Hp Compaq Elite 8300 Convertible Minitower Pc Reference Guide Inventors CMT IPSM Win8

: Hp Hp-Compaq-Elite-8300-Convertible-Minitower-Pc-Reference-Guide-143566 hp-compaq-elite-8300-convertible-minitower-pc-reference-guide-143566 hp pdf

Open the PDF directly: View PDF .
Page Count: 4

HP Compaq 8300 Elite, CMT Chassis 690357-002 page 1

Illustrated Parts & Service Map

HP Compaq 8300 Elite Business PC

Convertible Minitower

© 2012 Hewlett-Packard Development Company, L.P. The information con-

tained herein is subject to change without notice. HP shall not be liable for tech-

nical or editorial errors or omissions contained herein. Intel, Pentium, Intel

Inside, and the Intel logo are trademarks or registered trademarks of the Intel

Corporation and its subsidiaries in the U. S. and other countries.

Document Number 690357-002. 2nd Edition December 2012.

Key Specifications

Spare Parts

System Unit

Cables

Processor Type Intel® Core i7, i5, i3, Pentium®

RAM Type

Non-ECC DDR3 PC3-12800 (1600 MHz)

Maximum RAM 32 GB

Expansion Slots • (2) PCIe-x16

• (1) PCIe-x1

• (3) PCI

Chipset Intel Q77 Express

Graphics Adapter Integrated Intel HD graphics

Bays • (1) card reader

• (2) external 5.25-inch

• (3) internal 3.5-inch

I/O Interfaces Front: (4) USB 2.0 ports, headphone jack, microphone jack

Rear: (4) USB 3.0 ports, (2) USB 2.0 ports, DisplayPort 1.1a,

VGA video, serial port, PS/2 mouse and keyboard, RJ-45 net-

work interface, 3.5mm audio in/out jacks

Preinstalled Operating

Systems • Windows® 8

• Windows 7

• FreeLnx

System Unit

1 Access panel 646819-001

2 Front bezel - 8300 models 689380-001

* Front bezel - 8380 models 689381-001

3 Power supply, 320W, 90% efficient 613764-001

* Power supply, 320W 613765-001

4 Chassis not spared

* 5.25-inch bezel blank 570838-001

* 3.5-inch bezel blank 583653-001

* Not shown

Cables

1 Power switch/LED assembly 646820-001

2 SATA optical drive power cable 646832-001

3 Front USB, I/O assembly 646821-001

4 SATA hard drive power cable 646831-001

* SATA cable, 18 inch, 1 straight end, 1 angled end 639958-001

* SATA cable, 17.7 inch, 2 straight ends 639959-001

* DMS-59 to dual VGA cable 463023-001

* Adapter, DisplayPort to VGA 603250-001

* Adapter, DisplayPort to DVI 484156-001

* Adapter, DisplayPort to HDMI 617450-001

* DisplayPort cable 487562-001

*Not shown

Keyboards (not illustrated)

PS/2 (standard/Windows 8)

USB (standard/Windows 8)

USB, silver/black (Windows 8)

Wireless (standard/Windows 8)

Washable (standard/Windows 8)

Smart card (standard/Windows 8)

USB, hub

537745-xx1/701428-xx1

537746-xx1/701424-xx1

701429-xx1

674314-xx1/701426-xx1

613125-xx1/700510-xx1

631411-xx1/701427-xx1

631913-xx1

Arabic -17x LA Spanish -16x

Belgian -18x Norwegian -09x

Brazilian Portuguese -20x People’s Republic of China

-AAx

Bulgaria -26x Portuguese -13x

Czech -22x Romanian -27x

Danish -08x Russian -25x

Finnish -35x Saudi Arabia -DEx

French -05x Slovakian -23x

French Canadian -12x South Korea -KDx

German -04x Spanish -07x

Greek -15x Swedish -10x

Hebrew -BBx Swiss -11x

Hungarian -21x Taiwanese -ABx

International -37x Thai -28x

International English -L3x Turkish -14x

Italian -06x U.S. -00x

Japanese -29x U.K. -03x

Mass Storage Devices (not illustrated)

Optical Drives

16X SATA DVD-ROM drive 581599-001

16X SATA DVD±RW drive 660408-001

Blu-ray BD-RW SuperMulti DL Drive 656792-001

Hard Drives

1 TB, 7200 rpm SATA hard drive 636930-001

500 GB, 7200 rpm SATA hard drive 636929-001

250 GB, 7200 rpm SATA hard drive 636927-001

256 GB Solid State Drive (SSD), self-encrypting (SED), SATA 6.0* 680020-001

180 GB Solid State Drive (SSD), SATA 6.0* 696622-001

160 GB Solid State Drive (SSD), SATA 3.0* 646809-001

128 GB Solid State Drive (SSD), SATA 2.0* 665961-001

120 GB Solid State Drive (SSD), SATA 2.0* 661841-001

20 GB Solid State Drive (SSD), SATA* 683305-001

*2.5-inch solid-state drives require an adapter for installation.

