Hp Computer Monitor 2309M Users Manual & 2309v_display_Innolux_WEEE_Disassy_January

HP 2309V to the manual de8b034b-1e03-497d-9795-ccf7ddea185d

2015-02-09

: Hp Hp-Computer-Monitor-Hp-2309M-Users-Manual-545889 hp-computer-monitor-hp-2309m-users-manual-545889 hp pdf

Open the PDF directly: View PDF .
Page Count: 15

Download
Open PDF In Browser	View PDF

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 2309m
HP 2309v
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Quantity
of items
Item Description
Notes
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium coin
or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries

4
{Backlight
Assembly (I
type)

Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm

Includes background illuminated displays with gas
discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height

1
(C854
location)

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent
chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

EL-MF877-00
Template Revision A

Page 1

refractory ceramic fibers
Components, parts and materials containing
radioactive substances

2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1: Bushing Screwdriver

(HEX5.5MM)

Description #2: Crossing Screwdriver

Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
2.
3.
4.
5.
6.
7.
8.

Lay the monitor on the desk, remove the VESA mounting cover with hand.
Unlock the 4 screws which they fix the VESA mounting by 2# screwdriver.
Unlock the 4 screws which they fix the stand by 2# screwdriver.
Remove the front bezel with hand from product
Remove the backcover with hand from Product.
Seprate the Keypad and backcover with hand
Unlock the 2 screws which they fix the chassis and panel, and then pull the LVDS out .
Unlock 2 screws for DVI port, D-SUB port, Power port, and 7 screws which they fix between chassis and PCA
boards, power board and IF board. Pull the wires out.
9.
Unlock the 2 screws which they fix between the bottom-side and the base, and then unlock the 12 screws which they
fix between the base and base-cover.
10.
Remove the arm-rear and then unlock the 4 screws which they fix between the arm-front and the rion.
11.
To see the detail process are as attached files including assemble panel.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00
Template Revision A

Page 2

Disassembly Flowchart for HP 2309 Model
Issue Date: Dec. 31, 2008
Initiator: Candy Zheng

Action

Photo

Tool

Lay the Monitor on the desk.

N/A

Remove the VESA mounting cover with
hand.

N/A

Unlock the 4 screws which they fix the
VESA mounting by #2 scewdriver.

#2 Crossing Screw Driver

Unlock the 4 screws which they fix the
stand by 2# screwdriver.

#2 Crossing Screw Driver

Remove the front bezel out with hand.

N/A

Remove the back cover out with hand.

N/A

Unlock the 6 screws which fix the
speaker grill ,and take the sub-bezel out.

Take the keypad out.

Unlock the 2 screws which fix the
chassis and panel, and then pull the
LVDS out .

Unlock 2 screws for DVI port, D-SUB
port, Power port, and 7 screws which
they fix between chassis PCA boards,
power board and IF board. Pull the wires
out.

Unlock the 2 screws which they fix
between the bottom-side and the base,
and then unlock the 12 screws which
they fix between the base and basecover.

#2 Crossing Screw Driver

N/A

#2 Crossing Screw Driver

#2 Crossing Screw Driver and
#1 Bushing Screw Driver

#2 Crossing Screw Driver

Remove the arm-rear and then unlock
the 4 screws which they fix between the
arm-front and the rion.

The panel

#2 Crossing Screw Driver

N/A

Technical Notification
- Sequence of Module Disassembly for Lamp Separation –
( LTM230HT01 )

DATE : Oct. 08, 2008

Application Engineering 1 ,
HD development, LCD Business
Any of information, data and/or records in these documents shall be treated as “CONFIDENTIAL” and no copy thereof shall be
allowed without sender's prior written authorization. The disclosure of these documents shall be made to those who have need to
know or are intended to know.

Sequence of Module Disassembly for Lamp Separation
LTM230HT01 Module front and rare side

Disassemble top chassis and PCB cover

1/3

Sequence of Module Disassembly for Lamp Separation
Disassemble the panel from the Mold frame

Disassemble the mold frame, sheets and diffuser plate from the bottom chassis

2/3

Sequence of Module Disassembly for Lamp Separation
Separate side mold to pull out lamp

Separate lamp from backlight

3/3

Method of lamp disassembly on LM230WF1-TLA3/TLB3

Step 1 : Rear side view

Step 3 : Remove the Cover Shield