain hose, remove any internal restrictions This will prevent a build up of debris which could cause a blockage. Remove any restrictions from the waste spigot and ensure that the sealing bung is removed. The hose should be routed, such that it is raised to a minimum height of 800mm (31/2”). NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm. DO NOT position the standpipe near an electrical outlet. ENSURE that the drain hose is not kinked and it is routed as shown in the diagram. The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your household sink. It MUST NOT be connected to a surface water drain. 1. Untie the end of the GREY drainage hose from the rear of the appliance. 2. Reposition the ‘Hooked End Support’ as required along the GREY drainage hose. 3. If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug. Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood. 5 D ISHWASHER Getting to know your Dishwasher E. Upper basket I. F. Top spray arm J. Salt container cap G. Basket height adjuster K. Washing filter H. Lower basket L. Detergent and rinse aid dispenser E Bottom spray arm G F H J K I L The Controls A. ON-OFF Button R. Basket indicator light Press this button to switch the This light shows the basket appliance on. selected. B. ON-OFF Indicator light S. Low Salt indicator light This light informs you that the This light warns you that it is time dishwasher is on. to add more salt. C. Delayed start select button T. Low Rinse Aid indicator light This button delays the start of the This light warns you that it is time wash cycle you selected by 2, 4 to add more rinse aid. or 6 hours. D. Delayed start Indicator light This indicates that the delayed start has been set. E. Extra drying button S M Press this button for greater drying. M. Cycle indicator light This light shows you which cycle you have selected or the one in progress. P. Wash Programme Selector Each time this button is pressed, one of the cycle indicator lights “M” will come on in sequence. Q. Basket selection button Press this to choose whether you want dishes on the lower or upper P basket to be washed. T Q C B A 1 2 E R D Technical Characteristics Technical characteristics Width cm. 59,5 Depth cm. 57 Height cm. 82 Capacity Mains water pressure 6 12 standard place settings 4,3 psi - 145 psi (30 KPa÷ 1MPa) (0,3 ÷10 bar) Power voltage See data plate Total absorber power See data plate Fuse See data plate This dishwasher conforms to the following European Community Directives: 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications; 97/17/CE (Labelling) D ISHWASHER How to use your Dishwasher First of all. - Turn on the water supply tap completely. - Add the correct amount of detergent. - Load the baskets correctly. - Check that the spray arms rotate freely. - Close the door securely. Modifying a wash cycle in progress. If you have chosen the wrong cycle - You can modify the wash cycle in progress, if it has only just started. Open the door carefully, to avoid any hot water splashes. Then keep button "P" pressed in for approximately 5 seconds, you will hear a - Press the ON-OFF button "A": indicator light "B" comes on. Your appliance is now on and awaiting instructions. prolonged beep will sound, followed by three short beeps. Indicator light "M" will go out to show all the settings will have been cancelled. You are now free to reset the correct wash cycle. Select the wash cycle. Select the wash cycle by pressing button "P". Each time this button is pressed, one of the indicator lights “M” will come on in sequence. Select the wash cycle most suitable for the type of dishes to wash (see ‘Programme Chart’). Close the door and after a few seconds, you will hear a short beep: the wash cycle has started. You've left out a dish? Interrupt the wash cycle by opening the door, carefully, then insert the dish you had forgotten. When you shut the door the cycle will start up from where you interrupted it. Cycle end The end of the wash cycle is indicated by 2 short beeps and the flashing of the wash cycle indicator light “M”. Warning! Open the dishwasher door.Turn the appliance off by pressing button “A”, unplug the appliance from the electricity socket to cut off the power supply; the power supply cable should consequently be easily accessible. Delaying the start of a programme. When you have loaded the dishes, you can choose when to start your dishwasher before setting the wash cycle desired. Press button "C" to delay the start of the wash cycle by 2, 4 or 6 hours. Each time you press it, you will hear a short beep and indicator light "D" corresponding to the selected delay will come on. Select the desired wash cycle. Close the door and, after you hear the beep, the countdown to the delayed start will begin. If, for example, you have set the delayed start to 6 hours, the 6 hour indicator light will flash, then the 4 hour indicator light will flash, and finally the 2 hour indicator light. The indicator lights will keep you informed of the countdown progress at all times. Once this time is up, indicator light "D" will stop flashing and the wash cycle will begin. If you change your mind and you wish to set a different delay, just open the door, press button "C" and repeat the selection. If you want to cancel the delay set and you wish to start the