Hp Compaq Elite 8300 Ultra Slim Pc Reference Guide Inventors USDT IPSM Win8
2015-01-05
: Hp Hp-Compaq-Elite-8300-Ultra-Slim-Pc-Reference-Guide-143581 hp-compaq-elite-8300-ultra-slim-pc-reference-guide-143581 hp pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Illustrated Parts & Service Map HP Compaq 8300 Elite Business PC Ultra Slim Desktop Cable and accessory © 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HP shall not be liable for technical or editorial errors or omissions contained herein. Intel, Pentium, Intel Inside, and the Intel logo are trademarks or registered trademarks of the Intel Corporation and its subsidiaries in the U. S. and other countries. Document Number 690359-002. 2nd Edition December 2012. 1 Optical drive cable/connector 605163-001 * Adapter, DisplayPort to VGA 603250-001 * Adapter, DisplayPort to DVI 484156-001 * Adapter, DisplayPort to HDMI 617450-001 * DisplayPort cable 487562-001 * Not shown Keyboards (not illustrated) PS/2 (standard/Windows 8) USB (standard/Windows 8) USB, silver/black (Windows 8) Wireless (standard/Windows 8) Washable (standard/Windows 8) Smart card (standard/Windows 8) USB, hub Key Specifications Processor Type Intel® Core i7, i5, i3, Pentium® RAM Type Non-ECC DDR3 PC3-12800 (1600 MHz) SODIMM Maximum RAM 16 GB Expansion Slots (Low profile) • • • mini-PCI express MXM mSATA 537745-xx1/701428-xx1 537746-xx1/701424-xx1 701429-xx1 674314-xx1/701426-xx1 613125-xx1/700510-xx1 631411-xx1/701427-xx1 631913-xx1 Arabic -17x LA Spanish -16x Belgian -18x Norwegian -09x Brazilian Portuguese -20x People’s Republic of China -AAx Bulgaria -26x Portuguese -13x Czech -22x Romanian -27x Danish -08x Russian -25x Finnish -35x Saudi Arabia -DEx French -05x Slovakian -23x French Canadian -12x South Korea -KDx German -04x Spanish -07x Greek -15x Swedish -10x Hebrew -BBx Swiss -11x Hungarian -21x Taiwanese -ABx International -37x Thai -28x Chipset Intel Q77 Express International English -L3x Turkish -14x Graphics Adapter Integrated Intel HD graphics Italian -06x U.S. -00x Bays • • • Japanese -29x U.K. -03x I/O Interfaces Front: (4) USB 2.0 ports, headphone jack, microphone jack Rear: (4) USB 3.0 ports, (2) USB 2.0 ports, (2) DisplayPort 1.1a, VGA video, PS/2 mouse and keyboard, RJ-45 network interface, 3.5mm audio in/out jacks Preinstalled Operating Systems • • • (1) optical drive (1) internal 2.5-inch hard drive (1) Secure Digital Card Reader Windows® 8 Windows 7 FreeLnx Standard and Optional Boards System board (includes replacement thermal material) Spare Parts * System board for use in models without Windows 8 657095-001 * System board for use in models with Windows 8 Standard 657095-501 * System board for use in models with Windows 8 Professional 657095-601 * System board with DisplayPort 1.2 support for use in models without Windows 8 711787-001 * System board with DisplayPort 1.2 support for use in models with Windows 8 Standard 711787-501 * System board with DisplayPort 1.2 support for use in models with Windows 8 Professional 711787-601 Optional boards 1 AMD Radeon HD 7650A (MXM) 687445-001 * Intel Centrino Advanced-N 6205 (802.11a/b/g/n Wi-Fi wireless adapter) 652165-001 Memory modules (PC3-12800, CL11) * 8 GB 689374-001 * 4 GB 689373-001 2 2 GB 689372-001 Intel Core i7 processors (include thermal material) * 3770s, 3.1 GHz, 8-MB L3 cache 689370-001 Intel Core i5 processors (include thermal material) * 3570s, 3.1 GHz, 6-MB L3 cache 695079-001 System Unit * 3475s, 2.9 GHz, 6-MB L3 cache 695078-001 1 689382-001 * 3470s, 2.9 GHz, 6-MB L3 cache 695077-001 Access panel 2 Stand 612496-001 Intel Core i3 processors (include thermal material) 3 Front bezel 689383-001 * 2130, 3.4 GHz, 3-MB L3 cache 665120-001 682320-001 * 2120, 3.3 GHz, 3-MB L3 cache 638629-001 * AC adapter, 180W, 90% efficient * AC adapter, 180W, standard 613766-001 Intel Pentium processors (include thermal material) * AC adapter, 135W, standard 682321-001 * G870, 3.1 GHz, 3-MB L3 cache 691936-001 593230-001 * G860, 3.0 GHz, 3-MB L3 cache 665123-001 * G640, 2.8 GHz, 3-MB L3 cache 691935-001 * Bezel blank * Not shown * Not shown HP Compaq 8300 Elite, USDT Chassis 690359-002 page 1 Common POST Error Messages Screen Message Probable Cause Recommended Action 101-Option ROM Error 1. System ROM checksum error. 1. Verify ROM, reflash if required 2. Remove suspected card, reboot 3. Clear CMOS memory, reboot 4. Replace system board 2. Expansion board option ROM checksum 103-System Board Failure DMA, timers 1. Clear CMOS memory. 2. Remove expansion boards. 3. Replace system board. 