Hp 9000 Rp8420 32 Pa 8900 16X1 10Ghz 3Mb Server Installation Manual A6912 96024 En

2015-01-05

• 1 Introduction
  • Overview
    • Front Panel
      • Front Panel Indicators and Controls
      • Status LEDs
    • Cell Board
    • System Backplane
    • I/O Subsystem
    • Core I/O Card
      • Internal Disk Devices for the HP 9000 rp8420 server
• 2 Installation
  • Inspecting the Server Cabinet
  • Receiving the Server Cabinet
    • Securing the Cabinet
  • Stand Alone and To Be Racked Systems
  • Manual Lifting
  • Using the RonI Model 17000 SP 400 Lifting Device
  • Wheel Kit Installation
    • Top and Side Cover Removal and Installation
      • Removing the Top Cover
      • Installing the Top Cover
      • Removing the Side Cover
      • Installing the Side Cover
  • Power Distribution Unit
  • Installing Accessories
    • Installing Add-On Products
      • Embedded Disks
    • PCI/PCI-X Card Cage Assembly I/O Cards
  • Cabling and Power Up
    • Voltage Check
    • Voltage Check (Additional Procedure)
    • Connecting AC Input Power
    • Applying Power to the HP 9000 rp8420 server
    • Installing the Line Cord Anchor (rack mounted servers)
      • Four Cell Server Installation (rp8400, rp8420, rp8440, rx8620, rx8640)
    • MP Core I/O Connections
    • Setting Up the CE Tool (PC)
      • Setting CE Tool Parameters
      • Connecting the CE Tool to the Local RS-232 Port on the MP
    • Turning On Housekeeping Power and Logging In to the MP
    • Configuring LAN Information for the MP
    • Accessing the Management Processor through a Web Browser
    • Verifying Presence of the Cell Boards
    • Configuring AC Line Status
    • Booting the HP 9000 rp8420 server
      • Selecting a Boot Partition Using the Management Processor
      • Verifying the System Configuration Using Boot Console Handler
      • Booting HP-UX Using Boot Console Handler
    • Adding Processors with Instant Capacity On Demand
    • Using the Checklist