wash cycle immediately, press the button in sequence until indicator light "D" comes off. Once you close the door, the wash cycle set previously will begin. Half load. Your dishwasher also allows you to wash half a load, to save water , electricity and detergent (use only half the amount). Before setting a wash cycle , press button "Q" repeatedly to select whether you want to run a half cycle on the upper or lower basket. Each time you press it, you will hear a short beep and indicator light "R" corresponding to the selected basket will come on. Extra drying Press button "E" before you start the selected wash cycle. A prolonged beep will inform you that you have selected extra drying, a short beep indicates it has been cancelled. With extra drying, the wash cycle will last longer, to provide you with drier dishes. There's been a power failure or you opened the dishwasher door The wash cycle stops and then restarts when the electricity comes back on or when you close the door. Turn off the water tap. Wait a few minutes before unloading the dishes: they are very hot! If you wait a little while, they dry better due to the steam. Empty the lower basket first. 7 D ISHWASHER Programme Chart Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below: Auto Wash Cycle: the dishwasher is equipped with a Sensor System that measures how dirty the dishes are and decides the most suitable programme for the load, setting the optimal cycle length, number of rinses and water level. This provides a more efficient and economic wash cycle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o optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your dishwasher, use the soak cycle to avoid caked on food and build up of bad odours. 8 D ISHWASHER Before Using your Dishwasher Topreventrustfromforming, load the salt just before beginning a wash cycle. Adjusting the water softener. Your dishwasher can adjust its salt consumption according to the hardness of the water in your home. This way, you can optimise and customise your dishwasher's salt consumption. To adjust salt consumption, do as follows: 1. Unscrew the salt container cap 2. There is an arrow on the neck of the container (see figure): if necessary, turn the arrow anticlockwise from the "-" setting to the "+" setting. Select the arrow position depending on the water hardness, referring to the table. Water Hardness Salt consumption (grams/cycle) Autonomy (cycles\2kg) Clarke degrees °fH mmol/l Selector position 0 - 14 0 - 17 0 -1,7 / 0 / 14 - 36 18 - 44 1,8 - 4,4 "-" 20 60 36 - 71 45 - 89 4,5 - 8,9 MED 40 40 "+" 60 25 >71 >89 > 8,9 You don't know how hard the water in your home is? Ask the company that supplies water in your area. Salt Filling the salt container. When to add salt: Always use salt which is intended for dishwasher use. The salt container is situated underneath the lower basket, fill it up as follows: 1.Pull out the lower basket completely, unscrew and remove the container cap 2. If it is the first time you add the salt, first fill the container up with water (you won't have to do this again next time) 3. Put the dishwasher funnel on the hole and pour in approximately two kilos of salt. It is normal that some water comes out of the container. 4. Screw the cap back in place carefully. The salt container should be filled up when the low salt indicator light “S” flashes. The dishwasher will remind you to do so for three consecutive wash cycles. 9 D ISHWASHER Before Using your Dishwasher The detergent Adding detergent To open lid A, press button B. The detergent should be put into the two containers C and D. If using a tablet, put it in container "D". Now you can close the lid: press it down until you hear it click. B • Use the right amount of detergent (see programme chart). • Store your detergent and rinse aid in a cool, dry place, safely away from children. C D If it won't close Check whether there is any detergent residue on the edges of the dispenser. Remove the excess. A Rinse aid. Rinse aid makes dishes sparkle more as it improves their drying. The rinse aid container is situated on the inside of the door. You should fill it up when the rinse aid indicator light “T” flashes. Adding rinse aid. To open the dispenser, turn cap C anticlockwise. Take care when you pour in the rinse aid to avoid it overflowing. You can regulate the amount of rinse aid used by the dishwasher, move the adjuster F which you will find under lid C. F C - The amount of rinse aid needs to be increased if the dishes appear dull or you can see circular stains. - The amount of rinse aid needs to be reduced if the dishes are sticky or you can see white streaks. You can choose from six different positions. It is normally set to 4. Warning Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2. In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. 