164-Memory Size Error and 201-Memory Error Incorrect memory configuration 1. Run Setup (F10). 2. Check DIMMs for proper seating, type, and HP compatibility. 3. Remove DIMMs singularly and reboot to isolate faulty DIMM. 4. Replace system board. 214-DIMM Configuration Warning Populated DIMM configura- Rearrange the DIMMs so that tion is not optimized each channel has the same amount of memory. 301-, 304-Keyboard error Keyboard failure. Check keyboard connection or keys. Check connector for bent of missing pins. Replace keyboard. If 304, possible system board problem. 501-Display Adapter Failure Graphics display controller. 1. Reseat graphics card. 2. Clear CMOS. 3. Check monitor connection. 4. Replace graphics card. 1720-SMART Hard Drive Detects Imminent Failure Hard drive is about to fail. 1. Determine if hard drive is giving correct error message. Enter Computer Setup and run the Drive Protection System test under Storage > DPS Self-test. 2. Apply hard drive firmware patch if applicable. 3. Back up contents and replace hard drive. Miscellaneous Parts 1 Heat sink for use with the processor (includes thermal material) 587456-001 2 Heat sink for use on models with UMA graphics (includes thermal material) 625256-001 Password Security * Heat sink for use on models with discrete graphics cards (includes thermal material) 689369-001 Establishing a Setup or Power-On password: 3 Chassis fan, rear 691352-001 4 Card reader assembly 592685-001 2. As soon as the computer turns on, press the Esc key while “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. 5 Internal speaker - 20mm x 28mm 689384-001 3. Press the F10 key to enter Computer Setup. 6 Front I/O panel 587458-001 7 Rear port cover 646818-001 8 Chassis fan, front 689376-001 4. To establish Setup password, select Security > Setup Password and follow the instructions. - or To establish a Power-On password, select Security > Power-On Password and follow the instructions on the screen 9 Clamp lock, includes universal cable (plate not included) 508987-001 * Optical drive rail (green plastic piece on drive) 594219-001 Changing a Setup or Power-On password: * Hood sensor 638816-001 1. Turn on or restart the computer. * Grommet, hard drive 594220-001 To change the Setup password, go to step 2. To change the Power-on password, go to step 3. * WLAN antenna hardware kit 646811-001 * USB powered speakers 636917-001 * Mouse, PS2, optical, jack black 537748-001 * Mouse, USB, HP Elite 674318-001 * Mouse, washable 619580-001 * Mouse, wireless, HP Elite 674317-001 3. When the key icon appears, type your current password, a slash (/) or alternate delimiter character, your new password, another slash (/) or alternate delimiter character, and your new password again as shown: current password/new password/new password. NOTE: Type the new password carefully since the characters do not appear on the screen. * Mouse, USB, optical, jack black 537749-001 4. Press Enter. * HP Business Digital Headset 642738-001 The new password will take effect the next time the computer is restarted. * External USB Webcam 609252-001 Deleting a Power-On or Setup password 1. Turn on or restart the computer. *Not shown 5. Before exiting, click File > Save Changes and Exit. 2. To change the Setup password, as soon as the computer turns on: - Press the Esc key while “Press the ESC key for Startup Menu” message is displayed. - Press the F10 key to enter Computer Setup. 1. Turn on or restart the computer. To delete the Setup password, go to step 2. To delete the Power-On password, go to step 3. Mass Storage Devices (not illustrated) 2. To change the Setup password, as soon as the computer turns on: - Press the Esc key while “Press the ESC key for Startup Menu” message is displayed. - Press the F10 key to enter Computer Setup. DVD-ROM drive, slim-line 608394-001 DVD±RW and CD-RW Super Multi Double-Layer Combo Drive (slim-line). This kit also includes the drive bracket. 657958-001 500 GB, 7200 rpm, 2.5 inch, self-encrypting (SED), SATA hard drive 696442-001 500 GB, 7200 rpm, 2.5 inch, SATA hard drive 686217-001 Clearing CMOS 320 GB, 7200 rpm, 2.5 inch, self-encrypting (SED), SATA hard drive 634824-001 1. Turn off the computer and disconnect the power cord from the power outlet. 320 GB, 7200 rpm, 2.5 inch, SATA hard drive 639135-001 256 GB Solid State Drive (SSD), self-encrypting (SED), 2.5-inch, SATA 6.0 680020-001 180 GB Solid State Drive (SSD), SATA 6.0 696622-001 160 GB Solid State Drive (SSD), SATA 3.0 646809-001 128 GB Solid State Drive (SSD), 2.5-inch, SATA 2.0 665961-001 120 GB Solid State Drive (SSD), 2.5-inch, SATA 2.0 661841-001 32 GB SATA Solid State Drive (SSD), SATA 686616-001 24 GB mSATA Solid State Drive (SSD), SATA 683306-001 16 GB Solid State Drive (SSD), SATA 688328-001 HP Compaq 8300 Elite, USDT Chassis 3. When the key icon appears, type your current password followed by a slash (/) or alternate delimiter character as shown. Example: currentpassword/ 4. Press Enter. 