Hp Client Bridge M111 Users Manual ProCurve Management And Configuration Guide

2015-02-09

• Management and Configuration Guide for HP HP ProCurve M111 Client Bridge
  • Copyright and Disclaimer Notices
  • Contents
  • Chapter 1: Introduction
    • About this guide
      • Products covered
      • Important terms
      • Conventions
        • Warnings and cautions
        • Commands and program listings
    • Introducing the M111 Client Bridge
      • Key features
    • Safety information
      • Professional Installation Required
      • Servicing
    • HP ProCurve Networking support
      • Before contacting support
    • Online documentation
  • Chapter 2: Getting started
    • Deploying the M111
    • Scenario 1: Connecting wired devices to a wireless network
      • Overview
      • Configuration procedure
        • A. Configure your computer
        • B. Connect to the M111
        • C. Start the M111
        • D. Connect to the management tool and login
        • E. Set the M111 IP address
        • F. Configure a station profile
        • G. Connect the wired computers to the M111
    • Scenario 2: Connecting a wired device using MAC address cloning
      • Overview
      • Configuration procedure
        • A. Configure your computer
        • B. Connect to the M111
        • C. Start the M111
        • D. Connect to the management tool and login
        • E. Set the M111 IP address
        • F. Configure a station profile
        • G. Configure MAC cloning options
        • H. Connect the wired device to the M111
    • Scenario 3: Connecting a serial device to a wireless network
      • Overview
      • Configuration procedure
        • A. Configure your computer
        • B. Connect to the M111
        • C. Start the M111
        • D. Connect to the management tool and login
        • E. Set the M111 IP address
        • F. Configure a station profile
        • G. Configure the serial connection
  • Chapter 3: Working with the M111
    • Management tool
      • Starting the management tool
      • Customizing management tool settings
        • Manager and Operator accounts
        • Security policies
        • Security
        • Web server
        • Auto-refresh
    • IP address configuration
      • To configure IP addressing
    • Radio configuration
      • Wireless range
      • To configure the radio
        • Wireless mode
        • Restrict channels to
        • Antenna selection
        • Fast roaming threshold Fast roaming delta threshold
        • Fast roaming threshold count
        • Minimum SNR threshold
        • Scan channel delay
        • Fast scan channel delay
        • Roaming persistence
      • Advanced wireless settings
        • RTS threshold
      • Transmit power control
    • Using station profiles to establish a wireless link
      • To add or edit a station profile
        • General
        • Wireless security
        • Quality of service
    • Viewing APs in the neighborhood
      • Field descriptions
    • Configuring Quality of Service (QoS)
      • QoS settings in a station profile
        • Priority mechanisms
        • Upstream DiffServ tagging
      • Creating IP QoS profiles
      • To define an IP QoS profile
        • Settings
    • Connecting serial devices
      • Serial port connector
      • To connect a serial device
    • DNS configuration
    • Handling unsupported traffic
      • To forward unsupported traffic
      • IP forwarding
    • Cloning the address of a wired device
      • Limitations
      • Enabling Ethernet MAC cloning
      • Wireless access to the M111 when MAC cloning is active
        • Setting up management traffic interception
    • Using filters to restrict wireless traffic
    • Assigning a management address
      • To assign a management address
    • SNMP
      • Attributes
      • v1/v2c communities
      • v3 users
      • Notification receivers
      • Security
    • Managing certificates
      • 802.1X certificates
        • 802.1X — Install TLS client certificate
        • 802.1X — Manage TLS client certificates
        • 802.1X — Trusted CA certificates
        • 802.1X — Manage CA certificates
      • Certificate stores
        • Trusted CA certificate store
        • Certificate and private key store
      • Certificate usage
        • Changing the certificate assigned to a service
        • About certificate warnings
    • Configuration file management
      • Manual configuration file management
        • Backup configuration
        • Reset configuration
        • Restore configuration
      • Scheduled operations
    • Software updates
      • Performing an immediate software update
      • Performing a scheduled update
  • Appendix A: Regulatory information
    • Notice for U.S.A.
    • Notice for Canada
    • Notice for the European Community
      • Disposal of Waste Equipment by Users in Private Household in the European Union
    • Supported External Antennas
    • Notice for Brazil
    • Notice for Japan
    • Notice for Taiwan
    • Notice for Korea
  • Appendix B: Resetting to factory defaults
    • How it works
      • Using the Reset button
      • Using the management tool