10 D ISHWASHER Loading your Dishwasher First of all. Before placing dishes in the baskets, remove all course food remains. This avoids blocking the filter, which would reduce the efficiency of the wash. If saucepans and frying pans are very dirty, allow them to soak before being washed. To make it easier to load your dishes, pull the baskets out. Multisystem baskets The dishwasher is fitted with upper, lower and cutlery baskets. They provide greater flexibility for loading dishes, making them more suitable for your specific needs. The basket handles can be removed for cleaning. Pull out the two fastening plugs, remove the handles and rinse under running water. Replace the handles fixing them in place with the two fastening plugs. What goes into the lower basket? We recommend you place the most difficult dishes to wash into the lower basket: saucepans, lids, soup dishes and plates (a load example is shown in the photo). • Serving dishes and large lids: place them on the sides of the basket. • Saucepans, salad bowls: must always be placed upside down • Very deep dishes: place them obliquely, thus allowing water to run down them and cleaning them better • Glasses and cups: position them as shown in load example photo. The cutlery basket may be split into two parts by pulling out the handle. When you only have a little cutlery to wash you can use just half the basket, save space for other crockery or place the other half in the upper basket instead (see figures A and B). Knives and utensils with sharp blades or tips should be positioned with the sharp parts at the bottom. This basket is equipped with two removable grids. Insert the cutlery one by one into the slots, with the handles at the bottom. Position them so that they don’t touch. In this specific model, the cutlery basket is fitted with two detachable side compartments, as shown in figure A1, which can be hooked on either the upper or lower basket as required. What goes into the upper basket? Place delicate and lightweight dishes in the upper basket: glasses, tea cups and coffee cups, saucers and plates - shallow salad bowls, slightly dirty frying pans and shallow pans. Position lightweight dishes in such as way as to avoid their being moved by the spray of water. The dishwasher can also be equipped with one or two tip up compartments onto which you can place mugs and cups, as well as long sharp knives and serving cutlery. Load examples lower basket upper basket After loading the dishes, remember to check that the spray arms can turn freely without hitting against any dishes. How to adjust the upper basket. The upper basket can be set in high or low position to enable you to organise your dishes effortlessly. A Fig.C B A1 A1 There are two handles on the sides of the upper basket, use these to adjust its height (see fig.C). What can I Wash Items not suitable for the dishwasher: • Cutlery and tableware made from wood or part wood - They may become faded and unsightly in appearance. • Avoid washing horn handled and bronze cutlery in the machine. • Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns printed on these items will not be dishwasher proof. • Plastic objects that are not resistant to hot water. • Copper and Pewter utensils. Aluminium and Sliver objects. • Some types of glass can become opaque in appearance after they have been washed too many times in a dishwasher. • Highly absorbent materials such as sponges and towels should never be placed in a dishwasher. • If in any doubt, check with the manufacturer on items suitability for dishwasher’s. WARNING: Dishes or cutlery soiled with tobacco ash, wax, lubricating grease or paint should not be put in the dishwasher. Our recommendation: In future, only purchase table or kitchenware that has been confirmed - dishwasher proof. 11 D ISHWASHER Care and Cleaning Unplug the appliance. Cleaning the spray arms. Before carrying out any cleaning or maintenance on the dishwasher, always remove the plug from the electricity socket. Food residue may become encrusted onto the spray arms and block the holes where water comes out. Check the spray arms regularly and clean them once in a while. After every wash. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. The filter assembly • If you want consistent good results from your dishwasher, you need to clean the filter assembly. • Remove the larger food particles trapped inside the cup “C” and the semi-circular filter A after each wash; pull the cup handle upwards to remove them. Just rinse them under running water. • The entire filter assembly should be cleaned thoroughly once a month: cup C + semi-circular filter A + cylindrical filter B. Rotate filter “B” anticlockwise to remove it. For cleaning, use a non metallic brush. 1 B 2 A C Reassemble the filter parts (as shown in the figure) and reinsert the whole assembly into the dishwasher. Position it into its housing and press downwards. The dishwasher is not to be used without filters. Improper replacement of the filters may reduce the efficiency of the wash and even damage your dishwasher. 