HP Compaq 8300 Elite, CMT Chassis 690357-002 page 2

Boards Misc Parts

Standard and Optional Boards

System boards (include replacement thermal material)

1 System board for use in models without Windows 8 657096-001

* System board for use in models with Windows 8 Standard 657096-501

* System board for use in models with Windows 8 Professional 657096-601

Memory modules (PC3-12800, CL11)

*8-GB 689375-001

*4-GB 671613-001

22-GB 671612-001

PCI expansion cards

* nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB 680653-001

* nVidia Quadro NVS300 PCIe x16 graphics card, 512 MB 632486-001

* AMD Radeon HD7450 PCIe x16 graphics card, 1 GB 682411-001

* AMD Radeon HD6350 PCIe x16 graphics card, 512 MB 637995-001

* AMD FirePro 2270 PCIe x16 graphics card, 512-MB 637213-001

* Intel PRO/1000CT2 NIC, includes bracket 635523-001

* HP FireWire / IEEE 1394a PCIe x1 Card 637591-001

* HP WLAN 802.11 g/n 1x2 PCIe NIC 538048-001

Processors (include thermal material)

Intel Core i7 processors (8-MB L3 cache)

3770, 3.4 GHz 688164-001

Intel Core i5 processors (6-MB L3 cache)

3570, 3.4 GHz 688162-001

3470, 3.2 GHz 687943-001

Intel Core i3 processors (3-MB L3 cache)

2130, 3.4 GHz 665120-001

2120, 3.3 GHz 638629-001

Intel Pentium processors (3-MB L3 cache)

G870, 3.1 GHz 691936-001

G860, 3.0 GHz 665123-001

G640, 2.8 GHz, 691935-001

Miscellaneous Parts

1 Fan sink 643907-001

2 Chassis fan, 92mm x 92mm 643908-001

3 Printer port, PCI card 638817-001

4 Solenoid lock 641498-001

5 Hood sensor 638816-001

6 Speaker, 40mm x 70mm 645330-001

7 Clamp Lock Kit, includes universal cable (plate not included) 508987-001

* Serial port, PCI card 638815-001

* eSATA port assembly 645558-001

* 2.5-in drive adapter 586721-001

* Grommet, hard drive isolation, blue 594220-001

* Card reader, 22-in-1 636166-001

* USB powered speakers 636917-001

* Mouse, PS2, optical, jack black 537748-001

* Mouse, USB, HP Elite 674318-001

* Mouse, washable 619580-001

* Mouse, wireless, HP Elite 674317-001

* Mouse, USB, optical, jack black 537749-001

* HP Business Digital Headset 642738-001

* External USB webcam 609252-001

* Foot kit 370708-001

* Hard drive conversion bracket 397117-001

* Antenna for use with 538048-001 583345-001

*Not shown

HP Compaq 8300 Elite, CMT Chassis 690357-002 page 3

System Setup and Boot

Access the Setup Utility during computer boot by pressing the F10 key. If you do not

press F10 at the appropriate time, you must restart the computer and again press F10

when the monitor light turns green. NOTE: Not all settings are available for all models.

Password Security

Establishing a Setup or Power-On password:

1. Turn on or restart the computer.

2. As soon as the computer turns on, press the Esc key while “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

3. Press the F10 key to enter Computer Setup.

4. To establish Setup password, select Security > Setup Password and follow the instructions.

- or -

To establish a Power-On password, select Security > Power-On Password and follow the

instructions on the screen

5. Before exiting, click File > Save Changes and Exit.

Changing a Setup or Power-On password:

1. Turn on or restart the computer.

To change the Setup password, go to step 2.

To change the Power-on password, go to step 3.

2. To change the Setup password, as soon as the computer turns on:

- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.

- Press the F10 key to enter Computer Setup.

3. When the key icon appears, type your current password, a slash (/) or alternate delimiter

character, your new password, another slash (/) or alternate delimiter character, and your new

password again as shown:

current password/new password/new password.

NOTE: Type the new password carefully since the characters do not appear on the screen.

4. Press Enter.

The new password will take effect the next time the computer is restarted.

Deleting a Power-On or Setup password

1. Turn on or restart the computer.

To delete the Setup password, go to step 2.

To delete the Power-On password, go to step 3.