2. Remove the access panel. 3. On the system board, press and hold the CMOS button for 5 seconds. 4. Replace the chassis access panel and reconnect the power cord. 5. Turn on the computer and allow it to start. 690359-002 page 2 System Setup and Boot Access the Setup Utility during computer boot by pressing the F10 key. If you do not press F10 at the appropriate time, you must restart the computer and again press F10 when the monitor light turns green. NOTE: Not all settings are available for all models. Advanced Bus Options - Allows you to enable/disable PCI SERR# Generation and (continued) PCI VGA palette snooping. Onboard Devices - Allows you to set resources for or disable on-board system devices. Device Options - Allows you to set: • Printer mode (Bi-Directional, EPP + ECP, Output Only) • Num Lock State at Power-on (off/on) • Integrated Video (enable/disable) • Integrated Graphics (Auto/Disable/Force) • Internal Speaker (enable/disable) • NIC PXE Option ROM Download (enable/disable) • SATA RAID Option ROM Download (enable/disable) • Multi-Processor (enable/disable) • Hyper-threading (enable/disable) • Turbo Mode (enable/disable) Computer Setup Menu Heading Option/Description File System Information - Lists the following main system specifications: • • • • • • Product name SKU number (some models) Processor type/speed/stepping Cache size (L1/L2/L3) Installed memory size/speed/ch Integrated MAC Address • • • • • System BIOS Chassis serial number Asset tracking number ME firmware version ME management mode VGA Configuration - Allows you to specify which VGA controller is the “boot”/primary. Displayed only if add-in video card installed. About - Displays copyright notice. Set Time and Date - Allows you to set system time and date. AMT Configuration - Allows you to set: • AMT (enable/disable) • Unconfigure AMT/ME (enable/disable) • Hide Unconfigure ME Confirmation Prompt (enable/disable) • Watchdog Timer (enable/disable) Replicated Setup - Allows you to save or restore system configuration to/ from a USB flash drive. Default Setup - Allows you to save current settings as default or restore factory settings as default. Apply Defaults and Exit - Applies the selected default settings and clears any established passwords. Ignore Changes and Exit - Exits Computer setup without saving changes. Save Changes and Exit - Saves changes to system configuration or default settings and exits Computer Setup. Storage Device Configuration - Lists all installed BIOS-controlled storage devices. The following options are available: LED Color LED Activity State/Message Power Green On Computer on Power Green 1 blink every 2 seconds Normal Suspend Mode Power Red 1 blink every second followed by a 2 second pause CPU thermal shutdown Power Red 3 blinks, 1 blink every second followed by a 2 second pause Processor not installed Power Red 4 blinks, 1 blink every second followed by a 2 second pause Power failure (power supply overload) Power Red 5 blinks, 1 blink every second followed by a 2 second pause Pre-video memory error Power Red 6 blinks, 1 blink every second followed by a 2 second pause Pre-video graphics error DPS Self-Test - Execute self-tests on ATA hard drives capable of performing the Drive Protection System (DPS) self-tests. Power Red 7 blinks, 1 blink every second followed by a 2 second pause System board failure (ROM Boot Order - Specify boot order for UEFI and legacy boot sources. Also specify hard drive boot order. • Shortcut to Temporarily Override Boot Order Power Red 8 blinks, 1 blink every second followed by a 2 second pause Invalid ROM based on Checksum Setup Password - Set and enable the setup (Admin) password. Power Red 9 blinks, 1 blink every second followed by a 2 second pause System powers on but is unable to boot Power Red 10 blinks, 1 blink every second followed by a 2 second pause Bad option card Power Red 11 blinks, 1 blink every second followed by a 2 second pause Current processor does not support a feature previously enabled. none none System does not power on and LEDs are not flashing System unable to power on • • • • CD-ROM Hard Disk Default Values Translation Mode • • • • SSD Life Used SMART (ATA disks only) Diskette SATA Defaults Storage Options - Allows