12 DO NOT use solvents or abrasives to clean the exterior and rubber parts of your appliance, do not use solvents or abrasive cleaning products. Use a cloth dampened with lukewarm soapy water only. If there are any stains on the surface of the appliance interior, use a cloth dampened with water and a little white vinegar, or a cleaning product specifically made for dishwashers. The seals. One of the factors that cause unpleasant odours to form inside the dishwasher is food that remains trapped in the seals. Periodic cleaning using a damp sponge will prevent this from occurring. Going away If the dishwasher is not going to be used for some time, carry out the following: • run a cycle with the dishwasher empty. • switch off at the electrical socket andunplug. • turn off the water supply tap, disconnect the inlet hose and allow to drain. • fill the rinse aid dispenser. • leave the door ajar, to prevent the build up of unpleasant odours inside the dishwasher. Before using the dishwasher after a long break, plug in and switch on at the electrical socket. Reconnect the inlet hose and turn on the water supply tap. Check there are no deposits of rust inside the water pipe, if there are allow water to run from the supply tap for a few minutes. Disconnecting the dishwasher. Whendisconnectingthedishwasher it is important that tasks are carried out in the correct sequence. • switch off at the mains and remove the plug from the socket. • turn off the water supply. • disconnect drain and water inlet hose. • pull out the dishwasher, carefully, withdrawing hoses at the same time. Moving the appliance. Drain water from the dishwasher. Secure all loose parts. Only transport in an upright position. • If not kept upright during transport, any water remaining inside may seep into the control module and cause subsequent errors with programme functions. D ISHWASHER Troubleshooting Caution - Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage, as well as danger to the user. - The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug. Resolving minor problems yourself. Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again that much sooner. The following list of common occurences and their remedies should help you identify the causes of most problems. If the dishwasher won't start, check... ■ Is the dishwasher plugged in at the electricity socket and switched on? ■ Is there a power failure, check other appliances. ■ Check the fuse. ■ Is the water supply tap turned on? ■ Is the water inlet hose connected properly? ■ Is the pressure of the water supply sufficient? ■ Is the inlet hose kinked? ■ Is the filter on the water supply hose blocked? ■ Isthedishwasherdoornotclosed properly? If water remains inside the dishwasher, check... ■ the drain hose is not kinked. ■ the drain syphon is not obstructed. ■ the dishwasher filters are not clogged. If the dishes are not being cleaned properly, check... ■ the correct amount of detergent has been added. ■ there is regenerating salt in the salt container. ■ the dishes have been loaded correctly. ■ the selected programme is suitable for the type of dishes and the degree of soiling. ■ all filters are clean and positioned correctly. ■ the spray arm nozzles are not obstructed. ■ there is nothing obstructing the rotation of the spray arms. If the dishes fail to dry or remain dirty, check... ■ there is rinse aid inside the rinse aid container. ■ the rinse aid dispenser setting is correct. ■ the detergent being used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open). If the dishes show signs of streaking, staining etc. check... ■ the rinse aid dispenser setting is not set too high. If there are visible traces of rust inside the tank, check... ■ the cap off the salt container is securely closed and that the water softner setting is correct. ■ the correct amount of detergent is being used. Certain detergents can be more corrosive than others. ■ the tank is made of steel and therefore any rust marks are due to external elements (fragments of rust from the tank pipes, pots, cutlery etc.) Special products are commercially available to remove such marks. Error messages Your dishwasher is equipped with a safety system which is able to detect operating faults. You will know if there are any faults if codes start flashing on the display. Take a note of the codes, turn the appliance off and call Hotpoint Service for technical assistance. Tap off alarm If you have forgotten to turn the water tap on, your appliance will remind you of this by sounding a few short beeps for a few minutes. Turn the tap on and your appliance will start up again after a few minutes. Were you to be absent when these beeps are sounded, the appliance will be blocked automatically and wash cycle 5 and 6 indicator lights (rapid and crystal) will flash rapidly. Turn the appliance off at the ONOFF button, turn on the water tap and wait approximately 20 seconds before turning the appliance back on. Re-select the wash cycle and the appliance will start up again. If after all the checks, the appliance still does not operate or the problem persists, call Hotpoint Service (see KEY CONTACTS, back page) and inform them of: - the type of problem - the abbreviation of the model name (Mod.) and the relative numbers (S/N) written on the rating plate located on the inner edge of the door. Switch off at the mains socket and remove the plug. Turn off the water supply. Clogged filter alarm If the appliance is blocked and wash cycle4 and 6 indicator lights (auto eco and crystal) flash rapidly, this means the filter is clogged by large particles of food residue. Turn the appliance off, clean the filter thoroughly and reposition it in its seat as illustrated on page12. Then turn the appliance back on. Re-select a wash cycle as indicated in the "Selecting the wash cycle" paragraph and the appliance will start. Water load solenoid valve malfunction alarm. If indicator light 5 (rapid wash) flashes rapidly, TURN the dishwasher OFF AND BACK ON AGAIN after one minute. If the alarm persists, first turn off the water tap to avoid any flooding and then cut off the electricity supply and call for technical assistance. 