2. To change the Setup password, as soon as the computer turns on:

- Press the Esc key while “Press the ESC key for Startup Menu” message is displayed.

- Press the F10 key to enter Computer Setup.

3. When the key icon appears, type your current password followed by a slash (/) or alternate

delimiter character as shown. Example: currentpassword/

4. Press Enter.

Clearing CMOS

1. Turn off the computer and disconnect the power cord from the power outlet.

2. Remove the access panel.

3. On the system board, press and hold the CMOS button for 5 seconds.

4. Replace the chassis access panel and reconnect the power cord.

5. Turn on the computer and allow it to start.

Computer Setup Menu

Heading Option/Description

File System Information - Lists the following main system specifications:

• Product name

• SKU number (some models)

• Processor type/speed/stepping

• Cache size (L1/L2/L3)

• Installed memory size/speed/ch

• Integrated MAC Address

• System BIOS

• Chassis serial number

• Asset tracking number

• ME firmware version

• ME management mode

About - Displays copyright notice.

Set Time and Date - Allows you to set system time and date.

Replicated Setup - Allows you to save or restore system configuration to/

from a USB flash drive.

Default Setup - Allows you to save current settings as default or restore

factory settings as default.

Apply Defaults and Exit - Applies the selected default settings and clears

any established passwords.

Ignore Changes and Exit - Exits Computer setup without saving changes.

Save Changes and Exit - Saves changes to system configuration or

default settings and exits Computer Setup.

Storage Device Configuration - Lists all installed BIOS-controlled storage

devices. The following options are available:

• CD-ROM

• Hard Disk

• Default Values

• Translation Mode

• SSD Life Used

• SMART (ATA disks only)

• Diskette

• SATA Defaults

Storage Options - Allows you to set:

• eSATA Port - Set SATA port as eSATA port for use with external drive.

• SATA Emulation - Choose how the SATA controller and devices are

accessed by the OS. SATA Emulation choices are AHCI, RAID, or IDE.

• Removable Media Boot - Enables/disables ability to boot the system

from removable media.

• Max eSATA Speed - Allows you to choose 1.5 Gbps or 3.0 Gpbs as

the maximum eSATA speed. By default, the speed is limited to 1.5

Gbps for maximum reliability.

DPS Self-Test - Execute self-tests on ATA hard drives capable of per-

forming the Drive Protection System (DPS) self-tests.

Boot Order - Specify boot order for UEFI and legacy boot sources. Also

specify hard drive boot order.

• Shortcut to Temporarily Override Boot Order

Security

Setup Password - Set and enable the setup (Admin) password.

Power-On Password - Set and enable power-on password.

Password Options - Allows to you enable/disable:

• Lock Legacy Resources

• Setup Browse Mode

• Password prompt on F9 & F12

• Network Server Mode

Smart Cover - Allows you to lock/unlock the smart cover and set the

cover removal sensor to disable/notify user/setup password.

Device Security - Set Device Available/Device Hidden for: embedded security

device, system audio, network controller, USB controller, serial/parallel ports,

and SATA ports.

USB Security - Set Device Available/Device Hidden for front USB ports,

rear USB ports, internal USB ports, accessory USB ports.

Slot Security - Disable the PCI, PCIe, and Mini Card slots.

Network Boot - Enables/disables boot from OS (NIC models only).

System IDs - Allows you to update asset tag, ownership tag, UUID, key-

board locale setting.

Master Boot Record Security - enables/disables MBR.

System Security - Allows you to set:

• Data Execution Prevention (enable/disable)

• SVM CPU Virtualization (enable/disable).

• Virtualization Technology (VTx) (enable/disable)

• Virtualization Technology/Directed IO (VTd) (enable/disable)

• Trusted Execution Technology (enable/disable)

• Embedded Security Device (enable/disable)

• Reset to Factory Settings (Do not reset/Reset)

• Measure boot variables/devices to PCR1 (enable/disable)

• OS management of Embedded Security Device (enable/disable)

• Reset of Embedded Security Device through OS (enable/disable)

• No PPI provisioning (Windows 8 only; enable/disable)

• Allow PPI policy to be changed by OS (enable/disable)

DriveLock Security - Allows you to assign or modify a master or user

password for hard drives.

Secure Boot Configuration (Windows 8 only)

• Legacy Support (enable/disable)

• Secure Boot (enable/disable).

• Key Management (enable/disable)

• Fast Boot (enable/disable)

Power OS Power Management - Allows you to enable/disable Runtime Power

Management, Idle Power Savings, Unique Sleep State Blink Rates.