you to set: • eSATA Port - Set SATA port as eSATA port for use with external drive. • SATA Emulation - Choose how the SATA controller and devices are accessed by the OS. SATA Emulation choices are AHCI, RAID, or IDE. • Removable Media Boot - Enables/disables ability to boot the system from removable media. • Max eSATA Speed - Allows you to choose 1.5 Gbps or 3.0 Gpbs as the maximum eSATA speed. By default, the speed is limited to 1.5 Gbps for maximum reliability. Security Diagnostic LEDs Power-On Password - Set and enable power-on password. Password Options - Allows to you enable/disable: • Lock Legacy Resources • Setup Browse Mode • Password prompt on F9 & F12 • Network Server Mode Smart Cover - Allows you to lock/unlock the smart cover and set the cover removal sensor to disable/notify user/setup password. Device Security - Set Device Available/Device Hidden for: embedded security device, system audio, network controller, USB controller, serial/parallel ports, and SATA ports. USB Security - Set Device Available/Device Hidden for front USB ports, rear USB ports, internal USB ports, accessory USB ports. Slot Security - Disable the PCI, PCIe, and Mini Card slots. Network Boot - Enables/disables boot from OS (NIC models only). System IDs - Allows you to update asset tag, ownership tag, UUID, keyboard locale setting. Master Boot Record Security - enables/disables MBR. System Security - Allows you to set: • Data Execution Prevention (enable/disable) • SVM CPU Virtualization (enable/disable). • Virtualization Technology (VTx) (enable/disable) • Virtualization Technology/Directed IO (VTd) (enable/disable) • Trusted Execution Technology (enable/disable) • Embedded Security Device (enable/disable) • Reset to Factory Settings (Do not reset/Reset) • Measure boot variables/devices to PCR1 (enable/disable) • OS management of Embedded Security Device (enable/disable) • Reset of Embedded Security Device through OS (enable/disable) • No PPI provisioning (Windows 8 only; enable/disable) • Allow PPI policy to be changed by OS (enable/disable) DriveLock Security - Allows you to assign or modify a master or user password for hard drives. Secure Boot Configuration (Windows 8 only) • Legacy Support (enable/disable) • Secure Boot (enable/disable). • Key Management (enable/disable) • Fast Boot (enable/disable) Power OS Power Management - Allows you to enable/disable Runtime Power Management, Idle Power Savings, Unique Sleep State Blink Rates. Hardware Power Management - Enable/disable SATA power management, S5 maximum power savings., PCI slots, network controller, USB 3.0 controller Thermal - Control minimum fan speed. Advanced Power-On Options - Allows you to set: • POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days) • POST messages (enable/disable) • Press the ESC key for Startup Menu (enable/disable) • Option ROM Prompt (enable/disable) • After Power Loss (off/on/previous state) • POST Delay (none, 5, 10, 15, 20, or 60 seconds) • Remote Wakeup Boot Source (remote server/local hard drive) • Factory Recovery Boot Support (enable/disable) • Bypass F1 Prompt on Configuration Changes (enable/disable) BIOS Power-On - Set the computer to turn on at a preset time. HP Compaq 8300 Elite, USDT Chassis 690359-002 page 3 System Board System Board Connectors and Jumpers (component location may vary) DIMM3 SODIMM 3 MEDIA Media reader connector DIMM1 SODIMM 1 CMOS CMOS button SATA1 1st optical drive HEADPHONE Headphone connector PWR DC power connector MIC Microphone connector VGA Video connector USB USB connectors (4) PS2 PS/2 mouse/kybd connectors J105 Mini card connector RJ45/USB Ntwrk connector/USB ports MSATA SSD drive connector DISPLAYPORT DisplayPort connector PB Power button IN/OUT Headphone/microphone CMOS CMOS reset button CHFAN2 Fan connector SPKR Speaker connector SATAPWR1 SATA power header CHFAN Front fan connector BAT RTC battery socket PSWD Password header MXM Graphics card connector PROCESSOR Processor socket HSENSE Hood sensor connector HP Compaq 8300 Elite, USDT Chassis 690359-002 page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : VistaTest Create Date : 2003:01:30 15:31:54Z Modify Date : 2012:12:13 16:06:55-06:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : VistaTest Title : Inventors USDT IPSM - Win8.fm Creator Tool : FrameMaker 10.0 Metadata Date : 2012:12:13 16:06:55-06:00 Producer : Acrobat Distiller 9.5.2 (Windows) Document ID : uuid:5816e632-eb9c-4807-9d34-2c809dfe287b Instance ID : uuid:3f59f792-6319-4eec-b753-99b2260c5bc6 Page Mode : UseNone Page Count : 4EXIF Metadata provided by EXIF.tools