13 INFORMATION FOR TEST LABS D ISHWASHER Load for 12 Standard Settings tests (upper basket at top position) upper basket lower basket 3 12 C 12 B A 1 h D 9 A 2 C 6 Low er basket f g e 5 1 3 2 U pper basket Ty p e Ite m A B s o u p e p la te 23 cm . e cup 0 ,2 0 l. d in n e r p la t e 26 cm . f 19 cm . dessert p la t e o v a l p la tte r 19 cm . g s e r v in g bow l g la s s 2 5 0 m l. 35 cm . h k saucer 14 cm . s e r v in g bow l s e r v in g bow l 13 cm . C D e e g 9 3 k g g C 4 i D ia m e te r V o lu m ( a p p r o x im a te ly ) Ty p e i Ite m D ia m e te r /V o lu m ( a p p r o x im a te ly ) 16 cm . Loading the detergent The cleaning detergent should be introduced into the two containers “Comp.2” and “Comp.3” (see table at the end of the page). 7 8 2 3 5 5 5 5 1 5 5 5 6 4 5 Loading the Rinse Aid The amount of rinse aid used for each cycle can be regulated by turning the dose adjuster ‘F’ which you will find under lid ‘C’.There are 6 different settings; the normal dosage is setting 5. D 5 5 5 Comp.2 Comp.3 F 5 3 3 3 3 3 3 3 3 3 3 5 3 7 2 3 7 1 1 1 1 1 1 1 1 1 1 1 1 8 4 This basket is equipped with two removable grids: insert the cutlery one by one into the slots, with the handles at the bottom. Position them so that they don't touch. 6 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 4 4 C 2 door side EN 50242 IEC/ DIN 14 Eco Cycle Total detergent *Eco + extra dry * Press the extra dry button, if existing. 30 gr. 30 gr. Comp.2 25 30 Comp.3 5 After Sales Service "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12 months parts and labour guarantee expires we offer the following after sales service options: Repair Service and Information Help Desk UK: 08709 066066 www.theservicecentre.co.uk Republic of Ireland: 1850 302 200 Note: Our operators will require the Model number and the Serial number of your appliance Available 364 days white goods repair include a If you require any a year with a fast, effective and value for money service. We have the largest service in the UK with over 1200 of our own fully trained engineers. All repairs parts and labour guarantee for 12 months from the date of the repair. information or have any questions about your appliance, our operators are on hand with help and advice. All this ensures that you will receive the best available after sales service possible. Extended Warranties UK: 08709 088 088 www.theservicecentre.co.uk Republic of Ireland: 1850 502 200 Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover plans to give you total peace of mind. l Repair Protection Plan FREE service repairs for a single Hotpoint appliance during the period of cover. l Kitchen Cover FREE service repairs for all your Hotpoint appliances less than 8 years old. Genuine Parts and AccessoriesUK: 08709 077 077 www.theservicecentre.co.uk Republic of Ireland: (01) 842 6836 A wide range of genuine parts and accessories are available from our hotline or through our web site. Genuine parts and accessories, extended warranties and service repairs are all available on our web-site at: www.theservicecentre.co.uk 15 Guarantee "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money back. All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free replacement parts for the first 5 years (except microwaves, selected integrated appliances and cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer. Guarantee terms and conditions Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the following provisions that your appliance: l Has been installed and used correctly in accordance with this instruction booklet. l Has been used solely for domestic purposes and is located on domestic premises (ie. not for commercial or trade use). l Has been properly connected to a suitable electrical supply voltage as stated on the appliance rating plate. l Has not been subject to misuse, accident, modified or repaired by anyone other than one of our own service engineers. For pre purchase information on any other Hotpoint product call: 08701 50 60 70 or visit: www.hotpoint.co.uk Recycling & Disposal Information As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage. Please dispose of packaging and old appliances carefully. To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket and the door cannot be locked shut. 16 D ISHWASHER Notes 17 D ISHWASHER Notes 18 D ISHWASHER Notes 19 Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.uk Republic of Ireland: 1850 302 200 Note: Our operators will require the following information: Model number: Serial number: Extended Warranties UK: 08709 088 088 (Open 8 to 8 Mon - Sun) www.theservicecentre.co.uk Republic of Ireland: 1850 502 200 Genuine Parts and Accessories UK: 08709 077 077 (Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat) www.theservicecentre.co.uk Republic of Ireland: (01) 842 6836 Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB. 195042147.03 December 2004
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 20 Create Date : 1910:41:20 11:21:44 Producer : Acrobat Distiller 3.0 for Windows Author : admin Creator : PageMaker 6.5 Title : 042147gb.p65EXIF Metadata provided by EXIF.tools