Hardware Power Management - Enable/disable SATA power management,

S5 maximum power savings., PCI slots, network controller, USB 3.0 controller

Thermal - Control minimum fan speed.

Advanced Power-On Options - Allows you to set:

• POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days)

• POST messages (enable/disable)

• Press the ESC key for Startup Menu (enable/disable)

• Option ROM Prompt (enable/disable)

• After Power Loss (off/on/previous state)

• POST Delay (none, 5, 10, 15, 20, or 60 seconds)

• Remote Wakeup Boot Source (remote server/local hard drive)

• Factory Recovery Boot Support (enable/disable)

• Bypass F1 Prompt on Configuration Changes (enable/disable)

BIOS Power-On - Set the computer to turn on at a preset time.

Advanced

(continued)

Bus Options - Allows you to enable/disable PCI SERR# Generation and

PCI VGA palette snooping.

Onboard Devices - Allows you to set resources for or disable on-board

system devices.

Device Options - Allows you to set:

• Printer mode (Bi-Directional, EPP + ECP, Output Only)

• Num Lock State at Power-on (off/on)

• Integrated Video (enable/disable)

• Integrated Graphics (Auto/Disable/Force)

• Internal Speaker (enable/disable)

• NIC PXE Option ROM Download (enable/disable)

• SATA RAID Option ROM Download (enable/disable)

• Multi-Processor (enable/disable)

• Hyper-threading (enable/disable)

• Turbo Mode (enable/disable)

VGA Configuration - Allows you to specify which VGA controller is the

“boot”/primary. Displayed only if add-in video card installed.

AMT Configuration - Allows you to set:

• AMT (enable/disable)

• Unconfigure AMT/ME (enable/disable)

• Hide Unconfigure ME Confirmation Prompt (enable/disable)

• Watchdog Timer (enable/disable)

Diagnostic LEDs

LED Color LED Activity State/Message

Power Green On Computer on

Power Green 1 blink every 2 seconds Normal Suspend Mode

Power Red 1 blink every second followed

by a 2 second pause CPU thermal shutdown

Power Red 3 blinks, 1 blink every second

followed by a 2 second pause Processor not installed

Power Red 4 blinks, 1 blink every second

followed by a 2 second pause Power failure (power supply overload)

Power Red 5 blinks, 1 blink every second

followed by a 2 second pause Pre-video memory error

Power Red 6 blinks, 1 blink every second

followed by a 2 second pause Pre-video graphics error

Power Red 7 blinks, 1 blink every second

followed by a 2 second pause System board failure (ROM

Power Red 8 blinks, 1 blink every second

followed by a 2 second pause Invalid ROM based on Checksum

Power Red 9 blinks, 1 blink every second

followed by a 2 second pause System powers on but is unable to boot

Power Red 10 blinks, 1 blink every second

followed by a 2 second pause Bad option card

Power Red 11 blinks, 1 blink every second

followed by a 2 second pause Current processor does not support a

feature previously enabled.

none none System does not power on and

LEDs are not flashing System unable to power on

HP Compaq 8300 Elite, CMT Chassis 690357-002 page 4

System Board

System Board Connectors and Jumpers (component location may vary)

PWRCPU CPU power connector ESATA eSATA connector, or 2nd ODD if a 3rd HDD exists

XUI Processor socket COMB Serial port

CPUFAN CPU/heat sink fan connector PCI3 PCI slot 3

DIMM1-4 Memory sockets PCI2 PCI slot 2

SATA PWR1

Hard drive power connector PCI1 PCI slot 1

SATA PWR0

Optical drive power connector HLCK Hood lock connector

PWR CMD Power connector FRONT AUD Front panel connector

PWR Main power connector PAR Parallel port connector

MEDIA

Media card reader connector

X4PCIEXP PCI Express x16 downshifted to a x4

FRONT_USB2

2nd USB connector

BAT

RTC battery socket

FRONT_USB 1st USB connector X16PCIEXP PCIe X16 slot

MEDIA2 Media card reader connector X1PCIEXP1 PCIe X1 slot

PB/LED Power switch connector HSENSE Hood sensor connector

CMOS CMOS header CHFAN2 System fan connector

PSWD Password header IN/OUT Audio connectors

SATA2 2nd SATA hard drive USB USB ports

SATA0 1st hard drive (SATA3.0) RJ45/USB

Ntwrk connector/USB ports

SATA1 2nd hard drive (SATA 3.0)

DISPLAYPORT

DisplayPort connector

SPKR Speaker connector VGA+RS232 Monitor connector

SATA3 2nd ODD, or 1st ODD if a 3rd HDD exists (SATA 2.0) PS2 PS/2 Mouse/keyboard connectors