Hp 3Par Storeserv 7450 2 Node Base Users Manual 7000 Storage SmartStart 1.x Software Guide

2015-01-05

• HP 3PAR StoreServ 7000 Storage SmartStart 1.2 Software User's Guide
• Part I Using SmartStart to Configure Storage
  • Welcome
  • 1 Prepare to Configure
    • FAQ
  • 2 Setting Up the Service Processor
    • Accessing the Service Processor Setup Wizard
    • Configuring Service Processor Networking
    • Configuring Remote Support
    • Configuring System Support Information
    • Configuring Your Time Zone
    • Changing Passwords
    • Troubleshooting
      • Troubleshooting the Connection to the Service Processor
      • Troubleshooting Duplicate IP Address Issues
      • Troubleshooting “Page Not Found” IP Address Issues
  • 3 Setting Up the HP 3PAR StoreServ Storage System
    • Locating the Serial Number
    • Configuring Networking
    • Configuring Your Time Zone
    • Changing the HP 3PAR StoreServ Storage System Password
    • Monitoring Setup Progress
    • Continuing SmartStart Setup
      • Troubleshooting: Adding the Storage System to the Service Processor
      • Setting Up Local Notification
    • Validating Remote Support
    • Troubleshooting System Setup
      • Collecting SmartStart Log Files
      • Collecting Service Processor Log Files
      • Contacting HP Support about System Setup
      • Verifying the HP 3PAR OS on the Service Processor
  • 4 Connect to the HP 3PAR StoreServ 7000 Storage System
  • 5 Configure the Hosts
    • Configure the Fibre Channel Host
      • Introduction to Configuring the Fibre Channel Host
      • Connect to the Fibre Channel Host System
      • Validate the Fibre Channel HBA Setup on the Host
      • Validate the Fibre Channel Connection
      • Configure Multipath I/O (MPIO)
      • Install and Start Host Explorer
      • Summary: Fibre Channel Host Configuration
    • Configure the iSCSI Host
      • Introduction to Configuring the iSCSI Host
      • Connect to the iSCSI Host System
      • Configure Multipath I/O (MPIO)
      • Start the iSCSI Initiator
      • Configure the iSCSI Port
      • Configure the iSCSI Target
      • Install and Start Host Explorer
      • Summary: iSCSI Host Configuration
  • 6 Configure Storage
    • Create Hosts
      • Welcome to the Create Host Wizard
      • Host Settings
      • Fibre Channel Settings
      • iSCSI Settings
      • Summary
    • Create Virtual Volumes
      • Welcome to the Create Virtual Volumes Wizard
      • Configure Virtual Volume
      • Policies and Geometry
      • Summary
    • Export Virtual Volumes
      • Welcome to the Export Virtual Volumes Wizard
      • Export
      • Summary
    • Add Virtual Volumes to Windows
      • Introduction to Adding Virtual Volumes to Windows
      • Connect to the Host
      • Add Virtual Volumes to Windows
      • Summary: Add Virtual Volumes to Windows Wizard
  • 7 Install the HP 3PAR Management Console
• Part II Understanding Storage
  • 8 Storage Software Components
  • 9 Hosts
    • Creating and Removing Hosts
    • Host Personas
    • The Host Explorer Software Agent
  • 10 Common Provisioning Groups
  • 11 Virtual Volumes
    • Virtual Volume Types
    • Physical Copies
    • Virtual Copies
  • 12 Exporting Virtual Volumes
    • VLUN Templates and Active VLUNs
  • 13 RAID
    • RAID Types
  • 14 User Roles and Rights
  • 15 Managing Storage
• Part III Additional Resources
  • 16 Additional Resources
  • 17 Support and Other Resources
    • Contacting HP
    • HP 3PAR documentation
    • Typographic conventions
    • HP 3PAR branding information
  • 18 Documentation feedback
• Glossary